Missing Storage after using Migration Assistant

So I used migration assistant to move my data to my new Macbook pro. Before beginning the migration, I saved a folder full of old pictures and movies on my new computer's desktop. At the completion of the migration, the folder was gone although when I checked my storage space I found that it was much lower than I expected. I migrated 170gb, the new mac has 330gb of space used. The difference is roughly the size of the folder I lost on the desktop. I can't find the folder but its still taking up space.
Whats going on? Can I retreive the folder I lost? How can I free up the space I don't seem to be using.

When you use Migration assistant, it creates another User account. Look there.

Similar Messages

  • Missing Fonts after using Migration Assistant

    I used the Migration Assistant to Migrate from one Mac to Another and now Indesign has missing fonts. I re-installed Indesign and it's still not working.
    I am getting the following error - Missing Fonts The Doument "document.file" are not currently available on your system. The text will use a substitute font until the original font becomes available.
    One of the font missing is ITC New Baskerville T1. But it's not only T1 fonts that are missing. I check with Font Book to make sure that this font is in there and it is. I cleared the font cache and checked adobe's documentation but I can't seem to figure this one out.
    http://kb.adobe.com/selfservice/viewContent.do?externalId=327791
    http://kb.adobe.com/selfservice/viewContent.do?externalId=328542
    Please help !

    Most Adobe products seem to install fonts in 'non-standard' places. So it is annoying but not a surprise that Migration Assistant didn't find them. It is odd that reinstalling InDesign didn't fix it. Try restarting while holding down the Shift key, that will boot you into Safe Mode which, among other things, flushes the font caches. Maybe it is just confused!

  • Mail not working after using migration assistant - what am I missing?

    Mail not working after using migration assistant - what am I missing?

    The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The  MAILBOXES category can't be hidden.
    In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

  • Lost list of my wifi networks after using migration assistant / time machine

    After using migration assistant / time machine to set up my new Mac I now miss the list of stored preferred Wlan/WiFi networks. So the passwords of wireless networks I. Used in the past are all gone.
    Why is time machine not putting those on my new Mac as it does with many other settings?
    How can I manually grab this list from my old Mac and out it on the new machine?
    Will I find that time machine missed some other lists and settings as well?
    Thanks for help.

    I've been working through this procedure this week. It's pretty good, and when it works it appears to work quite well, but there's still some bumps in the road:
    (1) Once you've migrated, Time Machine itself seems to be a little confused and future backups may fail. You might have to start again by changing to a new Time Machine disk on your new laptop. You may lose your older backups, it's not yet clear to me.
    (2) You can't restore from a previous backup during the migration, only the most recent one. (You can restore from an older backup using tools on the install CD if you need to.) I suspect this won't be an issue for you.
    (3) Migration Assistant once you've logged in a Migration Assistant while you're starting up a new machine seem to work slightly differently. For example, sometimes the newest copy of the applications in your Applications folder (say, iMovie) is preserved, sometimes it makes an exact restore of the old Applications folder even if it's an older version of the application.
    Overall it's been a pretty good experience, and what you want to do does work, but be prepared for the possibility of some issues. I tried this back in 10.5.0 a few months ago and had a lot of problems, things seem better now under 10.5.2.
    - Ert

  • After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

    After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

    using migration assistant is problematic.
    at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
    cleaner:  Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    installation files:
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • After using migration assistant to a new Mac 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

    After using migration assistant to my new MacBook Retina 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

    See if this previous discussion/link to microsoft support helps
    Re: There is a problem with the Outlook database.  Your database could not be rebuilt. [-18000]

  • HT4889 After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?

    After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
    13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13

    What is the exact name of the application you're trying to launch? Is it in the Applications folder?

  • After using migration assistant 183gb other storage?(Help)

    I just purchased a new macbook pro with retina, comming from a mid 2010 macbook i used migration assistant to move over my information.
    After using the migration assistant i have 183gb used in my other catagory in my storage.
    How do i get rid of it?
    Will i go away by itself, once time machine backs up?
    If i do a full system restore, to get rid of the issue what is the best way to migrate my information over. Considering i have a time machine backup of my old mac also.

  • Desktop is missing after using migration assistant

    I just finished installing snow leopard after wiping my hard drive. I logged onto the guest account to use migration assistant and keep the same username. After doing so, I logged back onto my account. I can no longer drag anything onto the desktop. I tried copying the desktop folder from the deleted users folder that migration assistant created, but it doesn't affect the desktop whatsoever. How can I get my desktop back?

    Wipe and install Snow Leopard again and this time use the Setup Assistant instead.
    Use a Firewire cable (800 to 400 adapter if required) and hold T boot the old Mac into Firewire Target Disk Mode and then connect the cable when the Mac reboots after you just fresh installed Snow Leopard.
    This way only one account gets transferred like you intended.
    https://discussions.apple.com/message/16276201#16276201

  • How to access Time Machine backups after using migration assistant?

    Can someone please help me with a TM issue.
    My HD died so I fitted a new one.  I figured that I would do a clean install rather than use TM to bring across a whole bunch of 5 year old junk and Aps that all broke after the Leopard -Snow Leopard -Lion -Mountain Lion upgrades.
    Installed 10.8.2 Mountain Lion, no issues.  Then used TM to drag and drop all the Applications I actually wanted, still good.  Then used Migration assistant to bring in the remainder of the settings, documents, mail etc.  For some reason you cannot migrate to the current default user so you have to create a new user profile which I did.  New profile was great so I deleted the other profile created at install that was pretty much blank.
    At this stage everything looks awesome but I noticed a video clip was missing in a Final Cut project so I went back into TM to retrieve it.  Now, all the documents in my old user profile in TM have a little no entry symbol on them and I do not have permission to look at those files.
    It looks as though I am now being treated as someone else on a different machine and no doubt TM will continue to work from this point on but how do I tell it that there is just one user on this machine and I want access to all the historic backups too?
    Any advice will be gratefully received.

    Many thanks for your response Mende,
    I am trying to specifically NOT do a full TM restore because I have some issues with some programs that I cannot delete.  I wanted a fresh start but from what I understand the TM will bring back everything as it was, including all the corrupt system files.  Fixing the TM permissions would be the preferable option.
    (I attempted to make a windows partition on my system once, thinking it would make some sort of clever fake-windows desktop supported by Mac coding. It actually wanted me to do a full windows 7 install on the partition with windows install disks so I cancelled the process.  Because it was a partial install I have not been able to uninstall the modifications and my system was crashing regularly due to some sort of stray code).
    Just out of interest, if your OSX install is perfectly good, will TM use that or will it still take your OSX from the TM backup?
    Apart from that one stray file, my system is now super clean and faster than ever... but maybe there are still some things missing that I haven't noticed yet.

  • Some of my applications and/or folders got corrupted after using Migration Assistant

    Hello,
    Had an iMac with Snow Leopard installed (1 single admin user).
    Also had a Mac Mini with Snow Leopard installed (1 single admin user).
    Got everything transfered to a single brand new MacMini with Lion pre-installed using the following method:
    - Started the new Mac Mini from scratch and used Migration Assistant during setup process to import ALL data from old MacMini (user, applications, settings and other files) using ethernet connection.
    - This went perfectly well with 1 or 2 minor errors regarding 1 or 2 startup items but resolved with erasing and re-installing them.
    - Applied all available Software Updates to get an updated version of Lion (10.7.5)
    - Then launched Migration Assistant from the new Mac Mini to import ALL data from iMac (user, applications, settings and other files)
    - This went well as I got the same message than previous transfer (all data was transferred OK)
    - Also got another message saying some X folder was not compatible with targeted system and same with some CHUD folder.
    I finally got my 2 admin users gathered onto the single new Mac Mini in 2 separate admin user sessions.
    If an app was already transferred from the old Mini but also installed on the iMac it did not get transferred from the iMac thus keeping the Mac Mini version.
    For such apps I have permissions issues and some of the folders used by the 2 different admin users such as /Movies or /Documents are locked depending on which user session is opened.
    I tried repairing permissionsusing Disk Utility but with no success.
    I also tried to delete and re-install these applications but it did not work.
    Last chance was to grant full access attributes to the related folders via their information panel or System Preferences (User & Groups tab) but it did not work either.
    Could somebody please explain the background for this issue and how could I solve it?
    I am thinking of re-installing Lion from scratch, transfer the old Mac Mini again (ALL data) and then import iMac user but only USER data (not applications and settings). Would it work?
    Thanks for any help you could provide,
    François

    I was finally able to fix this by using a couple of preference management utilities. Either I missed a key preference file for each app, or there are some hidden preference files, but when I used the prefence management utitilities (such as Preferntial Treatment, PrefEdit, Defaulter, or PlistEdit Pro) I was able to look at the prefs for Firefox and Photoshop CS2 and see where the hostname for the my old G4 was listed. (in the case of Photoshop CS2 it was actually in the list of recently opened files!! I should have noticed that from within Photoshop)
    Now that I've removed those entries from preferences both Photoshop and Firefox run without prompting that the old G4 had to mounted.
    oh, also... I found that for both Photoshop & Firefox I could actually get them to work without mounting the old G4's root volume - it just took clicking past the pop-ups (about 10 of them for each app) and waiting a long time as it searched around for the next one (maybe about 10 minutes total ... normally I don't have time to waste like that, but I got curious and made the time).
    Thank you for your suggestions. as I had suspected, Migration Assistant moved some preferences from the old G4 that had it's hostname embedded and for some reason the apps weren't clearing them out when they were launched on the new machine (again, odd since I didn't have Migration Assistant move the apps from the old G4 to the new G5 - I installed each app on the G5 as a new install (aka: a "clean install") to avoid just this type of problem).
    My real thanks are to the authors of the above mentioned preference management utilities.
    Quad Core PowerMac G5 Mac OS X (10.4.3)

  • Cannot use Creative Cloud in new Mac after using Migration Assistant

    I used Migration Assistant to set up my new Mac (new computer is a Retina MacBookPro; so was old computer). I could not open any of my CC apps. When I open Creative Cloud Desktop App it is completely blank (no tabs for Apps, Fonts, Files, etc. -- No means of installing or updating apps). I uninstalled Creative Cloud and reinstalled (several times) but got the same results. I have also deleted all the Application Folders for CC apps that cam ever with Migration Assistant.
    Any ideas?
    Thanks

    Mac migration does not always work with Cloud programs
    Uninstall... run the Cleaner... Restart your computer... Reinstall
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html
    -using the cleaner after uninstalling and before reinstalling will usually help
    -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • Can't Print after using Migration Assistant, more

    Hi,
    I recently used Migration Assistant to transfer all of my apps, files, data, ... from my Power PC G5 1.8mhz running 10.4.11 to my new-ish iMac 2.16 Ghz Intel Core 2 Duo with 10.6.8.  It seems like everything worked but I have a few issues.
    1.  I can't print anything now where as before I could on the iMac.  I get a printer error message
    Error: /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr failed
    2.  I can access all of the old files of the G5 but I have to log out of the iMac user to one of my old user accounts.  I want to get all of those files into my iMac account and delete those old user accounts.  I especiallly want to get the old photos into my iMac user account's iPhoto.
    Thanks for any help.  I'm feeling like an imbecile right about now.  ;-)
    -Don

    You should not delete files on the new machine after running MA. The only files I would recommend deleting would be data files you no longer need, however to be safe use Time Machine to back up your machine. One never knows when you may need something again.
    Regards,
    Roger

  • Program windows too large after using migration assistant

    This seems like a silly question. I just got my MacBook for Christmas and I used Migration Assistant to transfer everything from my iMac to the MacBook. It worked great except that the sizes of the program windows remained the same as well, and they are too big on this 13" screen for me to access things that are way down on the bottom of the window. I can't get a hold of the corner tab that allows you to resize the window manually because it is off the bottom of the screen. I did try minimizing/moving the task bar from the bottom of the screen, but the windows are still too big. I discovered the problem in iTunes, but I suspect it is universal. I'd appreciate any help you can offer! Thanks.

    to doc m
    I was having problems with my photo booth, when i'd open it up i could only see half of the pics that I had already taken. I couldn't delete them or anything. After reading what you wrote it had dawned on me, maybe it could have been the screen resolution. I followed your steps and now I can delete the pics I didn't want & I can also see the full photo booth thingy [:
    even thou I didn't ask a question, you answered mine & thank you very much [:

  • I cannot log into user account with old password after using migration assistant.

    I used Migration Assistant to move only my Settings and Users from my Power PC (User name RLE 5) to my Mac Pro.  Because of what I have read in these forums I did not migrate applications or and files/folders. I will do that manually.  After migrating I tried logging in to my user account RLE 5 on my Mac Pro, but it is telling me I am using the wrong password.  I used the same password I used on my Power PC, but with no luck.  On my Mac Pro I went into System Preferences>Accounts>RLE 5 account and changed the password.  I then rebooted and tried again.  No luck.
    Can somebody help me with this problem?
    Thank you.

    What you propose would not solve the problem I am having.  I must not have been clear about it.  So I will elaborate. 
    I have a Power PC with 10.5.8.  The admin user account name is RLE 5.  I need a password to log into my root user account on my Power PC. 
    Then I bought a used Mac Pro with a clean install of 10.7.5 and no password set up yet for my admin user account.  The admin user account name is Mac Pro.  When I turn on the computer it opens to my admin user account where I have access to everything. 
    I used Migrations Assistant to move my Settings and Users from my Power PC to my Mac Pro.  That seemed to to successfully. 
    So I now have four users on my Mac Pro:  RLE 5 (the admin user from my Power PC with the password), Mac Pro (my admin user which does not require a password), and two guest user accounts.
    I turn on my Mac Pro and it opens to my Mac Pro admin user account.  I don't need to sign in.  No problem. 
    I log out of Mac Pro.  On my screen are the four user accounts.  I click on RLE 5 (which was my admin user account on my Power PC that I migrated over to my Mac Pro) to log into that account and it asks me for a password.  I type in the password I used for my Power PC.  It keeps telling me it is the incorrect password.
    I cannot log into my user account RLE 5 on the Mac Pro.  I am being told I have the incorrect password. I've gone to System Preferences>Accounts and changed the password.  It doesn't make a difference. 
    Also I cannot log into the Guest User account that migrated from the Power PC to the Mac Pro for the same reason.  I have also tried to change the password for that Guest User account also but with no luck. 
    Another interesting thing has happened.  I decided to give my Mac Pro admin user account a password by going to System Preferences>Accounts.  But when I do a test to sign into my admin user account Mac Pro it tells me it is the wrong password.  Luckily I can reboot the computer and it opens to my Mac Pro user without asking for a password.  But if I log out of Mac Pro and try to then sign back in with the password it tells me it is the incorrect password.
    Any suggestions would be appreciated.

Maybe you are looking for

  • Mapping a message in different types of messages depending field value

    Hi gurus! I need your help!, I need to create a scenario where I receive a message with a JMS adapter, for which I define an outbound service interface type, but depending on the value of a field (interface) to map in order to create different servic

  • Mto strategy 40 - planned order generation problem

    i have an fg, which is assigned to strategy 40. sales orders are created for that fg. however, when i run my mrp, tcode MD04 shows that the planned order generated for the FG is make to stock. how do i change this to make to order?

  • Flash crashes on movie export?

    I am having a huge problem with Flash CS3. Every time, ( and I DO mean every time) I try to export a movie in swf format, Flash crashes. I'm not quite sure what the problem is but it's duplicatable each time. I have tried uninstalling it and reinstal

  • Apple, please fix safari random crash and tab auto refresh

    Apple, are those issues ever going to get fixed? They destroyed iOS 7's usability and the latest 7.1 beta doesnt seem to address either. 1) Safari randomly crashes -  happens multiple times a day. Sometimes opening new pages, sometimes scrolling thro

  • Bridge ACR Conversions Far Superior to LightRoom or Dr. Browns 123 Process?

    I use the above apps constantly. Just did a test of bringing out a Canon RAW file to PSD from Bridge CS3 manually with ACR, doing it from Bridge using Dr. Browns 1-2-3 Process automator and doing it using the conversion automator within LR. Hands dow