Missing some values for Navigation attr

Hi All,
1.     We are using a Navigational attr for an MD Info object
2.     This Nav attr is used in Cube(Checked box - as Nav @ cube level)
3.     Problem is : I am able to see all Navigation attr values data , but randomly missing some values for this Nav attr.
u2022     What is the reason?
u2022     Please advise step wise..Any seetings I missed?
Thanks ,
LN

Cube neednot display all values of your navigational attributes.It displays only value for which it recieved the main infoobject.
eg :assume 0MATERIAL and nav attr say A.
Then only values for 0MATERIAL which is present in the cube the nav attribute will be displayed.
Hope this helps.

Similar Messages

Error: Missing initial value for session parameter

Hi,
I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR: Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
Please anyone give me an idea what is causing the problem.
Thanks,

in DAC > Run History > Task Details, query
Name = SDE_ORA_Product_Category_Temporary
Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
-lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

Missing substitution value for variable [dispatcher.host]

Hello,
I'm getting the error message "com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [dispatcher.host]." if I'm trying to deploy an SCA file via SDM (remotegui.bat).
It seems that the problem is a missing variable setting. But I couldn't find any hints at the available SAP web sources which values needs to be set.
It would be really great if somebody could give me a hint which steps I need to do to solve this issue.
Many thanks in advance,
Steffen Zimmermann
Here is the whole GUI log :
==========================================================================
08/11/26 21:31:15 - ***********************************************************
08/11/26 21:31:35 - Start updating EAR file...
08/11/26 21:31:35 - start-up mode is lazy
08/11/26 21:32:45 - com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [dispatcher.host].
                          at com.sap.engine.deploy.manager.DeployManagerImpl.makeTempEar(DeployManagerImpl.java:3747)
                          at com.sap.engine.deploy.manager.DeployManagerImpl.makeNewEar1(DeployManagerImpl.java:3715)
                          at com.sap.engine.deploy.manager.DeployManagerImpl.deployUpdateAction(DeployManagerImpl.java:529)
                          at com.sap.engine.deploy.manager.DeployManagerImpl.deploy(DeployManagerImpl.java:513)
                          at com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performDeployment(EngineApplOnlineDeployerImpl.java:186)
                          at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
                          at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
                          at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
                          at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
                          at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48)
                          at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
                          at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
                          at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
                          at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
                          at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
                          at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11)
                          at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264)
                          at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108)
                          at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.process(GuiAdminRoleCmdProcessor.java:72)
                          at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
                          at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
                          at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286)
                          at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
                          at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
                          at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
                          at java.lang.Thread.run(Thread.java:534)
08/11/26 21:32:45 - ***********************************************************
Nov 26, 2008 9:32:45 PM Info: End of log messages of the target system.
Nov 26, 2008 9:32:45 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Nov 26, 2008 9:32:45 PM Error: Aborted: development component 'Cognos8BI'/'cognos.com'/'Cog8BIFactory'/'1'/'1', grouped by software component 'Cognos8BI'/'cognos.com'/'Cog8BIFactory'/'1000.8.4.1.0.20081125093532''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [dispatcher.host].
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Nov 26, 2008 9:32:45 PM Info: Starting to save the repository
Nov 26, 2008 9:32:49 PM Info: Finished saving the repository
Nov 26, 2008 9:32:51 PM Info: Starting: Initial deployment: Selected software component 'Cognos8BI'/'cognos.com'/'Cog8BIFactory'/'1000.8.4.1.0.20081125093532''/'0' will be deployed.
Nov 26, 2008 9:32:51 PM Error: Aborted: software component 'Cognos8BI'/'cognos.com'/'Cog8BIFactory'/'1000.8.4.1.0.20081125093532''/'0':
Failed deployment of SDAs:
development component 'Cognos8BI'/'cognos.com'/'Cog8BIFactory'/'1'/'1' : aborted
Please, look at error logs above for more information!
Nov 26, 2008 9:32:51 PM Info: Starting to save the repository
Nov 26, 2008 9:32:52 PM Info: Finished saving the repository
Nov 26, 2008 9:32:53 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.

Thank you.
Yes, it was a really not a default variable.
Replacement of the variables directly at the archive with the correct value did solve the issue.

Translated wire message missing some values

Hi,
I am enqueuing an EDIFACT xml to B2B out queue (IP_OUT_QUEUE) which is getting converted to wire message and delivered correctly. But the translated wire message is missing some values:
UNH segment of EDIFACT xml:
<Segment-UNH>
<Element-0062>1</Element-0062>
<Composite-S009>
<Element-0065>ORDERS</Element-0065>
<Element-0052>D</Element-0052>
<Element-0054>07B</Element-0054>
<Element-0051>UN</Element-0051>
</Composite-S009>
</Segment-UNH>
Starting part of wire message:
UNA:+.? 'UNB+UNOB:1+ + +100407:2354+1003'UNG+ORDERS+ + +100407:2354+1003+UN+D:07B'UNH+1+ORDERS'BGM+105:::?' ?'+GSIAP.WORLD?:oracle.apps.po.event.xm::?'
In wire message, 'UNH+1+ORDERS' - this portion is not having values of Element-0052, Element-0054 and Element-0051. Why are this values ('D','07B','UN') missing in the translated wire message?
How can I make them appear in wire message?
Appreciate your help.
Thanks in Advance,
Siddhesh

Hi Siddhesh,
Check your ecs file. Possibly you have not defined these params in ecs file.
Enable the validation then you will come to know exact issue.
Rgds,
Nitesh Jain

Missing some value of Message Notification from WorkCenter

Hi Expert,
I have scenario when user create message notification from workcenter, it will be send mail automatically to the user (mail account) in status new and I have successfully create it.
And the issue is =
When i preview the message from the transaction (from menu action), it will display the whole message.
But when user received the message via mail account, some value from the message is miss (not whole message will be appear)
Could anyone help me how to solve this issue?
Regards,
Rhesa Syahrial

I just used to have stalonetray running at the bottom of my screen. I made its height small enough to fit along with my conky 16px I think it was. Doesn't take up too much space.
Since I switched to i3, I find its better to just not use trays as I can simply assign a whole workspace for skype and so I don't need any tray.

Cluster trees: suppressing counts for docs without value for metadata attr?

Hi,
Using metadata cluster trees on 11g in the SES standard UI, has anyone tried to either not show rows without the metadata value or to change the standard value "Miscellaneous" to something else? If so, could you provide some details on how you did this?
An quick example of what I would like to accomplish. Let us say I have 100 documents in my result set, and 30 of them are without a value for "Author". If I create a cluster tree on metadata attribute Author, I would like to configure whether or not the 30 documents without author shown in the Author cluster tree. Secondly, I don't like the term "Miscellaneous", so I would like to change the value to "Missing value" or something like that if I decide to show the docs without value in the cluster tree.
regards,
Rune

Hi,
Using metadata cluster trees on 11g in the SES standard UI, has anyone tried to either not show rows without the metadata value or to change the standard value "Miscellaneous" to something else? If so, could you provide some details on how you did this?
An quick example of what I would like to accomplish. Let us say I have 100 documents in my result set, and 30 of them are without a value for "Author". If I create a cluster tree on metadata attribute Author, I would like to configure whether or not the 30 documents without author shown in the Author cluster tree. Secondly, I don't like the term "Miscellaneous", so I would like to change the value to "Missing value" or something like that if I decide to show the docs without value in the cluster tree.
regards,
Rune

# values for navigational attributes in report . (Urgent)

Hi Gurus,
I have a navigational attributes for time dependent master data. In the report I am not able to see values for that navigational attribute. I see # values for the navigational attributes. I checked the master data of main info-object. every thing looks fine.
please help me in regarding this.
thanks,
Regards,
Aarthi

Check the following two things again just to make sure you are doing everything right. These are already mentioned by Bhanu...
1) Go to the master data table (Q table or the M table) and check to see if there are M version records (OBJVERS = M). If yes, you need to activate the master data using the program RSDDS_AGGREGATES_MAINTAIN (Change Run). If there are no M version records then check the second step
2) If you do not enter any key date in the query, it takes the system date as the default key date. So check and see if any master data exists for today's date ?
Also just curious, which version and support pack level are you on ?

Sales Order - Missing some values at Header

Hi all,
I have a sales order with item category TAQ. Two items go to one plant, and one item go to another plant. All pricing exist at line item level. However at header level, the net value only include net value of the one items in one plant. Net value of the sale order is missing the two items.
I don't understand how this happen. There are pricing calculations for all 3 items at the line level.
Would anyone have any suggestions ?
thanks
joyce

HI,
When you say pricing will be calculated at header level, do you mean at the finished goods level in sales order ?
thanks
Joyce
If you are working on BOM scenario, then for TAQ the pricing will be calculated at header level only for Higher level item. for other items, item category must be different.

Only posted values for Navigation does not work

Hi,
I have a problem where all master data is shown in the input help for a variable, even when the setting for the info object is to show only posted values.
In a WEB template I have tree reports using tree different data providers. The setting in the web template is to show the same variable only once and that works. The setting of the info objects is to show only posted values. That does not work!
When using the input help for a variable, all master data shows, not only the poster values in the data providers.
When unchecking the setting Display Same Variable Only Once (MELT_VARBLES) the variables appears tree times each and the input help works as expected. It shows only posted values.
Any experience of this?
Best Regards
Kent

Hi Kent,
If you build several queries on different infoproviders, then put them into one web template or workbook. Variables from different queries with the same technical name will get merged in variable screen (Set parameter MERGE_VARIABLES=True in web template property. Set "Display Duplicated Variables Only Once" in workbook settings for variables).
This means, that it is not possible to decide which infoprovider the variable is based on. The provider is unknown to the system when doing F4 help so that D mode is not possible since D mode [Only Values in InfoProvider] is also infoprovider dependent. So only M mode ['Values in Master Data Table'] is possible.
In such merge variable situation, the authorizated values in F4 help is also retrieved without specific infoprovider.
Regards,
Nishant

Inbound IDOC missing some values

Hi ,
We got few fields in the IDOC which are populated at the sender side of the IDOC but when it comes to XI we dont see those fields populated in the payload at the sender. Any idea on what could be wrong. I have checked the mapping in XI and the sender has the 2 fields in the IDOC. Trying to figure out where it went wrong.

@ Srinivas - If there is problem with metadata, there will error message here is not the case.
actually if there is a field generated on the IDOC it has to come to XI in the source payload.
check this.
Idoc Payload incorrect
Edited by: Venkat Anusuri on May 18, 2009 4:46 PM

F4 Input values for variables based on Navigation Attributes

Hi,
We would like to use the option "Q Only Posted values for navigation" from the set F4 mode 'Query Execution Filter Val. Selectn' in the Multiprovider specific properties.
The problem is that this option Works for Infoobject stored on the infocube, but It doesn't work for Navigation Attributes.
Question : Could you please tell us how to use the option "Q Only Posted values for navigation" with _Navigation Attributes _ ?
Thx.
Radj.
Edited by: Radjech Radjech on Nov 24, 2011 2:22 PM

Hi,
The input help only offers values for which you can select data in the current navigational state
Check the below link ,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ecb78c-374a-2d10-c6af-f024f19b785d?QuickLink=index&overridelayout=true
Only posted values for navigation - what does it mean?
Regards,
Satya

Change Account Workflow in CUP - Doesn't pick up existing values for an Acc

Hi,
When using the change account option available in the CUP(5.3 SP 7), I expected the system to populate the user details as they exist in the provisioning system once I enter the account details that need a change. We have the 'Search' and 'User Details' Data source configured to the same SAP R/3 system.
For eg, when requesting for a new account, I've chosen an Employee Type attribute as 'Non-Employee' (SAP delivered request attribute) and entered some values for my custom attributes .
And when I chose to change the same user account, I notice that the system doesn't pick up the existing values for any of the attributes and render them. For the Employee Type attribute, it shows the default value and for the custom fields, they are shown blank!!!!
It does seem like the user attribute values from R/3 are being picked up and displayed correctly, but the ones from GRC Database are left out.
I believe this to be a bug and does anyone experienced this issue and found a fix????
Thanks,
Anil

Hi Alpesh,
Thanks for your response.
This brings up a basic question on the repository for saving user attribs...ie. does all these need to be saved on R/3? Assuming yes depending on our current configuration(We have the 'Search' and 'User Details' Data source configured to the same SAP R/3 system), do we have a standard field for saving the 'Employee Type' attrib in SAP?. I did perform a field mapping of a custom attirb to one of the SAP fields in the user master, and get it saved during user provisioning. But it doesn't pick it up from there when I perform a change account. Seems it's missing that reverse mapping. And I've chosen the 'Field Type' of the custom filed to Text as to enable free text during new account request.
Hope you may find something more.
Regards,
Anil

Urgent -Need to Add new values for the LOV field in forms

HI,
I am customizing an existing form. In that i need to add some values for the LOV fied which can be used during run time.
Please Can some one help me in doing this?
Thanks
Suresh P

Go to Navigator and edit the LOV or create a new one.
hope that helps!

* Values for Billing QTY in a Report

Dear SDN,
I am getting some values for Billing Qty as star (*)...in a Credit memos Report (SD)..
I am using 0SD_C03 InfoCube..
I have checked in the PSA also.. Data is available... Some value should come...but * is coming
Help will be greatly appreciated with points..
Thanks in advance...

Thanks...
But after doing the same way .. i am not getting any Units...
Not getting * but values are ok...But without any units
But Now client may ask to me..How to identify which are expressed in NO and TO and KG...
Please help me out to resolve it
Indeed, Thanks a lot for your help...

Drop down values for table in a view not getting populated dynamically

Hi Experts,
The problem which i am facing is as follows
In an existing web dynpro component , i already have a view and it consists of table which has 3 columns.All the three columns are non editable
MATERIAL     MAT_DESC     MAT_DEL_FLAG
ABC
EFG
HIJ
Now i need to add 2 more columns after the MAT_DEL_FLAG.These two PLANt and STORAGE LOCATION columns must have drop down values
The context refers to a standard Database ZTABLE to which these two fields are added.
MATERIAL     MAT_DESC     MAT_DEL_FLAG     PLANT     STORAGE_LOCATION
ABC
EFG
HIJ
The Plant column must have the drop down values based on Material .
If we select some value for Plant , then based on the value of plant the storage location drop down values must be populated.
So as per this logic , the drop down values for plant for each row must be different.
Please let me know how to achieve this.
This is a normal table and not an ALV table.
Also please let me know whether the drop down field must be drop down by key or drop down by index.
This is very urgent.
Thanks in advance
Sindhu

Refreshing things again for you -
1. As I have already pointed, create 2 context attributes for VALUESETS for both plant and St.loc.
2. Create dropdown by indexes for both of them, assign valusets to respective attributes using node information.
3. Go to the plant dropdown and create the action for it ONSELECT event - when you chagne the dropdown of plant then populate the respective storage loc.
4.Now, As you are selecting a row (leadselect) you have populated the plant and loc details....write the code for lead selection event of the table
You will get the lead selection index right using node interface (IF_WD_CONTEXT_NODE)
LOOP AT ITAB INTO WA_ITAB.
if sy-tabix eq lv_lead_index.
clear wa_valuset.
wa_valueset-key = 'X'.   "plant
wa_valueset-value = 'X'.
append wa_valueset to it_valueset1.
* popultae the storage location valuset based on the plant selected (bydefault it is 1 right in dropdown)
clear wa_valuset.
wa_valueset-key = 'XX'.   "storage loc
wa_valueset-value = 'XY'.
append wa_valueset to it_valueset2.
else.
* Fill the valusets for all other rows as different or as per your requirement.
endif.
wa_itab-valuset1 = lt_valueset1.
wa_itab-valuset2 = lt_valueset2.
modify itab from wa_itab transporting valuset1 valuset2.
clear wa_itab.
ENDLOOP.
lo_node->bind_table ( it_tab).
Now for that Row, if a plant value is changed, respective storgae loc has to be filled right...then in that ONSELECT of plnat drodpwon again you need to write a piece of code...using the same code with a little modifications.
Hope this is clear.
Check this article on the same - but here ALV is used...the concept is same use it for your table -
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0cbdde3-fe58-2c10-fcbc-8db18e693877?QuickLink=index&overridelayout=true
the above code you hvae pasted - i think it fills only for the 1st time....
Regards,
Lekha.
Edited by: Lekha on Dec 20, 2011 12:00 PM

Missing some values for Navigation attr

Similar Messages

Maybe you are looking for