Missing table entries: BSEG

hie gurus
after altering a field structure for BSEG i have noticed that some transactions went missing however i was able to get some of them from tables BKPF(document header) BSIS(2ndry index for G/L accounts) and BSAS(2ndry index for cleared items). however wen i populate the entries from bsis that are not in bseg on documnet display if i double click i cannot get the original document? i have missed sokme information that needs to populated also in bseg but im not sure where to get it.
please assist.
Prince

Hi
Due to the nature of the change required on the table BSEG it meant taking the risk of losing/corrupting data. The former occured and i would advise against making structural changes to field/table definitions on critical tables like BSEG.
regards
Isaac Prince

Similar Messages

Table entries missed

Hi,
Some table entries were missed.
How can we get the details and any solution to get the table entries again?
Regards,
Chandu

Hi,
Are you trying to say that the records got Deleted???
If yes then, the basis team has to restore the SAP system to the point when the table entries were present.
The risk here is the programs and configuration done after that point will get deleted.
Regards,
Vimal.

Standard Table entries missing in E-RECRUIT System

Hi,
We are in the phase of E-Rec implementation. We have installed standalone E-recruit system (NW 7.4)
We did client copy with SAP_CUST profile from 000 to 300, but some of the table were not reflected which we copied again.
We run the report RHTTCP77 for tables t77rcf* and copied client dependent tables from 000 to overcome the issue for the missing tables in 300.
But, still we have an issue with VV_T77SK_RCF as all entries are not updated, what is the way fwd?
Shall we proceed with SAP_CUST or SAP_ALL during client copy if we need above entries?
Can anyone please suggest what way we will follow to overcome the issue of missing tables?
Regards,
Khushboo Sahu

Hi,
Please use SAP_ALL and for step wise instruction please check the below thread -
http://scn.sap.com/thread/121904

SQL Developer 3.1.07 does not show a Tables entry under the Navigator

Installed SQL Developer 3.1.07. Under my Connections window, I log into the SYSTEM account. There is NO tables entry. SYSTEM has access to all tables in the database. It's the same behavior for other database users as well.
I re-installed SQL Developer 3.0.04 and a Tables entry DOES appear for the same SYSTEM user connected to the same database.

Hi J,
I was under the impression that regardless of the Java version that my environment variables are setup to use,
the installation of SQL Developer (when you install with a JDK), that the JDK version installed with SQL Developer
is the one that is used.Exactly correct, unless you decide to override it in the conf file. I needed to be certain you did not.
Anyway, trying to resolve the problem, let's go back to a possibility that something went wrong with the migration of your preference settings. Here is an old thread discussing a missing Tables node in the Connection view (sometimes called the navigator tree):
Table node missing from navigator tree in 3.0.04
The poster had to rename the system directory containing these settings, then ignore the offer to migrate settings upon starting up SQL Developer again. If you never migrated settings in the first place, then I'm not sure what more to say -- probably would require additional research here in the forum. But if you did migrate settings, then try the following:
1. Export your connections (Connections node | right-click | Export Connections...)
2. Exit SQL Developer
3. Rename the directory to something else
4. Restart SQL Developer
5. Import your connections
That directory on my Windows 7 machine for the current production release is something like:
C:\Users\<username>\AppData\Roaming\SQL Developer\system3.1.07.42
Hope this helps,
Gary

T77RCF_SMASK table entries: Error - Customizing table T77RCF_SMASK contains no corresponding entry for SMASK_ID = 0071

Team,
Table T77RCF_SMASK has reference to T77RCF_SMG_ASM.
When compared the two tables we found that following entries are missing in T77RCF_SMASK:
71
72
73
74
75
78
92
95
96
Can you please guide on what should be the entry for these in table T77RCF_SMASK? Would appreciate if full table entries are shown in answer for future users.
Missing entries are causing error "Customizing table T77RCF_SMASK contains no corresponding entry for SMASK_ID = 0071 and so on in SLG1 logs display.
Regards
Yash

The table enteries should be as attached
Regards
Khalid

Function Module to update Characteristic Value (AUSP table entry)

Looking for a function module/BAPI to update a characteristic value (AUSP table entry).
This is for a material master Material classification value, not a Variant Config value that I need to update.
Anybody have one? I have one that will find the value, but not change it.
Thanks.

That wasn't it, but it gave me the one piece I was missing.
Answer is:
Function Module "CLAE_CLASSIFY_OBJECT"
In CHANGE_KSSK
M = 0
KLA = (Class Type)
OBJEK = (Material Number for the Material Characteristic being changed)
OBTAB = MARA
CLASS = (Class Name with Characteristic to be changed)
S = 1
S = (blank)
AENNR = (EC Change Number or Blank)
DATUV = (Today's Date or date for change)
C = "X"
In CHANGE_AUSP
OBJEK = (Material Number for the Material Characteristic being changed)
ATINN = (Chararacteristic to be changed)
M = 0
KLA = (Class Type)
ATWRT = (New Value for Characteristic)
C = X

Missing table T043S

Dear
          Experts,
          Here I am posting outgoing payment with clearing t code F-07,
it gives the Error
The entry (company code) missing table T043S,
Please Give ur reply ASAP.
with regards
Sukeerthi

Hello Sukeerthi ,
This error comes only because of the tolerance group, when this is not updated then this will come
so check the Tcode : OBA0 (put the company code and the tolerance group) - This is for G/L accounts
                                   OBA3(put the company code and the tolerance group) - This is for customer/vendor
                                   OBA4(put the company code amt per doc and amt per open item) - This is for FI tolerance group for users.
I think this will definately help you.
Regards
Urmila S.

Missing some entries in trasaction OKB9 after upgrade to ECC 6.0

We're missing some entries in transaction OKB9 after the upgrade to ECC 6.0. Pariculary, a significant number of records in table TKA3C were not copied over to ECC 6.0.
Have anyone experience this same problem as well. We're at the early stage of unit testing a we're worried that there maybe some other config tables that were not properly copied.
Any help would be appreciated.
Thanks,
Apollo

Hi friends, i fixed this issue.Its a configuration problem.In table T882 they didnt maintaine fisical variant filed for particular compony code.Once this is maintained the problem got solved

Can't display COPA datasource...message table entry doesn't exist

Hi,
I am trying to display my COPA datasource and it's giving me a message stating it can't because a table entry is missing. In debugging I can see the table entry it's reading is tkebwlgn.
I've tried everything, but cannot display/delete this.
Any suggestions?
Thanks.

I resolved this by executing RSA6 and making a "change" by selecting a field as selectible and saving. Then went back in and unchecked it and saved it.
The table entry then appeared and the datasource could be viewed.
Just in case someone else comes across this problem.

How to enter the table entries?

Hi All,
Can anybody please tell me how to do a table entry. Ex., something we were trying in MRKO transaction. System gave the status as " entry ..... is missing in table T052 ? what I have to do now.
regards
Annu

Hi,
T052 table is for payment terms.
Goto OBB8 t.code, maintain entries there.
I think you have not maintained payment terms in your consignment.
Regards,
Chandra
Edited by: chandra sekhar S on Sep 18, 2008 8:39 AM

SMOF_ERPSH table entry

Hi,
I am new to CRM & I am working on CRM 5.0
I have following query.
Here in table SMOF_ERPSH in CRM , The entry for R/3 backend sytem ID is missing . so how can i get the site ID ( 32 digit ) for Backend R/3 ( ECC6) System.
pl. advice in details
Thanking you in advance..
regards,

Hi Sushma,
Maybe you could check transaction smoeac for the R/3 destination.
The table entry in SMOF_ERPSH should be generated after the maintenance in transaction smoeac.
Hongyan

Options - Text Editor - C/C++ missing intellisense entry. Intellisense not working

Options -> Text Editor -> C/C++ missing intellisense entry. Intellisense not working. Solutions to turn options for the editor off and on are not working. The intellisense entry is present for other languages,
such as C#, but not C/C++.
By not working, I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.

Hi JerroldBrody,
Thank you for posting in MSDN forum.
>>I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.
Based on your issue, could you please share me a screen shot about the intellisense right click menu items are grayed out?
Generally, I know that it is default that we can enable the intellisense for C/C++ by going to the TOOLS->Options -> Text Editor -> C/C++ ->Advanced-> IntelliSense like the following screen shot.
So please try to check if you set Disable Intellisense property as False in the VS IDE.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Table entries not getting displayed in desired format

Hi All,
In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output some entries of the table are not displaying in align right and align middle.
Output:In the below output the first row data is not in desired format .
Thanks in Advance,
Suneel.Uggina.

That is pretty to much information to help you.
You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
~Florian

Right way to preserve all parent table entries in a join with many tables!!

This problem is quite interesting to me. I have asked this question to others but no body is able to provide me with proper answers.
The problem is: How do I join a huge parent table with many child tables (more than 5 child tables) preserving all of the parent table entries. Lets say there is the parent table parentTable and three child tables childTable1, childTable2, childTable3. In order to get the data after joining these tables the query that I have been using was:
select parent.field1, parent.field2, parent.field3, child1.field4, child1.field5, child2.field6, child3.field7 from ParentTable parent, childTable1 child1, childTable1 child2, childTable3 child3 where parent.fielda = child1.fieldb and parent.fieldc = child.fieldd and parent.fielde = child.fieldf.
Although the tables are huge (more than 100,000 entries), this query is very fast, however those parent table entries which do not have child entries are lost. I know that I can left join a parent table with a child table and then with the next child table and then with the next child table and continue. Isn't there a simple solution for this commonly happening problem?
Please provide suggestions please...

Hello Lakshmi,
Although I do not know exactly how to achieve what you want to achieve but I have seen DBAs/ABAPers in my experience can run queries/scripts using the COUNT function to give the actual number of line items per table for all your 100 or odd tables.
Rgds
CONMJI

Function module to hold and release lock on MARD table entry

Hi Gurus,
Can you please tell me Function module to HOLD lock on MARD table and the Function Module to release lock on MARD table entry.
Thanks and Regards,
Sudipto

Look via SE11 lock objects, use F4 for tables MAR*, the best for your request is on MARC table with object EMMARCS, so use FM ENQUEUE_EMMARCS and DEQUEUE_EMMARCS.
Regards,
Raymond

Missing table entries: BSEG

Similar Messages

Maybe you are looking for