Missing specific data in delta in 0CRM_SRV_IBASE_ATTR

Hello,
Sometimes, datasource 0CRM_SRV_IBASE_ATTR does not retrieve specific data in prod system (target ODS 0CRM_IBCO).
But it works with RSA3.
In the PSA, specific fields are missing.
The enhancement is developped in method ENHANCE_CRM_SRV_IBASE_ATTR (in class ZCL_IM_CRM_BWA_MFLOW) and data are retrieved with CRM_ORDER_READ function module
Have you got any idea ?
Thanks

Hi Cyril,
Sounds like the full load works well but problem happens for delta records. Since the record itself is there, only the value for extended field is missing, it is better to check the logic of your BAdI.
CRM_BADI_GET_BDOC is a better way to retrieve mapped data instead of using CRM_ORDER_READ. You can find some additional information from note 850817.
Best Regards,
York

Similar Messages

How to get missing data in Delta's

Hi
I will try to explain the problem, but I am not sure how successful I will be. Here is the scenario. We did fill the setup tables over weekend, but ran the initialization on BW side on Monday evening. It seem when I see the data later, we are missing Monday data in BW, and changes are being picked up for Monday, hence it is showing negative PO values. Is there anyway I can bring only missing day data as repair delta? Any suggestions would be highly appreciated.
Thanks
Pandiri

Hi,
Take a look at OSS note 739863. It has steps to repair Delta data in such situations.
Quite a few discussion happened on this before. One of the interesting discussion is in the link below.
A BW puzzle for you...I'll Award POINTS!
Regards,
Sree
Message was edited by: Sree Damodararaj

Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

Missing master data for Account number Delta

Hi,
I am working on production system,Some records are missing master data(attributes street,city for Account number for starting with Account number 9xxxxxx) for Delta load,Field lenguth is 10.these Missing records are getting loaded with full load or full repair.but I want to load load with regular delta load.Every day I am getting records with other Account number start with 1 to 8.and load is fine. Problem with only Account number 9xxxxxx.
Please help me whats the problem,where can i find related info.how to fix this issue.
Is there any delta setup problem
This generic data source ,pulling from table ADRC.numeric pointer.

Hi ,
Please check at source sytem side in RSA3 whether you are able to loacte the data with the mentioned account number............
please post your reply to proceed further
Cheers,
Swapna.G

Missing some master data for delta load( its very urgent please)

Hi,
I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
Address Number/ Addr Ln 1 Txt/ City Dstrct Nm
9025750333/ #/ #
help me its very urgent

Hi Sumanth,
check the delta queue and the V3 job is it running correctly ,
Have a look at OSS note :728687
and also see the following thread
Deltas are not available in Delta que
Delta Queues are not cleared in R/3
No data in RSA7 for 2lis_03_bf : HELP
check the data may b it is in modifide status not active.
regards,
supriya

Logical system not updated in the business system adapter specific data par

Hello Guys,
I changed a logical system name in the sld for a business system and that that is not reflected in the Integration directory adapter specific data tab.
I did a cache refresh using :
1) sxi_cache --- Full cache refresh, delta cache refresh
2) Hard cache refresh
3) In ID "Cleared SLD data cahe "
4) Refreshed the exchange profile
But no use
Can you please tell how i can get the logical system name for the business system updated in the Integration Directory.

When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there?

Extraction, Flat File, Generic Data Source, Delta Initialization

Extraction, Flat File, Generic Data Source, Delta Initialization
I have couple of questions regarding data extraction.
1.     If you have Data Source a Flat File e.g. Excel file I know that you have to create Data Source at BW side. How do you upload updates, by selecting Delta Update when executing next Data Load? Do you ever u201Cconvertu201D this Excel file into Application Tables to become SAP Source 
2.     Can you please give me example of situation where you had to create Generic Data Source? What is difference between Time Stamp, Calend. Day and Numeric Pointer. Which one is most common to select?
3.     I read somewhere that Generic Data Source does not have Setup Table. I thought that you have to have Setup Table in order to load transaction Data otherwise you will lock the Application Tables. Where am I going wrong im my thinking please?
4.     What are steps in terms of IP before, under and after Delta Initialization. I belive that you can do two ways:
Full Update - Initialize Delta Process (without Data Transfer) u2013 Delta Update or
Initialize Delta Process (with Data Transfer) u2013 Delta Update
Am I right? What is most common method and why?
5.     If you want to add a filed in Data Source after 6 month using it, you want to do it without re-init Delta Queue. You add field in RSA6, then provide info for ABAP to populate new filed (info u2013 name of Data Source, Extract Structure, field added, name of Application Table which contains the field). How does it work now as there is no SetUp table it has been deleted after Initialisation? How does Delta Queue know that it is going to receive data which has been expanded by one field or it may does not need to know at all?
THANKSSSSSSSSSs

Hi,
1. If you have Data Source a Flat File e.g. Excel file I know that you have to create Data Source at BW side. How do you upload updates, by selecting Delta Update when executing next Data Load? Do you ever u201Cconvertu201D this Excel file into Application Tables to become SAP Source
Once you create Datasource for A flat file extraction then it is file source system specific hence you cont change to Application table source Data source
In info package you can change the source as application server instead of desktop no need to change the DS
2. Can you please give me example of situation where you had to create Generic Data Source? What is difference between Time Stamp, Calend. Day and Numeric Pointer. Which one is most common to select?
When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
Check the below link for More about generic DS .
http://wiki.sdn.sap.com/wiki/display/BI/Generic+Extraction
for Delta capturing you can use
Timestamp(if the table has time stamp filed so it can stamp the last changed record in that table hence it is easy to get delta based on the time stamp)
Calday- (If the table doesn't have the Timestamp filed then search for Calday where you can stamp the delta based on the date when documents are changed )
Numericpointer : If the table doesn't above both then we go for this option where you can the numeric value change stamp )
3. I read somewhere that Generic Data Source does not have Setup Table. I thought that you have to have Setup Table in order to load transaction Data otherwise you will lock the Application Tables. Where am I going wrong im my thinking please?
Generic datasource nothing but we extracting data directly from the database table without any interface between the application/systems
4. What are steps in terms of IP before, under and after Delta Initialization. I belive that you can do two ways:
Full Update - Initialize Delta Process (without Data Transfer) u2013 Delta Update or
Initialize Delta Process (with Data Transfer) u2013 Delta Update
Am I right? What is most common method and why?
Correct
5. If you want to add a filed in Data Source after 6 month using it, you want to do it without re-init Delta Queue. You add field in RSA6, then provide info for ABAP to populate new filed (info u2013 name of Data Source, Extract Structure, field added, name of Application Table which contains the field). How does it work now as there is no SetUp table it has been deleted after Initialisation? How does Delta Queue know that it is going to receive data which has been expanded by one field or it may does not need to know at all?
Once you add the new field to structure(DS) you will get the data as on date onwards not historical data hence what is the concept of setup table ( delta records come from the Delta Que not from the setup table )
If you want histaric data to new field then you need to setp table deletion ...etc...
Hope it is clear..
Regards,
Satya

[JPA] Exception Description: Missing meta data

I'm getting the following error message trying to compile a simple EE App that
contains a single Entity Class.
Exception Description: Missing meta data for class [java.lang.Integer].
Ensure the class is not being excluded from your persistence unit by a
<exclude-unlisted-classes>true</exclude-unlisted-classes> setting.
If this is the case, you will need to include the class directly by adding a
<class>[java.lang.Integer]</class> entry for your persistence-unit.That class contains a private Map<Long, Integer> list and I'm using SJSAS 9 and NetBeans 5.5.
Thanks in advance,
Stefano

I'm also experiencing this problem.
I'm pretty sure the cause of this is your "Map<Long, Integer>" and my "List<Integer>".
Doesn't GlassFish implement this JPA specification?
I see the post is been unreplied for a month: Please, somebody help us!
Tks,
Raul Oliver

Missing EXIF Data on Export

Over the last few months I have developed quite a love/hate relationship with A3. It has so many great features, but at times they are over shadowed by slow performance and bugs. The most recent bug to drive me nuts is missing EXIF data, specifically lens model/serial number, flash exp. comp., and focus mode/distance. It doesn't matter how the file was exported, the aforementioned data disappears every time.
A quick forum/web search shows that I am not the only one experiencing this phenomenon, but I was unable to find any solutions. So I guess my question is, has anyone found a fix for this problem?

I share your views. A3 has a lot of great functions. But for this price I would expect to have full geotagger functionality i.e. not only positioning, but also direction inclination angle all kind of data my great Solmeta Geotagger Pro stores in the picture metadata.
Geosetter e free software on PC has all that so why is Apple not able to deliver the same package?

Missing OpenType Data

I am designing a web site for a company and they sent me the font files for Eurostile. The problem is that when I went to install them, FontBook advised me not to, and the specific error was that there was "Missing OpenType Data" and FontBook also warned me that installing the font could crash the system. Upon further investigation, I also discovered that the files are Windows TrueType, not Mac.
Is there anything I can do to remedy the situation?

Dug through FontBook and found that font was already installed on machine.

Records are Missing when we run Delta Load( FIGL-ACCOUNT ITEMS)

Hi,
Some records are missing when we run Delta load.
We have one generic data source on FAGLFLEXA table.
We select Field nm TIMESTAMP
TIME STAMP IS LOCAL.
upper limit is Blank
Lower limit is 1000.
we run this process chain every day.
we select delta settings is New status for changed records.
Please give me any idea why records are missing when we run deltas.
Thanks
Naik

Hi Anju,
Please ensure that you are following the below steps while Initilizing the application 13:
1. All the users in source system, must be locked.
2. Ensure that SMQ1 and RSA7 are having no data for application 13. Delete the application 13 datasource entries from RSA7.
3. Delete and refill the setup tables for application 13.
4. Run a INIT with data transfer load for the required datasources of application 13.
5. The Deltas can follow from the next day.
This will ensure that your deltas are fetching correct data. Note that, delta will pick up the same conditions on which the INIT load was run.
Please let me know if you need any more information.
Regards,
Pankaj

Help with DTP with Processing Mode No Data Transfer, Delta Status in Source

Hi, I am trying to test a Cube to Cube Extraction where I do a full DTP Extraction for a specific account to get the data I need and then a DTP Delta Init by using Processing Mode "No Data Transfer, Delta Status in Source".
When I do the DTP Delta init using Processing Mode "No Data" this is done in Dialog mode, but is taking an extrodinarily long time to run as it looks like it is going back through all of the source infocube requests to somehow determine the delta marker. The source infoCube does have a lot of requests, but I would think this would be a very quick process to set the marker.
Any ideas why this dtp init delta with no data would take soooo long?

Hi, Thanks for the information, but I see in the documentation that this type of proces is run in dialog mode. Could you point out where this process type would run in background only? Can anyone tell me why this would run so long?
No data transfer; delta status in source: fetched
With this processing mode you execute a delta without transferring data.
This is analogous to simulating the delta initialization with the InfoPackage.
*In this case you execute the DTP directly in the dialog. *

Generic Data Source - Delta Issue

HI,
I have created a generic delta source (transactions) with the following options: -
- using the extract structure
- enabled the generic delta with billing creation date as delta specific field
- calendar day selected
- safety interval upper limit = 1 calendar days
- additive delta
carried out the folling steps in BW
- Full update from above generic data source (all records)
- Init upload without data transfers (1 record)
- Delta enabled
Now, even though i am editing / modifying any record on my own extract strucutres record on R/3 side, it is not getting reflected in RSA7 (delta queue).
P.S:- I have modified one of the record from full update.
Ideally the modified record should be shown in RSA7, but i am not getting the same.
can you please help me
Thanks
Raj

yes,
I also thought the same point. But the records modified / edited yesterday are not appearing in today's delta. I am wondering why.
Is it anything to deal with FULL / INIT without deta transfer / DELTA procedure..
Regards
Rajiv

How can I go to a specific date in the future other than by clicking one month at a time?

Would like to go to a specific date several years from now and see what else I have scheduled (if any) or to see if that day is a holiday or even just to see what day of the week that day falls on. Can I do this in some way other than clicking on the NEXT MONTH button a gazillion times?
I am using Windows 7 (64-bit) on a Dell THX computer.
Thanks,
DannyBoy

tried clicking on the year in the calendar?

Missing export data in R/3

Hi,
I haven't setup customs management (i.e. not setup for proforma transfers from ECC) to GTS.
However, I get a message when creating billing document in ECC that missing export data even though billing doc is saved.
Do I need to do any config in ECC foreign trade
ANy idea?
Thanks,

As now you using GTS for Foreign Trade acitivity you need not to maintain any detail under Foreign Trade Configuration in Feeder system.
You will be getting this message because of the incompletion log schema activated under "Incompleteness Schemas for Foreign Trade Data" (Control Foreign Trade Data in MM and SD Documents). Deactivate those schema .
Kind Regards,
Sameer

Missing specific data in delta in 0CRM_SRV_IBASE_ATTR

Similar Messages

Maybe you are looking for