Missing Storage Location

I am using SRM7
The issue is in Ext Attr for Org Str.
I ran the report BBP_LOCATIONS_GET_ALL to transfer plants from Backend.
I could maintain the plant in Org str (Ext Attr --> Locations).
However when I select the Storage Location, SRM does not find any Storage Location.
How can transfer SLOC from R3 or am I missing something else?

Storage location replication problem
see Ivan comments

Similar Messages

Issue Storage Location in Components details Subcontracting PO

Hi all
I need to implement this process in SAP:
I have to send material X, from storage location B 'broken', to my supplier for repairing. After He has repaired it I post good recipe of material X in the storage location A 'adjusted'.
I plan material X through MRP at plant level only for storage location A.
In the material master I've set procurement type 'F' and Special Procurement '30'.
I created a recursive BOM for material X where I entered, for component X, B as issue storage location.
In this way MRP run (with '1' as value of 'Create PR' parameter) creates subcontracting PR with X as material to buy and X as component to send to vendor, but in the detail of component I have the storage location field kept empty.
This for me is a problem.
In fact when I create PO from this PR automatically through ME59 transaction, the System creates a requirement at plant level for component X.
But this requirement is for broken material and has to be covered by stock in storage location B.
I know that is not easy to understand all the details of this process, even due to my english, but I hope someone can help my.
Please if you need a clear up, ask me.
Thanks for your help
Yours faithfully
Paolo Verderio

Hi Paolo,
don't worry. Your explanation is well understandable.
I cannot advise how to fix the problem with the missing storage location. I just have some doubts that it is the right approach to distinguish between an boken and a repaired material by storage location. Even for stock valuation there is certainly a difference between both, that you can't make transparent by storage location, and also if you look at your available stocks.
I would recommend to have either different materials or different valuation types. I have to confess that I am not sure that valuation types would help for your subcontracting PO.
best regards,
Udo

How to set storage location in iMovie 10?

iMovie refuses to import my video files and instead gives the following error message: "No storage location set: Cannot start ingest because there is not storage location set. Please set one under Storage in Preferences and try again." However, when I select iMovie Preferences, there are only two possible commands (Clip: Apply slow-motion automatically) and (Theater: Automatically upload content to iCloud [grayed out]) neither of which appear particularly helpful in this context. In any case, when I import single clips these are "automatically" stored in updated projects, so why will this not work more generally? Many thanks

I've been able to store the contents of my camcorder on the Mac's HD. I've tried importing the clips from there and get the same result, whether I try to import one or several clips at once, it replies with the same error message as to the missing storage location/instructions. Interestingly, it will nonetheless import the first (or only) one of the clips that I highlight on the import screen.
When you suggest dragging the files, from where do you mean? The clips per se don't appear in the finder, but only on the import page. The finder show only various fragmented files that aren't complete clips (eg. separate video and index, even sound files), which is too much of a pain to deal with...
It's true that my original iMovie library was created from an upgrade, but I have since deleted the contents and attempted to reload the clips. Are you suggesting deleting the library completely and starting again, or should I just try creating another event and using that? Don't see why that shoudl work better than "updated projects", but perhaps it's worth a try...
Thanks again

How to add storage location in the MBBS transaction out put

Hi experts,
I need to add the storage location in the MBBS Transaction report
out put . what will be the procedure. Is there any standard settings or else I have to copy the program. Plz help me.
Thanks&Regards,
Srinivasa rao.V

I've been able to store the contents of my camcorder on the Mac's HD. I've tried importing the clips from there and get the same result, whether I try to import one or several clips at once, it replies with the same error message as to the missing storage location/instructions. Interestingly, it will nonetheless import the first (or only) one of the clips that I highlight on the import screen.
When you suggest dragging the files, from where do you mean? The clips per se don't appear in the finder, but only on the import page. The finder show only various fragmented files that aren't complete clips (eg. separate video and index, even sound files), which is too much of a pain to deal with...
It's true that my original iMovie library was created from an upgrade, but I have since deleted the contents and attempted to reload the clips. Are you suggesting deleting the library completely and starting again, or should I just try creating another event and using that? Don't see why that shoudl work better than "updated projects", but perhaps it's worth a try...
Thanks again

Create assign Storage location into Existence Material

Dear Expert in Forums,
I missed to input Storage location in one Existence Material master. Is there any way to assign missing storage location in material master.
Pls help me.
Thanks
Bishnu
02/04

hi there
You can use the transation MM01 for extend the material to an storage location, just go to mm01 give your material code go for organization elements mention your plant where you have already created the material and give the storage location in which you want to extend your material, after view selection when you will press enter the system will issue the message that material already exists and will be extended for say X storage location.
Even you can extend your material to an storage location using transaction MMSC by using materal code and plant combination.
Reward if usefull
Regards
Sujoy

Storage location missing in Inbound delivery

Hi ,
When I am getting the ASN or confirmation for my purchase order.
automatically Inbound delivery is getting created.
But here the problem is missing the storage location in inbound delivery.
I maintained the storage location determination (with situation) setup.
could you please help me.

The entry in OMB2 indicates that automatic creation of storage location data in the material master record at the time of the <b>first goods receipt</b> is allowed.
As well the storage location data is only created automatically if the quantity is posted to the "normal" storage location stock. If you have goods movements to special stock (for example, to sales order stock), the data is not created.
To my knowledge the PO generally does not have storage locations,while creating inbound delivery (manually or automatically) storage locations are copied from the material master. So, also check what S.loc. your material master has for the materials you are creating inbound deliveries.
Regards,
PATHIK

Missing parts and production storage location

Can the production storage location in the material master for a component on a BOM be set to blank to pull in all inventory in the plant when calculating missing parts in a production order? I am finding that the blank production storage location is NOT pulling in all inventory in all storage locations; I honestly think that is how it should work but would like to see what others think or have run into. Thank you very much!

Hi Judith,
This can be done by system to carried out Avilability check plant level instead of storage location level. For that plz do the settings as suggested by our member.
Check the "No.Stor.Loc.Insp" in OPJJ for checking group and Checking rule combination and assign the same checking group to material at MRP view.
Donot Assign storage location for components in material Master and BOM item.
Please try anf comeback
regards
pradeep

Storage location missing or incorrect Message no. L3432

Hi,
Previously the item we want to zero-in is under warehouse number WH1 under let's say plant 1000-storage location 1010. However this plant 1000 storage location 1010 was later on assigned to a new warehouse number WH2. During the migration period, this item was forgotten to be moved in the system from WH1 to WH2. Hence, we are trying to correct the quantity in WH1 now. However, when we try to post the count using LI11N, it is giving me Storage location missing or incorrect. How do we solve this?
If you have other suggestion on how to correct the quantity in WH1, please let me know. Thank you.

Hi Jackie,
Could you please perform the below steps?
1) Transaction SE51
Program SAPML03T, Screen number 0101 -> Element list -> Change
2) Select Tabstrip 'Special attr.', position the cursor on field LTAP-LGORT
and mark 'SET' parameter' and 'GET parameter'. Finally generate the screen.
Check this settings in your system and re-test.
BR,
Enrique

Storage location field missing while doing GR with PO number

When I receive goods from a PO, the storage location field missing from MIGO with 101. Material been extended with storage location and entered in PO. But sloc field totally greying out while I receive goods with PO.
I tried other way to receive goods , but storage location disappears when I save it.
MMBE shows stock as on order before reciept , after I post goods, material document created but stock disappears. Not even in the plant.
Can anyone help , please?

<i>The following from other message thread solved my problem....</i>
Stephen Birchall
Posts: 1,095
Questions: 1
Registered: 3/27/07
Forum points: 1,566
   Re: Material Classifications and Purchasing cycle
Posted: Apr 23, 2007 9:26 AM    in response to: Dushyant C Koth...       Reply      E-mail this post
Hi,
You create the material in MM01 and select the non-valuated stock material type.
When you create a PO for this material the system will ask you to enter an account assignment category (such as K for cost centre etc.) Indicate the GL etc that you want the costs to be posted to (Stationery, office supploes etc.).
When the items are received, post the GR as normal (with MIGO). At GR the total value of the items will be posted to the correct financial accounts and the stock quantities will be updated.
Then when you have consumed anything you post a goods issue (MB1A or MIGO) and this does not post anything to the financial accounts (it was all posted at GR) but it does reduce the stock figures.
This process is ideal for ANY low value / high volume items, because the stock is managed correctly but you do not have many hundreds of tiny financial posting as each low value item is consumed.
Steve B

Storage location missing in purchase order

Hi all, I'm struggling to find why the storage location is not copied from purchase requisition to purchase order using ME21n.
Further this happens only for one buyer, the same PR's if converted in PO by other buyers, move correctly storage locations to PO.
Only for one buyer the storage location comes up blank and he has to populate manually the field.
I've checked his SAP profile and it's perfectly the same of all other buyers. Also he hasn't any particular personal settings in his ME21n.
Apparently there aren't reason why it should happen but it does.
Also searching on the web I haven't found any documentation or any other SAPer with the same issue
Can someone give me some suggestion?
thanks
Luca

There are 3 reasons for this issue...
1. Authorization
You have said that, all authorizations are same for this buyer compare with other.
2. Personal settings in me21n.
You have also said that there are no issues with the personal settings..
3. User parameter..
Check user parameter from su01 tcode. Is it showing same as other users..
Also check again the personal settings, is there tick the option "Always propose" for storage location in me21n..

Storage location field missed in (migo) details data ,where tab

Hi
I am try ing for free goods
I created new document type (copy from subcont document type..)
and create new number range for this doc type and assign to this this document type and assign item category L to this new document type
i defined account assignmet cat with invoce checkbox tick removed
and assing this account assignment cat to item cat L..
i have done allabove settins in spro
now i am going to ME21N
WHEN I am crating subcon P.O system bydefault goods free taken ..
but when i was doing GR (MIGO)for this P.O ..system does not show the storage location in where tab (migo)...but document is posted .. stock can be shown at plant level ..if i go storage location ..stock does not show
I think u have understood what i have done..pls guide me ..where i did mistake
regadrs
sesidhar
regards
sesidhar

Hi
1. Create Subcon P.O for material A0001X500G qty 100 ..Vender dummy. In P.O enter the Account assignment (costumed ...) item cat L... System automatically taken FREE tick mark...And net price value zero.. ..Saved p.o
2. Transferposting MBIB movtype 541 materials provided to subcon dummy vendor. Post the document
3. Then GR for this .P.O...Movtype 101 for P.O material and 543 movtyp for consumed material. Here in where tab storloc not displayed ...this 101 movtype material where it goes...
Material A0001X500G stock is increased and A00020X500G stock is decreased... And I want accounting documents for GR 101 movt material and consumption material 543 materials...
Service charge free ...I think ur under stand my problem...this we are called PACKCONVERSION...Through Subcon P.O....Pls..Guide me...Can we follow this procedure or not...If not...Pls tell another solution for this scenario
regards
sesidhar

MF60 - Replenishment storage location missing !! help

Hello friends,
I am running pull list in t-mf60 , when I execute the data in automatic mode in global setting, the Replenishment storage location is coming blank for all material codes even some material have stock in main store location . Also I have assigned main store location in SPRO.
Kindly help
Regards
sam

Dear Sam,
Generally replenishment Storage location field will be seen with filled values if Warehouse Management is
actived and in the other normal cases we have to fill the repl.storage location manually before staging the
materials.
Regards
Mangalraj.S

MRP Run in an excluded Storage Location

Hello all. I have this situation.
I have material X with two storage locations: SL01 and SL02. Storage location SL01 has 15 pieces and SL02 has 5 pieces. In MD04, I can see a total of 20 pieces under the "Stock" MRP Element.
Material X also has five Order Reservations (OrdRes), for 5 pieces each. These Order Reservations are assigned to Storage Location SL02, because stock is procured from there.
What I want is to have the "Stock" line only show me the stock of SL01 (Stock = 15 pieces). I want SAP to "ignore" whatever it has in SL02 and only consider the stock in SL01, so MRP Run would give a proposal of 5 pieces.
I tried deactivating SL02 in Material Master MRP4 for material X, but then the MRP Run doesn't generate any proposals because my reservations are in SL02, and it's deactivated. Even if my Availability Check is set not to look at "storage location", if I the requirement is in SL02, it won't propose anything.
Is there any other solution to my problem? How can I have the system ignore the stock in SL02, but still propose those 5 pieces I'm missing in SL01?

I have material X with two storage locations: SL01 and SL02. Storage location SL01 has 15 pieces and SL02 has 5 pieces. In MD04, I can see a total of 20 pieces under the "Stock" MRP Element.
Material X also has five Order Reservations (OrdRes), for 5 pieces each. These Order Reservations are assigned to Storage Location SL02, because stock is procured from there.
What I want is to have the "Stock" line only show me the stock of SL01 (Stock = 15 pieces). I want SAP to "ignore" whatever it has in SL02 and only consider the stock in SL01, so MRP Run would give a proposal of 5 pieces.
Sorry, but your logic is not clear to me...
your stock:
5 pcs (SL02) + 15 (SL01) = 20 pcs
your requirements
5 x 5 pcs (SL02) = 25 pcs
Procurment proposal (w/o excluding SLoc):
20 pcs (stock) - 25 pcs (requirements) = -5 pcs > procurement proposal 5 pcs
You are saying:
What I want is to have the "Stock" line only show me the stock of SL01 (Stock = 15 pieces). I want SAP to "ignore" whatever it has in SL02 and only consider the stock in SL01, so MRP Run would give a proposal of 5 pieces.
So, you can see MRP will give a procurement proposal of 5 pcs without any SLoc exclusion...
Please clarify your requirement / business process. Why don't you want to consider the stock in Sloc2? What is your process?
You can see that you cannot exclude a SLoc with Sloc MRP and still consider the requirements relevant to that SLoc (unless you use reorder point planning in that SLoc).
Thanks,
Csaba

0ic_c03 storage location wise - Valuated Stock Value is Blank

Dear Gurus,
I have successfully loaded Inventory data as per standard document.
Stock Qty and Value both are matching correctly at Plant Level, Material Level. All scenarios tested okay.
But as soon as I drill down further by Storage Location, It shows only Stock Qty. Stock Value becomes Blank.
Please suggest if anything missing in transformation or any assignment or routine.
10 marks will be given if suggestion works, for hints also I will give some marks.
Regards,
Sachin
Edited by: Sachin Sawant on Jun 26, 2010 5:38 PM

Hi,
Please check :
Reports in BW with storage location and stock type chars.
SAP Note Number: 589024
-Vikram

Storage location,Stocktype,Batch no for 2lis_03_um

hi experts,
We have recently extracted Inventory Data from ECC to BW System, and client was reconciling the data in 0IC_C03.
we have extracted from 2lis_03_bx,2lis_03_bf and 2lis_03_um.
and for the Valuations which 2LIS_03_UM-->0IC_C03 client is saying that there is no Storage Location, Stocktype, Batch number.There is no "storage location" for valuations, this means that if you search on a storage location you will miss price changes. so we need storage location to be filled out in the cube.
The same goes for batch number, stock type and Base Unit of measure.
What is the solution to achieve this? Last month only we have initialized the data and delta loads are happening everyday.
instead of enhancing the data source can we change in the Transformations level to get Storage location,Stocktype,Batch number and 0BASE_UOM.
if i have to enhance the data source do i need to take downtime and Initialize the delta again.
please provide me the solution..
eXPERTS any updates plz
regards
venuscm
Edited by: venugopal vadlamudi on Oct 14, 2010 6:20 AM

Note 589024 - Reports in BW with storage location and stock type chars.

Missing Storage Location

Similar Messages

Maybe you are looking for