Missing sound between video clips

I have been using PE10 for some while now. One thing that I have noticed is that when you put together clips there is a silent gap on the soundtrack which lasts about 3-4 frames. I use MTS files. When you add another clip to an existing one- if you go through the transition from one clip to the next frame by frame there is a short gap of 3/4 frames with no sound but still the picture. Currently I cut the next clip after I gone though it frame by frame until the first frame when the sound reappears. I them delete that small section and when the remaining clip automatically shifts and joins the previous clip I get an unbroken sound and picture transition. But I am curious as to why PE should introduce this silent gap in the first place. Any ideas?
cheers
bill

Thanks for the link. Is the solution to try using that tsMuxeR program or is there a better way of importing the clips into PE? Once I download the files/folders off the SD card from the camera I format the card ready for new recordings. So the only copies are on the main HD and backup external HD.
When I use PE I use its "Get video from files and folders" option to find the files which are located in the Stream folder.

Similar Messages

Black between video clips

I'm trying to insert black between video clips and can't seem to find the option to do so. I've tried inserting a text in black with a black background, but it just outlines it. I tried inserting a 10 sec 'fade to black' transition, but you can't insert anything into that 10 seconds. The only thing I can think to do is to film in a dark room or with the lens covered and to import that.... does anybody know what I can do? Please help!!
thanks~

Open the transitions menu (the square icon with 2 triangles to the right of the "T" (type) icon. All menu icons are located just below the right corner of your movie window. The music symbol, camera symbol, etc...
Choose the Fade to Black and drag it between the clips where desired effect should be. You can even double-click the transition once its placed into position and adjust the amount of fade time.
Hope this helps

Toggling between video clips (not audio clips) in the timeline

Hi,
I was wondering if there is a solution to this small inconvenience I am experiencing in FCP 5. When I have snapping enabled, and press the down arrow key, the playhead jumps to the next audio or video clip in the timeline. I am trying to find out if there is a way to jump between video clips only.
Thank you
-Peter

Thanks,
Do you know if there is a way to make the up/down arrows snap to only the video cuts on the video clips in the highest video tracks in the timeline? Thanks.

Do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

There is no sound on video clips downloaded from my camera phone

There is no sound on video clips downloaded from my cell phone camera. I have sound on all other applications. The clips have sound on my husband's computer which has windows vista.

With help from Costco Concierge, the problem was solved by downloading a sound card from Itunes.

My iphone 4 microphone won't record sound on video clips and doesn't work with Skype

This is the first time I have used the forum. My iphone4 microphone won't record sound on video clips, and won't work with Skype.

I have checked that I have the latest software. I have restarted phone. I am not sure how to perform the other things you mentioned , restore and reset as new... Would I lose any data by doing these? Thanks for the reply.

How can I match sound quality between video clips and audio clips?

Hi guys,
First of all let me say that I enjoy using the latest Media Encoder. However, as a novice, I have two related problems.
1.I am recording video to use with PowerPoint slides in Adobe Captivate. I am encoding the video with best quality FLV. This produces very good video,
      but with a degraded audio track, even though I had filtered the audio in soundbooth. The post encoding sounds like it did before Soundbooth corrections.
2. Some of the video recording has been set cut into audio clips to be used as background narration behind PowerPoint. The logic behind this is: that if both are
      recorded at the same time, the voice quality should match.
This is far from the outcome. I have tried MP3 for the audio which of course produced the best sound- but is entirely unlike the rest of the video. I have also encoded the audio with Windows Waveform preset figuring that since the soundbooth edit was a .wav file, that there should be a reasonable match. Wrong again!
So, the audio quality of all clips is poor, and the difference between the encoded video clips, and the audio encoded clips spoils the otherwise professional result in Captivate.
Please help, all of you experts.

Thank you.
OS Windows 7 x 64; 3.2 MHz; 2 TB; 12 GB Ram-9GB ram allocated to Adobe.
My process is this:
1. The whole video and audio narration material is shot in one continuous video sesseion.
2. The microphone is only mono, but the camera is set to stereo. Noone can work out how to change the camera to mono.
3. In Premiere Pro 5, I select render and replace in SoundBooth.
4. In Soundbooth, I choose Add Multichannels.
5. In Multichannels, I delete the unwanted noisy channel, and any other unused channels.
6. With the remaining mono channel, I then select Export and Save As option, then Stereo.
7. Next I edit the stereo channels as needed.
8. The imported stereo won't automatically update in Premiere Pro, so in PPR I import the new edited stereo track.
9. I test this track in PPR, to check that it is playing R & L channels. It is. OK.
10 On the timeline, I proceed to cut apart this single stereo wavelength .
11.These clips are saved as Video, or Audio subclips.
12 From the video subclips, I export to Media Encoder, and choose either FLV4 match attributes (High Q). This I modify to custom 2 pass (Custom save).
     The summary says that this is saved to MP3 Stereo.
13. I import this into Captivate 5, but the Video outcome is Left channel only. I have tested this on Media Player/Real Player where it is also L channel only.
14. I export my Audio subclips to Media player, and select MP3 option and this summary also reports stereo. The Audio outcome is stereo, when played in any player and in Captivate 5.
I cannot understand how a single, continuous track edited uniformly in Soundbooth to stereo, can produce different outcomes in Media player.
I would so appreciate a solution to this problem, because, in the Captivate 5 e-learning production, the switch between stereo audio (behind PowerPoints), and l. channel video is distracting. Naturally, the l. channel only is a thin sound. It is as if it had never been edited in SoundBooth at all.

Transition stuck in Photo Album theme between video clips

I'm working with iMovie 11 and it's the second time this is happening to me. I made a movie using the Photo Album theme that combines video from my iphone and photos. I have a 27 minute movie and I'm pretty much done except that I haven't added music yet. Now I noticed I get stuck again between transitions from one video to another.
It's a theme transition that's 3.4 s with one clip of 17 s and the other of 7 s. I've tried to go back as far as I could to see if I can get to the point where it wasn't stuck but I can't.
After trying all kinds of things last time I gave up after hours of frustration and started building the exact same thing from scratch and then it was fine. I really don't want to keep doing this as I've put in lots of time again in this project. I've just tried to change themes, adjust the length of the transition but with no luck.
One reason I switched to a Mac was movie editing but right now I'm not a very happy camper...
Can anybody help me before I pull my hair out???

One more thing I just noticed. I saw that it happens at a bunch of transitions. Some of the video clips have a small yellow 24, 25 or 27 in a grey box on the lower left corner of the clip. I think that's the frame rate. I just thought it happens when it switches between clips with different frame rates but that's not always true either... Can't find a consistent reason. Sometimes it happens between a pictures and a video clip too.

IMovie 09 - synching new sound to video clip

Hi all iMovie users. I am trying to synch my improved sound track to video. I drag the new sound track to the approx right place in the iMovie clips having muted the clip but if I drag the green sound bar it is too fierce; if I use the arrow keys to correct "too early/too late" nothing seems to happen. I have been trying for quite a few hours. Any suggestions please very gratefully received

I would recommend the following:
1) Set the thumbnail slider in the Project window to 1/2 second. This will enable you to slide the green bar left or right frame by frame.
2) Open the video clip and (temporarily) set the volume to 100%.
3) Click the button to show the audio waveforms. You should see the waveforms for the new audio track as well as the video so you have some visual cues to line them up exactly. Look for a peak or a gap in the audio. This makes it easier to line up (like the old hollywood clappers).
4) Drag the frame back and forth using the audio cues and the visual cues. When you have it lined up exactly, set the volume of the original video track to zero. Set the thumbnail slider back to where you usually keep it.
One more thing: If you cannot drag frame by frame, go to iMovie/Preferences and put a check mark next to Display Time as hh:mm:ss:frames.
Message was edited by: AppleMan1958

No sound on video clips on 6230i

Hi Folks,
Can anyone help with the following:
I have some video clips which I have converted to .3gp using the nokia player, and they then play OK on my PC, but when I transfer them to my phone, only the video plays, no sound at all.
I have one clip on my phone which does play sound and video but it was converted using a different application some time ago which unfortunately I no longer have.
So there is no problem with sound on my phone, it just seems not to play the sound on new video clips.
Any ideas most welcome.
Regards.
P.S. I have a 6230i and I'm using Data Suite version: 6.84.10.3

08-Nov-200704:35 PM
ford_prefect wrote:
Hi Scooby,
Thanks for the suggestion but where exactly is the download link for "Super".
Your link goes to a description page, then that links to a download page which links back to the description!
Regards.
How to download Super from Erightsoft?
http://blog.gilluminate.com/2007/1/27/how-to-download-super-from-erightsoft
this will help...

I am having trouble getting sound on video clips I have imported into Premiere Elements 10.

I am having trouble getting sound when importing video clips into Premiere Elements 10. Is someone able to offer me a solution as I have no idea what I have done to cause this to happen.
The clip has sound when opened with windows media player.
Thank you

Hi Steve,
After reading everybody’s responses I am feeling a little out of my depth. Being new to this I am having difficulty in understanding a lot of the information given to me and also in the information you require from me. It appears that one thing I should never do is mix film from two different cameras. I would really like to fix this one particular clip though as it holds an interview that was taken when leaving Coober Pedy and something that I don’t want to lose.
I have today done some research on the camera that took the offending video clip. It was a Samsung S85 and according to the Samsung website it uses MJPEG video format.
Here are the specifications as per the Samsung website.
Camera Type
Ultra-Compact Point-and-shoot Digital Camera
Image Quality
Image Sensor
1/2.5" 8.3 Megapixel CCD
Effective Resolution
8.2 million pixels
Color Depth
24-Bit RGB
Color Modes
Normal, B/W, Sepia, Negative, Red, Green, Blue, Custom Color
Image File Formats
JPEG (Super Fine, Fine, Normal)
Recorded Resolution
8M (3264 x 2448)
7M (3264 x 2176) - 3:2
6M (3264 x 1824) - Wide
5M (2592 x 1944)
3M (2048 x 1536)
1M (1024 x 768)
Video Recording
AVI Motion JPEG with Audio
640 x 480 @ 30 or 15 fps
320 x 240 @ 30 or 15 fps
Clip length limited only by available memory
5x optical zoom available during video record
Audio Recording
WAV format (monaural)
I downloaded and installed Media Info and Morgan Multimedia MJPEG Codec V3.99.108 today. Do I have to register it to get it to operate? I read the documentation file that came with it hoping to find a clue as what I should do but I could not comprehend the information it contained.
Thank you and other members who have responded to my plea for all the help you have given me.
Judy

Seperating sound from video clips?

I was wondering if anyone could give me instructions on how to go about serperating audio from all of my video clips in order for me to delete the audio.
Power Book G4 Mac OS X (10.4.6)

If you untarget the audio tracks in the timeline then the audio will not be placed in the timeline. If you already have all of your clips in the timeline and you do not wish to redo that, then "option-click" on the audio tracks and you can delete just the audio. Or if you have quicktime pro then load your vidoe clips into quicktime and choose export "movie to Quicktime Movie" then deselect the audio tab.

Missing Visuals in video clips (Adobe Premiere Elements 10)

When I load up my video editting program (Adobe Premiere Elements 10) everything appears fine.
It's only when i try to load a video into the program that things go buggy.
The Video Clip appears on the timeline. The Audio works perfectly fine. However, the video, or image for that matter doesn't appear in the "viewing screen" (can't think of the right word
If I add a video effect to the clip (for example, Auto Color) then the picture becomes visible.
But, when I then render the clip, the picture disappears once again.
I'm no expert with computers or programs so i am pretty lost on what's wrong.
The last time I used the program (which was about a week before New Years Eve, 2013) it was working perfectly fine. I've used the program for the past year with little to no problems, so I am baffelled as to why this has happened now.
Any kind of help would be really appreseated
I even still have the original disc I bought when i first installed the program, so if i need to uninstall then reinstall the program it will be eailly done..
Thanks in advanse for you help

CreweOnTheSofa
Along with the Intel Graphics there is something called "NVIDIA GeForce GT 640M"
nothing more then that.
That is probably at the core of your problems, and we need to explore this. My take on this is that you have 2 things going on here.
1. There is an epidematic of display problems targeted specifically at the Premiere Elements 10 user whose computer uses a NIVIDIA video card. (You have Premiere Elements 10 and one of your video cards is NVIDIA GeForce GT 640M.)
Typically the drill is to have the version of the video card driver up to date. In this case, the fix is to roll back the driver version far enough not to have the display problem. Neither NVIDIA nor Adobe has not stepped forward to correct the situation.
Check out the following link to see what you are up against regarding the NVIDIA side of things.
http://forums.adobe.com/thread/1317675
2. On the other side of things, you have an integrated Intel Graphics card as well as the NVIDIA. There can be conflicts when two video cards/graphics cards are involved (independant of the NIVIDIA issue). Typically you see disabling of the integrated card, in your case the Intel Graphics. But, I am not sure where that would lead stability wise.
You could look at both areas and see if you have displays gains for one or the other. I would look at rolling back the NVIDIA first.
Please review, and then we can discuss this further.
Thanks.
ATR

Disable sound on video clip

I'm sure this is a simple question (newbie) but I'm trying to figure out playing an audio track (which is already rendered and in) over the audio which is coming from the video clip. I hear both audios now but I need to get rid of the audio associated to the video clip.
Thanks!!
Message was edited by: ilehne
Message was edited by: ilehne

Hi welcome to the forum,
There are several ways to mute a track, however one way to avoid possible rerender is this:
click the tiny speaker icon right at the lower left corner of the timeline window then click on the small speaker icons that show up at the far left of the timeline. The speakers will display a yellow light and the track you don't wish to hear will be mute.
G.

-FIX FOR NO SOUND ON VIDEO CLIPS PUT ON iPOD-

Hi, I was just playing around, trying to get an .mpg (MPEG-1) file to play on the ipod. I exported it with QT using the 'Export for iPod' option, the video worked, but there was no sound, I know that a lot of people are having this problem. Here is how I got an old MPEG file to work on my iPod video: (PS: You have to have QT Pro, I used 7.0.3 Pro)
1) Take your original file (MPEG-1, MPEG-2, or AVI, etc) and open it in QT and then go file 'Save As', select 'Self Contained Movie' and then hit save. This will make a copy of the movie, but put it .mov format.
2) When it is done, open the .mov file it just created, and using the QT Pro 'copy' feature select the entire movie (Cmd+A) and then copy that (Cmd+C).
3) Open a new QT player (Cmd+N) and then hit Paste (Cmd+V). It should have copied the movie from the .mov file into an UNSAVED New QT Player window.
4) Now, go File>Export... (Or Cmd+E) and then select 'Movie to iPod' in export to dropdown. Name your file and hit save, it will begin exporting the file into a .m4v file. (Which the iPod likes)
5) When it is done, which can take a very long time (It took me at least 5-7hrs to export a clip that was 1hr long)
6) Drag the newly created .m4v file into iTunes, update your iPod, and the iPod should read it and it should have video AND sound together nicely, which has been the big problem.
Try this out maybe copying a very small portion of the movie (back at step 2) to a new player, maybe 10-20sec worth as this will not take very much time to export to the .m4v file and will allow you to put it on your iPod to test it out and see if it will work.
Try it out and I hope it works for you. Post any comments as well. Thanks, Dylan

I have also found a fix for this (MAC only probably). It requires 2 free apps, and it doesn't take horribly long, I think one of the apps does the same exact thing as quicktime pro when you export from there, so it might take a while.
1. Download the app MPEG Streamclip.
2. Download the app MoviesToGo
3. Open your muxed video in MPEG Streamclip
4. Go to File>Export To Quicktime
5. Choose a Quality then Make Movie (this goes fast)
6. Open the created movie in MoviesToGo (or another iPod Video Exporter)
Then your video will be able to play on the iPod with sound, and its free.
Hope This Works For You Guys

Missing sound between video clips

Similar Messages

Maybe you are looking for