Missing sub-workflow versions in PO, Contract, and Bid workflows

In SRM 5.0, the definitions for the following workflow templates are missing:
WS14000076, WS14000085, WS79000003.
These are sub-workflows used by WS14000075 (PO), WS14000086 (Contract), and WS79000010 (Bid). Any feedback will be appreciated.
Thank You,
Kiran

hi,
14000076 Wait for BUS2201 Events
14000085 Wait for BUS2000113 Events
79000003 Wait for BUS2202 Events
i have checked these and are available , these are all wait events.
you can see the details in the tranaction
1) Transaction ---> PFTC
2) Enter Task type ---> Workflow template
3) In the Task Enter ---> 14000085.
4) click Display
you can see the details , perform the same for other two to get details

Similar Messages

Disappointed with IOS7, i had organized my music library as per the Genre and now im unable to hear all the songs of the same genre like in the earlier versions. The options of "all albums" and "all songs" are missing in this version of IOS. Help Please..

Disappointed with IOS7, i had organized my music library as per the Genre and now im unable to hear all the songs of the same genre like in the earlier versions. The options of "all albums" and "all songs" are missing in this version of IOS. Help Please..

It would be nice if you told others the steps you've tried and/or how you used to have your setup.
Anyway have you tried tapping MORE this will then bring you to
the selection-list of Audiobooks, Genres, Compilations & Composers.
Selecting Genres gives you a list of all your music split into genres which was set within the Music downloaded via iTunes or uploaded from CD or which you may have set yourself.
Then you just select the Genre you want:
If certent songs are not correctly gategorised you may need to go into iTunes and reselect via Get-info
>Info>Genre and change it there. That way you should end up with all songs of Jazz or other in 1 place.

Workflows | Defining sub-workflows and capturing wfActions

Hi All,
I am trying to define a sub-workflow post which I want to make a jump based on the action taken in the one step sub-workflow. I tried to use the wfActions to find the action taken at a step, but the applet shows the following error:
Offset in runtime evaluation is at character 17. Could not find the parameter 'wfAction'.
I even tried to do a <$wfSet("myvar",wfAction)$> which gave the same error.
I tried to capture this action in the Update section of the script as well as in the Exit section. Has someone used this parameter, has it worked on UCM 10gR3.
Thanks in advance
- AU

Kara,
Thanks for that
Paul
"Kara Moscoe" <[email protected]> wrote:
Your sub-workflow template definition must be defined for the current
organization, must have a Start node defined as "Called", and it must
be
marked "Active" for it to display in the Start Workflow dialog.
Kara
"Paul Clements" <[email protected]> wrote in message
news:3b8e5800$[email protected]..
Hi,
I am trying to get wlpi to allow me once a workflow is completed tostart
another
different workflow. Hence I have tried on the done icon to add anaction
of type
start workflow but when the start workflow window pops up there areno
workflows
that I can start even though some exist. Can someone shed any lighton
what I
am doing wrong?
Many thanks
Paul Clements

Workflow for SRM (contracts and purchase)

Hi Gurus..could you send me this documentation of Workflow
(configuration guide). I have to activate the N-Steps approval fo contracts and purchase order for SRM 5.0.
thanks,
Gustavo Nogueira

Hi,
See the foll links;
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/content.htm
http://help.sap.com/saphelp_srm40/helpdata/en/5a/c5173f5ff48443e10000000a114084/content.htm
http://help.sap.com/saphelp_srm40/helpdata/en/26/0f8b41ed891609e10000000a155106/content.htm
BR,
Disha.
Do reward points for useful answers.

Missing Standard country version (and template)

Hi,
In our system I am about to create a company code for Mexico but before doing so I checked what local customising for Mexico was available in configuration as standard. Unfortunately for whatever reason, the country version settings for Mexico and most of the other countries with standard versions are not in our SAP system.
I have checked client 000 and can see them there but what I am not clear about are the options to get all the configuration associated with the Mexico country version into our development system i.e. whether there is automated tools for this or has to be a manual process given that I am dealing with a standard country version which should already be in our system but isn't.
Before my time we were on version 31i and then migrated to ECC6.0 so perhaps these standard country versions were left out at this point and 31i is no longer available for me to check this, not that it would help anyway with what to do now.
I have seen plenty of SAP notes on this topic, 641257, 63805, 63631, 65934, 162594, 91096, 81892, 48047, 602901, 73606 & 150629 being some of these so please don't refer me to any of these SAP notes or any others that don't specifically deal with what options are available when a standard country version is missing from a SAP system and is required as a reference when implementing in that country.
Are there any defined steps/process that needs to be followed for a situation like this where the required standard country version is not available in our SAP system.
I: will post this message again at a higher level in this forum as I see a lot of views on other threads but very few replies so not sure if I will get the answer from within this Globalisation services but it would appear to have been the correct area to post a thread on this topic.
Thanks in advance,
Michael

Hi Nils,
I have set logon language both in R/3 suo1 and portal personalization tab in EHP5 ESS 1.50 and MSS 1.51.
But I am seeing portal page with combination of English and country specific language in EHP5.
Please do the needful, Have I can change fully.
With Regards
Seranjeeve

Sub contracting and production time

Hello Experts,
My problem is related to sub contracting and how to reflect the time the subcontractor needs to produce the goods.
My system works as follows.
I create a subcontacting for material A. This material has delivery time 5 days. I supply the subcontractor vendor with material B. This material has also delivery time 5 days.
So, when I set the delivery date to ie 02.02.09 for component A, I get the requirements date for component B to 10 days less than my requirements date.
This means that I need to have B in my stock 10 days before I get A into stock. I guess that this is caluclated using A and B's delivery time and in this case, the five days i meant to reflect the number of days from me to the vendor.
This does not reflect my needs.
I also need to be able to reflect the production time at the vendor. This is the number of days between he receive B and when he can ship A. As this works now, the vendor is given no time to manifacture A out of B.
Second, the time it takes to ship B will be very different denpendent on which vendor who will receive it.
Any ideas how this is done?
rgds
GAR

Hi,
Please define the Total replenishment lead time (in workdays) according to your requirement.
There is no point in maintaining the Total replenishment lead time field (in MRP 3 view of material master) for materials procured externally.
In external procurement, the system adds the processing time from purchasing (maintained in SPRO> Materials Management> Consumption Based Planning> Plant Parameters> Carryout overall maintanance of Plant Parameters-->Maintain --> External Procurement), the planned delivery time, and the goods receipt processing time ( both in the MRP 2 view of material master data or in Vendor master data) and uses this total as the replenishment lead time for an availability check with replenishment lead time.
Hope this will help.
Regards,
Narayana.

Missing or invalid version of SQL library PSORA (200,0)

I am trying to configure App. Server on Vista laptop machine.
The machine name is VRGhati03.
It is a logical 3 tier archtecture. Its a EPM 9.0 Install. My database (PFDMO) is all configured and I am able to signon using a User ID VP1 and password VP1. My connect id is people with password of peop1e.
My access id is SYSADM.
I have created a user id in Oracle as VP1 and granted him the PSADMIN role .
When I try to boot up the App. Server it tells me ' Missing or invalid version of SQL Library PSORA' and 'Could not sign on to database PFDMO with user VP1'
The VP1 sign on works via SQLPLUS.
I also created a User Account of VP1 and tried to boot the appserver under that id but still no success.
I have gone thru some of the postings on this topic but they have not helped me. What am I doing wrong?
Below are the details of the log files, portion of my psappserv.cng file and the system environment variables.
Can somebody help. Thanks in advance
Sudhir
I) Log from APPSERV:
PSADMIN.10000 (0) [08/05/09 09:19:24](0) Begin boot attempt on domain PFDMO
PSWATCHSRV.2556 (0) [08/05/09 09:19:33] Checking process status every 120 seconds
PSWATCHSRV.2556 (0) [08/05/09 09:19:33] Server started
PSAPPSRV.5636 (0) [08/05/09 09:19:34](0) PeopleTools Release 8.49 (WinX86) starting
PSAPPSRV.5636 (0) [08/05/09 09:19:34](0) Cache Directory being used: C:\PT8.49\appserv\PFDMO\CACHE\PSAPPSRV_2\
PSAPPSRV.5636 (0) [08/05/09 09:19:34](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSAPPSRV.5636 (0) [08/05/09 09:19:34](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PFDMO with user VP1.
PSAPPSRV.5636 (0) [08/05/09 09:19:34](0) Server failed to start
PSWATCHSRV.2556 (0) [08/05/09 09:19:35] Shutting down
PSADMIN.10000 (0) [08/05/09 09:19:41](0) End boot attempt on domain PFDMO
II) Log from TUXLOG:
091924.VRGHATI03!PSADMIN.10000: Begin attempt on domain PFDMO
091927.VRGHATI03!tmadmin.9844.8684.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
091929.VRGHATI03!tmboot.9720.8272.-2: 08-05-2009: Tuxedo Version 9.1, 32-bit
091929.VRGHATI03!tmboot.9720.8272.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 60 seconds
091929.VRGHATI03!tmboot.9720.8272.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
091931.VRGHATI03!BBL.8340.3320.0: 08-05-2009: Tuxedo Version 9.1, 32-bit, Patch Level 036
091931.VRGHATI03!BBL.8340.3320.0: LIBTUX_CAT:262: INFO: Standard main starting
091933.VRGHATI03!tmboot.9224.8412.-2: 08-05-2009: Tuxedo Version 9.1, 32-bit
091933.VRGHATI03!tmboot.9224.8412.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 60 seconds
091933.VRGHATI03!tmboot.9224.8412.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
091933.VRGHATI03!PSWATCHSRV.2556.9492.-2: 08-05-2009: Tuxedo Version 9.1, 32-bit
091933.VRGHATI03!PSWATCHSRV.2556.9492.-2: LIBTUX_CAT:262: INFO: Standard main starting
091934.VRGHATI03!PSAPPSRV.5636.9008.0: 08-05-2009: Tuxedo Version 9.1, 32-bit
091934.VRGHATI03!PSAPPSRV.5636.9008.0: LIBTUX_CAT:262: INFO: Standard main starting
091934.VRGHATI03!PSAPPSRV.5636.9008.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
091934.VRGHATI03!tmboot.9224.8412.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
091938.VRGHATI03!BBL.8340.3320.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
091941.VRGHATI03!PSADMIN.10000: End boot attempt on domain PFDMO
III) System Environmental Variables:
LIBPATH=c:\oracle\product\10.2.0\db_1\LIB
ORACLE_SID=PFDMO
OS=Windows_NT
path=C:\oracle\product\10.2.0\db_1\bin;C:\product\10.1.3.1\OracleAS_1\jdk\bin;C:\product\10.1.3.1\OracleAS_1\ant\bin;C:\product\10.1.3.1\OracleAS_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLShared\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\bea\Tuxedo9.1\bin
TUXDIR=C:\bea\Tuxedo9.1
IV) psappserv.cfg File:
[Startup]
;=========================================================================
; Database Signon settings
;=========================================================================
DBName=PFDMO
DBType=ORACLE
UserId=VP1
UserPswd=tRWpMM0Cragi9I0nrWPAxZ+GS1YD0PRXzCrF4YWbe5E=
ConnectId=people
ConnectPswd=kyD3QPxnrag=
ServerName=VRGhati03
[Database Options]
;=========================================================================
; Database-specific configuration options
;=========================================================================
SybasePacketSize=
UseLocalOracleDB=0
;ORACLE_SID=
EnableDBMonitoring=1
OracleDisableFirstRowsHint=0
[Security]
;=========================================================================
; Security settings
;=========================================================================
Validate Signon with Database=0
[Workstation Listener]
;=========================================================================
; Settings for Workstation Listener
;=========================================================================
Address=%PS_MACH%
Port=7000
Encryption=0
Min Handlers=1
Max Handlers=3
Max Clients per Handler=40
Client Cleanup Timeout=60
Init Timeout=5
Tuxedo Compression Threshold=5000
[JOLT Listener]
;=========================================================================
; Settings for JOLT Listener
;=========================================================================
Address=%PS_MACH%
Port=9000
Encryption=0
Min Handlers=5
Max Handlers=7
Max Clients per Handler=40
Client Cleanup Timeout=10
Init Timeout=5
Client Connection Mode=ANY
Jolt Compression Threshold=1000000
[JOLT Relay Adapter]
;=========================================================================
; Settings for JOLT Relay Adapter (JRAD)
;=========================================================================
Listener Address=%PS_MACH%
Listener Port=9100
[Domain Settings]
;=========================================================================
; General settings for this Application Server.
;=========================================================================
Domain ID=PFDMO
Add to PATH=c:\oracle\product\10.2.0\db_1\BIN
Spawn Threshold=1,600:1,1
Restartable=Y
;Log Directory=%PS_SERVDIR%\LOGS
; This allows for dynamic changes to certain setting without having to reboot
; the domain. The settings that can be dynamically changed are: Recycle Count,
; Consecutive Service failures, Trace SQL, Trace Mask SQL, TracePC, TracePCMask,
; TracePpr, TracePprMask, TracePIA, TracePIAMask, Log Fence, Enable DB Monitoring,
; Enable Debugging, LogErrorReport, MailErrorReport, DumpMemoryImageAtCrash
; These settings are further identified by the "Dynamic change allowed for .."
; comment.
Allow Dynamic Changes=N
; Logging detail level
; Level Type of information
; -100 - Suppress logging
; -1 - Protocol, memory errors
; 0 - Status information
; 1 - General errors
; 2 - Warnings
; 3 - Tracing Level 1 (default)
; 4 - Tracing Level 2
; 5 - Tracing Level 3
; Dynamic change allowed for LogFence
LogFence=3
; Trace-Log File Character Set: Character set used for log and trace files
Trace-Log File Character Set=ANSI
[PeopleCode Debugger]
;=========================================================================
; PeopleCode Debug Server settings
;=========================================================================
PSDBGSRV Listener Port=9500
; PeopleCode Debugger Trace Settings
; Level Type of tracing
; 0 Off (default)
; 1 Level 1 - log connection activity
; 2 Level 2 - log debug broker transactions (getsession, register/unregister, acquire/unacquire)
; 3 Level 3 - log primary debuggee/debugger transactions (register, modechange, seteventflag, break)
; 4 Level 4 - log debuggee/debugger variables transactions
; 5 Level 5 - log debuggee/debugger command responses and gotbreaks
; Warning: Levels 3 thru 5 result in lots of transaction data being logger and require plenty of disk space.
DebuggerMsgLogEnable=0
[Trace]
;=========================================================================
; Server Trace settings
;=========================================================================
; SQL Tracing Bitfield
; Bit Type of tracing
; 1 - SQL statements
; 2 - SQL statement variables
; 4 - SQL connect, disconnect, commit and rollback
; 8 - Row Fetch (indicates that it occurred, not data)
; 16 - All other API calls except ssb
; 32 - Set Select Buffers (identifies the attributes of columns
; to be selected).
; 64 - Database API specific calls
; 128 - COBOL statement timings
; 256 - Sybase Bind information
; 512 - Sybase Fetch information
; 1024 - SQL Informational Trace
; 4096 - Manager information
; 8192 - Mapcore information
; Dynamic change allowed for TraceSql and TraceSqlMask
TraceSql=0
TraceSqlMask=12319
; PeopleCode Tracing Bitfield
; Bit Type of tracing
; 1 - Trace Evaluator instructions (not recommended)
; 2 - List Evaluator program (not recommended)
; 4 - Show assignments to variables
; 8 - Show fetched values
; 16 - Show stack
; 64 - Trace start of programs
; 128 - Trace external function calls
; 256 - Trace internal function calls
; 512 - Show parameter values
; 1024 - Show function return value
; 2048 - Trace each statement in program (recommended)
; Dynamic change allowed for TracePC and TracePCMask
TracePC=0
TracePCMask=4095
; Panel Processor Tracing Bitfield
; Bit Type of tracing
; 1 - Log extra debug messages
; 2 - Dump panel after build
; 4 - Dump buffers after PPRInit
; 8 - Dump buffers before/after service
; 16 - Dump buffers after scrollselect
; 32 - Dump buffers after modal panel
; 64 - Dump buffers before save
; 128 - Dump buffers after insertrow
; 256 - Trace default processing
; 512 - Dump PRM data
; 1024 - Show function return value
; 2048 - dump memory statistics
; 4096 - Trace related display processing
; 8192 - Trace keylist generation
; 16384 - Trace work record settings
; Dynamic change allowed for TracePPR and TracePPRMask
TracePPR=0
TracePPRMask=32767
; PIA Page Generation Tracing Bitfield
; Bit Type of tracing
; 1 - Log page generation errors
; 2 - Show table layout via cell borders in generated page
; 4 - Annotate field overlap in HTML source
; 8 - Detailed trace of table generation algorithm
; 16 - Inline stylesheet in generated pages
; 32 - Inline javascript in generated pages
; 64 - QATesting - annotation and extra tags needed by Robot
; 128 - Format source. Make HTML more readable
; 256 - Save File. Save each generated page in log directory
; 512 - Debug JavaScript. Include debug functions in page
; 1024 - Log form data. Log all request parameters on each service
; 2048 - Log key errors. Write log message for unrecognized query parameters.
; Dynamic change allowed for TracePIA and TracePIAMask
TracePIA=0
TracePIAMask=32767
; AE Tracing Bitfield
; Bit Type of tracing
; 1 - Trace STEP execution sequence to AET file
; 2 - Trace Application SQL statements to AET file
; 4 - Trace Dedicated Temp Table Allocation to AET file
; 8 - not yet allocated
; 16 - not yet allocated
; 32 - not yet allocated
; 64 - not yet allocated
; 128 - Timings Report to AET file
; 256 - Method/BuiltIn detail instead of summary in AET Timings Report
; 512 - not yet allocated
; 1024 - Timings Report to tables, ignored if Process Instance is 0
; 2048 - DB optimizer trace to file
; 4096 - DB optimizer trace to tables
; 8192 - Transform trace
TraceAE=0
; Analytic Server Tracing Bitfield
; MostSignificantBit -> LeastSignificantBit
; QAS |ACE MODEL | ACE CALC | ACE API| Plugin | DCache | Utils | Analytic Server |
; 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
; Bit Type of tracing 3 bits per component (octal word)
; 1 - Analytic Server LSB
; 2 - Analytic Server MSB LSB LogFence
; 4 - Analytic Server MSB --- --- --------------------
; 8 - Utilities LSB 0 0 0 0 (Severity_Status)
; 16 - Utilities 0 0 1 1 (Severity_Error)
; 32 - Utilities MSB 0 1 0 2 (Severity_Warn)
; 64 - DataCache LSB 0 1 1 3 (Severity_Info)
; 128 - DataCache 1 0 0 4 (Severity_Trace1)
; 256 - DataCache MSB 1 0 1 5 (Severity_Trace2)
; 512 - Plug-in LSB 1 1 0 6 (not used)
; 1024 - Plug-in 1 1 1 7 (not used)
; 2048 - Plug-in MSB
; 4096 - ACE API LSB
; 8192 - ACE API
; 16384 - ACE API MSB
; 32768 - ACE CALC LSB
; 65536 - ACE CALC
; 131072 - ACE CALC MSB
; 262144 - ACE MODEL LSB
; 524288 - ACE MODEL
; 1048576 - ACE MODEL MSB
; 2097152 - QAS LSB
; 4194304 - QAS
; 8388608 - QAS MSB
; The bits enable logging for OptEngine components beyond the standard
; LogFence setting. E.g., TraceAnalytic=14380470 sets full trace on all components.
; Using 110 (1 greater than Severity_Trace2) for each component:
; OptEng: 4 + 2
; Utils : 32 + 16
; DC : 256 + 128
; Plugin: 2048 + 1024
; ACE API: 16384 + 8192
; ACE CALC: 131072 + 65536
; ACE MODEL: 1048576 + 524288
; QAS : 8388608 + 4194304
; Total : 14380470
TraceAnalytic=9586980
TraceAnalyticMask=16777215
; Performance Monitor Tracing Bitfield
; Bit Type of tracing
; 1 - Trace All performance monitor agent activity
TracePPM=0
; Create a memory image of the failing process during a crash
; Setting Meaning
; NONE no memory image
; MINI mini memory image
; FULL full memory image
; If set to MINI or FULL, when a crash occurs, a memory.dmp file is
; generated under <log directory>/<server name>.<process id>.
; Dynamic change allowed.
DumpMemoryImageAtCrash=NONE
;If set to Y, when a crash occurs, the application server process will write
;additional information to help in debugging the crash that occurred.
;This consists of the customized object definitions for reproducing
;the request on another database.
DumpManagerObjectsAtCrash=Y
; If set to Y, when a runtime error is detected, the message and a dump of
; the application state will be written to the current log file.
; Dynamic change allowed.
LogErrorReport=N
; When set to an email address, an email will be sent when an error report
; or a crash dump is written to the log.
; Dynamic change allowed.
MailErrorReport=
[Cache Settings]
;==============================================================================================
; Settings for managed object caching;
; Default EnableServerCaching=2, ServerCacheMode=0
; Default CacheBaseDir=%PS_SERVDIR% if defined else %PS_HOME/<domain name>/cache
; You can change these values by uncommenting and setting to the desired value
;==============================================================================================
; EnableServerCaching -
; 0 Server file caching disabled
; 1 Server file caching limited to most used classes
; 2 Server file caching for all types
;EnableServerCaching=2
; CacheBaseDir = the base file cache directory
;CacheBaseDir=%PS_SERVDIR%
; ServerCacheMode
; 0 One file cache directory per app server process
; 1 One file cache directory per domain (shared file cache, needs to be preloaded)
;ServerCacheMode=0
; Deprecated cache settings : MaxInMemoryObjects
; MaxCacheMemory - controls cache memory pruning
; 0 cache memory pruning disabled
; >0 max size of memory cache in MBytes
MaxCacheMemory=0
; Preload Cache projects for file and in memory cache
;PreloadFileCache=
;PreloadMemoryCache=
[RemoteCall]
;=========================================================================
; Settings for RemoteCall
;=========================================================================
; RemoteCall child process output redirection
; If this parameter is non-zero, the child process output is saved to
; <Domain Settings\Log Directory>\<program>_<oprid>.out, and any error
; output is saved to <program>_<oprid>.err.
; By default, the output is not saved
RCCBL Redirect=0
; Location of COBOL programs
; NT/Windows 2000: By default, RemoteCall looks for the COBOL programs in
; %PS_HOME%\cblbin%PS_COBOLTYPE%. PS_COBOLTYPE is automatically set when
; the application server is started. The value depends upon the database.
; Possible values:
; PS_COBOLTYPE = A (non-Unicode)
; PS_COBOLTYPE = E (EBCDIC)
; PS_COBOLTYPE = U (Unicode)
; UNIX: By default, RemoteCall looks for the COBOL programs in $PS_HOME/cblbin.
; You can override the default setting by commenting out the appropriate
; line and modifying the setting to fit your requirements.
; NT/Windows 2000:
;RCCBL PRDBIN=%PS_HOME%\cblbin%PS_COBOLTYPE%
; UNIX:
;RCCBL PRDBIN=%PS_HOME%/cblbin
[PSAPPSRV]
;=========================================================================
; Settings for PSAPPSRV
;=========================================================================
; UBBGEN settings
Min Instances=3
Max Instances=3
Service Timeout=300
; Number of services after which PSAPPSRV will automatically restart.
; If the recycle count is set to zero, PSAPPSRV will never be recycled.
; The default value is 5000.
; Dynamic change allowed for Recycle Count
Recycle Count=5000
; Percentage of Memory Growth after which PSAPPSRV will automatically restart.
; Default is 20, meaning additional 20% of memory growth after the process has
; built up its memory cache.
; Uncomment the setting to use memory growth instead of Recycle Count at
; determining the restart point.
; Percentage of Memory Growth=20
; Number of consecutive service failures after which PSAPPSRV will
; automatically restart.
; If this is set to zero, PSAPPSRV will never be recycled.
; The default value is zero.
; Dynamic change allowed for Allowed Consec Service Failures
Allowed Consec Service Failures=2
; Max Fetch Size -- max result set size in KB for a SELECT query
; Default is 5000KB. Use 0 for no limit.
Max Fetch Size=5000
; Automatically select prompt, 1 = yes, 0 = no
Auto Select Prompts=1
; This parameter is used for Tuxedo Queue Thresold Determination (used forPub/Sub
; processing only). This parameter is the actual Tuxedo message queue size.
; This is a kernel parameter in Unix. For Windows, look in BEA Tuxedo, IPC Resources.
; A value of 0 will disable Tuxedo Queue threshold Determination and usage.
; A value of -1 will use these defaults: Windows = 65535, AIX = 4000000,
; Solaris = 65535, HP = 65535
Tuxedo Queue Size=65535
[PSANALYTICSRV]
;=========================================================================
; Settings for PSANALYTICSRV
;=========================================================================
; UBBGEN settings
Min Instances=3
Max Instances=3
; Number of Analytic Instances an Analytic Server instance will load and
; unload before recycling. If the recycle count is set to zero, the
; Analytic Server will never be recycled.
; The default value is 1.
; Dynamic changes to this setting are allowed. A dynamic change will
; affect running Analytic Servers.
;Recycle Count=1
; Number of minutes an analytic instance will remain loaded without being
; accessed when it is auto-loaded by the analytic grid or when a
; PeopleCode program loads the instance with a timeout value of -1.
; The default value is 30
; Setting this to zero will disable timeouts for auto-loaded instances.
; Dynamic changes to this setting are allowed.
;Analytic Instance Idle Timeout=30
; Setting this to 1 will cause each analytic server to log to it's own
; file rather than the common PSANALYTICSRV_<Month|Day>.LOG file. The
; individual log files will include the Tuxedo server ID.
; Dynamic changes to this setting are allowed. Changes will only come
; into affect for running analytic servers when they are recycled.
; The default value is 0
;Analytic Per Server Log=1
; This setting determines what is the threshold to enable file swaping
; in ACE. Each data block is of 6K. Each data cube is divided into multiple
; data blocks. In batch environment this could be configured to a higher value.
; The default value is 1024 blocks. If set to zero, the disk swaping is disabled.
;ACE Max Memory Data Blocks=1024
; Queue size for data loading in batches. If set to zero, batch loading is disabled.
;ACE Load Queue Size=100000
[PSSAMSRV]
;=========================================================================
; Settings for PSSAMSRV
;=========================================================================
; UBBGEN settings
; PSSAMSRV never spawns, so we set Instances instead of setting a Min and
; Max value for Instances.
Min Instances=1
Max Instances=3
Service Timeout=300
; Number of services after which PSSAMSRV will automatically restart.
; If the recycle count is set to zero, PSSAMSRV will never be recycled.
; The default value is zero.
Recycle Count=100000
; Number of consecutive service failures after which PSSAMSRV will
; automatically restart.
; If this is set to zero, PSSAMSRV will never be recycled.
; The default value is zero.
Allowed Consec Service Failures=2
; Max Fetch Size -- max result set size in KB for a SELECT query
; Max Fetch Size=n indicates n * 1024 bytes
; Default is 32KB. Use 0 for no limit
Max Fetch Size=32
[PSQCKSRV]
;=========================================================================
; Settings for PSQCKSRV
;=========================================================================
; UBBGEN settings
Min Instances=1
Max Instances=3
Service Timeout=300
; Number of services after which PSQCKSRV will automatically restart.
; If the recycle count is set to zero, PSQCKSRV will never be recycled.
; The default value is zero.
Recycle Count=100000
; Number of consecutive service failures after which PSQCKSRV will
; automatically restart.
; If this is set to zero, PSQCKSRV will never be recycled.
; The default value is zero.
Allowed Consec Service Failures=2
; Max Fetch Size -- max result set size in KB for a SELECT query
; Default is 5000KB. Use 0 for no limit.
Max Fetch Size=5000
[PSQRYSRV]
;=========================================================================
; Settings for PSQRYSRV
;=========================================================================
; UBBGEN settings
Min Instances=1
Max Instances=3
Service Timeout=1200
; Number of services after which PSQRYSRV will automatically restart.
; If the recycle count is set to zero, PSQRYSRV will never be recycled.
; The default value is zero.
Recycle Count=100000
; Number of consecutive service failures after which PSQRYSRV will
; automatically restart.
; If this is set to zero, PSQRYSRV will never be recycled.
; The default value is zero.
Allowed Consec Service Failures=2
; Max Fetch Size -- max result set size in KB for a SELECT query
; Default is 10000KB. Use 0 for no limit.
Max Fetch Size=10000
; Use dirty-read(uncommitted read) for PSQRYSRV only on DB2/OS390 or SQL Server
Use dirty-read=0

VP1 is an application user, not a database user.
PS is a database user, the Peoplesoft objects' owner. It is also an application user on some application.
Did you try to connect onto the database with people user through SQL*Plus ? Are you able to read PSOPRDEFN, PSVERSION, PSACCESSPRFL tables ?
What Vista version are you on ? What Oracle version ?
If you have Metalink3 access, you should read the note :
Missing or invalid version of SQL library libpsora (0,0) or (200,0) (Doc ID 608741.1)+
Nicolas.

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

Missing Sub VI error when running Application.exe in development PC

Hi,
I have created an application(exe) on my computer, which is also where I have also designed the different blocks of code for this application.
All the blocks of code work just fine when made to run through Labview 2013 development software. After adding all the VI files associated with the project in the project explorer of a new project and configuring the build specifications, I was able to create the executable. But, when I try running this executable/application(.exe) file, I get the missing subVI message. I found that some of these missing sub VIs are the Instrument driver VIs which work absolutely fine when run through the LabVIEW development sofware.
How can I resolve this issue?
Attachment "Error Screenshot" shows the Missing sub VI message.
Attachment "Project & Error Screenshot" shows the Missing sub VI message along with the list of dependencies in the project, which shows the error being displayed eventhough the sub VI is present in the dependency list.
Any comments in this regard are highly appreciated.
Regards,
Vivek
Attachments:
Error Screenshot.jpg ‏257 KB
Project & Error Screenshot.jpg ‏360 KB

vivek.madhavan.13 wrote:
Thanks for your comment Jeff,
But what about the 'subBuildXYGraph.vi', 'Waveform Array To Dynamic.vi' and other such VI's in the attached error message that are not a part of the Rohde and Schwarz drivers but are included in the vi.lib folder? Ideally, labview must be able to find/trace atleast these VIs while performing the build procedure, right?
Vivek
If they are (Non dynamically called)-dependancies of always included dynamic calls, Yes, the build will include them.
I hate to say it but, Start with the rs dynamic vis and keep adding if that meerely helps reduce the list of the missing vis.
Jeff

Can't renew contract and upgrade phones 1 1/2 days early?

Last Saturday I tried to renew my contract and upgrade mine and my wife's phones to the Galaxy S5 at the Tunnel Rd, Asheville NC location. My official contract renewal date for both phones was the following Monday, but due to the nature of my work, and the fact that I have to schedule said work around my wife's cancer treatments, I rarely am able to make it to any business within business hours. I had hoped that renewing 1 1/2 days early would be feasible, but upon asking at the Verizon store, I was told by the young lady "assisting" me that, no, they were very strict on not allowing early renewal, and that I should come back Monday. So now it seems that i have missed the buy one get one free deal? That would be very aggravating in and of itself, but imagine my surprise when a friend said no, that you could renew and upgrade 30 days before the official date, and he called customer service in my presence and proved it. So was I pushed out of the store because they were busy, or were they just hoping that I would come back on Monday and pay the normal price for both phones? Is there any way that I can still get the bogo deal? Extremely unhappy with Verizon at the moment, I wish there were more options in the rural are in which I live.

The store service is no good for any situation even MILDLY complicated. We upgraded my husband's phone 3 days early because he was deployed and coming home three days prior to his renewal date and his previous phone no longer worked. He did it over the phone but the order mistakenly got cancelled. Went into a store to try to get it handled and they will literally tell you "We work on a different system that the customer service center." I don't even know what that means, but basically, unless you are starting new service, paying a bill, or buying accessories, they will be of no help. I went home, called back into customer service and got it situated. Had you called in, I am almost certain they would have upgraded you. Unfortunately, as someone has already stated, if the deal is over, they most likely will no longer honor it.

Approval for Contract and Order based on PO date and Document Date Combinat

Dear All,
I have a critical requirement from my client.
1. If the PO date in the contract is less than 10 days or more of the document date [Created date] then further process should not be allowed. Only authorized person should release the contract, and then order creation should be possible.
For example: Customer PO date is 18-07-2011 and if the document date is 28-08-2011, then system should stop for further processing. Only after release this should be allowed to proceed.
2. Sales order scheduled date for item is 30.07.2011 and if the PO date is 18.07.2011 again system should again go for approval. Business requires this because the time gap between the PO date and the delivery date is very short, so only on approval the next process should be allowed.
Is this possible through Status profile? I have tried this but I canu2019t give condition like if it less than the PO date system should go for approval.
Kindly guide me if this is possible and share your ideas.
Best Regards,
Venugopal

Hi Venu,
In user eixt USEREXIT_MOVE_FIELD_TO_VBAP (inlcude MV45AFZZ) write the code to compare the PO date and contract creatioon date and if the PO date is 10days less than the contract creation date reject all the line items with a special reason for rejection at the item level if the document is a contract or if the document is a sales order then populate a delivery block.
Regarding the authorization to release the contract you can think of below options.
Give authorization to only specific people to remove the reason for rejection or remove the delivery block.
Or
If you want to automate the approval process then based on the delivery block setup workflow which will raise an event and trigger an email to the approver inbox. For the approval you can give options like Approve/Reject. Based on the apporver's action design the workflow to change the contract accordingly i.e either removing the delivery block or keep it as it is.

How to link Sales Order with Service Contract and then with Install Base?

Hi Friends,
1) I would like to know the integeration process from sales order to Service Contract and then with Install Base.
2) I couldn't see anything enabled in Service Tab in Order Lines, its grayed out. Is there any set up/profile option to get it enabled?
3) How can we create AR invoice from Service Contract?
Please let me know if anyone has idea on this.
Thanks in Adavance,
Vara

Dear Sid,
Thanks for your promt response.
Let me explain you what I did.
1) I have booked a Bill Only sales order which has one order line, mentioned it as Service Item and provided the same details in Service Tab in Order lines. Now Line status is "Fulfilled"
2) Then Submitted Workflow Back Ground Process for OM Order Lines and it has created an AR Invoice and closed the line
3) And then submitted "Service Contracts Order Capture Integration Program" from SErvice Contracts Responsibility and it completed normal.
4) Now I went in to Launch Contracts Window and queried with the sales order but couldn't see any contract created
5) Then I went in to Reprocess Order Window and found this order shows an error message as "Referenced Product not present in the Installed Base", then I tried to reprocessed it, but the same error message again.
Here I have few doubts:
1) Are the AR invoice and Service Contract Billing Invoices same?
2) In above scenario AR Invoice has been created, I would like to do the billing from SErvice Contracts and need to create an Invoice in AR? how can I do that?
because as you explained in one of my questions earlier, A Single Invoice can be created for the whole duration of the contract. I want to do that and trying for the same.
3) Regarding the above error message, how can I resolve it and create the service contract against that Order?
Thank you so much for your helpful answers.
Regards,
Vara

PeopleTools 8.53 , 9.2 Install - Missing or invalid version of SQL library

Hello All
I am installing 9.2 / 8.53 on a Windows 7 Professional (64 Bit) Machine
I have installed Oracle 11g 32 bit (Server and Client) edition that has the following paths:
C:\oracle\product\11.2.0\dbhome_1 and
C:\oracle\product\11.2.0\client_1
I can connect to DB with SYSADM , PS accounts with no issues and also to App Designer and Data Mover ;
I am trying to configure App Server. The Tuxedo is 64 bit. Installed this with no issue.
On the PSAdmin configuration for App Server, I have provided the path of C:\oracle\product\11.2.0\client_1\bin.
When trying to boot, it gives me the below errors in log file:
PS General SQL Routines: Missing or invalid version of SQL library PSORA64 (200,0)
and stderr file has:
LoadLibraryA() in pscompat.dll failed for 'PSORA64.dll': reason=126
How to fix this?

Your DB should already have been installed on 64 bit Oracle Server.
The Application server, as stated in the installation manual in Task 8A-4: Creating, Configuring, and Starting an Initial Application Server Domain:
Enter 20 for AddToPATH, and enter the path to the 64-bit connectivity software
If DB and Appserver are on the same server you can reuse the DB libs, otherwise you need to install a 64 bit Oracle Client for the application server
Note:
Application Designer, Datamover, etc still need 32 bits Oracle Client for connectivity.

PS General SQL Routines: Missing or invalid version of SQL library libpsora

Hi Everyone,
Need your assistance. Perhaps someone of you encountered this already. I have completed setting up everything until the application server part. If I try to boot the application server I get the error below. I have tried several solution published in Oracle Support and these did not resolve the issue.
Appserv log
PSADMIN.15894 (0) [10/01/10 16:17:21](0) Begin boot attempt on domain hc91dmo
PSAPPSRV.15941 (0) [10/01/10 16:17:50](0) PeopleTools Release 8.50 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.15941 (0) [10/01/10 16:17:51](0) Cache Directory being used: /applications/psoft/hc91/appserv/hc91dmo/CACHE/PSAPPSRV_1/
PSAPPSRV.15941 (0) [10/01/10 16:17:51](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora (200,0)
PSAPPSRV.15941 (0) [10/01/10 16:17:51](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HC91DMO with user PS.
PSAPPSRV.15941 (0) [10/01/10 16:17:51](0) Server failed to start
PSADMIN.15894 (0) [10/01/10 16:17:58](0) End boot attempt on domain hc91dmo
Tuxedo log
161730.TESTLAB-03!BBL.15902.2248875168.0: 10-01-2010: client high water (0), total client (0)5900.2137364080.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
161728.TESTLAB-03!tmboot.15901.2219435552.-2: 10-01-2010: Tuxedo Version 10.3.0.0, 64-bit
161728.TESTLAB-03!tmboot.15901.2219435552.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
161728.TESTLAB-03!tmboot.15901.2219435552.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
161730.TESTLAB-03!BBL.15902.2248875168.0: 10-01-2010: Tuxedo Version 10.3.0.0, 64-bit, Patch Level (none)
161730.TESTLAB-03!BBL.15902.2248875168.0: LIBTUX_CAT:262: INFO: Standard main starting
161733.TESTLAB-03!tmboot.15905.1855951168.-2: 10-01-2010: Tuxedo Version 10.3.0.0, 64-bit
161733.TESTLAB-03!tmboot.15905.1855951168.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
161733.TESTLAB-03!tmboot.15905.1855951168.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
161735.TESTLAB-03!PSWATCHSRV.15906.1160363616.-2: 10-01-2010: Tuxedo Version 10.3.0.0, 64-bit
161735.TESTLAB-03!PSWATCHSRV.15906.1160363616.-2: LIBTUX_CAT:262: INFO: Standard main starting
161750.TESTLAB-03!PSAPPSRV.15941.4117513168.0: 10-01-2010: Tuxedo Version 10.3.0.0, 64-bit
161750.TESTLAB-03!PSAPPSRV.15941.4117513168.0: LIBTUX_CAT:262: INFO: Standard main starting
161751.TESTLAB-03!PSAPPSRV.15941.4117513168.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
161751.TESTLAB-03!tmboot.15905.1855951168.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
161755.TESTLAB-03!BBL.15902.2248875168.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
161758.TESTLAB-03!PSADMIN.15894: End boot attempt on domain hc91dmo
stderr.log
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
Here is my environment configuration.
CentOS 5.4 64 bit
PeopleTools 8.50
HCM 9.1 MultiLanguage
WebLogic 11g R1
Tuxedo 11g R3
VmWare Server 2
Oracle 11g
Thanks ....

It's Oracle 11.2.0.1.0. Yes, I can login to database via SQL PLus.
[oracle@TESTLAB-03 ~]$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 1 17:56:13 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> conn people/peop1e
Connected.
Here what in my .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_HOME=/applications/oracle/product/11.2.0
export TUXDIR=/applications/mdlware/tuxedo10gR3
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib:$TUXDIR/lib
export PATH=$PATH:$ORACLE_HOME/bin:$TUXDIR/bin:$ORACLE_HOME/lib
export PS_HOME=/applications/psoft/hc91
export PS_CFG_HOME=$PS_HOME
. $PS_HOME/psconfig.sh
cd $PS_HOME

PS General SQL Routines: Missing or invalid version of SQL library libpsor

Hi,
I am facing the above error while booting up the Appserver. Could someone help me on these please.
below are the softwares used:
Oracle Linux5.4 64bit
peopletools:8.51
Application HCM:9.1
weblogic wls_1034
Tuxedo 10g3
Stderr shows:
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
Appserv_log
GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora (200,0)
PSAPPSRV.9875 (0) [12/11/12 15:37:28](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HCMDMO with user PS.
Thanks in advance

It's Oracle 11.2.0.1.0. Yes, I can login to database via SQL PLus.
[oracle@TESTLAB-03 ~]$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 1 17:56:13 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> conn people/peop1e
Connected.
Here what in my .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_HOME=/applications/oracle/product/11.2.0
export TUXDIR=/applications/mdlware/tuxedo10gR3
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib:$TUXDIR/lib
export PATH=$PATH:$ORACLE_HOME/bin:$TUXDIR/bin:$ORACLE_HOME/lib
export PS_HOME=/applications/psoft/hc91
export PS_CFG_HOME=$PS_HOME
. $PS_HOME/psconfig.sh
cd $PS_HOME

Missing sub-workflow versions in PO, Contract, and Bid workflows

Similar Messages

Maybe you are looking for