Missing slideshow images on only some of my website pages.

This is the address to the website in question www.chartiermotorports.com. My dilema, when I navigate through the website, the slideshow in the header displays on all the pages except, now, when I get to the 'MULTIMEDIA' page then click on any of the photo gallery thumbnails my slideshow does not display. I've been updating images in the slideshow recently whithout any issues then yesterday I updated an image and now the slideshow does not appear on any of the photo gallery pages... 'can't figure this one out...

First off, your link is wrong: chartiermotorsports
You missed off the S from sports.
I'm no expert but until one turns up I have an idea for you to think about.
When you move to one of your gallery pages it appears that you are losing the URL to your slideshow or the javascript. This might be because the gallery folder is one step removed from the root than the other pages.
You might need to change the paths to take account of that added level or move the gallery pages up a level.
Hope I made that clear and like I say, I'm no expert.
Did you define your site in Dreamweaver?
Best of luck
Martin

Similar Messages

Reader mode available on only some of the wiki pages.

Long story short I have a script that runs to create a back up of the info in our wiki. The script is set to change the view to reader mode so that the info extracted is cleaner without all the wiki buttons etc. My issue is that the Lion Server's Wiki does not seem to generate a reader view for all pages only some. Can't seem to find what determins if the page gets the reader option or not. Anyone out there know?

First off, your link is wrong: chartiermotorsports
You missed off the S from sports.
I'm no expert but until one turns up I have an idea for you to think about.
When you move to one of your gallery pages it appears that you are losing the URL to your slideshow or the javascript. This might be because the gallery folder is one step removed from the root than the other pages.
You might need to change the paths to take account of that added level or move the gallery pages up a level.
Hope I made that clear and like I say, I'm no expert.
Did you define your site in Dreamweaver?
Best of luck
Martin

When I start facebook, sometimes it loads ok. But, since v29, it often loads with no photo images or only some photo images shown..just empty boxes.

Facebook loads ok as far as text is concerned. But, it often loads without any of the photo images visible. Sometimes it loads with a few of the images visible. When the images are missing there are just empty boxes where the photos should be. I never had this problem until updating to the latest firefox v29. If you guys can't fix this problem, is there any way to revert back to an earlier version of firefox? tht version worked just fine.

If images are missing then check that you do not block images from some domains.
*Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "Block Images from..." has a checkmark then remove this checkmark to unblock images from this domain.
Make sure that you do not block (third-party) images, the permissions.default.image pref on the about:config page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

Missing "Charts, Images, Text Labels" demo from iWorks Numbers page.

Really just an issue with the number iWorks page on the website.
At the address below, Apple has a few watchable demos:
http://www.apple.com/iwork/numbers/
Intelligent Tables.
Flexible Canvas.
Charts, Images, Text Labels.
and
Interactive Print View.
But the hyperlink listed under "Charts, Images, Text Labels." is the same as the one under "Flexible Canvas."
Does anyone have the actual address that takes you to the "Charts, Images, Text Labels." demo?
for reference, here is the address that is duplicated:
http://movies.apple.com/movies/us/apple/mac/iwork/2007/features/iworkfeatures_flexiblemediarichcanvas_20070807640x400.mov
thanks!

The link below is now available from the iworks page:
http://movies.apple.com/movies/us/apple/mac/iwork/2007/features/iworkfeatures_2dand3dcharts_20070807640x400.mov
Thanks to who ever updated it.

Download link for only some rows

Hi,
I have 2 tables. One contains records for products, and the other contains images for only some of the products. The images have been uploaded through the application and therefore are in a 'upload_data' table.
The tables are linked by product_id.
I would like to display a report that shows all the column from the products table and a download link for only those products that have an image.
So far the query only returns those rows that have an image.
Thanks
Edited by: user12970007 on 20-Apr-2010 17:59

What does this query look like?

How do i make a slideshow lightbox with only one main image

Hi all,
i was wondering How do i make a slideshow lightbox with only one main image being seen on the page and once clicked the lightbox will open and have multiple images viewable from prev/next buttons with comments.
Reason being is i want have a portfolio page with my work all viewable from that one page so i will have say 10 lightboxes on the page but all with one master image.
Cheers,
Chris

hello
I have the same problem... Its so basic thing and is it really missed in muse ?

In my iPhoto library, only some images appear as thumbnails. The rest are blank but appear briefly when scrolling through or properly when double clicked. Any ideas?

In my iPhoto library, only some images appear as thumbnails. The rest are blank but appear briefly when scrolling through or properly when double clicked. Any ideas?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I just tried to import photos from iphone to MacAir but only some came across, many others as dark space. The app thinks I have transferred them all but I want to redo the process and it is not obvious how to do that. I deleted the dark images already,

How may I reimport photos from my iphone 4s to the MacAir iPhoto as only some images came across.. It is not obvious to me, like it is with other programs I have used.

Also, you can have Image Capture automatically open when you connect the phone or any camera. To do that you need to open iPhoto on your Mac (yes, the setting is in iPhoto and that is a bit strange).
Why do I have to buy iPhoto to get to a setting so that I don't have to use iPhoto?!?! Not very Apple-like.
If the device is attached and highlighted in Image Capture, the setting is in the bottom left corner.

On Importing raw images to Lightroom only some of the images will import.

I have used LightRoom for years and just started having this issue. I select all of my raw images and "Open with" LightRoom 5. I can view all of the images that I want to import. It then imports only some. There are times it will import some and then freezes up in Import mode. I have even converted images to dng and found it to do the same thing. As a professional photographer this is frustrating!

If you mean "Open With" in your operating system, I am surprised that you get any images to import this way. As far as I know, Adobe has (tried to) disable this as a method of importing photos, and so I doubt you will find any help here in this forum on this matter, as this is not a function of Lightroom (although you used to be able to do it in earlier versions).

Slideshow imports from iPhoto - missing/distorted images.

When I try and create a slide show using images from iPhoto some images are missing and others badly distorted, I have tried different settings but what I want is manual with dissolve. This used to work with iLife '06 and Tiger (10.4.10).
Any ideas? I really need for this to work.

Any of these help?
http://www.apple.com/support/downloads/ilifesupport811.html
http://www.apple.com/ilife/tutorials/#idvd-create-64
http://docs.info.apple.com/article.html?artnum=302961
http://discussions.apple.com/thread.jspa?messageID=5371420&#5371420
http://www.lqgraphics.com/software/phototomovie.php
http://www.boinx.com/fotomagico/overview/
Message was edited by: SDMacuser

I have created a journal on my iPad 2 and shared it on iCloud, it contains screenshots of webpages, but when i try to view the journal on my desktop only some of the images appear...any ideas?

I have created a journal on my iPad 2 and shared it on iCloud, it contains screenshots of webpages. But when I try to view the journal on my desktop only some of the images appear...any ideas why this is happening?

Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Why can only some machines see netboot images at the startup screen?

I have a 10.6.6 server running as a netboot server. I have about 10 images running on the server that consist of a 10.6.6 and 10.5.8 triage partition and a 10.6.6 and 10.5.8 restore image. Now what I have noticed is that newer machines after starting up and holding down the option key will see all the available images.But on some older intel machines nothing will show up after holding the option key down accept the internal drive itself, But if you hold down the N key it WILL boot to the default image.
I have made sure and checked that the ethernet port was working on the older machines. I also made sure that I can see the images from the startup control panel. All machines can see the netboot images from the startup control panel, but older intel versions cant. However I was able to sometimes get the old white and black macbooks to see the images but others not.
Any suggestions as to why some machines will see the images at the startup screen after holding the option key and why some wont?

That, most likely, means that you have a fairly large number of images and/or they have very long names.
The number of images that can be displayed is limited by the size of the data packet which contains the NetBoot volume information. Two techniques we use to keep this in check are 1) aggressive purging of outdated images, and 2) use of shorter display names (the one seen in Startup Disk, not the one in the NetBootSP0 folder).

DVD Slideshow Images Flickering

I was a Window user. Now I am a new MAC user. I bought iMac mainly to do slideshows and video. I heard that MAC is great for slideshows and videos. iLife is great. But.. There is always a but. This is a big BUT and I sincerely hope that going to MAC is not a disappointment. Here goes.
The slideshows in iPhoto 08 and iDVD 08 are great but after burning into DVD the images flickers.
Some part of the picture flickers not the whole picture. Even the add on text on the picture flickers.
In Windows I used Ulead Movie Factory, it had the same problem until Ulead implemented Anti Flicker option. Selecting this option makes the DVD pictures perfectly still like viewing your photos on the computer.
Is there an Anti Flicker setting in iDVD or iPhoto?
I am not producing DVD slideshow at the moment until I can find a solution as this flickering thingy is infuriating. A still picture must be still and not flickering on certain part of the picture/image. Railway tracks flickers madly, leaves on a tree flickers, blinds flickers, the face flickers, etc
Please helppppppp. Frustrated. I cannot go back to Windows and I do not want to. I am sure others must have this problem too. I pray that I have done something wrong else there won't be a solution until Apple can fix it. Prayyyy
Thanks. Sorry for being so long winded.

Guys,
I am back. Sorry for taking so long. My wife has been grumbling about me spending so much time on the computer, blah, blah..
Again thank you all for all the suggestions. I have look at Photo to Movie tutorial. It is pretty good but I think Fotomagico is better. Yet to try it. Soon I hope.
As what Howard Topoff said, Ken Burns causes the Flickering and he is correct. I created a slideshow in iPhoto without Kenburns and send to iDVD. There are no flickers what so ever. The quality I got is as per Ulead DVD Movie Factory. Now, at least I am getting the same quality as before. I expect it to be better but hey... It is really a pity as I like Ken Burns a lot.
One thing maybe you guys can explain. iPhoto send to iDVD(not exporting) by creating a QT movie. I dragged the QT movie to Toast which has the option to tell you what type of file it is. Toast reported that the QT movie file is MPEG 4 video, 720x540 AND 13.5 fps. I would expect the fps will be around 25 or 30. Shouldn't iPhoto be sending out as high quality as possible so that iDVD will be able to recode it to suit PAL or NTSC? Unbelievable.
It is silly for iPhoto export option which can only export the biggest is large 640x480 and iDVD will have to recode it to 720 x 576 for PAL TV.
I have started to learn iMovie. iMovie has at least the option to set what QT quality is required when I Export Using Quicktime option. I can set whether it is PAL/NTSC/H.264,etc., frame rate, progressive or interlace, aspect ratio, etc. iPhoto has none of these. Is this an Apple oversight? I am doubtful.
Hey, rightly or wrongly, I am beginning to be a sceptic when it comes to Apple's intentions as those things that are missing are basics that should be part of the software.
Hopefully in a few days time, I can post more, not if my wife can help it. Nag, nag, nag.
F Shippey, PAL is 720 x 576. I will try a few photos by resizing as per your suggestions but first I would like to look at iMovie.
Cheers.

Slideshow image quality/color rendering

I´m quite frustrated after discovering that some of my images look quite poor displayed by the slideshow module. My situation ist as follows:
LR 5.2 running on Mac OS X 10.8.5, 1:1 previews are rendered, preview quality is set to high, and I´m using a sample image showing a dark cloudy sky with some fine gradients; my slideshow preset doesn´t use any borders as I read this often causes quality issues.
When I´m in the Develop module, there is no problem at all, even in fullscreen display mode on my 1920x1200 display the gradients are perfectly rendered.
In Library module, when displaying fullscreen, quality is okay, but I can see some slight difference compared to the Develop module - which I understand after reading that in Develop the output is based on the actual raw data, and in all the other modules on rendered previews.
Now, when in Slideshow module, the image quality is significantly lower than in Library and I see some quite obvious banding in the gradients. I don´t have problems with blocking artifacts but the banding/posterization is considerably worse compared to a JPEG export with a quality setting of, for example, 75.
I can´t imagine LR´s slideshow tool would be working with a lower color depth than the 8 bit as in standard JPEGs, right? Did I miss any of LR´s parameters that influence the image quality of Lightroom slideshows or of the previews used therefore? Otherwise do you have some other explanations or hints for me in order to get this fixed? We do everything to capture our images in the best possible quality so we should also be able to present them properly after all...
Thanks a lot for any advice!
Toby

In-Lr slideshow images look like crap on my system too (dull contrast and de-saturated shifted color).
My guess is some issue with icc-profile/monitor-profile or something, but I'm not qualified for assessing.. - could just be a bug in Lr that only bites some, dunno...
I use ShowBiz instead, which works well on my Windows box, and it should also work on your Mac box.
Rob

Question When I do a search for an image I only have a limited number of images. There used to be a ton of pictures on my screen and an unlimited amount of pictures to look through. Is there a way of changing this back to the way it used to be???

Question
When I do a search for an image I only have a limited number of images. There used to be a ton of pictures on my screen and an unlimited amount of pictures to look through. Is there a way of changing this back to the way it used to be???

Thanks. So there's no means of knowing whether a text message has been delivered, not to mention time of delivery. Perhaps I've gone for the wrong phone. It might do a lot but seems to miss out on some basics.

Missing slideshow images on only some of my website pages.

Similar Messages

Maybe you are looking for