Missing space in bootcamp with vista

I installed Vista through bootcamp. I allocated 50gb of space. I have 4 auto cad programs installed at an average of 5 gb each. The Vista is about 11gb or so. That brings it up to about 31gb. I installed office and the C drive is showing that i only have 951mb of space left. When i click on the c drive and highlight everything in it and click properties it only shows like 35 gb of space that that stuff is taking up. Where is the other 15gb going to? I have no clue.

Hi,
you might wanna use TreeSize Free http://www.jam-software.com/freeware/index.shtml to find out what is eating up your diskspace.
As for the swap file GeekBoy mentioned I would leave it alone.
The hibernation feature and thus the hibernate file can be turned off and later on if wanted by following these proceduress http://support.microsoft.com/kb/920730/en-us
Regards
Stefan

Similar Messages

Use bootcamp with vista

How can I find out what version of Bootcamp i have? I want to partition drive and load Windows Vista, which BootCamp says only Windows 7 is supported. But my old PC runs with Vista and Lynx Mint and runs great. The question has anyone install Vista in Bootcamp enviroment?

1. Select the Boot Camp Assistant in the /Applications/Utilities/ folder and choose Get Info from the File menu.
2. Mac OS X 10.7 and newer don't allow Windows XP or Vista to be used when creating a Boot Camp partition, but support existing ones.
(84136)

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

Bootcamp with Windows Vista

Does installing bootcamp with Windows Vista significantly slow down a mac with a noticeable difference? I have a pretty new mac and am thinking about using this function. Does it make more sense to install windows xp? And what is a good amount of space to leave for the windows side to have?

Does installing bootcamp with Windows Vista significantly >slow down a mac with a noticeable difference?
What do you mean by this? Slows down the whole system? Or the performance of windows?; since you mentioned XP on your later question.
I have tried both windows (vista & xp) on a macbook, and for performance, xp is faster.
as for the whole system (macosX & windows) no diffrence in boot up and speed
as for partition size of windows... that would depend on you whether your mp3, pics, videos would be used on windows or mac... mine is 20gb with no problem

Re-installing Windows 7 with more hard drive space via bootcamp - Help!

I have installed Windows 7 via bootcamp with success. However I didn't give enough hard drive space to Bootcamp (only 6MB available! Whoops...) Can I just delete the Boot Camp partition and start again or is it more complicated?
Thanks for any help!
Steve :o)

Can I just delete the Boot Camp partition and start again
Either do that or use CampTune.
(52466)

HT5634 Bootcamp 4 driver problems with Vista 32 bit

Support says bootcamp 4 and Vista 32 only for my MacPro, but drivers won't install for anything but Windows 7. Should I download bootcamp 2.0 and reinstall Vista? Anyway to get drivers for Bootcamp 4 with Vista?

I don't know if it's the driver that's causing a problem or if it's one of your components that's causing a problem. All I know is that the X-Fi is working great on my system, both in XP Pro and Vista Business. I'm not 100% sure about this, but I think I installed the driver first and then the software from the leaked Vista Suite that I downloaded from a link in a post on this forum. Never had a problem with any of the previous drivers either, but on the other hand this system was built in november/december last year, so the hardware was fairly new at the time.

How do I download a missing purchased app with Vista

Purchased video portion on Pro Knot APP last week. It never loaded to my Iphone 4 or PC with vista. Tried to repurchase and message says I already have and it will be reloaded free. Still no video in APP

Hey randy.ky,
If you are having an issue with an item you purchased from the App Store, click on the link below to report it and our iTunes Store Team will investigate for you.
Report a problem with an item purchased from the iTunes Store, App Store, Mac App Store, or iBooks Store - Apple Support
http://support.apple.com/en-us/HT204084
Learn how you can request help with an item purchased within the last 90 days.
To report a problem or request assistance with an item purchased from the iTunes Store, App Store, Mac App Store, or iBooks Store:
Visit reportaproblem.apple.com in your browser.
When prompted, enter the Apple ID and password used to initiate the purchase of the item, then click Sign In.
Find the item you're having a problem with, then click Report a Problem next to it.
From the Choose Problem menu, choose the issue you're having.
Follow the onscreen instructions. You might be asked to describe the problem in a text field.
Click Submit, and we'll review your problem.
Regards,
- Judy

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

TX2-1015au Is it worth upgrading to windows 7 or should I stick with Vista

Hi there
I bought last month a TX2-1015au, I have been happy with it general perfomance, use it as a laptop at home to watch dvd's and play furcadia and some basic word processing in Office 2007 pro. At work I use it in a tablet form to read emails and surf the web.
Now I applied for the HP windows 7 uprade its been approved and my disc should be here soon.
It has Vista Home Premium 32 Bit, I stuck a spare ram module I had lying around at home so it has 3 gig ram now insted of 2 and will buy a new 2 gig module soon as I have some free cashso it has 4 gig ram.
I did as a experiment in stall a clean install of Windows 7 64 bit I had at home from the desktop pc, I didnt enter a serial number as I went as I was just testing. (i did make my recovery disks first)
Firstly it was booting fast, but after I installed the AHCI driver, the boot times slowed. I downloaded and installed the Smart media apps and they failed to launch except for the dvd player.
so heres some questions:
1) The serial number that comes with your HP upgrade kit, can that be used to activate a 64bit windows 7?
2) if you clean install can you use the windows 7 driver disk Hp supply afterwoulds?
3) If you install over vista following Hp's instructions how much disk space is lost?
4) if you clean install, is there undocumented steps to take to install the smart media and get it to install and launch.
5) Is there a away to back up the recovery partition?
6) if the os is not broke should I fix it? (should I upgrade or not)
7) Do you loose any features or funcionability after upgrading?
well thanks in advannce for your help,
rgds Wonderzebra

1. Yes, you can use the same license key you get from the upgrade kit from HP to activate win7 64-bit as long as it is for the same version (for example, win7 home premium 32bit to win7 home premium 64bit. I had my tx2 pre-installed with vista 32bit, upgraded to win7 32bit thru hp's kit, then perfomed a clean install to win7 64-bit.
2. I'm not sure, what i did instead was download the drivers from the HP website.
3. Not sure as well, didn't really bother to look.
4. Yes. Currently the mediasmart installer on hp's website is glitchy. You only have to do a special step on one, that is for mediasmart smartmenu. (make sure you haven't installed any mediasmart program yet before you perform these steps, otherwise uninstall them all first then reboot)
- download and install winrar: http://www.rarlab.com/download.htm
- download (but dont open yet!) the hp mediasmart smartmenu from hp's website
- right-click that file download from hp, then select "open with winrar"
- go to mssmartmenu folder, then to hp > tmp > src > then double-click smartmenusetup64.msi, it will launch the installer
- after the installation, you may now go ahead and download and install the rest of the mediasmart software posted on hp's website and it should install properly. Make sure that you have also installed HP Quick Launch buttons to make use of that "M" button on the screen bezel.
5. The recovery discs are already backed-up partiion.
6. There are lots of articles online about the difference of 32bit and 64bit OSes, but most people go 64bit to be futureproof, and to enable their laptops to recognize 4gb+ RAM,
7. Unless you have some old devices whose drivers are only for 32bit systems, no. 32bit softwares can run on 64bit OSes.

Hi can i use xp recovery disk for dv2000 to downgrade a dv2000 with vista pre installed thanks

Hi
i have 2 dv2000 laptops with different model no,s
one with xp factory fitted and one with vista factory fitted
can i use the xp recovery disks from the xp laptop
to downgrade the vista to xp or is it better to install windows 7 please
many thanks
maggieglanville
This question was solved.
View Solution.

Hi:
You can probably downgrade your Vista notebook to XP, but you don't have a license (downgrade rights) to do that from Microsoft.
Normally, only business notebooks and desktops were given downgrade rights to XP due to the risk of companies operations grinding to a halt because of software incompatiblities with some programs and Vista.
Personally, it would be better anyway to move on up to Windows 7.
Since your notebook came with Vista, it can run Windows 7. For any missing drivers you may have you can normally use the Vista drivers on your notebook's support and driver page.
Additionally, you may want to read through this dv2000 upgrade guide for Windows 7.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Windows-7-Upgrade-Guide-for-dv2000-model...
Paul

Adobe 7 is not compatible with Vista, If you are not satisfied with that answer...

Unfortunately for what I do for a living I can't use a mac, cannot WAIT till they do become compatible or I just switch professions!
I have adobe 7Pro because I MUST create PDF documents for my business, however when my laptop crashed for the 3rd time in less than a year and I was NOT about to pay HP $400 to reboot it, instead I had fun and smashed it (like in Office Space) and went out and bought a new Sony Vaio. This laptop is nice and all however now ALL new computers come with Gates newest form of a rip off, VISTA, which had so many issues they release a new update for it every day and professional companies wouldn't touch it, so they FORCED it on us small business owners and personal computer users, such CRAP! (If you notice all large corporations use XP, there is no Vista for large corps, there's a reason for that...
The people that do NOT have the $ to keep upgrading and paying for FIX ITS online from some unknown who has figured a work around are forced to use this crap!!! I'm BEYOND anoyed... ANYWHO I am installing my adobe 7pro and every time I open it I get asked to "ACTIVATE AGAIN" so I call in to get a NEW Activation code and a minute later it does it AGAIN... SOOO, I get Tech support and the IDIOT in India literally READS to me the following statements:
"Adobe 7 is not compatible with Vista"
I tell him, that's a lie because my friend uses it on vista.
He proceeds to READ to me "If you are not satisfied with that answer, then acrobat no longer supports Adobe 7". WTF?!?!? If I am not SATISFIED with that answer!??! aparantly he was NOT supposed to read THAT part!!! Laughing I proceed to tell him to piss off and hang up on him because I am SOOO tired of all these damn AMERICAN companies outsourcing their customer service to some 3rd world country where they pay these people $5 a week and have them just read from a ******* script for your problems, that is NOT technical support, that's BULL CRAP! I know 4 yr olds that read english better!!!
I am sick and tired of it... I might just take advantage of the 14 day return policy and go to Apple and buy a mac next week and change my profession sooner than I had planned JUST TO AVOID USING THIS CRAP!!! ADOBE YOU SUCK!!! Microsoft SUCKS!!!
If you run into this problem do what I am doing, go to Apple and buy a mac, we need to stand up against all this and pay attention to the COMMERCIALS that are VERY TRUE and drop Microsoft, IBM, anything Gates related and stop using their products!!!

Thanks Mike!
I'm just so frustrated, its bad enough my other laptop wasn't even 2 yrs old
yet and I've spent $800 to have it fixed twice already, this 3rd time I was
DONE... so I moved onto Sony, but this Vista just is making my life a living
hell, I just spent a fortune on the laptop, and now I have to buy Adobe 9
when my adobe 7 isn't even 2 yrs old... ugh... its just very frustrating and
nerve racking and is costing more than I make in a week in this business
(real estate processing)... I should sell Microsoft for a living, I'd be a
millionaire!
My husband's Mac has been through hell and back physically, is 5 yrs old and
we've never had to take it in for any upgrades or issues, its SO easy to
use... why can't Microsoft be the same?!?!
Thanks for your input and for being understanding of my frustration, I bet
you see those often! LOL

Windows 7 Clean Install on T500 with Vista

So my thinkpad t500 was infected (the entire recover area was also infected). It came with Vista and I just got the recovery media CDs for Vista. But I don't want to install Vista. I have a legitimate copy of Windows 7 that I purchased and completely formatted the entire laptop (all the partitions including the recovery media partitions which were infected). IBM does not sell Win 7 recovery media (if your laptop came with vista installed) unfortunately.
Now I have win 7 working but I have no internet connection.
I tried to install Thinkvantage 5.02 so that thinkvantage can automatically download the drivers (but the internet connection is not working so that is not going anywhere).
I had downloaded a couple of drivers from lenovo's website. I installed one of them called 7vr722ww.exe. It did not work (no internet connection). When I go to device manager the network adapters say they are upto date.
Any help with downloading and fixing the OS would be great. A step by step approach would be better. I saw some tutorials online but they are not very useful but I could have missed something here.
I tried this tutorial : http://forum.notebookreview.com/lenovo/642274-patchysans-guide-clean-installing-windows-7-thinkpad.h...
and could not go beyond step 8 (updating drivers does not work). I also don't have anything beyond the recovery discs for vista (not windows 7). I looked for any executables in the two recovery cds for vista but found none.
Thanks for any help that anyone may be able to offer.

Ok I am using 32 bit system (or I think I was but I accidentally installed using the 64 bit dvd! I am going to do another clean install to fix this tomorrow)
This time around (on my second/third attempt at clean re install) I kept the wifi radio signal on and win 7 installation asked me for a password and I entered it at it worked! (had some issues because I was trying to simultaneously connect via ethernet but once I unplugged the ethernet cable I am now online using my clean installed machine).
I am now downloading thinkvantage system update and it is downloading a lot of recommended and other drivers.
In my third time around clean install I deleted the 2 partitions that my thinkpad came with and combined all into one partition and formatted it (so as to avoid the virus from re emerging , unless the virus in the bios in which case I don't know what I can do).
Win 7 created its own 100 MB partition and lets hope that thinkvantage does the right thing and creates the recovery media and cds which I may then use to create my own recovery CDs for this computer.
I see that system update has ended the downloads and installs but I dont see any system recovery options. How do I get the recovery and rescue software on this ?
There is something strange that win 7 (and vista on t500 ) does: the computer freezes upon startup and I have to ctrl+alt+del and then click on task manager to unfreeze it. Is this happening with other people?
I must say that buying lenovo's thinkpad is like the most awful experience ever. I have a 2004 thinkpad from IBM and it still works just fine (with xp) and works better than my brand new 2009 T500! ... the T500 by lenovo is just awful. Months after buying it the right button of the mouse on the laptop stopped working. I use an external mouse now because I did not have the time to send and mail the entire laptop (I had to make do and now the warranty has expired and they wont even renew it!). When I try to type on the keyboard I accidentally triger the laptop's half functioning mouse ! it is just an awful experience altogether with the shoddy workmanship and garish clunkiness of design.

Satellite A200-1vp with Vista - CD/DVD drive failure code 39

Hi,
I have been burning and watching DVDs on my Satellite A200-1vp, with vista, since February, the last time I burned anything was a couple of weeks ago.
Suddenly there's a problem, no response when I load a disc and my divx player tells me no recorder found.
When I search in the device manager I get the message " windows cannot load the driver for this hardware" (code 39) " driver is corrupted or missing".
I tried uninstalling it and using the Toshiba upper/lower limit filter repair tool but on restart it still failed to install.
Should i try the Toshiba Recovery Disc and loose a lot of unbacked up programs/files, as last resort?
Would that work?
Anybody got any ideas?

Here is an interesting Microsoft knowledge article:
http://support.microsoft.com/kb/270008/en-us
You should firstly access the device manager and should remove the CD/DVD drive from the device list.
Then should access the registry and should remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Reboot the notebook and check if the CD/DVD drive would work again!

Trouble with Vista and Bluetooth

I'm having an issue with Vista SP2 and Bluetooth. I have Vista Home Premium SP2 running under Boot Camp on a MacBook Pro, and I have an Apple Wireless Mighty Mouse and Apple Wireless Keyboard I need to pair with Windows. I followed the instructions listed in the Boot Camp manual, but Vista won't let me create my own passkey, it just "pairs" the devices for me. When I close the window, the devices do not show up, nor do they function. I called AppleCare support, and have talked with all of who could help me, and they have determined this is an issue with Windows and that I need help from Microsoft. They said I have to enter my own passkey to get it to work, and they do not know why I can't. They're thinking it has something to do with a Windows Update.
Just wondering what can I do to get these paired up and working. I really need these to work since my MacBook Pro is on a notebook riser and it's awkward to raise up and type and click in such an uncomfortable position.
Thanks!
Nathan

I cannot get the apple wireless keyboard to work with my Mac Pro (Feb-2008 model) under bootcamp and Vista Home Premium 64. I had to upgrade from 10.5.1 in order to use Final Cut Studio 3, so I downloaded and installed OSX 10.5.8 update. Then I ran bootcamp and installed Vista 64. Afterwards, in Vista I inserted the original OSX 10.5.1 DVD and installed the drivers so Vista would recognize the apple hardware.
I went to pair the wireless mighty mouse and apple keyboard and the instructions say to enter 0000 for the mouse, and enter an 8 digit or larger number for the keyboard. Since the keyboard doesn't work, I couldn't enter anything so I let the system choose a number for the keyboard and let the mouse go without a number. Both show they are connected but only the mouse works. I also tried letting the system generate a number for both but only the mouse works. I tried turning off the mouse but then the system doesn't detect the keyboard at all. For that matter, I don't even like the mighty mouse anyway and prefer to use the mouse with my Wacom tablet so I could do without the mighty mouse if that would somehow help.
Is there a known issue with 10.5.8 and bluetooth under windows vista 64? What should I do? I must have Vista 64 in order to utilize 3ds Max 2010 and I must have a keyboard to use 3ds Max. Is there a driver I can download to make it work or do I need to buy a generic USB keyboard?
Thanks in advace for any help with this. I am looking forward to finally getting this Mac all set up.

Mac Pro Running Windows XP in Bootcamp with AIM 6.5 Can't Connect to iChat

I'm running Windows XP on my Mac Pro under Bootcamp. The Windows firewall is turned off (I'm running McAfee, and using it's firewall).
I am trying to talk to a friend who is using iChat on a Mac - I am using AIM 6.5 on my Mac running Windows. The connection fails as soon as iChat attempts to answer.
Mac OS 10.4.10
Bootcamp 1.4 (beta)
Windows XP
McAfee 7.2
iChat 3.1.8
Airport Express
I have set up McAfee to allow TCP and UDP connections over ports 2869 (TCP) and 1900 (UDP).
I have also disabled McAfee, and tried to use the Windows firewall settings discussed frequently in this forum (with appropriate exceptions). This also fails.
I have also tried to doing this under my Mac OS X bootup running PARALLELS. This worked once, but I have not been able to repeat it (McAfee was running when it worked).
iChat works great on my Mac under OS X. This is only a problem in Windows XP under Bootcamp.
I cannot connect to appleu3test01 either (under Bootcamp with XP). I can connect to appleu3test01 no problem running iChat on my Mac.
Might this be a Bootcamp related problem? Can anyone else test this for me (i.e. can someone try to use AIM 6.5 from Windows XP under Bootcamp)???
Thanks!

Hi Ralph,
{quote}If the Firewall was On I would ask if you had set it up as an Exception
http://www.ralphjohnsuk.dsl.pipex.com/page12.html#_Service{quote}
Yes, this is what I meant by,
{quote}I have also disabled McAfee, and tried to use the Windows firewall settings discussed frequently in this forum (with appropriate exceptions). This also fails.{quote}
I've noticed that you've posted solutions frequently in this forum. I read your posts, and visited your website. Its great information ... thanks for posting it! However, it didn't help me to resolve this particular problem.
You asked,
{quote}The question now becomes have you allowed it through McAfee ?{quote}
I tried resolving the problem with McAfee "ON" and "OFF". When it was "OFF" I Set the Windows firewall up per your instructions. Unfortunately, it didn't help. And yes, this includes setting up the "exceptions."
I don't think the problem is with McAfee.
You stated,
{quote}Having said that and seeing you have tried combos around this issue I would have to point out the AIM site says AIM 6.5 will only Video with other AIM applications. It has been reported here though that it does work with iChat{quote}
Yes, I have read that AIM 6.5 will communicate with iChat on several forums. Lots of people appear to have this working. I wish to use iChat on my Mac to communicate with friends running Windows XP (or Vista) using AIM 6.5. I like iChat.
Finally, you asked,
{quote}Next I would have to ask if the modem or router is allowing the AIM application ?{quote}
This is a very good question. I have not been able to test this. I couldn't find an AIM "test" address to use (like Apple's appleu3test01). Any suggestions?
Thanks for your help Ralph. This configuration is a little bit unusual, but it should work. I think the problem might be with the AIM configuration as you've suggested. I will continue to troubleshoot and report any findings here.

Missing space in bootcamp with vista

Similar Messages

Maybe you are looking for