Missing sound

IPhone 4S , iOS 7.4, latest iTunes, windows 8.
I recently had to reset my iTunes and iphone due to Apple communication discombobulation. After the reset I noticed I had no sound on my text plus app's incoming calls, texts, and credit movies. Just noticed I have no sound for power plug in and incoming emails.
To attempt rectification I have looked everywhere in settings and notifications, deleted app, hard started phone, reinstalled app, restored to old known working backup, and finally I reformatted and manually restored phone (not from backup). What am I missing? I know it's something simple but it is eluding me. Oh, it does have music, in call, and game sound. My alarm app plays music awesomely.

No worries, it did happened to me once.

Similar Messages

I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1 now my problem is that all my past work which i did on older version on GB, has missing sounds in it.

I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1
now my problem is that all my past work which i did on older version on GB, has missing sounds in it. so here are my questions
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
thanks

3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
See: This document explains what the in-App purchase is about.
Expanding GarageBand for Mac (v10.0) content with an in-app purchase
Do you still have your old Mac?
How did you migrate from the old Mac to the new Mac? Did you transfer your old software and documents using Setup Assistant? Then your old GarageBand '11 version should have been migrated, and all your instruments.
if you did not migrate GarageBand '11, copy your old Instruments Library and Loop Library over from the old mac. Copy the following folders to a thumbsdrive and merge the missing dontents into the corresponding folders on your new mac: (from the system library - the top level library folder on your Macintosh HD):
/Library/Application Support/GarageBand/
/Library/Audio/Apple Loops/
And if you would like to continue to use GarageBand '11 for access to missing features, copy also /Applications/GarageBand over, but to a subfolder of Applications. I recommend, to install the old GarageBand as well. It can be used in parallel to GB 10.0, and will come in handy, if your old projects are having problems.
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
The JamPacks are nice to have, a terrific collection of instruments and loops, but if you did not have them previously, that will not help with your missing instruments. You can instll them by buying Mainstage 3. They work well with GarageBand 10.0
-- Léonie

Lumia 920: Incoming calls are missing sound

For a couple of days all incoming calls have been missing sound. After some trial and error I found that this can be fixed by placing the call briefly on hold and then taking it off hold. Outgoing calls have sound normally. This would indicate that some setting for incoming calls has not been properly reset. How can this issue be fixed? The phone has been restarted several times.
My phone is Lumia 920 with the latest Portico update installed (the problems actually started before the update and continued after it).

Have you tried a factory reset? OR even changing your sim card..
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Premerie Pro CC - have sound on timeline, yet when I export file i am missing sound in one tiny clip. Can I be related to working with Merged clips?

Hello Premerie Pro CC community,
I need help, I am working with merged clips (the video footage shoot with a DSLR and different audio recorders). I have a timeline in premerie with sound all finished. Everything was fine until I when and fine tuned some of the audio, just added key frames to correct and now when I export my sequence I am missing sound in one little clip of the entire mov.
Does it have to do with sound and editing with a merged clip?
I have tried to export in several different settings and still the same result, and when I look at my timeline the sound is all there.
I have until the end of Monday to figure what I have done incorrect
thanks
-DragonFly

In case it is a phase problem, try adding fill left effect to the faulty clip.

Missing sound at the begining of chapter

I built a blu-ray disk with the following flowsheet (this flowsheet is OK according the "check project" feature) :
After the disk burning (with Nero 12 Burning Rom, not with Encore CS 6 which generates a well known error not fixed by Adobe), the "read first" before main menu is an AME transcoded sequence from PP CC. This sequence has an audio track, but only with the final burned blu-ray disk, the sound begins after about four or five seconds, not at the begining.
I checked the "montage" in Encore and the related .m2ts file in the BDMV directory : both are OK.
Is this a bug or if not where is the mistake ?

Hi,
Many thanks, I shall try and inform you.
I hace noticed that the sound start suddendly like it was blocked then
suddenly released.
Le 30/03/2014 18:53, John T Smith a écrit :
>
Re: Missing sound at the begining of chapter
created by John T Smith <http://forums.adobe.com/people/JohnTSmith>
in /Encore/ - View the full discussion
<http://forums.adobe.com/message/6255021#6255021

How do I restore missing sound output device in system preferencces?

How do I restore a missing sound output device in the System Preferences. My MacBook Pro only shows a Digital output in the Sound pane and a red light at the Digital Output Port.

If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.

Some files missing sound some not; all play on another computer

Both my wife and I have MacBookPros running 10.4.8. I put some video files from a VCD onto both our hard drives. They started out with a .DAT suffix, but I read that they could be manually changed to .MPG format by re-labelling and that they would play in QuickTime.
On my wife's Mac, it works flawlessly. On my Mac, it only plays the video but no sound. Other video files have sound on my Mac in Quicktime, and these VCD files play with sound in VLC on my Mac; so there must be something about my Quicktime (and not hers) that is causing this behavior. I replaced every QuickTime related plist, plugin and preference file I could find on my Mac with those from her Mac, all to no avail. Created a new user on my Mac and still no sound, only video. Any suggestions appreciated.
Second question. Canon XLIM's AVI movies show white screen but do have sound on both our computers. I've tried Perian but it crashes my Quicktime after briefly showing video. I must be missing a codec. If anyone with this camera has solved the issue, please let me know. the AVI movies play in VLC just fine.
Thanks for reading!
MacBookPro Mac OS X (10.4.8)

Thanks for getting back. I have the movies downloaded to my computer. I went to 'Get Info' and now I do see that they are Copy Protected. I was able to copy them to a DVD as I said. And to make sure I wasn't watching the original when I put the DVDs back in my computer for testing, I closed iTunes and used Qucktime to view them...and it worked. When I was burning them I got no warning that they were copy protected and went through the near hour it took to copy each one and it said I would be able to play it on 'any Apple or Windows computer..but not on a DVD player' and that was why I lent them to a friend to watch. But I guess if they are copy protected that was surely in vain. I wish I had gotten prompts telling me that, instead of wasting 5 DVDs and several hours..not to mention getting them to my friend and getting her all excited to see the films. Oh well...she will have to come over here to watch them. Thanks.

Soundtrack -missing sound effects from the library

Hi everyone,
I have recently installed Soundtrack onto my computer ( I have FCE HD) and the content onto an external HD.
Unfortunately I have noticed that there seems to be a fairly large section of sound effects missing, including "weapons" and "explosions". The reason I know these are missing is because there are greyed-out buttons for them where there is other ones present such as "Sci-fi" and others.
Can anyone help me find where these are- or do i not get a full sound effect library with FCE?
I'd be grateful if anyone could help.
Cheers,
Dave..

Soundtrack Pro, that comes with FCP, is a different application, with more capabilities, than Soundtrack. Did you connect all your sounds up? If yes, if you selected the folder that contains them, then that's all you get. You can add more loops from sound libraries online. There are pre-built categories that the Acid loops format uses that will get assigned to the different sections as you add them.

Missing Sound Output VIs

Hello all,
I'm trying to create a DLL that reads incoming sound data through my DAQ board and translates it for my sound card. Unfortunately, when I run the control program (LabWindows), I get error messages saying that the LabVIEW Sound Output VIs are missing. Do I need to add another library to my LabWindows project, and if so, which one? If not, why isn't LabWindows (or the LabVIEW runtime engine, if applicable) finding the VIs in my DLL project library?
Thanks!
Slowpoke
Slowpoke
CLAD (believe it or not!), using LabVIEW 8.5
They don't call me "Slowpoke" for nothin'!

Hi Michael,
Sorry for the confusion! Guess they don't call me Slowpoke for nothing...anyway, let me see if I can clarify matters.
The problem is not with the control program, per se. The problem only manifests itself when I call my DLL (created in LabVIEW) from the LabWindows control program. When I call the DLL from a LabVIEW control program, the DLL works perfectly. When I call the DLL from the LabWindows control program, the front panel of the called VI has a broken "run" arrow. When I click on the broken arrow, I get the LabVIEW error message popup. The LabWindows control program itself flags no errors.
I mentioned those VIs only to offer some context for the problem, i.e., in case you were wondering what their functions and purpose were, since they appeared in the error popup; if I muddled things up for you instead, again I apologize. Hope this is clearer!
Thanks,
Slowpoke
Slowpoke
CLAD (believe it or not!), using LabVIEW 8.5
They don't call me "Slowpoke" for nothin'!

Missing sound timecode after reverse telecine

We are doing a reverse telecine from a 29.97 project to a 23.98 project. We are missing our Sound TC info from our browser after we reverse telecine. Any ideas why?

Verify you've created the database file and your metadata is legit. Just removing pulldown doesn't require an open database - metadata is stupid and won't track unless you tell it.

Sisabled sound and missing sound icon..............!!!!

so noticed a few months back that my sound icon was missing which i didn't care. Today i decided to see if i could solve the issue so i found this advice that i found here.
Locate this file: com.apple.preferencepanes.cache
It's here: /Users/Library/Caches Drag that file from the Cache folder to the Trash, empty the Trash and reboot. Launch System Preferences and see if the Sound icon has returned.
Well, i'm still with out my sound icon and now seems like my sound is disable. when i press the sound buttons in the keyboard it show the speaker with all the bars(full sound) and underneath is O with a / crossing it. help anyone?

Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this file to the Desktop.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
Reboot.

Missing sound FXs on whack em all and bejeweled.

I have two phones they both have wheack em all and bejeweled. The sound works on both but one is missing the fxs like the sound when you hit the moles and the sounds when you match jewels. I have rebooted phone, restored phone, installed and removed and reinstalled app still no fx sounds on one of the phones. Anyone have any ideas?

I had a similar problem in some applications. The sound effects just disappeared and the application controls didn't have any effect.
I found the solution more or less by accident. I was testing wheter the loudspeaker works at all, started "ipod" and tried to play a tune. Nothing, but the reason was obvious: the ipod volume control (bottom slider) was set to minimum/off.
When I increased the volume, ipod started working, and miraculously, the disappeared game sounds returned, too. It seems that some applications actually use the ipod volume setting and if you set volume to zero in ipod, the game sounds disappear, too.

LE7 to LP8 Upgrade - missing sound files

Just now upgrading to LP8 from LE7. **** this is great software.
After the upgrade some of my preexisting Garage Band instruments
are missing some sound files. Notably, Pop Kit (drums), Pop Flute,
and String Ensemble.
Can I simply reinstall GarageBand from my MacBook Pro CDs?

It's a known issue - check out this thread:
http://discussions.apple.com/thread.jspa?messageID=6511987&#6511987
and many others too...

Missing sound recording

I understand that if you (1) copy a region from one GB file, (2) paste it into another GB file, and (3) delete the former file, then (4) the region will become blank in the latter file. I also thought that (4) could be avoided by archiving the latter file before deleting the former file. But I just did that and the region is now blank. So what did I do wrong or what do I still need to do?

Christoph Drösser wrote:
I was confused because in another thread you talk about "unarchiving" a file - this is certainly not something you do with a GB project that you "Saved as Archive".
If you did everything like you said you did, all recordings should be in your project.
Well, like I said, when I double-clicked on the archive file, a message indicated that the file was being unarchived . . . and I don't know what that means.
But I still don't know why a sound recording is missing in the GB file since I archived the GB file before deleting associated files. But here is one possibility. Some of the associated files were in the trash, but not yet emptied from the trash. If a file is in the trash, then does archiving not "reach" the sound recordings in the trashed files?
There seems to be nothing about these seemingly important details in the GB2 manual.
By the way, thanks Christoph!

Missing Sounds in Logic 8

Very peculiar happenings in the world of Logic today.
Sounds which were there before have stopped working, or playing different sounds. e.g. Strings play piano.
I haven't mucked with anything - it sounds to me like preferences or library issues?
Is there anyway to update logics library, without completely reinstalling?

Right - reinstalled Logic and realised it was not only Logics library which was screwed, it was garageband too! Much strangeness!
Very sure that this is the snow leopard upgrade's doing!
Logic is now showing two libraries for garageband - ?
Any ideas or input would be much appreciated.

Missing sound

Similar Messages

Maybe you are looking for