Missing Slideshow Settings

I recently upgraded from Aperture 2 to 3.0.2 and am using the Slideshow feature for the first time. I've managed to make a basic slideshow, but when I try to make any customisations, the options just aren't there.
For the Default Settings, all I have are the aspect ratio and the minimum slideshow time while for the Selected Slides settings, I only have photo effect checkbox and the slide time checkbox: none of the other settings identified in the manuals are available, by which I mean they do not exist, not that they're greyed out.
I've tried performing an update, but there apparently is none.
Can anyone help as this is driving me crazy!!
Thanks
OT

Okay, I should have guessed this one - it depends on the theme selected. A bit annoying as it would be nice to configure more aspects of each theme

Similar Messages

My data tab is missing in settings on ipad

My data tab is missing in "settings" on my ipad

What iOS version do you use? I'm nof familiar with the "data tab." Where did you notice it before?

Slideshow settings made impossible by a big black rectangle covering the upper-left half of the screen/photo,

Slideshow settings made impossible by big black rectangle covering the upper-left half of the screen/photo, appearing when I move the cursor. Disappears when I start the slideshow. Restart does not help.

Thanks,
- First: Linc Davis' question seems to be relevant: Indeed, when I disconnect my second display, the problem disappears. However, reconnecting the display makes the problem reappear again.
- I use iPhoto 9.5.1. and Mac OS 9.5.2. The machine is a MacPro first part of 2008 (not a MacBook Pro as I inadvertantly said in my original question). Processor 2X2,8 GHz Quad-core intel Xeon. Memory 6 GB, with new (2yrs old) 2 TB SATA-disk (WDC WD2002FYPS-02w380 Media) as hard disk.
- Here is a screenshot of what I am seeing - with only part of the settings display (in Norwegian) visible.
- I have looked for a solution in the iPhoto settings, turned the program off& on, and restarted the computer, all without success.
- The library is, as I understand it, located in users/[me]/pictures/iPhoto Library.
- No, as I remember I did not apply any updates or upgrades just prior to the problem. I have regularly updated the programs, as they come, without checking the results on each program.
- I run a managed library
- Apparently there is 1,29 TB free space (out of 2 TB) on my boot drive [=central hard drive, see above?].

Slideshow settings not 'sticking'

Hi All,
Have a lot trouble with newly downloaded iPhoto 9.1.1. Specifically, when working with slideshow, settings for individual photos are not being saved.
For example: I select specific 'Ken Burns' settings—zoom settings for instance—for an individual image. They remain as set until an indeterminate amount of time and then are lost. I might be editing the settings for the sixth image in the slideshow before noticing that the settings for the second image have reverted.
Any ideas?
Thanks,
S

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*What's the plist file?*
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
Regards
TD

Problem with SlideShow Settings

Hi
I've just upgraded to iPhoto'09 and it's working great, but I have a problem with the SlideShow settings:
When I choose a face, event or a place and press the "Play" button to start the slide show, I choose the settings I want (like unchecking repeat slide show and checking shuffle slide order), and check "use settings as default), when I close iPhoto or change the face, place or event, settings come back to their original status, not the ones I chose and made as default.
Any Ideas?

That's because you've set the default for that Slideshow, not all slideshows.
Regards
TD

How to save slideshow settings so when I press Ctrl-Enter it does what I want?

How to save slideshow settings so when I press Ctrl-Enter it does what I want?
eh?
R

I tested what you gave me there Rob. On my Mac I have dual monitors:
-Only blackens/show slideshow on one monitor (the main monitor, if I move LR to my secondary monitory, the slideshow is still on the first, but the second still runs normal, with LR just sitting there).
-If I disable slide durration I have to manually advance the slides with the right arrow.
-I don't have "Lightroom" (or with my current settings any) text on the screen.
-Does not repeat.
My Windows machine doesn't have dual monitors, but the others work correctly....
That is, until I thought about this differently. Since we are looking at changing Slideshow settings, I was naturally in the Slideshow module. But then I remembered the whole point of the Impromtu Slideshow was that you can view slideshow playback from any module. Once I returned to Library and clicked Command/Ctrl+Enter, then I saw exactly what you are talking about. Both monitors are blackened, slide duration is ignored, etc.
You know why? Because the Impromptu Slideshow uses one of the templates when outside of the Slideshow Module. Which one? Well, Default +, of course. How do you change that? Right-click (Command-click) the slideshow template you'd rather use and select "Use for Impromptu Slideshow".

Ow do I keep the slideshow settings window from popping up?

every time I start a slideshow in iPhoto 7.1.1, the slideshow settings window keeps on popping up, even if I save the display and music settings.
This is useless and annoying. Where do I change the settings such that I am not asked about the slideshow settings every time anew?
thanks for any help!

2.2 GHz Intel C...:
If your using an album and playing a slideshow with the play button at the bottom of the page hold down the Option key and hit the play button. That will bypass the setting window if you have saved the settings. Those settings will be linked to that album so if you remove the photos and put new ones in the same settings will still be valid.
Barry:
If the slideshow button is not in the toolbar at the bottom go to the View->Show in Toolbar menu and select Slideshow.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Missing Customizing settings for software component ECC-DIMP

Hi all,
While running the T-code IE4n I am getting this error:
Missing Customizing settings for software component ECC-DIMP
This is working fine in IDES ECC 6.0 ,Could u please tell me how to resolve it for my othersystems.
Thanks
Yinyan Lu

Dear Yinyan Lu,
Please, have a look into the SAP note 767108 (IE4N: Problems due to missing notification Customizing)
Solution
To correct this error, implement the correction instructions contained
in this note or import the relevant Support Package.
In packages
o DI in Release 4.6C2
o DIMP in Release 4.71 and higher
o EA-APPL as of Release 4.7 Extension Set 2 and higher
notifications are created when installing and dismantling. In this case,
Customizing must be complete, otherwise errors will occur.
In DI Release 4.6C2 and DIMP Release 4.71 (and higher),
follow the following Customizing path:
Plant Maintenance and Customer Service
    -> Maintenance and Service Processing
      -> Maintenance and Service Notifications
        -> Determine Properties of Notifications for Installing and
Dismantling Parts
Always maintain the notification type for installation and for
dismantling.
Follow the following Customizing path on EA-APPL as of Release 4.7
Extension Set 2 (and higher):
follow the following Customizing path:
Plant Maintenance and Customer Service
    -> Maintenance and Service Processing
      -> Configuration Control
        - > Determine Properties of Notifications for Installing and
           Dismantling Parts.
Always maintain the notification type for installation and for
dismantling.
What must you do if you do not want to use notifications in IE4N?
1. You must always maintain the notification type in accordance with
    Customizing described above.
2. Create an individual, empty implementation for the BADI
    BADI_CCM_NOTIF_GENER. To do this, proceed as follows:
a) Execute transaction SE18.
b) Specify BADI_CCM_NOTIF_GENER as the BADI name.
c) Use the menu <Implementation><create> to create an individual
       implementation with a corresponding name in the Z namespace.
d) You enter the BADI Builder. Name the implementation, and then
       save and activate your implementation. It is important that the
       methods CREATE, FILL_CUST_DATA, MODIFY, SET_HEADER_MESSAGE, and
       PRINT_NOTIF are empty.
Note that these steps are required, since the BADI
    BADI_CCM_NOTIF_GENER is equipped with a default source code that
    includes the use of the notification.
As of ECC600, Note 1368876 replaces error message IEN 126 with error
message IEN 026, which is more precise.
Caution:
o The error message mentioned above indicates that Customizing is
         missing. To correct the problem, you must perform the relevant
         Customizing settings for transaction IE4N.
o As of ECC600, you do not have to activate the DIMP switch (this
         may not be useful).
o For more information, see Note 1368876.
I hope, it helps.
Best regards,
Roland

Assertion failed during save of slideshow settings

Hi,
Great to be able to try out the new Lightroom version!
Here are two things I'm noticing:
There seem to be several issues with slideshow. When I try to change slideshow settings, "impromptu slideshow" stops working in all modes. Also, on occasion, when I try to save slideshow parameters (in the slideshow module), I get the following error message: "Unexpected error performing command: assertion failed!".
What I did was turning almost everything off in the slideshow, no border, cast shadow, guides, no borders, identity plate, rating stars, text overlays, color wash, intro/ending screens, then tried to save that.
The other issue is that it's significantly slower than my current Lightroom 2 version, as many people have already pointed out.
Am using a 4-core Vista 64 machine.

Hi Victoria,
Thanks very much for your quick reply and for looking into this. Here is a sequence that reliably reproduces it for me, after some trials, hopefully this is helpful:
Go to Library module, exit Lightroom 4
Start Lightroom 4 again (starts in Library module).
Switch to Slide show module
Make some changes to settings in the right panel (e. g. disable "Stroke Border") and save changes (Slideshow->Save Slideshow settings). Note: When I first did that, I unchecked all the boxes, except for "Slide Duration" and "Repeat").
Switch back to Library module.
Exit Lightroom and restart it (is in Library module now).
Click on "impromptu slide show" button in the toolbar. The slide show will start, but with different settings from what was saved earlier.
Exit out of slide show with ESC. Switch to Slideshow module.
You can see now that the settings are different from what was saved. Make some changes to settings in the right panel (e. g. ...) and try to save changes (Slideshow->Save Slideshow settings). I get an assertion failure when I do this.
Generally, when I exit Lightroom from the Slideshow module and come back, I see the previously saved settings. However, when I exit Lightroom from the Library module and restart it, I get different slideshow settings from what I last saved.
Also, it seems like "impromptu slideshow" stops working, once I visit the Slideshow module.
Once I saw Lightroom abend when I exited after getting the assertion - but I can't reproduce that. Here is the event that was generated:
Faulting application lightroom.exe, version 4.0.0.1, time stamp 0x4ef2621d, faulting module ntdll.dll, version 6.0.6002.18541, time stamp 0x4ec3e855, exception code 0xc0000374, fault offset 0x00000000000acb17, process id 0x59c, application start time 0x01ccd4c03f0b3450.

Missing projet settings and codecs on Premiere 5.5?

Missing projet settings and codecs on Premiere 5.5
when i open a new project in premiere, the most of the projcet settings/codecs are missing

Hi.
You can easily restore all of your apps, photos and podcasts.
If you activated the iCloud service before updating, your Apps will be storaged "in the cloud" and ready to be re-downloaded. Otherwise, go to App Store and choose "Updates". Here, in the top of the screen, is the "Purchased"-button. Tapping here will give you a complete list of all your downloaded Apps, ready to be re-downloaded.
As for your podcasts, plug your iPhone to your PC/Mac. Single-click your iPhone-device in the menu on the left. Once the iPhone-window appear, go to the tab-menu in the top of the screen and choose 'Podcasts'. From here you can decide which podcasts should be sync with your device.
I hope this was helpful.
Best regards.

How do I save my slideshow settings in Photostream?

How do I save my slideshow settings in Photostream? Invitees tell me none of my settings are available (selected, music, themes, etc.). Thanks!

Thank you. I think it would be nice to lock in settings like iWeb. Oh we'll.

(App) Restore Missing Quick settings

Some of you have noticed that some of the quick settings seemed to have disapeared. Samsung has released an app to restore them - Direct Link - Quick Panel Restore Samsung releases app to fix missing quick settings issue on the Galaxy S6 and S6 edge

Hi Suesbi,
Which password are you being prompted for? The password you created as a backup to the fingerprint unlock? Or the Google password which will be asked if you get the backup password for the fingerprint unlock incorrect too many times.
If you are unaware of either password then you won't be able to unlock the phone. These are security measures put in place by Google. If you have forgotten your Google account password then you'll need to completely reset the phone which means you'll lose everything off the handset.
f this is the case I'd suggest connecting your phone to a computer and transferring everything off you want to keep and then go ahead with a hard reset via the phone buttons.
-Matt W

I'm unable to change slideshow settings for flagged folder, when i hit play the computer locks up and i have to crash it

I'm unable to change slideshow settings for flagged folder, when I hit play the computer locks yp and I jave to crash it to reboot

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it does not then the problem lies with your original library.
If that's the case try the following on your original library:
If you have the space available on your hard drive and don't aready have a backup copy of the library make a temporary, backup copy (select the library and type Commadn+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Just bought iPad mini 2 last week and FaceTime is missing under settings. Even under restrictions , facetime can't be found. I already reset everything but it's still the same, no facetime. Pls help me

Just bought iPad mini 2 last week. FaceTime is missing under settings. i can't even find it under restrictions. I have reset it but it's still the same, no facetime. Pls help me...

FaceTime is not available on devices purchased or used in certain countries, including Saudi Arabia and the United Arab Emirates. This is by government decree. The FaceTime app can't be downloaded or installed on these iPads.
 Cheers, Tom

Retrieving Missing Sync Settings When Upgrading From an Older Version of Firefox to the latest version.

I initially set up my Sync account using an add-on for an older version of Firefox and have since upgraded to the latest version. But now my browser acts as if I don't have a sync account set up at all. When I attempt to create a new account, it says that my email address is already being used which tells me that my sync information is still on the the servers. So how do I retrieve my sync settings when settings are missing within my browser?

I resolved the problem in Snow Leopard by logging out of my (admin) account and logging into my daughter's account on the same machine. She doesn't have admin privileges, so when I tried to install Firefox 4 in her account, I had to authenticate with my admin identity and PW. Installation went smoothly after that. My guess is that you could also simply create a new account on the same machine and install Firefox 4 from that. I have no idea why this works.

Missing Slideshow Settings

Similar Messages

Maybe you are looking for