Missing speaker settings

in my creative x Fi speeaker setting tab is missing. please see this picture...marked in red<img height="320" width="400" src="http://lh5.ggpht.com/_pMeVYDcfUKE/TKXFlMh_u3I/AAAAAAAAAD8/WTPI3fu8mwc/s400/Capture.PNG[/img] align="baseline">

Sorry I am not familiar with the OEM software bundled with this motherboard. Did you notice this change after upgrading the driver or are you comparing the settings with those screenshots you see on the Creative website? Please take note that there may be differences in bundled software, it's advisable to contact the motherboard manufacturer about this.

Similar Messages

  • Subwoofer volume disabled in speaker settings (Sound Blaster Liv

    Hello, I have the Sound Blaster Li've! card (CT4780) and Cambridge Soundworks FPS2000 speakers (4. system) on Windows XP Pro SP2. I've installed the latest drivers from Creative Labs.
    My problem: very little bass output from my subwoofer, even when I adjust the subwoofer dial to max. If I go to Speaker Settings in AudioHQ(?), the sliders for the subwoofer volume is disabled. How do I enable this?
    What are the correct speaker to sound card connections? My speaker system only has left and right jacks, and a SPDF(?) digital jack, but my sound card doesn't have the SPDF output. I connect my left/right jacks to the appropriate line out/rear out jacks on the sound card. I can hear sounds from all speakers, but would just like to have the subwoofer output more sound.
    The AudioHQ will only let me select a 4 speaker system type, and there is no 4. option selected. Maybe this is the problem? If not, then how do I enable the subwoofer volume slider in speaker settings of AudioHQ?
    Thanks,
    Jon.

    The Li've! Value is a 4.0 soundcard and doesn't have a dedicated subwoofer output. It can only dri've Front L/R and Rear L/R. The 4. speaker system generates its own subwoofer signal by extracting the bass from these channels.
    Bass redirection, crossover frequency, AC-3 decode are only available on the Li've!5. SB0060 and don't apply to yer soundcard. AC-3 decode on the card would be nice, but Creative pays Dolby a licensing fee for every soundcard to support the feature and your card was sold before they struck their deal with Dolby so all previously sold cards don't support it.
    Bass redirection and the crossover frequency is to send the bass from the front L/R, Rear L/R and Centre channels to the subwoofer. Since the Li've! models before the Li've!5. didn't have a subwoofer channel either none of this applies to yer card.
    The centre channel volume is also missing because your card doesn't have a centre/sub output.
    The only reason these features show up in yer drivers and applications is because all the Li've! and Li've 5. ( but not the Li've! 24 bit/7. ) models use the same driver.
    To fix yer bass issue, try adjusting the subwoofer level on the speakers and alternati'vely increase the bass level in the Creative Mixer applet.Message Edited by nvidiot on 02-07-2006 09:29 PMMessage Edited by nvidiot on 02-07-2006 09:42 PM

  • Can't launch Mixer, Speaker Settings, etc with Audigy 2

    I wanted to use headphones with my card, but found that I had no sound at all. Checking the speaker settings, I discovered that the dropdown wasn't populated. (I discovered a thread on Tom's Hardware forum mentioning this problem, but no-one seems to have a fix.)
    I tried?resetting to defaults, but got an error message saying that not all settings could be restored. I also tried the "Repair" option in Add/Remove Programs without success.
    I tried doing a complete removal (using the KB instructions)?and re-installation. Apart from getting an error message about PlxCore.plx missing (which I fixed by copying the file manually), the re-installation completed.
    However, I find that I can't launch many of the utilities, such as the mixer, EAX console, speaker settings. If I right-click on the volume control icon, nothing happens.
    There is a grey square at the top of my desktop that looks like it might be a partially-rendered toolbar.
    I also can't see an uninstall option in Add/Remove Programs for MediaSource. None of the MediaSource programs will launch either, but I can't uninstall them.
    I do have sound, but I have to use the windows volume control.
    I don't know what else to do. I have been through the re-installation procedure half-a-dozen times.

    Thanks, but it looks like I'm out of luck.
    I used the utility, but it didn''t help. (It also seems to have messed up my FireFox installation, for some reason).
    After booting into safe mode and running the utility, I tried installing again (and got the plxCore.plx error again). Results were even worse than before - I still don't have a working installation, and now I can't even uninstall the drivers - I get an error saying "an event was unable to invoke any of the subscribers."

  • Audigy 2 ZS Platinum Software Issue: Volume Control, Speaker Settings, Equalizer, C

    I installed my ZS Platinum back in December, everything worked fine for 2 months, then I started to hit trouble.
    First, the driver began hanging when I took my headphones in/out, resulting in no sound from either output. I updated the drivers and this problem went away.
    Then, I was gaming and all the sound stopped working. Reboots did nothing, so I tried to reinstall the drivers. This is how the problems began. The first time I uninstalled all my creative stuff, downloaded the newest drivers, and installed that. I didn't realize that I couldn't download all the bells and whistles off the drivers page.
    So, I unistalled those drivers, and used my CD to install the drivers and MediaSource. I encountered the PLXcore.plx error during install and every time I booted Windows. Also, none of the extra applications (Volume Control, Speaker Settings, Graphic Equalizer, CMSS) would run. I uninstalled, reinstalled and tried again.
    This is where I am now. I chose not to install MediaSource this time. Again, I encountered the PLXcore.plx error during install, but I'm not receiving the error when Windows boots (because I didn't install MediaSource?). But still, most of the little applications don't run. I see the Volume Control icon in my task bar, and if I press the mute button on the keyboard the symbol changes, but when I click on the icon, nothing happens. "Creative Volume Con..." flashes on the taskbar, and a 0px by 0px white box appears above the task bar. If I click anywhere else, they disappear. The Graphic Equalizer, Speaker Settings, and CMSS dialog do the same thing when opened. THX Console does not.
    Also, the on screen display for volume no longer pops up. Is this part of MediaSource? Should I install MediaSource even if I don't plan to use it's
    Running XP SP2 on an AMD X2 4200+ with the Audigy 2 ZS Platinum.
    EDIT: Thought I'd add in another problem I have:
    I usally run my DISH reciever's sound through my computer through the Auxillary 2 RCA connections on my front panel. When I boot World of Warcraft or Warcraft III (Both Blizzard games), the sound through this connection becomes very tinny and reverby. If I alt+tab out of the game, adjust the speaker setting (5. -> Headphones -> 5.) the issue goes away. But each time I start one of these games, the problem returns. Any ideas? Known problem?Message Edited by Cuttlefish on 03--200703:9 PM

    I'm sorry I can't help but I have the exact same problem. I have no Speaker, EAX or graphic eq settings. No telling what else don't work. I have tryied 0 different ways of removing and loading it back with any and all updats and without and no success. I hope someone here can help us.

  • My data tab is missing in settings on ipad

    My data tab is missing in "settings" on my ipad

    What iOS version do you use? I'm nof familiar with the "data tab." Where did you notice it before?

  • Unable to select 5.1 in speaker settings - only Front so

    Hello,
    i've got the following Problem with my Audigy 4 Pro.
    In Audi HQ->Speaker Settings im Not able to select anything besides 2. Speakers. If i click on the combobox nothing happens.
    I can activate 5. in the Windows Audio settings but after a system reboot this setting is set back automatically to "Desktop speakers".
    As a result i only hear Sound from my Front speakers.
    (I've connected the analog 5. Teufel concept e magnum with my audigy)
    The settings did work some time ago but now they doesn't (i didnt do something special besides selecting one time "headphones" as my speakers while i used them on a LAN-Party)
    No driver change or anything else.
    I really hope that this is a known problem and somebody could help me out with this. (Allthoug i didnt found anything similar with the board-search)
    Thanks in advance
    Hotkey

    I'm having the same problem with my audigy 2. I reloaded my computer and installed and updated the drivers, and when I go to the pull down box in Speaker Settings nothings there. Can anyone help?

  • Unable to install EAX console, speaker settings, e

    I've had problems with audio files skipping and causing the PC to freeze. I'm down to testing the sound card. I've made sure the onboard audio is disabled in the BIOS and I updated to the most recent drivers for my Audigy 2, but I'm having problems bringing up the EAX and speaker settings.
    Those are grayed out and unavailable in MediaSource. I did the cleansweep/uninstall procedures, but I still can't get those programs to work right. I downloaded the EAX console and speaker settings, but everytime I try to run them, they quit out since the required components weren't found.
    I have my speaker settings set to 5. in Windows, but I have no sound coming from my center or surround speakers and the bass is too loud. I can't change these settings without the EAX console. What's the problem? Why can't I install/access the EAX console?

    Lots of info, but no printer model, how you are trying to connect, what operating system.....
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Speaker Settings Won't Open, Crashes Every T

    I can't open my speaker settings. Every time I try, it crashes and I get the following error report (I'm pretty sure it has something to do with mfc42.dll):
    AppName: spkset.exe AppVer: .0.2.0 ModName: mfc42.dll
    ModVer: 6.2.43.0 Offset: 000250f7

    chalkygbg wrote:That dosent work! Only thing that is working for me is to reinstall windows 00%...
    Do the Creative team not got a clue whats is wrong?
    Please help, this is anoying...
    Chalky!!!

  • Audigy 2ZS 5.1 speaker settings won't h

    I've had a problem numerous times. It involves my Audigy 2ZS (Creative) sound card. What happens is that I'll install the most recent software update (driver and Audio Console) for the card and go through the process of making sure the Creative Audio Console recognizes my card as a 5. speaker system (which it is [Creative]). I also make sure that the box is checked to synchronize with the Control Panel in Windows XP. I then make sure Control Panel is set to 5. also. Almost without fail, within a relati'vely short period of time (day/days), the Creative Audio Console has lost the setting and either has Desktop Stereo or nothing as an option that I can chose from as far as a speaker configuration is concerned. I hope that someone of you forum people can lead me in the right direction. Thanks.
    Walter
    p.s. one other quickie. Should I get 5 speaker separation on all of my audio output or should I only expect it to get it on PC games?

    I'm betting it's your antivirus. Many antivirus programs block registry changes, when when you change the speaker settings, it changes them in the registry. You might check into disabling that and see if it makes a difference.
    As for when to expect 5. output, generally when you play something that is 5., you'll get 5. output. Most music for instance is stereo (2.0) so that's what you get when you play it. I suggest turning on "CMSS-3d" which will upmix stereo to 5. for you.
    Enjoy!
    Dale

  • Missing Customizing settings for software component ECC-DIMP

    Hi all,
    While running the T-code IE4n I am getting this error:
    Missing Customizing settings for software component ECC-DIMP
    This is working fine in IDES ECC 6.0 ,Could u please tell me how to resolve it for my othersystems.
    Thanks
    Yinyan Lu

    Dear Yinyan Lu,
    Please, have a look into the SAP note 767108 (IE4N: Problems due to missing notification Customizing)
    Solution                                                                  
    To correct this error, implement the correction instructions contained    
    in this note or import the relevant Support Package.                                                                               
    In packages                                                                               
    o  DI in Release 4.6C2                                                                               
    o  DIMP in Release 4.71 and higher                                                                               
    o  EA-APPL as of Release 4.7 Extension Set 2 and higher                                                                               
    notifications are created when installing and dismantling. In this case,  
    Customizing must be complete, otherwise errors will occur.                                                                               
    In DI Release 4.6C2 and DIMP Release 4.71 (and higher),                   
    follow the following Customizing path:                                    
      Plant Maintenance and Customer Service                                  
        -> Maintenance and Service Processing                                 
          -> Maintenance and Service Notifications                            
            -> Determine Properties of Notifications for Installing and                                                                               
    Dismantling Parts                                                                               
    Always maintain the notification type for installation and for            
    dismantling.                                                                               
    Follow the following Customizing path on EA-APPL as of Release 4.7        
    Extension Set 2 (and higher):                                             
    follow the following Customizing path:                                    
      Plant Maintenance and Customer Service                                  
        -> Maintenance and Service Processing                                 
          -> Configuration Control                                            
            - > Determine Properties of Notifications for Installing and      
               Dismantling Parts.                                             
    Always maintain the notification type for installation and for            
    dismantling.                                                                               
    What must you do if you do not want to use notifications in IE4N?                                                                               
    1.  You must always maintain the notification type in accordance with     
        Customizing described above.                                                                               
    2.  Create an individual, empty implementation for the BADI               
        BADI_CCM_NOTIF_GENER. To do this, proceed as follows:                                                                               
    a) Execute transaction SE18.                                                                               
    b) Specify BADI_CCM_NOTIF_GENER as the BADI name.                                                                               
    c) Use the menu <Implementation><create> to create an individual      
           implementation with a corresponding name in the Z namespace.                                                                               
    d) You enter the BADI Builder. Name the implementation, and then      
           save and activate your implementation. It is important that the    
           methods CREATE, FILL_CUST_DATA, MODIFY, SET_HEADER_MESSAGE, and    
           PRINT_NOTIF are empty.                                                                               
    Note that these steps are required, since the BADI                    
        BADI_CCM_NOTIF_GENER is equipped with a default source code that      
        includes the use of the notification.                                                                               
    As of ECC600, Note 1368876 replaces error message IEN 126 with error      
      message IEN 026, which is more precise.                                                                               
    Caution:                                                                               
    o  The error message mentioned above indicates that Customizing is    
             missing. To correct the problem, you must perform the relevant     
             Customizing settings for transaction IE4N.                                                                               
    o  As of ECC600, you do not have to activate the DIMP switch (this    
             may not be useful).                                                                               
    o  For more information, see Note 1368876.                                                                               
    I hope, it helps.
    Best regards,
    Roland

  • Missing projet settings and codecs on Premiere 5.5?

    Missing projet settings and codecs on Premiere 5.5
    when i open a new project in premiere, the most of the projcet settings/codecs are missing

    Hi.
    You can easily restore all of your apps, photos and podcasts.
    If you activated the iCloud service before updating, your Apps will be storaged "in the cloud" and ready to be re-downloaded. Otherwise, go to App Store and choose "Updates". Here, in the top of the screen, is the "Purchased"-button. Tapping here will give you a complete list of all your downloaded Apps, ready to be re-downloaded.
    As for your podcasts, plug your iPhone to your PC/Mac. Single-click your iPhone-device in the menu on the left. Once the iPhone-window appear, go to the tab-menu in the top of the screen and choose 'Podcasts'. From here you can decide which podcasts should be sync with your device.
    I hope this was helpful.
    Best regards.

  • Audigy 2 ZS speaker settings won't stay chan

    I listen primarily with headphones, so I have the speaker settings set to Headphones.
    Only problem is, whenever I restart my computer, the speaker settings change back to 2..
    Is this normal? Driver issues? Hardware problem?

    Here was my problem; I did not plug the power supply directly to the sound card. There's a spot on the top of the card for a 4-pin floppy connector. The external hub now turns on again =)

  • No rear channel playback when set to 5.1 in speaker settings?

    =No rear channel playback when set to 5. in speaker settings?I have a 4. speaker setup. It's the kind designed for computers that runs the line out into the subwoofer and splits the audio into each channel from there, unlike the standard home theater setups that run from a receiver. It's connected from the computer with two analog lines (left/right & rear left/rear right).
    The output modes available on the speaker system are stereo, stereox2, Prologic, quad, and Dolby Digital.
    I want to be able to set the speakers to Dolby Digital and and have my soundcard (X-Fi Titanium Fatalty) set to 5. Surround on the Speaker Setup screen. I believe this would support the most playback options. The problem is that when I test the audio channels I get no feedback from the rear channels. It works perfectly fine if I set the speakers to quad but won't playback the rear channels when set to Dolby Digital for some reason. I've tried disabling CMSS 3D with no luck either - Dolby[/b] or DTS soundtracks, you will need to turn CMSS off. Otherwise you might not receive each discrete channel."
    The closest I've been able to get to the optimal setting of 5. with the speakers set to Dolby Digital is to put the speakers on quad and switch to 5. in the speaker setup (and disable the center and sub channels so center gets mixed into l/r and sub gets mixed a little into each channel keeping each 5. channel broadcast even though it's a 4. setup).
    Any ideas as to why I can't get any rear channel playback with 5. and my speakers Dolby Digital?

    I'm having the same problem with my audigy 2. I reloaded my computer and installed and updated the drivers, and when I go to the pull down box in Speaker Settings nothings there. Can anyone help?

  • I need the Audigy 2 Creative Speaker Settings Util

    I have an OEM Audigy 2 card. I need Audigy 2 Creative Speaker Settings utility so I can use the "re-direct bass" option to get my subwoofer in my 5. headphones to work. However when I go to install the utility of course I get that annoying "device not detected" error. Does anyone know a way around this besides buying a retail version of this card? Would like to get my hands on a CD if possible.

    orion-74 wrote:
    I have an OEM Audigy 2 card. I need Audigy 2 Creative Speaker Settings utility so I can use the "re-direct bass" option to get my subwoofer in my 5. headphones to work. However when I go to install the utility of course I get that annoying "device not detected" error. Does anyone know a way around this besides buying a retail version of this card? Would like to get my hands on a CD if possible.
    You can find the link to download whole Creative installation CD from this patch (ctcomp.exe) (thanks to DVDKingdom), run it, have it point to the \Audio\Setup folder of the full software suite that you extracted, and then proceed with patching. If you?ve also downloaded the updated driver file from Creative?s site, you must run the patch again and point it to the main folder where you extracted it to. The application updates need no modification.
    I've done this Zs -patching, and it works well.
    jutapa

  • Vista64 and Danilek driver package--Graphic Equal. and Speaker Settings Don't W

    Installed Danielk driver package under Vista64, but Speaker Settings and Graphic Equalizer refuse to start. Uninstalled everything and reinstalled and still these apps.
    won't work--however, back last March in a previous iteration they were working. Has there been a Vista patch over the Summer that broke these two apps.

    You need to identify what you do that causes the error, its not on a timer.

Maybe you are looking for