Missing Source in Generic Data Source in CRM

Hi All,
Currently I am having an issue with a Generic Data Source in CRM. The consultants have actually build a data source by referring to the transparent table. I am not too sure how he did it.
Whenever I open up the transaction RSO2 to look at the data source, the "Extraction from DB View", "Extraction from SAP Query" and "Extraction by Function Module" is totally blank.
How would I know how does the consultant setup this extractor? Is there any other program that will have some kind of code to pull it from which transparent table?
Thanks.

Hi David,
Your datasource is based on "extraction using Function module". You need to check the function module SMOX3_GET_DATA in se37 and find the tables from where the data is fetched.
Also check this blog by Roberto to find the table and fields: /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
Bye
Dinesh

Similar Messages

Generic Data Source issue in CRM.

Hi Guru's,
Generic Data Source with Table gave an issue "invalid Extracture structure template XXXXX of Data source XXXXX"
Generic Data source with Function Module gave an issue "Units field VOLUM_U for field VOLUME of DataSource ZTEST_XYZ is hidden"
Generic Data Source with View configured successfully but the data is not coming in Extractor Checker.
Three tables has taken in to consideration. I think there might be some issue with Join condition.
Can any one through light on this incident. Your help will be appreciated.
Thanks in Advance.
Venkat.

Hi Praveen,
yes you are right. I took reference field as VOLUM_U.
I have created Generic Table. Do you need me to take same table in the reference Table.
Thanks
Venkat.

Issue with Safety Upper limit for CALDAY Field for Generic Data Source

Hi,
I have given Upper limit as 1 for Calday field of one of the Generic Data Sources.
I have got a doubt here.If today's load got failed and I will rerun the load next day.So Will that new run captures all 2 days records.
Can any one advise me on this.
Regards,
K.Krishna.

Hi,
A one-day upper safety interval determines that an extraction run today, only fetches records up to yesterday (if the pointer has the day before yesterday date, the extraction comprises from the day before yesterday to yesterday). This is meant to avoid missing records that were about to be persisted in the database when the delta extraction is running but whose date was determined in memory before the delta started.
If pointer has today date value and you want to load data from today and yesterday, you should use a lower safety interval. Take into account that this could reload data previously extracted. Therefore, only InfoProviders with overwritting features (DataStores or InfoObject master data) should be used as targets of this extractions.
You can find further details at:
http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
I hope this helps you.
Regards,
Maximiliano

Time Stamp Delta field for Generic Data Source

Hi Experts,
I have a requirement to create a Generic Data Source based on view. This view on PA0006 and PA0105 tables.
Will you please suggest me which field i have to take as delta field.
Thanks In Advance.

Also, make sure that whenever a new record is created in those tables, field AEDTM is getting updated with system date else you will miss new records in delta unless there is a change in those newly created records.
Regards,
Gaurav

Selection in the Generic Data Source does not work

Hi gurus,
I have some problem with the selection in the Generic Data Source.
I have created a view as a base of a Generic Data Source.
This view is based on several table; i.e.: VBUK-VBELN (Sales Order number), VBAP-ERDAT (creation date of Sales Order), VBAP-POSNR (Sales order item), VBAK-BSTNK (Customer Purchase order number).
In the view, some join conditions have been defined: VBUK-VBELN = VBAK-VBELN, VBUK-VBLN = VBAP-VBELN.
I want to extract the Sales Order number, Sales order item and Customer Purchase order number for the Sales order created on the previous year.
On the Generic Data Source, I select VBELN (Sales order number) and ERDAT (creation date of sales order) as selection.
However, when I run the extractor checker (RSA3) on this Generic Data Source, the selection does not work at all, i.e.:
eventhough I restricted the Sales order number and/or the creation date of sales order, the generic data source ignores the selection criteria and extract ALL data.
Does anyone ever have similar problem? Did I miss some step in the Generic DAta Source creation? How to fix this problem?
Thanks a lot in advance.
Best regards,
Fen

Hi Fen,
Just check what is the output you get for the same selection for the view you created.
Bye
Dinesh

Problem during extraction using generic data sources

Hi
While performing extraction(master data) using generic data sources I am getting a problem.
while selecting application component, I am unable to find SD to select it.What should I do?
I selected CRM as application component and did the extraction , it is successful.
But what about if we want to select SD? I am guessing it as an installation problem ... Anyone plz help me
Thank you
Deepthi

Hi Deepthi,
Looks like the RFC connection between source system and BW system is broken..
Contact your basis team to check the connection what went wrong.
once the connection is re-established you can gohead ...
Try out this procedure
Type Transaction SM59.
a.) Open the RFC Destinations.
b.) Find your Source System and double click on it.
c.) Technical setting should contain information regarding your source
system
d.) Logon Information should contain source system client and name &
password for you remote logon.
**Suggestion : our remote name for our R/3 was ALEREMOTE. We use
BWREMOTE so that we can monitor without confusion.
e.) Execute your 'Test Connection' & 'Remote Logon'. You connection
should be You should NOT be prompted for a password.
f.) Repeat above to verify RFCs for other systems
regards
KP
Edited by: KP on Dec 14, 2009 12:11 PM

Generic Data Source with Function Module data mismatch in BI

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

the datasource frame work starts the function module several times.
1. the initialization
2. the serval times, until you "raise no_more_data".
check you coding: have you refreshed necessary internal tables.
Sven

Generic Data Source with Function Module data mismatch

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

HI rkiranbi,
1. FIrst you excute function module according to your paramers, you will get some records. then goto tcode RSA3 --> excute
Provide your Data source name and under setting we have options like Data records/calls, Display extractor calls and selections --> fields .
in that options you have to increase the values. and then you have to pass paramers in RSA3 according to your function module
selections in SE37. Now you will get equal values in both functin module selection and RSA3 Selection. if it fail means you need to
check coding logic in function module.
2. if your are getting wrong values in BI System then check with
              1. compare with PSA data and data target data (here you need to check with characterstic as well as keyfigures)
              if you find any mistake you need change the coding in function module according to client requirement.
              2. compare data with RSA3 and bi report data or data target data.
                             check it properly above steps, you will get solution.
thanks and regards,
malli

Regarding: Loading data from R/3 To BI for a Generic Data source

Hi Every,
Need Help Urgent
I had created a Generic data source with function Module as the data source, in Rsa3 it is working fine.
1-> I had replicated the data source to Bi then i had created a info package and then I executed the same. when it is getting the data and it is show in the request monitor (Number of records ) but the status is not changing from Yellow to Green.
Status in Step by step analysis is every step is green Except "Data selection successfully finished ?" (RED)
2-> Then I had seen the Back ground job in Source system which is executing still. I waited for it for a long time but nearly 30 min.
(I had done Steps one and 2 number of time by activating replicating the data source and so on, but still their is no change in it)
3-> Then I had canceled that back ground job with the help of BASIS (as i feel that it is something going wrong).
4-> I feel that their is some thing wrong in the Code of Extractor.
Please Help...............
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZBI_MATGRIR OPTIONAL
*Need to get the data only for two Gl account which are fro material purchase while MIGO
*G/L Account Numbers: 0010502001 0010502002
data: E_T_DATA1 type table of ZBI_MATGRIR.
RANGES: R_BUKRS FOR BSIS-BUKRS,
          R_BUDAT FOR BSIS-BUDAT,
          R_GJAHR FOR BSIS-GJAHR,
          R_HKONT FOR BSIS-HKONT.
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
           S_COUNTER_DATAPAKID LIKE SY-TABIX,
           S_CURSOR TYPE CURSOR.
*Declare
TYPES: BEGIN OF TY_FAGL,
    RBURS TYPE FAGLFLEXA-RBUKRS,
    RYEAR TYPE FAGLFLEXA-RYEAR,
    DOCNR TYPE FAGLFLEXA-DOCNR,
    BUZEI TYPE FAGLFLEXA-BUZEI,
    DOCLN TYPE FAGLFLEXA-DOCLN,
    PRCTR TYPE FAGLFLEXA-PRCTR,
    SEGMENT TYPE FAGLFLEXA-SEGMENT,
END OF TY_FAGL.
DATA: GT_FAGL TYPE TABLE OF TY_FAGL,
        GS_FAGL TYPE TY_FAGL.
IF I_INITFLAG = SBIWA_C_FLAG_ON.
    CASE I_DSOURCE.
      WHEN 'ZFI_GL_M4'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
     this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
        APPEND R_BUKRS.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
        MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
        APPEND R_GJAHR.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
        APPEND R_BUDAT.
      ENDLOOP.
*GRIR Inventory (RM/Stores/Spares/FG)   10502001
*GRIR Services & Others Payable   10502002
      R_HKONT-SIGN = 'I'. "i_t_select-sign.
      R_HKONT-OPTION = 'BT'." i_t_select-option.
      R_HKONT-LOW = '0010502001'.
      R_HKONT-HIGH = '0010502002'. "i_t_select-high.
      APPEND R_HKONT.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      OPEN CURSOR WITH HOLD S_CURSOR FOR
       SELECT BUKRS
              AUGBL
              ZUONR
              BELNR
              GJAHR
              BUZEI
              BUDAT
              HKONT
              BLART
              MONAT
              BSCHL
              SHKZG
              DMBTR
              WAERS
              FROM BSIS
             INTO TABLE E_T_DATA
              WHERE BUKRS IN R_BUKRS
                AND GJAHR IN R_GJAHR
                AND BUDAT IN R_BUDAT
                AND HKONT IN R_HKONT.
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA1
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
DELETE E_T_DATA WHERE BLART NE 'WE'.
      SELECT BUKRS
             AUGBL
             ZUONR
             BELNR
             GJAHR
             BUZEI
             BUDAT
             HKONT
             BLART
             MONAT
             BSCHL
             SHKZG
             DMBTR
             WAERS
             FROM BSAS
             into table   E_T_DATA
             WHERE BUKRS IN R_BUKRS
               AND GJAHR IN R_GJAHR
               AND BUDAT IN R_BUDAT
               AND HKONT IN R_HKONT.
           FETCH NEXT CURSOR S_CURSOR
              APPENDING CORRESPONDING FIELDS
              OF TABLE E_T_DATA
              PACKAGE SIZE S_S_IF-MAXSIZE.
append LINES OF e_t_data1 TO E_T_DATA.
DELETE E_T_DATA WHERE BLART NE 'WE'.
ENDIF.                             "First data package ?
    DATA: F_YEAR TYPE BKPF-GJAHR.
    DATA: F_PERI TYPE BAPI0002_4-FISCAL_PERIOD.
IF E_T_DATA[] IS NOT INITIAL.
   SELECT RBUKRS
          RYEAR
          DOCNR
          BUZEI
          DOCLN
          PRCTR
          SEGMENT
          FROM FAGLFLEXA
          INTO TABLE GT_FAGL
          FOR ALL ENTRIES IN E_T_DATA
       WHERE RYEAR = E_T_DATA-GJAHR
           AND DOCNR = E_T_DATA-BELNR
           AND RLDNR = '0L'
           AND RBUKRS = E_T_DATA-BUKRS
           AND BUZEI = E_T_DATA-BUZEI.
         WHERE RYEAR = E_T_DATA-GJAHR
           AND DOCNR = E_T_DATA-BELNR
           AND RBUKRS = E_T_DATA-BUKRS.
     AND DOCLN = E_T_DATA-BUZEI.
ENDIF.
LOOP AT E_T_DATA.
      IF E_T_DATA-SHKZG = 'H'.
        E_T_DATA-DMBTR = E_T_DATA-DMBTR * -1.
      ENDIF.
      CLEAR: F_YEAR.
      CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
        EXPORTING
          COMPANYCODEID       = E_T_DATA-BUKRS
          POSTING_DATE        = E_T_DATA-BUDAT
       IMPORTING
         FISCAL_YEAR         = F_YEAR
         FISCAL_PERIOD       = F_PERI.
      DATA: V_DOC(6) TYPE C .
      CLEAR: V_DOC.
      V_DOC = E_T_DATA-BUZEI.
      IF V_DOC IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = V_DOC
          IMPORTING
            OUTPUT = V_DOC.
      ENDIF.
     aS PROFIT center is not updated in all the lines in Bsis
      READ TABLE GT_FAGL INTO GS_FAGL WITH KEY RYEAR = E_T_DATA-GJAHR
                                                DOCNR = E_T_DATA-BELNR
                                                RBURS = E_T_DATA-BUKRS
                                                BUZEI = E_T_DATA-BUZEI.
      IF SY-SUBRC = 0.
        E_T_DATA-PRCTR = GS_FAGL-PRCTR.
        E_T_DATA-SEGMENT = GS_FAGL-SEGMENT.
      ENDIF.
*As we are using the amount DMBTR in which the amount
*will be in company code currency that is Local currency
*group currency always in the main company code currency.
      CONCATENATE   F_YEAR '0' F_PERI INTO E_T_DATA-FISCPER.
      MODIFY E_T_DATA. " from gs_bsis transporting dmbtr fiscper.
      CLEAR: E_T_DATA.
    ENDLOOP.
      S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
   ENDIF.

Hi,
Please check the log of same jobs for last week and check is today its taking more time,also check with basis is their any backup initited at same time.
Moreover until the background job failed automatically its difficult to imagine what is the exact issue.
Thanks,

Error While Creating The Generic Data Source.

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

n Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM

Error while creating Generic data source using FM

Hi Experts,
I try to create a generic data source using the Function Module via the transaction RSO2. I got the following error messages.
" Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA2 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA10 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
for all 10 fields of type CURR.
How shall i handle this issue..........any suggestions please........
thanks in advance
cheers
sailekha

Hi,
Are your CURR fields refereded to a currency field of your structure?? Maybe the problem is that the field containing the currency is refered to other table/structure and it has to be one of your structure fields.
Hope this helps,
Regards,
Carlos.

Error while doing DELTA Extraction (generic data source)

Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails.
With the same error
Please let me know how can I resolve this problem.
URGENT
gaurav

I dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working.

Creating Info Cube from Generic Data source in BI 7.0

Hi Gurus,
I have small issue regarding creation of info cube. currently using BI 7.0, I have created generic datasouce in R/3 and same replicated in BI. now i want to create infocube. but bit confused whether it has to be created through DTP or regular method of creating transfer and update rule for cube. your feedback will be highly apppricated.
Regards
Kamal Purohit
INDIA

Hi ,,
After done the Genric Datasource in R3, If u want extract that data from R3 to bw side. First we need Replicate the datasource.
->> Once datasource has replicated .
-> We need to assign the datasource to infosource if we are using in 3.5.
-> if it is BI7.0 after desinged the Cube or DSO.
-> we need to do transformation (3.5 transfer rule and update rule we are using that to first assign datasource to infosource).
-> here we need to map the fields for both DSO & Data Source. (Creating Transformation)
-> After done transformation we need to run the infopackage . . (Because still data is avialble in datasource if u run the infopackage the data comes from source system to Data source (Here Datasource is nothing but PSA).
-> still data is available for PSA.
-> if u want load data from PSA to Target (DSO/Cube),
-> we need to run the DTP. (When u execute the DTP the data fetches from PSA to data targets.)
-> still data is available for the Target(DSO)
If u want to load data from DSO to Cube.
We need to do the datamartstatus.
->->
When u want to load data from DSO to Cube.
-> ->Here no need to run the infopackage.
-> Here we need run the transformation (just for mapping the fields (ODS & CUBE)).
-> After done the transformation
-> we need to execute the DTP ....
once DTP has done successfull the data moved from DSO to Cube.
Regards,
Venkat.

Error while testing Generic Data Source extraction

I've created generic data source for Texts and Attributes in R/3 based on VIEW (Z table)
I get error "Error 6 in function module RSS_PROGRAM_GENERATE" while trying to test the data sources through RSO2
I guess there can be a lot of reasons... Please name me anybody who knows them...
thanx in advance

Hi,
Please Check the OSS note 328948 and it provides solution to same error what you have. Additionally you can have a look into this OSS note 705212 too.
Syntax error in the generated extraction program Symptom
You notice the error by one of the following symptoms:
The loading of transaction data from an R/3 system terminates with a syntax error in the generated extraction program. The monitor displays the error messages:
R3027 "Error & during the generation of the data transfer program"
RSM340 "Error in the source system"
The extraction within the extractor checker terminates with error message RJ028 "Error 6 in function module RSS_PROGRAM_GENERATE".The activation of transfer rules ends in BW with error message RG102 "Syntax error in GP$ERR$, row... (-> long text)" from the source system. Usually, the diagnosis in the long text of the error message is: "...could not be interpreted. Possible error causes: Incorrect notation or... "
Other terms
OLTP, extractor, data extraction, DataSource, Service API, SAPI,
R3 027, R3 27, RSM 340, RJ 028, RJ 28
Reason and Prerequisites
The error only occurs in the source system, if this contains Basis Release 3.1I and Service API (SAPI) 3.0C Support Package 6. SAPI 3.0C Support Package 6 is contained, for example, in PI 2003.1 Support Package 7 (see attached composite SAP note 673002).
Solution
To correct the problem you need service API 3.0C Support Package 7 in the affected source system. The attached composite SAP note 704971 explains in which software components service API 3.0C is contained, and what the corresponding Support Packages of these components are.
Alternatively, you can also copy the advance correction from the appendix.
Hope it helps.
Regards

More than one field in generic data source

Hi All,
We wanted extract Allocation data for the sales order from R/3 to BW. I am not able to find proper data source for it... there are two datasources..we wanted afs specific datasource
2LIS_11_V_ITM : Sales-Shipping Allocation Item Data
2LIS_11_V_SCL : Sales-Shipping Allocation Schedule Line
But its not reflecting allocated quantity at all...
So we decided to create generic data source.. but there is one problem for some allocation ARUN is initial.. so i cann't use ARUN as delta field... can i use comination of Sales order no,Item and Schedule line number as delta field....
Because in RSO2 i can define only one field as delta specific field....
How to proceed ???
Regards,
Viren.

Hi,
If you decided to use generic data source, make sure that, U'll have to take only
one filed as a delta, I suggest, you take any date field rather than the value fields
it may be created date/change date and so on so forth..
Regards,
Pattan.

Missing Source in Generic Data Source in CRM

Similar Messages

Maybe you are looking for