Missing sound at the begining of chapter

I built a blu-ray disk with the following flowsheet (this flowsheet is OK according the "check project" feature) :
After the disk burning (with Nero 12 Burning Rom, not with Encore CS 6 which generates a well known error not fixed by Adobe), the "read first" before main menu is an AME transcoded sequence from PP CC. This sequence has an audio track, but only with the final burned blu-ray disk, the sound begins after about four or five seconds, not at the begining.
I checked the "montage" in Encore and the related .m2ts file in the BDMV directory : both are OK.
Is this a bug or if not where is the mistake ?

Hi,
Many thanks, I shall try and inform you.
I hace noticed that the sound start suddendly like it was blocked then
suddenly released.
Le 30/03/2014 18:53, John T Smith a écrit :
>
Re: Missing sound at the begining of chapter
created by John T Smith <http://forums.adobe.com/people/JohnTSmith>
in /Encore/ - View the full discussion
<http://forums.adobe.com/message/6255021#6255021

Similar Messages

Clicking/popping sound at the beginning of tracks when going to next track

some of my songs have clicking/popping sound at the beginning of the track only when I hit the next track button
if I let the track end the pop/click won't happen
any idea what this is?

Re-import one of the of the problem CDs in a lossless format, such as AIFF or Apple Lossless. Play a little to verify that the tracks are good. Then use iTunes to convert them to AAC.
Verify that those new tracks are good, and if so, you can then discard the lossless versions and keep the AACs.

No Sound at the beginning after rendering (Adobe Media Encorder)

At the beginning like 30 sec. there is always no sound whats the problem?

oh i forgot to say that i have windows xp and my browser is
firefox.

Why's this sound at the beginning of my recording?

After I send a song to iTunes, there's always a faint drum/synth sound heard later in the song that shows up at the very beginning of the track when it's not supposed to be there. Why is this? Is it because I haven't selected the loop and set the duration?

rsherid wrote:
After I send a song to iTunes, there's always a faint drum/synth sound heard later in the song that shows up at the very beginning of the track when it's not supposed to be there. Why is this? Is it because I haven't selected the loop and set the duration?
This may be a manifestation of a lingering bug in the audio engine that caches a reverb tail from the last play. If it's what I'm thinking of, a workaround would be to select all the tracks of your song, and move them all forward, in sync, about a measure or two. Looking at your tracks, it will appear as if the beginning of the song is now at measure 2 or 3 instead of 1. That way, there will be a moment of silence at the very beginning of the song (that clears out the cache), but then everything will start normally and play to the end, and it will get rid of the ghost echo at the beginning.

Stuttering Sound at the Beginning of Each Imported Track

I'm using the internal DVD drive on my PowerBook G4 to import songs from CD to my iTunes library (located on my internal hard disk). Often times, the tracks I import will have a half-second stutter at the beginning when I play them back. I'm importing in AAC format at a high bit rate (320 kbps). I've tried this at lower bit rates with no luck. I've also tried using error correction, but that doesn't seem to make a difference.
What's interesting is that this doesn't happen *every time* I import a CD. For example, I recently bought the Beatles stereo remasters and imported four of the disks the other day. No skips, no problems. The next day, I imported four more disks, and *all four* disks had skips on just about every track (except the first track—the first track is always OK).
I thought it might be that I was running too many applications at once, and maybe that's what was interfering with the import process. Restarted the machine and opened up iTunes only—nothing else—but the stuttering problem persisted.
(For the record, I don't think it's a problem with the disks either. I have no problem importing tracks using my iMac.)
Any idea what's causing this or, more importantly, how to stop it from happening?
- Keith

Re-import one of the of the problem CDs in a lossless format, such as AIFF or Apple Lossless. Play a little to verify that the tracks are good. Then use iTunes to convert them to AAC.
Verify that those new tracks are good, and if so, you can then discard the lossless versions and keep the AACs.

Thinkstation E31 won't boot up, no display, two beep sounds in the beginning

Hello,
I just got my thinkstation E31 SFF today and pretty excited about it.
However, when i pressed the power button, it sounded like everything is turned on (fan sound, etc) then there are two beeps and no display on the monitor.
What is wrong? Can anyone help, please?

without knowing your monitor model, what connections it supports, and if it's set to use the VGA signal as default, this is difficult to debug. i'd suggest calling support at 800-426-7378 and they can help walk you through everything.
eventually you'll want to change the BIOS display output option to use discreet graphics, then connect your monitor to the Q600. this can be done by openening the BIOS setup by pressing the F1 key at boot. the settings can be found in the HMM: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_pdf/e31_hmm.pdf setup instructions start on page 55.

My Hp Pavilion Sleekbook 14 14-b015TX Plays no sound in the first 30 seconds of any audio

Hi!..
Please help me with my sleekbook. The problem with this is that no music or souds will be played in its first 30 seconds of the music or even video. I already ask the hp store technician but when they tried it, it played the music or sound in the beginning of each music or video. But when I am in home or at school I always experience this kind of problem. My sleekbook is brandnew, I purchase it last month. What should I do with this? Please help me T_T . Thanks

Hello jarvin,
Thank you for the reply. I believe you should call in and speak to a rep.
Toll Free: 1-800-1441-0094
+63 (2) 867-3551
Monday-Friday
08:30 AM – 05:30 PM
That is the number you would call. Please let me know what happens.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

What is the best way to loop a sound where the loop is a subsection

I have a sound file, and I am supposed to loop a middle section of the sound, i don't see any way in soundengine to do this. What is the easiest way to loop an MP3 background sound where the beginning is to played once. if I load two sounds and then play both of them they will overlap, yes? I know the time of the loop point, but wonder if there is a way to make it a really perfect loop, with no pauses, gaps or clicks.

I'm not at my Mac right now so I can't give specifics but SoundEngine allows you to specify attack and decay components to a looping background track. In your case you would specify the beginning section as the attack component and the middle (looping) section as the primary component.
Craig

KNOCKING SOUND AT THE STARTING OF PRINTING FROM ALL IN ONE F2418

I AM USING ALL IN ONE F2418 FOR LAST 1 AND HALF YEARS. IT WORKS FINE. BUT SUDDENLY THERE IS A KNOCKING SOUND AT THE BEGINNING OF PRINTING JOB EVERY TIME. I OPEN THE BACK PAPER JAM REMOVAL WINDOW AND SEE THAT THE WHITE GEARS AT THE ROLLER SIDE TRIES TO RUN IN OPPOSITE DIRECTION AND THE SLIP OVER EACH ANOTHER AND MAKING SOUND. THE PRINTER DIAGNOSTICS SAYS EVERYTHING IS OK. WHAT IS THE PROBLEM AND HOW COULD I SOLVE THE PROBLEM.

Hi roamer2007,
Follow the steps in the document below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01414872&tmp_task=useCategory&cc=us&dlc=en&lang...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How can I make the Acrobat Pro MP3 player rewind to the beginning of the sound track.

The small rewind button on the Acrobat Pro MP3 player does not fully rewind the audio, it only jumps back a small amount each time the rewind button pressed. Is there a way to make the rewind jump back to the beginning of the sound track?
If that is not possible, is there a way to use a different skin for the MP3 player--one that would provide better controls?

Thanks Dave,
I thought this was the case, but hoped there was something I was missing.

Style a pic as the beginning of a chapter? Epub

Hello,
I am using Pages to export to Epub. I understand how to style text to be the beginning of a new chapter, but I have not found a way to "style" a picture as the beginning of a new chapter. Any advice?
I have access to both pages 4 and pages 5 if either can do the trick.

Hi narin1975,
Welcome to Apple Support Communities.
It sounds like you want to add a page in your iBooks Author project. Take a look at the iBooks Author Help webpage below, it will walk you through adding or deleting pages, chapters and sections.
Add, reorder, or delete chapters, sections, and pages
http://help.apple.com/ibooksauthor/mac/#blsa47d9392
Add a new page
In the Book pane (shown above), select the chapter or section you want to add pages to.
Click Add Pages in the toolbar, and choose Pages > Option.
Tip: You can also add a new page by Control-clicking a page in the Book pane and choosing Insert Page from the shortcut menu. The new page uses the default layout for the chapter or section.
I hope this helps.
-Jason

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1 now my problem is that all my past work which i did on older version on GB, has missing sounds in it.

I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1
now my problem is that all my past work which i did on older version on GB, has missing sounds in it. so here are my questions
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
thanks

3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
See: This document explains what the in-App purchase is about.
Expanding GarageBand for Mac (v10.0) content with an in-app purchase
Do you still have your old Mac?
How did you migrate from the old Mac to the new Mac? Did you transfer your old software and documents using Setup Assistant? Then your old GarageBand '11 version should have been migrated, and all your instruments.
if you did not migrate GarageBand '11, copy your old Instruments Library and Loop Library over from the old mac. Copy the following folders to a thumbsdrive and merge the missing dontents into the corresponding folders on your new mac: (from the system library - the top level library folder on your Macintosh HD):
/Library/Application Support/GarageBand/
/Library/Audio/Apple Loops/
And if you would like to continue to use GarageBand '11 for access to missing features, copy also /Applications/GarageBand over, but to a subfolder of Applications. I recommend, to install the old GarageBand as well. It can be used in parallel to GB 10.0, and will come in handy, if your old projects are having problems.
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
The JamPacks are nice to have, a terrific collection of instruments and loops, but if you did not have them previously, that will not help with your missing instruments. You can instll them by buying Mainstage 3. They work well with GarageBand 10.0
-- Léonie

My iBook has a blank page at the beginning of each chapter. How do I delete?

I have a blank page offset to the left at the beginning of each chapter. How do I delete them?

The first selectable template is "Basic"... the template - and any others have placeholder text and images excepting pages "Default" and Blank. The "Default" page accepts flowing text. "Blank" is just that with only any BG image and page numbering decided in the template.
Nothing you describe seems to be part of just opening a standard template.
Below are screen shots from the book tree and the layouts - these are the "Basic" template pages without any modifications.
Any of the pages shown in the tree can be deleted. Chapter and Sections will also delete any pages added under them.

TOC at the beginning of every chapter

Hi,
I am working on a publication.
I included a TOC at the beginning of the document:
Chapter one
part one
part two
Chapter two
part one
part two
Chapter three ...
So far, so good, but I also want to include the same TOC at the beginning of each chapter,
this time only containing the part of the TOC that is relevant to that chapter:
for example: Chapter two should start witch a TOC, containing:
2. Chapter two
part one
part two
But it shouldn't contain any of the information about chapter 1 or 3.
Can this be done?
At the moment, my publication is just 1 long InDesign document, not an InDesign book or something...
I accomplish what I want by creating a TOC, and manually delete (for each chapter) the parts that aren't relevant to a specific chapter....
Any help would be appreciated...

I would create the TOC as a threaded story.
The first text frame(s) before the first chapter, second before the second, etc.
All that you would need to do then would be resize each text frame(s) to fit the correct part of the TOC for that chapter...
Harbs

Missing sound at the begining of chapter

Similar Messages

Maybe you are looking for