Missing standard extractors

Hi
I am working on a SAP BW project, where we are implementing Project Portfolio Management based reporting. More specific we are reporting staffing data from xRPM.
This runs on a separate system from the ECC system. Now, the PPM developers are integrating HR data from the ECC system into the PPM system (modifying the org. hierarchy). The modifications are performed in the standard transaction PPOME. Now, they want the modified data to be reflected in SAP BW.
My original approach was to use the standard data sources for 0EMPLOYEE and 0ORGUNIT in the PPM system. However, these are not available in the system. When looking in the "Activaiton of standard data sources (RSA5) and in table ROOSOURCE, I am not able to find the data sources.
When looking in RSA5 my top node is "BW_DATASOURCES" which contains a number of xRPM data sources, some related to CCMS and a bit more. In the ECC system my top node is SAP and below is a node "SAP-R/3", which contains all the "classic" data sources: GL, PCA, HR, SD etc. This node (together with the data sources) is NOT available in the PPM system.
Now, i compared the plugins (in SPAM) on the two systems. The ECC system has a lot more, but the PPM system has among others:  BI_CONT, SAP_BW and SAP_BI.
Any ideas what to do?
Cheers
Karsten

Hi Sven
Thanks for your reply.
1) Yes, the mentioned table is populated.
2) As far as I can see, the mentioned plugin is installed.
These are the installed plugins in the PPM system:
Component     Release     SP     Support Package
BI_CONT            703           16     SAPKIBIIQ6
CPRXRPM           500_702           4     SAPK-50004INCPRXRPM
PI_BASIS     702           6     SAPK-70206INPIBASIS
SAP_ABA            702           6     SAPKA70206
SAP_BASIS     702           6     SAPKB70206
SAP_BS_FND       702           4     SAPK-70204INSAPBSFND
SAP_BW          702           6     SAPKW70206
ST-A/PI          01M_BCO700     1     SAPKITAB7F
ST-PI            2008_1_700     3     SAPKITLRD3
VIRSANH             530_700            11     SAPK-53311INVIRSANH          
If i look at the (for me) relevant plugins in the the ECC system, they look like this.
PI_BASIS     701           6
SAP_ABA            701           6
SAP_BASIS     701           6
SAP_BS_FND       701           4
SAP_BW          701           6
ST-A/PI          01M_ECC700     1
ST-PI            2008_1_700     3
The only thing that stands out in my mind is the ST-A/PI.
Regards,
Karsten

Similar Messages

  • Is there any standard extractor for AFD provided by SAP?

    Hi.
    We are planning to implement SEM-BCS ? From this forum and  SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't  find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
    I think I missed good integration point SAP provided.
    Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
    Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?

    The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
    So, there is no standard extractors for AFD.
    IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
    IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
    CoI - the most of data for it is accessible in ECC, even in RFD.
    So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data.

  • Some fields of standard extractor 2LIS_17_I3HDR are lost in the structure

    Hi experts,
    I need help with a case of a standard extractor, the 2LIS_17_I3HDR has selected some fields like GEWRK, GSTRP, GLTRP (when I saw it in the tx. LBWE) but this fields are not defined in the structure of the extractor, Anyone know why this occurs?. I send you an example of the case, thanks for any help that you can give me.

    Hi Rosmar,
    Have your system was upgraded previously?
    This is the problem faced by many and SAP has provided a SAP note for this.
    2042469 - 2LIS_17_I3HDR: Fields are missing after upgrade
    This note explains exactly the reason of missing fields and how to retrive that.
    Even if this note do not apply to your system (valid for SAP_APPL 605, 606, 616, 617) it is worth trying in your Dev system and check if it works.
    Thanks
    Amit

  • Standard extractor for ECC table BFOD_A

    Dear Gurus,
    Do we have any standard extractor delivered by sap to extract data from ECC table "BFOD_A".
    Also this table does not have any timestamp field..so in case we create generic datasource on this table how to do we extract delta.
    Thanks,
    Sandeep

    As far as I know there is no standard extractors for this table. You are trying to get AR by Profit Center information? The FI consultant had tried adding a timestamp field but unfortunately the customized program is not 100% correct (as we have missing data in delta). So we just created a generic extractor on this table and perform weekly full load until the customized program got fix.

  • Standard Extractor for Warehouse Transfer Orders

    Hello Experts.  Does anyone know if there a standard extractor for warehouse transfer orders (Tables LTAP/LTAK).
    Thank you!

    Hi Martin,
    Thank you for this information.  However, I cannot find these extractors when I execute RSA5.  Does this mean that these are not available in our version?  It seems to me that this should be available to us because our SAP Component Version is SAP EHP 1 for SAP NetWeaver 7.0 and this is what I see in the Business Content Documentation.  Are we missing something?  Thanks for your help.

  • How to find table name for the fields from Standard Extractor in CRM system

    How to find table name of fields from the standard extractor in CRM system ?
    e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
    Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • How to enhance Standard Extractor for 0CUSTOMER_ATTR

    Hi,
    I need to enhance the standard extractor of 0CUSTOMER_ATTR in order to populate the newly added attributes.
    I have few questions:-
    1) Will there be any impact of manually adding attributes to 0CUSTOMER on the data flow/where used list of 0CUSTOMER.
    2) In order to get the master data for newly added attributes we will need to enhance the extractor. Could you let me know the entire process of enhancing the standard extractor.
    3) Will it be safe to make a copy of 0CUSTOMER as ZCUSTOMER, add the new attributes in ZCUSTOMER and use ZCUSTOMER for our requirement. In this case also we will need to enhance the extractor.
    Your inputs will be helpful.
    Thanks,
    Naveen Kr. Choudhary

    1) Will there be any impact of manually adding attributes to 0CUSTOMER on the data flow/where used list of 0CUSTOMER.
    No there will not be any impact for the where used list of 0CUSTOMER info object, there will be effect once the enhanced data source is replicated to BI side.
    2) In order to get the master data for newly added attributes we will need to enhance the extractor. Could you let me know the entire process of enhancing the standard extractor.
    SE11 --> create the Structure
    Tcode: RSA6 -> Double click on the Data source --> Now in the DS:customer version screen you can see the extract structure name --> double click on it -->Next you will find an option of Append Structure button --> click on it -->
    Add the necessary field's in the Append Structure with Component Type:. Before you exit, make sure that you activate the
    structure by clicking on the activate button.
    Next
    -->You need to confirm that the Added filed has been added to the DataSource and that it will be available to BW. When you go  back at the Postprocess Datasource and Hierarchy screen(RSA6), select the same DataSource again and press the Change DataSource button .
    Check for the filed that you had appended, it will be appeared at the bottom of the extract structure.
    Once this is done now the appended fileds are ready in DS, now we need to populate the data from the corresponding tables.
    For this Select the Data source 0customer_attr --> click on Function enhancement --> enter the project name and next enter the Enhancement RSAP0002 This enhancement has four components that are specific to each of the four types of R/3
    DataSources:
    Transaction data EXIT_SAPLRSAP_001
    Master data attributes EXIT_SAPLRSAP_002
    Master data texts EXIT_SAPLRSAP_003
    Master data hierarchies EXIT_SAPLRSAP_004
    With these four components , any R/3 DataSource can be enhanced suing the above 4 Function module. In this case, you are enhancing a Master data DataSource, so you only need EXIT_SAPLRSAP_002 .
    Next we need ABAP developer in order to enahance the DS and write the logic to populate the values to the filed from the source table.
    once this is done save the code and activate it.
    Next fill the set up tables and  Goto RSA3 tcode check the data source and check for the fileds that were appened are populated with the values or not.
    (for more detailed steps our friend Chowdary has send u the links go through them)
    3) Will it be safe to make a copy of 0CUSTOMER as ZCUSTOMER, add the new attributes in ZCUSTOMER and use ZCUSTOMER for our requirement. In this case also we will need to enhance the extractor.
    I dont think there is a need for creating a new ZCUSTOMER , you can use the standard one.
    Edited by: prashanthk on Aug 13, 2010 9:02 AM

  • How to improve the performance of Standard Extractors

    Hi All,
    Can you please let me know how to monitor the performance of Standard Extractors. For one of the extractor which have 350K records in source, it is taking 4hrs to load to BI.
    I want to know which part of the program is taking more time.
    Thanks in Advance
    RK

    No, that exception is thrown when the underlying
    socket (tcp/ip) implementation cannot reserve buffer
    space for new sockets afaik. I get it on windows
    machines when the concurrent connection load reaches
    17-18k connections. I do believe it's configurable
    though.And what happens if your max server load is 7-8 connections an hour and you never close the connections?

  • Standard extractor for RBKP:Document Header: Invoice Receipt?

    Hi gurus,
    I need to extract from the table RBKP. Is there a standard extractor for this table? If not, what table joins would be best to create a generic extractor?
    Thanks !
    Chirayu

    Hi Chris,
    Check to see if this would be useful:
    http://help.sap.com/saphelp_nw70/helpdata/en/57/dad06449114814919000e27dfb255e/content.htm
    Hope this helps...

  • BUG IN SAP STANDARD EXTRACTOR

    Hi Experts,
    We are using the SAP Standard datasource 2LIS_11_V_SSL for populating the Service Level DSO.
    The DSO has Sales order number, item number and schedule line number as primary keys.
    The standard extractor is fetching incorrect delivery number for a combination of a order number, item number
    and schedule line number.
    For Example :
    1. Sales Order Number 42739 has two delivery numbers 80020920 and 80027934.
    2. The combination of Sales order number 42739, with item number 10 and schedule line 2 have been delivered using
       delivery number 80027934.
    3. But the SAP Standard extractor is displaying ( in RSA3 ) the above combination of order, item and schedule line
       with delivery number 80020920.
    Please consider this scenario and suggest some measures to fix or debug this issue with the standard extractor.
    Thanks,
    Uday

    Reported to SAP Global Support and found to be error in SAP standard DS 2LIS_11_V_SSL for SAP BI AFS Versions.

  • Extraction from Standard Extractors in SAP-BW

    Hi
    How i can extracts data from standard extractors from R3 system to  SAP-BW
    like 0CUSTOMER_ATTR is standard extractors.
    Regards
    Atul
    Edited by: AtulMohan Mishra on Nov 4, 2010 1:08 PM

    There are standard steps for this...
    1.Activate Dasasource in R/3 (RSA5)
    2. Replicate DataSource in BW
    3. Create Update rule / Transformations
    4. Create Infopackages / DTP's and load data.
    You can get details in any BW/BI book.
    SSS

  • Missing Standards from CDM SGL V6

    I have been reviewing the CDM SGL Volume 4 document and I have found a number of missing standards that I would like explained or resolved please.
    OMS-30862 was replaced by OMS-30830 but I can't find a reference for this either in the current standards or as having been removed?
    OMS-45021 & OMS-45022 was replaced by OMS-61557 but I can't find a reference for this either in the current standards or as having been removed?
    Can anyone from Oracle Help? Has anyone found anymore?
    Is this the correct forum for CDM questions?
    Mark

    I can only find the reference from OMS-45021 & OMS-45022 to OMS-61557 and not the other way around, if that is what you mean.
    OMS-45021:
    Name a database trigger using the convention [application code]_[table alias]_(B/A)(R/S)
    Reason
    Included in new std. OMS-61557
    OMS-45022:
    Extend the trigger name with I, U, or D if the trigger is specified specially on Insert, Update, or Delete.
    Reason
    Included in new std. OMS-61557
    One might have expected OMS-61557 to be mentioned as a new standard. I can't find out anymore why it's not, but one reason might be that it was added in a previous release of CDM, from which we forgot to remove OMS-45021 & OMS-45022.
    Jan Kettenis

  • Standard extractors for pricing conditons in CRM

    HI Guys,
    I would like to extract pricing conditions from CRM and wondering if there is a standard extractor for that.
    thanks

    Hi Bhat,
    There is no standard CRM datasource to extract pricing information. I have attached a document to this message with a suggestion on how you might create your own extractor to load the pricing information, see the document pricingconditionssuggestion.DOC. Please note that this is only a suggestion and there is no guarantee that it will work
    or meet your requirements. If you implement the suggestion though please let us know the results.
    Best Regards,
    Des

  • Standard extractor for crm

    Hi everybody,
    What are the usually used standard extractor for CRM especially TPM and Chanel Management. Can somebody give me a idea about this submodule (TPM, CM).

    Chanel Management - 0CRM_CHM_CLASS_ATTR
    TPM - 0CP_UPLI_PARA
    More:
    http://help.sap.com/saphelp_nw70/helpdata/en/4a/6321849a710a4fa4a2759101ed4932/content.htm
    Regards,
    DL

  • Table for checking the appended fields in the standard extractor

    Hello,
    Please let me know the table name for checking the appended fields in the standard extractor.
    Thanks in advance

    Hello,
    From Rsa6 , goto your extractor from there you may get the name of your strucutre
    Go to DD03L and enter this name
    And you get to see all the fields there..
    waiting for your feedback.
    Regards
    Nitin Bhatia

Maybe you are looking for