Missing sound channels with SB X-fi fatal

In Fallout 3 there are no voices in the dialogues and the sound is just plain horrible in BF242. Music sounds like it could be better. I have tried a complete unistall/driver sweep/reinstall and no luck. Updated drivers from creative. When I run the speaker test the left and right channels are coming from all speakers all the time. Is there a way to keep the software from crashing after I make some tweaks? Not very stable when switching modes.

Can't access the mode switcher ->?did you install Volume Panel,?Control Launcher? They both must be installed from?the driver cd if I'm not mistaken; installing only the latest web update won't work. As for driver updates, we've been stuck so long with the Nov 5, 2005 release... And now hardware vendors seem to have Vista on their priority list... I'm afraid?we'll have to do with what we have for a while :/

Similar Messages

Premerie Pro CC - have sound on timeline, yet when I export file i am missing sound in one tiny clip. Can I be related to working with Merged clips?

Hello Premerie Pro CC community,
I need help, I am working with merged clips (the video footage shoot with a DSLR and different audio recorders). I have a timeline in premerie with sound all finished. Everything was fine until I when and fine tuned some of the audio, just added key frames to correct and now when I export my sequence I am missing sound in one little clip of the entire mov.
Does it have to do with sound and editing with a merged clip?
I have tried to export in several different settings and still the same result, and when I look at my timeline the sound is all there.
I have until the end of Monday to figure what I have done incorrect
thanks
-DragonFly

In case it is a phase problem, try adding fill left effect to the faulty clip.

Sound Blaster X-FI (Platinum) - Sound Channels resetting with several programms.

Hello, I got a Sound Blaster X-FI Platinum installed with the newest final drivers and using this card with XP-Home SP 3.
Under the Volume Section I can manually select how much volume I need on the soundchannels from -8, well I did my own specific configuration for me with adjusting the channel volumes for each.
When I start Power DvD (7 or 8 Ultra doesn't matter) or I make a MSN call, all the sound channels are resetting to the default value... and I have to adjust it everytime new...
Is this a bug or what can I do to resolve this?
Really need help... its really annoying to reconfigure it everytime !

UPDATE:
Ok, so I tried to uninstall it all again and the computer froze up so I restarted it and windows "found new hardware" again and i let it do this:
<img alt="" src="http://img.photobucket.com/albums/v609/darrennicole259/de9d28b.jpg">?
It hung up there a little so I went to uninstall the X-Fi again because of it not responding last time and it uninstalled successfully. SO now when that screen closed I got this message:
<img alt="" src="http://img.photobucket.com/albums/v609/darrennicole259/3fe66b89.jpg">?
I don't know if it is going to work or not now, but I am going to restart the computer. I do not have anything from the disc installed so we'll see what my device manager looks like and see if it is working...

X-Fi sound channel failure.

X-Fi sound channel failure. I am currently using an X-Fi XtremeMusic PCI card on a 5. speaker system. Sound is not correctly generating on the all speaker channels. When I first started having this issue, the front right channel stopped generating sound through the X-Fi software. Channel tests would produce sound on all the other speakers. However, while playing music or a game, sound could faintly be heard on the front right channel. Setting the speaker options to use head phones instead of 5. speakers would work fine, but would not generate sound properly for the front right channel under any other configuration. I have double checked all the connections and the speaker unit and they are all set up and functioning correctly. Switching between Entertainment mode and Game mode did not seem to fix or alter the issue.
I? uninstalled and reinstalled the drivers with the latest driver (2.8.008). All the speaker channels started working again when I did a quick channel test. However, once I adjusted the volume control to 00%, the rear left, rear right, center and subwoofer channels all died. The headphone setting still works as expected, and switching between any other speaker settings did not otherwise change the results. Switching from Game mode to Entertainment mode did cause a new quirk though. The channel test labeled the front left speaker correctly, but sent the front center sound to the front right speaker and from there no other channels responded.
So right now I am trying to determine weather this is a software issue or a hardware issue. If its just hardware, I can solve that problem by getting a new card. If its software, obviously getting a new card (same/similar model) is not a sure fix, but fixing the software issue would save me from buying new hardware.
I am running Windows XP SP3 on an AMD Phenom 3x 8750, nForce 750a chipset and a Gforce 9600 GT. The X-Fi card is the only addon device on the PCI bus.

Re: X-Fi sound channel failure.e How? Are there instruction on how to do that?
What I've done so far is use the Creative Diagnostic to test everything to make sure it is working properly. It says it is. I checked the Device Manager, and everything seems to check out there also.
I think something might be missing. When I tried to download the lastest version of Creative Diagnostics, everything seems to be just fine, until the very end. That's when this message comes up? "Setup did not detect the required components. Setup will exit." Then when I checked to see if anything was interfering with the Creative software, a yellow question mark does show up, but not by or in the Creative part. It is 2 spots above, and says "Other Devices--Audio Device on High Definition Audio Bus"
What could be missing though? I still have the Creative CD to download everything. I've tried that, but still, that yellow ? comes up and says? "Setup did not detect the required components. Setup will exit."? Shouldn't everything be in that CD!? It always worked before.

5.1 audio is missing one channel and other stories

Ok, I started another post earlier about this problem, but I thought I'd explain it a different way.
Here's my problem. I go into the MSI Sound Manager and go to the speaker test tab. I click on every speaker and everyone of them works except the REAR RIGHT speaker. No sound comes out. If I put it up to my ear, there's some static but no sound! I tried every version of the Realtek driver under the sun as well as every BIOS update from 1.10 up to 1.9b2.
Here's the second problem:
I RMAed the first board to Newegg and they sent me another one. The second one did the same thing. MSI suggested that I take the mobo out of the case because maybe it was a grounding issue. I did that (had everything hooked up on a phonebook) and it didn't change anything. So, instead of sending back this board too I figured I'd try a Sound card instead. I picked up a turtle beach santa cruz card, disabled the onboard sound and installed this board. On that board, The front and rear channels work but nothing comes out of the center. Am I just so lucky that 3 pieces of sound hardware don't work for me?
All I want is 5.1 sound!
Here's my computer
500W Power Supply: +3.3V 28A, +5V 50A, +12V 18A, -5V 10A, -12V 1A, +5VSB 2.5A
AMD Athlon 3200+
MSI K8T Neo FSR
2x512MB VData PC3200 RAM
eVGA GeForce 6800 GT
NEC DVD Burner
Optowrite CD Burner
250GB IDE WD Hard Drive
Samsung Floppy

microsofts has a sound test program that will test 5.1 channels, and says right front left rear, etc. so if your still missing sounds after two boards, i would examine the jumpers , try both front and then rear jacks, then try the speakers on a different system , also look at speaker calibration and check speackers, physical knobs, fader balance etc..
also i just checked ebay and audigy2's can be had for 30$ or so, and may be worth investigating. are you in the us.
but i have a suspition that the problem is either the jack is not all the way in or speaker related, or a setting, as the chances of two boards with the same problem is slim but not impossible.

No TV sound - Problem with Pulseaudio and Gnome

Hi Community!
Since January 2013 I got big problems with the sound of my tvcard. The card is a Sundtek Media TV Pro. But after all the problems have nothing to to with the card itself!
So far I found out, that the problem is with Pulseaudio.
- Sound works under Windows on same PC.
- Sound don't work under Arch - not with tvtime, not with vlc, etc.
- Problem occurs even on a new installed system with the Arch-2013-02-01 install medium.
cat /etc/mediasrv.log
[1033] Pulseaudio connect reported an error (6 - Connection refused)
[1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
After setting up a new Arch installation with just xorg-server, gnome, tvtime and the sundtek driver from AUR I run journalctl -b:
Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c:
Daemon already running.
With sudo journalctl | grep 'Feb 10 16:2' I get the following output:
Feb 10 16:25:01 hightower rtkit-daemon[489]: Successfully made thread 488 of process 488 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Feb 10 16:25:14 hightower rtkit-daemon[489]: Successfully made thread 606 of process 606 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 10 16:25:15 hightower rtkit-daemon[489]: Successfully made thread 636 of process 636 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c: Daemon already running.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument:""): initialization failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] socket-server.c: bind(): Die Adresse wird bereits verwendet
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Konnte Daemon nicht initialisieren.
Feb 10 16:28:55 hightower pulseaudio[997]: [pulseaudio] main.c: Start des Daemons fehlgeschlagen.
So, if I understand right, pulseaudio is alreade started by the rtkit-daemon and gnome couldn't start it again.
At https://bugs.archlinux.org/task/30926 I found a hint concerning /etc/xdg/autostart/pulseaudio.desktop and /etc/xdg/autostart/pulseaudio-kde.desktop.
After removing them from /etc/xdg/autostart and running journalctl -b there are no more errors.
With sudo journalctl | grep 'pulseaudio' I get:
sudo journalctl | grep 'Feb 10 17:4' | grep 'pulse*'
Feb 10 17:41:42 hightower rtkit-daemon[485]: Successfully made thread 484 of process 484 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Feb 10 17:41:55 hightower rtkit-daemon[485]: Successfully made thread 625 of process 625 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
In my opinion all looks ok! I also checked the channels with the alsamixer and it looks good, too.
So I ran vlc v4l2://:dev=/dev/video0:width=720:height=576:tuner-frequency=510750:adev=/dev/null:standard=255 - but still no sound.
With cat /var/log/mediasrv.log I checked the drivers logfile:
2013-02-10 17:48:55 [343] SETTING DVB-C
2013-02-10 17:48:55 [343] switching to analog TV
2013-02-10 17:48:56 [343] SETTING PAL/SECAM
2013-02-10 17:48:58 [343] invalid audio input selected: 2
2013-02-10 17:48:58 [343] Setting frequency: 510750000
2013-02-10 17:48:58 [343] Using settings for Europe
2013-02-10 17:48:58 [343] Set Pixelformat: 0 YUV 4:2:2 (YUYV)
2013-02-10 17:48:58 [1033] Starting audio processor (PID 1033)
2013-02-10 17:48:58 [1033] initializing audio in audio processor
2013-02-10 17:48:58 [1033] loaded local pulseaudio driver
2013-02-10 17:48:58 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
2013-02-10 17:48:59 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
I started tvtime again. This time I ran rm -rf ~/.config/pulse/ and killall pulseaudio to kill the Pulseaudio server. I instantly got a loud noise out of my speakers.
I closed tvtime and re-opened it. And there it was: TV SOUND OUT OF MY SPEAKERS!
But now, when I run pavucontrol I get:
Connection to PulseAudio failed. Automatic retry in 5s.
In this cas this is likely because PULSE_SERVER in the Environment/X11 root Windows Properties or default-server in client.conf is misconfigured.
This situation can also arrise when PulseAudio crashed and left stale details in the X11 Root Windows.
If this is the case, then PuseAudio should autospawn again, or if this is not configured you sould run start-pulseaudio-x11 manually.
I got the information from Sundtek, that Pulseaudio should not be started as system service. Instead, every user should have an own Pulseaudio daemon and that PA was concepted this way. But they don't know how it is implemented in ArchLinux.
I also don't know it exactly. So the question to all you ArchLinu pro's:
How is PA implemented in Arch? And how can I sustainable solve my problem?
Thank you for your time and help!
Durag

There is just one more thing I found out.
After logging into Gnome and running ps aux | grep pulse I get:
rebel 727 0.7 0.2 444316 10288 ? S<l 03:02 0:00 /usr/bin/pulseaudio --start --log-target=syslog
rebel 731 0.0 0.0 71236 2652 ? S 03:02 0:00 /usr/lib/pulse/gconf-helper
rebel 843 0.0 0.0 17396 1184 pts/0 D+ 03:03 0:00 grep pulse
To get the sound to work I run:
rm -rf .config/pulse/
killall pulseaudio
killall -9 pulseaudio
I again run ps aux | grep pulse
rebel 4016 4.2 0.2 510124 11528 ? Sl 03:06 0:02 /usr/bin/pulseaudio --start --log-target=syslog
rebel 4020 0.0 0.0 71368 2700 ? S 03:06 0:00 /usr/lib/pulse/gconf-helper
rebel 4046 0.0 0.0 19456 1216 pts/0 R+ 03:07 0:00 grep pulse
I can recognize that the STATs have changed. Maybe this can help to solve the problem?

I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1 now my problem is that all my past work which i did on older version on GB, has missing sounds in it.

I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1
now my problem is that all my past work which i did on older version on GB, has missing sounds in it. so here are my questions
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
thanks

3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
See: This document explains what the in-App purchase is about.
Expanding GarageBand for Mac (v10.0) content with an in-app purchase
Do you still have your old Mac?
How did you migrate from the old Mac to the new Mac? Did you transfer your old software and documents using Setup Assistant? Then your old GarageBand '11 version should have been migrated, and all your instruments.
if you did not migrate GarageBand '11, copy your old Instruments Library and Loop Library over from the old mac. Copy the following folders to a thumbsdrive and merge the missing dontents into the corresponding folders on your new mac: (from the system library - the top level library folder on your Macintosh HD):
/Library/Application Support/GarageBand/
/Library/Audio/Apple Loops/
And if you would like to continue to use GarageBand '11 for access to missing features, copy also /Applications/GarageBand over, but to a subfolder of Applications. I recommend, to install the old GarageBand as well. It can be used in parallel to GB 10.0, and will come in handy, if your old projects are having problems.
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
The JamPacks are nice to have, a terrific collection of instruments and loops, but if you did not have them previously, that will not help with your missing instruments. You can instll them by buying Mainstage 3. They work well with GarageBand 10.0
-- Léonie

Sound problems with vista 32 bit on xfi xtremegamer

hi im havin sound issues with my sound blaster xfi fatality xtremegamer on vista 32 bit. the sound will sound like a skippin cd or sound like it is stuterin for a few seconds than it will play fine than do it again later on. i was wounderin if its a driver issue with vista or my sound card has broke? i had it runnin on xp and had no problems. can anyone help me please as my card is only abot 8 months old so if it could be faltiy i am still covered by warrinty.

I don't know if it's the driver that's causing a problem or if it's one of your components that's causing a problem. All I know is that the X-Fi is working great on my system, both in XP Pro and Vista Business. I'm not 100% sure about this, but I think I installed the driver first and then the software from the leaked Vista Suite that I downloaded from a link in a post on this forum. Never had a problem with any of the previous drivers either, but on the other hand this system was built in november/december last year, so the hardware was fairly new at the time.

Can I playback in both channels with my audio interface?

From what I've found so far I'm afraid the answer is already "no" but I have to ask for myself.
When I record into QuickTime movie (not Pro) using my Alesis IO|14 Firewire interface, it only plays back on the left channel.
Is there ANY way to get it to play back on both channels? (Or is this a sneaky way of urging us to upgrade to QT Pro?)
I'm assuming the audio quality of my M-Audio Nova condenser mic is better than my iMac's built-in mic, which is why I'd really like to do this. I don't even need true stereo, just both channels playing back.
(QT 10.1, on Lion)
Thanks.

The mic and interface record just fine into GarageBand, either as stereo or mono, and plays back out of both channels with the same setup, so I think the problem is with QT.
I don't find any kind of switch like that in the Hardware Direct Monitoring software for the Alesis, but I'll investigate further.
As I mentioned, I've searched this and other forums and it seems like this is just how QT is set up. But I was hoping for some sort of solution.
As previously indicated, I am not familiar with your IO device, so let me ask a few questions here.
1) Is the Nova mic you mentioned mono or stereo?
2) If mono, are you using two of them?
3) If mono and you are not using a pair of mics, does the input interface hardware have the ability to blend left and right (mic 1 and mic 2) input channels?
4) If mono, you are not using a pair of mics, and the device has no ability to blend left and right channels, are you you using an adapter cable to input a split signal to both input channels of the device?
If you are using a mono mic to input a signal to only one channel of the input device and are not/cannot blend this signal to both channels before output via the Firewire cable, then its sounds like your system is working normally and correctly. Basically, the Firewire audio is sent to the QT app as received from the Firewire device and recorded as is in stereo. I.e., if the left channel is active with the mic signal and the right channel is empty, then the audio is recorded only to the left channel and the right channel records the "nil" signal/nothing. On the other hand, GarageBand is an audio editor designed specifically to blend, pan, duck, filter, and/or otherwise taylor audio content as desired by the user. (I.e., which includes the ability to re-channel a single mono audio channel to both channels of a stereo track during the recording process which the QT app can't do.) In short, both apps are doing what they are designed to do as they were designed to do it. As such and as previously noted you have three basic options here.
1) You force the IO device to send stereo or two-channel mono audio to your Mac by using two separate mics, use a single stereo mic with dual channel audio output, using an adapter cable to split the single mono mic audio output line into two separate lines to be plugged into both channels of your IO device, or you can apply/blend the active channel to left and right Firewire output channels within the device if it has this capability.
2) You can use GarageBand to do create and export audio recordings instead of the QT app, or
3) You can purchase QT 7 Pro in order to fix your left channel problem post recording by simply applying the left channel audio to both left and right channels within the audio track so it will play as you want in any media player on your computer.
(Actually, there is a fourth option if you are using an external amplifier for playback, which is to simply use the output amplifier to accomplish re-channelization during playback rather than actually fixing the media file with QT 7 Pro.)

External USB sound device with SPDIF In?

Hi all,
I would like to know if Creative has any external USB sound cards with a SPDIF interface that works with Windows 7. I have an Extigy, and as I know it, it will not work with anything newer than XP.
I need a USB card with SPDIF input to bridge my Astro b.yond 5. SPDIF audio to my 5. speaker kit. For various reasons I cannot change the existing sound card in the computer.
Please help.

I don't know that sound card or application software, but the usual reason for this is that somehow you have reverted to the Microsoft wdm drivers rather than the asio ones you need for multi channel use.
This sometimes happens with some usb interfaces if you have connected the interface originally before installing any drivers. Removing any drivers associated with usb audio and then re-installing them might be worth a try.

Aperture video missing red channel on playback

Aperture video missing red channel on playback. Also some pictures appear to have missing pixels.
Video played with Quicktime doesnt have the missing red channel.
When trying to playback video,in aperture, it plays with missing frames, missing pixels and the crashes entire computer. My computer is a Mac Pro desktop with 24 gb memory with 3.33 ghz 6-core processor running Version 10.9.2 and Aperture 3.5.1
Any suggestions on my problem?
thanks
Pat

Never had anything before crash the whole system since OS8 or so.
Back up your system, without deleting older backups - just in case; that looks like a possible system trouble.
Also they some have been in Aperture for a while and they used to be OK.
Do the videos play in QuickTime Player or any other software, if you export or reveal the originals?
Can you play your videos, when signed into another user account?

Lumia 920: Incoming calls are missing sound

For a couple of days all incoming calls have been missing sound. After some trial and error I found that this can be fixed by placing the call briefly on hold and then taking it off hold. Outgoing calls have sound normally. This would indicate that some setting for incoming calls has not been properly reset. How can this issue be fixed? The phone has been restarted several times.
My phone is Lumia 920 with the latest Portico update installed (the problems actually started before the update and continued after it).

Have you tried a factory reset? OR even changing your sim card..
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Measure sound power and sound intensity with NI USB-9233

Dear,
I'm new to Labview and I have a question. A few weeks ago, we have bought a CompactDAQ system with among other things a USB-9233 card.
Now I have found out it's also possible to do sound measurements with this card.
I would like to do sound intensity measurements and sound power calculations. Is it possible?
I have LV 7.0 and the Sound and Vibration Toolset for LV. Do I need additional hardware and/or software?
We currently have B&K microphones and a B&K sound intensity probe. Can I use them with the 9233 card?
Or do we need to buy new equipment?
Thanks in advance,
Ronny C

The USB-9233 only works with pre-polarized microphones.   This means that the ICP (IEPE or Deltatron as B&K calls it) is always enabled.   IThe sound intensity probe you have probably requires a 200V power supply.   We have a new module coming out soon (January 2008) called the NI 9234 that offers options to enable/disable the ICP as well as AC/DC coupling and 51.2 kS/s sampling rate.
With this you could use your sound intensity probe with this module if you had a precision power supply.   It will also work with our other dynamic signal acquisition producuts like the NI 446X, NI 4472, and NI 449X that allow you to turn-off ICP.   You can use the 9233 with a GRAS sound intensity probe that has ICP type microphones.
In addition, one of the GRAS designers gave a presentation at NI Week on making Sound Intensity measurements with LabVIEW that I can send to you.   They are going to offer the code to interested users and we will post it on our web site.    In addition they plan to implement a multi channel version for vector intensity with our higher channel count products.
You would need to have the Sound and Vibration toolkit or Measurement Suite with LabVIEW 8.X for optimal results.   The latest version of the Sound and Vibration toolkit just released in December with additional features including the Sound and Vibration Assistant, human vibration filters, and more Express VIs.
Kurt Veggeberg
Business Development Manager, Sound and Vibration
[email protected]

Missing sound at the begining of chapter

I built a blu-ray disk with the following flowsheet (this flowsheet is OK according the "check project" feature) :
After the disk burning (with Nero 12 Burning Rom, not with Encore CS 6 which generates a well known error not fixed by Adobe), the "read first" before main menu is an AME transcoded sequence from PP CC. This sequence has an audio track, but only with the final burned blu-ray disk, the sound begins after about four or five seconds, not at the begining.
I checked the "montage" in Encore and the related .m2ts file in the BDMV directory : both are OK.
Is this a bug or if not where is the mistake ?

Hi,
Many thanks, I shall try and inform you.
I hace noticed that the sound start suddendly like it was blocked then
suddenly released.
Le 30/03/2014 18:53, John T Smith a écrit :
>
Re: Missing sound at the begining of chapter
created by John T Smith <http://forums.adobe.com/people/JohnTSmith>
in /Encore/ - View the full discussion
<http://forums.adobe.com/message/6255021#6255021

Sound issue with MSI K8N neo4 platinum

Hi, I'm having some sound problems with the onboard soundcard
The problem consist in LAGS when I play an mp3, I've tried a lot of drivers including the lastest version for alc850 from realtek but nothing!!!
I hope you can helpme
Thanks in advance

Quote from: dflw on 05-March-05, 06:11:17
http://www.newegg.com/app/ViewProductDesc.asp?description=29-102-178&depa=0
nice fix
yes I know, the ALC850 sux ....that's a good soundcard, probably my next upgrade
I miss the old good soundstorm, not the best to play games with eax but the sound quality was good

Missing sound channels with SB X-fi fatal

Similar Messages

Maybe you are looking for