Missing source files

Hello
I've noticed that some of the music in my iTunes library are no longer linked to source files. It says "the original file could not be found". How can I get a complete list of the songs in my library that are no longer linked with their source music files?
Thank you
Doug

"An error has occurred while creating the article.
Source files for one or more article layouts are missing."
I experienced this error message–obstacle as well, when uploading my Folio to the Folio Producer. I was able to resolve it. One of my articles had verbiage which included an email address or the URL of a few websites in my iPad Vertical layout and my iPad Horizontal layout. My error existed due to the fact that not all of the email address and URLs of the websites were set as hyperlinks yet. To correct the error, I highlighted each email address and each website address missing hyperlinks, and from the Hyperlinks Panel selected: New Hyperlink or New Hyperlink from URL. The email addresses and the website addresses became active and visible in the Hyperlinks Panel showing an envelope or active link icon. I saved the article document and loaded it back into the Folio Builder. Then selected the Folio and Uploaded it to Folio Producer!

Similar Messages

  • Missing Source files when exporting to Soundtrack and LiveType

    An extremely frustrating "glitch" has occurred. When exporting to LiveType or Soundtrack, I receive and error message telling me that one or more of my source files are missing. I had been editing with these files in FCP 5 for the past few days with no problems. Initially I had no problem exporting to LiveType. Yet, today when I exported to Soundtrack Pro and subsequently LiveType, my source files just disappear. I have found some references to this issue in the discussions, but found no solution. If someone has found a solution since the last posting, please inform of it.
    Demetrius

    Export the clip using current settings.
    Then open that in LT, and work with it independently.
    Then export is and import it into FCP and use it to replace the original clip in the sequence.

  • Imovies error message missing source file

    I dragged event file in imovies into a project file. Now I cannot open them an error comes up 'source clip is missing'. The videos are there but will not play. Everything is deleted from my trash. How do I fix this

    Thanks to LoveFX4's search here: [https://support.mozilla.com/en-US/questions/801219 https://support.mozilla.com/en-US/questions/801219], we have an answer:
    # In the address bar, type "about:config", without the quotes
    # Press the enter key
    # In the filter window, type "Keyword.url", without the quotes
    # Double click on the "Value" field, and type in "http://www.google.com/search?q=", without the quotes
    Done!

  • Missing source files CharsetDecoder, CharsetEncoder

    I am using escjava, a static checker, and as a result of an error from the program noticed that there is no downloard for java.nio.charset.CharsetDecoder, CharsetEncoder and a few other files. Does anyone have a clue why this would be?
    Thanks in advance.
    Mark

    Both classes you metion are included in the publicly available sources in the JDK. Something else must be wrong with your static checker. What does it do? And what error messages do you get exactly?

  • Debbuging WPF missing source information

    Hello
    I'm new to WPF. I'm trying to put together a small project and I have a problem with debbuging. It's very similar to this thread https://social.msdn.microsoft.com/Forums...
    (which has no solution).
    Basicaly when I debug my project and an error happens instead of showing the code file / line (and stop there) I get the message:
    Source not available
    Source information is missing from the debug information for this module
    You can view disassembly in the Disassembly window. To always  view disassebly window for missing source files, change the setting  in the Options dialog.
    I do not want to always view the Disassebly window. I want to be shown the line of the code behind where the error happens.
    Please advice.
    Note (my system): Win 7 PRO, VS 2012 PRO, WPF / .NET 4.5 solution
    Thx in advance
    Miha

    EXCEPTION DETAIL:
    System.Reflection.TargetInvocationException occurred
    HResult=-2146232828
    Message=Exception has been thrown by the target of an invocation.
    Source=mscorlib
    StackTrace:
    at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
    at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
    InnerException: System.NullReferenceException
    HResult=-2147467261
    Message=Object reference not set to an instance of an object.
    Source=my_solution
    StackTrace:
    at my_solution.Home.ComboBox_SelectionChanged(Object sender, SelectionChangedEventArgs e) in c:\Users\....\Home.xaml.cs:line 68
    at System.Windows.Controls.SelectionChangedEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
    at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
    at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
    at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
    at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
    at System.Windows.UIElement.RaiseEvent(RoutedEventArgs e)
    at System.Windows.Controls.ComboBox.OnSelectionChanged(SelectionChangedEventArgs e)
    at System.Windows.Controls.Primitives.Selector.InvokeSelectionChanged(List`1 unselectedInfos, List`1 selectedInfos)
    at System.Windows.Controls.Primitives.Selector.SelectionChanger.End()
    at System.Windows.Controls.Primitives.Selector.SelectionChanger.SelectJustThisItem(ItemInfo info, Boolean assumeInItemsCollection)
    at System.Windows.Controls.Primitives.Selector.SelectItemWithValue(Object value)
    at System.Windows.Controls.Primitives.Selector.CoerceSelectedValue(DependencyObject d, Object value)
    at System.Windows.DependencyObject.ProcessCoerceValue(DependencyProperty dp, PropertyMetadata metadata, EntryIndex& entryIndex, Int32& targetIndex, EffectiveValueEntry& newEntry, EffectiveValueEntry& oldEntry, Object& oldValue, Object baseValue, Object controlValue, CoerceValueCallback coerceValueCallback, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue, Boolean skipBaseValueChecks)
    at System.Windows.DependencyObject.UpdateEffectiveValue(EntryIndex entryIndex, DependencyProperty dp, PropertyMetadata metadata, EffectiveValueEntry oldEntry, EffectiveValueEntry& newEntry, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue, OperationType operationType)
    at System.Windows.DependencyObject.SetValueCommon(DependencyProperty dp, Object value, PropertyMetadata metadata, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue, OperationType operationType, Boolean isInternal)
    at System.Windows.DependencyObject.SetValue(DependencyProperty dp, Object value)
    at System.Windows.Controls.Primitives.Selector.set_SelectedValue(Object value)
    at my_solution.Home..ctor() in c:\Users\...\Home.xaml.cs:line 59
    InnerException:

  • Error: missing ] after element list Source File: javascript:%20[object%20XULElement] Line: 1, Column: 9 Source Code: [object XULElement]

    Can you help me out in letting me know what this means and how I can fix this? I found it in my tools menu under error console. It was listed as a warning, but then there was a option to highlight and evaluate the original warning message that was listed as
    Warning: Expected color but found 'null'. Error in parsing value for 'background-color'. Declaration dropped.
    Source File: http://www.msn.com/
    When I cut and pasted message in the code evaluate box and pressed enter the warring message became an error then stated:
    Error: missing ; before statement
    Source File: javascript:%20Warning:%20Expected%20color%20but%20found%20'null'.%20%20Error%20in%20parsing%20value%20for%20'background-color'.%20%20Declaration%20dropped.%20Source%20File:%20http://www.msn.com/%20Line:%200
    Line: 1, Column: 10
    Source Code:
    Warning: Expected color but found 'null'. Error in parsing value for 'background-color'. Declaration dropped. Source File: http://www.msn.com/ Line: 0
    I am writing to ask for guidance on what to do and how to fix this.
    I current have Firefox as my default browser. I have IE 9 and Windows 7 home ed on my HP lap top that has AOL preloaded into it as the mail provider. I am a beginner user and when I got the computer my cousin set up Mozilla and Firefox as a search browser and I like it.
    I also have norton security

    I think, the problem is with the order (in configuration file) of path to search headers:
         /opt/oracle/product/10g/10.2.0/precomp/admin/pcscfg.cfg
              sys_include=(/usr/include,/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include)
              include
              include=(/usr/include)
              include=(/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include)
    In the filesys:
         ./usr/include/sys:
         -r--r--r-- 1 bin bin 17786 Aug 13 2007 types.h
         ./opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include/sys:
         -rw-r--r-- 1 root system 18288 Mar 22 2008 types.h
         mode_t came from:
         #include <sys/types.h>
    sys/types.h:
         * POSIX Extensions
         typedef unsigned int uint_t;
         typedef unsigned long ulong_t;
         * POSIX and XOPEN Declarations
         #if defined(_LP64) || defined(_I32LPx)
         typedef uint_t mode_t; /* file attribute type */
         #else
         typedef ulong_t mode_t; /* (historical version) */
         #endif

  • Prelude source file is missing

    Hi...
    I'm trying to add preludes at both the module and member level to a C++ GUI project.... and keep getting this annoying error "Code editing problem: the prelude source file is missing".
    Has anybody solved this one ?
    I can't find a way to generate such a file, although I found a template for such a file under the examples. I can workaround it by deleting my main source.cpp file and regenerating it... as long as I keep saving the .dt file I don't seem to lose any of my preludes.....
    Thanks.... Marty

    It is ZEBS (Electronic up load of bank statement)
    Regards,
    Chansa

  • I cannot get my photo to print for this reason -there is a photo in this print job which is missing its source file

    I'm working in lightroom to print cards with a custom print size.  When I set up the printer I get a message that reads "There is one photo in the print job which is missing its source file".  The preview shows my card as blank.  What is wrong?

    I would believe what the message is saying, that a photo is missing.  Do you know what photo you're trying to print, and if you look at this photo in Library, does it have a question mark on the thumbnail or other indication that the preview is there but the master photo is gone/moved?

  • My Indesign Link File missing source when reconnect my server, anyone can help me?

    My Indesign Link File missing source when reconnect my server, anyone can help me?
    I am Using Mini Mac, OS X 10.8, but my server is using Window server

    Did the server name change, or the drive letter assigned to it?

  • While accessing lighthammer getting missing HTML Source File error.

    Hi Friends,
    While tryining to logon to Lighthammer I am getting below error:
    (Missing HTML Source File: D:/Lighthammer/Illuminator/Temp/HomePages/admin/HomePage_admin.htm)
    On checking at location D:/Lighthammer/Illuminator/Temp/HomePages/admin I found that folder admin is not available
    and when we restore it from backup it get deleted as soon as we try to logon again.
    This is happening with all other users also. As a workarround we first logon to Lighthammer and when it gives error we paste folder for corresponding user (admin in this case) with home page under D:/Lighthammer/Illuminator/Temp/HomePages then it works.
    We are using MII version 11.5 on windows 2003.
    Please advise. Thanks in advance.
    Regards
    Ajay Sehgal

    Hi Diana,
    Thanks for you Reply.
    I checked directory D:/Inetpub/wwwroot/Illuminator/HomePages and it does not exist.
    But this directory also not exist on any other system including the production systems which are working fine.
    Also checked the permissions and there seems to be no permission issue.
    Regards
    Ajay Sehgal.

  • Need to re-burn a DVD, but some source files are missing. But Media Cache folder has them all.

    hi all. I have PE3 and the issue is this: I needed a DVD of a project I'd completed a year ago, and I didn't have an old copy of the DVD. So I decided to re-burn it. But on opening the project, it seems some of the source files have been misplaced on my computer, so it says 'media offline'.
    I figured I'd still be able to burn it though, because the Media Cache folder contained all the required files...
    However it starts to burn the DVD and then stops at 49% saying transcoding error.
    Q1: can you still burn a DVD if it says 'media offline' but you know all the source files are present in the Media Cache folder?
    Q2: what's the transcoding error?
    thx

    The Media Cache folder contains files that are only of use to PE during internal editing and will NOT solve your lost video problem.
    Once a Project is completed, that have no outside value.
    The contents are CFA and PEK files, which is the Conformed Audio and Waveform Display, respectively (no video here to my knowledge).
    And I'm not aware of any way to make them useful (outside of PE).
    If you happen to have your Project and source video/audio files intact, and then delete the contents of the Media Cache folder, upon re-opening the Project, PE will regenerate the CFA and PEK files. Again this is only if you have the Project and all the source files (Assets)...

  • UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

    UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before.  UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D  On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example 
    cannot read from source file or disk
    7z.dll
    Type application extension
    size 585kb
    date modified 7/14/2009 10.26pm
    other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
    Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-)  Thank you!
    I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
    Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
    I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba.  Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.  
    When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
    Windows failed to start.  A recent hardware / software change might be the case.
    To fix the problem
    Insert your windows installation disc and restart your computer
    Choose your language settings and click ‘next’
    Click ‘repair your computer’
    File: \boot\memtest.exe
    Status: 0xc000000f
    Info: the selected entry could not be loaded because the application is missing or corrupt.
    I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message.  I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy.  On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop.  I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

    Satellite L655-S5096
    Downloads here.
    the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
    My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
    Otherwise, order new discs from Toshiba.
    -Jerry

  • How do I relink my video files when the source files are located in an AVCHD folder structure?

    I am using FCP X 10.1.1 and I was completely done with editing a simple multicam video for a choir track and when I was exporting it it failed. I re-opened FCPX and found that there are several missing files, when I had just been working with them just a second ago! I know about relinking video files, but when I try to locate the source files (knowing where they are), the browser will not let me select ACHD file contents to get at the video files. Also, I cannot open the Library file for my project either.
    Here is a snap shot:

    If it comes down to it, use clip wrap to carve your .mov files out of the SD. I am confused tho - if you were originally able to import all you needed and still have the original media ? Why can't you do it again to add other clips? To "get in" to your Library, control click on it>show paskage... but do NOT MOVE anything only copy.
      Perhaps soeone else can shed light on this?

  • How do I re-attach missing Illustrator files

    APOLOGIES FOR CROSSPOSTING FROM INDESIGN FORUM (where I have not gotten any responses):
    Thanks in advance for reading this!
    I am converting an InDesign document to ePub and mobi. The document also exists as a PDF file (which, as you may know, can not be converted effectively to ePub).
    The InDesign file has been supplied to me with missing Illustrator .ai links for charts and graphs. There are lo-res  images in their places.
    I could manually import individual charts from the PDF file  into Illustrator, but there are dozens of them and relinking will be a huge job as it is. Any suggestions on how to transform all charts and graphs in the PDF file to .ai files OR import them directly into InDesign?
    Many thanks

    Thanks for your reply.  My replies are in line:
    1. how do you know the links are missing?
    The "missing, click to relink" question mark appears in all InDesign charts and graphs. The ID links panel is all question marks.
    2. how do you know the there are lo-res images in their place? (are they named as such? is your page display set to 'highest')
    When I create an epub or mobi file, the graphics are blurred, placeholders for the intended artwork.  I can anchor them, but they look pretty poor.
    3. can you contact whoever made the source files to acquire the missing files?
    I have tried (and tried and tried). Alas, this is a pro bono job for a UN development agency in Beijing, and no one can figure out where the files are (even though I found the a complete directory path to where they should be on SOMEONE'S computer).
    4. you can PLACE the PDF pages diectly into indesign (crop to the charts) and then delete the lo-res files after using them as a reference for placement and size--yes a lot of work, but if you got to, then you got to.
    At this point, if I can't come up with an alternative, I think it will be easiest to select each chart and graph from the PDF, then "edit using AI...", save them individually as AI files and relink them. I was praying for a more simple solution (other than finding those missing .ai files).
    There is an extension, but it's $100 and I'll probably never need to use it again.  I'd spring for it if I was sure it would save me much time.
    Again, thanks for your reply.

  • Can I change original source files in the project?

    I have a project which has become very disorganized over the last year of editing due to PPs poor ability to effectively share sequences/projects across multiple computers. My assistant editor used a different computer and so the links in the sequences point to multiple "source" files in the project (some in imported folders). However, there is ultimately only one original video clip. The problem is that Premiere Pro won't allow me to delete the nested versions of the source files without also REMOVING the clips in each of the sequences that uses them. For example, the project folder looks like this:
    - Original File Folder
         -- videoClip-001.mov
    - Imported File Folder (imported on one of the many exchanges between editor and assistant editor)
         -- videoClip-001.mov
    - Sequence version 1 (Uses the second video clip, not the first - although they are ultimately the same video file)
    If I delete the Imported File Folder, which only has a mirrored reference to the same video file as in the Original File Folder, then the clip in Sequence Version 1 dissapears. What I expect, rather, is to see a "missing media" message in the sequence so I can reconnect it to the version in the Original File Folder. But I can't. BIG HOLE in Premiere Pro CC.
    Why do I want to do this? In a large project with hundreds of video clips, keeping order is very important. With the sequences using multiple "versions" of the same video clip, that order goes down the tubes and it becomes impossible to work.
    Thanks for your help.

    I don't know of any way to clean up this project, but in the future, don't import the project, just import the sequence.  That will not create duplicates.

Maybe you are looking for