Missing tables in DB02

Hi Gurus,
In DB02 / Diagnostics displays that following tables are missing:
- ORA_COCKPIT_HELPER
- SFHOT
- T77TNM_IFPROPS
- YINFTOOL
I found some sap notes how to solve the issue, but was not able to.
1. What are these tables.
2. Do I need them, if NOT which tables can be deleted, and how exactly
3. Required tables ho can I create them
Pl. give exact instructions
- ZZCON_TEMP (Tried to delete in SE14 / SE11) could not delete.
Pl. advse how to solve the issue, thanks for your help in advance.
sahmad

Transaction DB02 reports a data inconsistency between the database and the ABAP Dictionary:
1) ORA_COCKPIT_HELPER: Read note Note 1374746 - DBA Cockpit: Temporary table ORA_COCKPIT_HELPER it says how to create the missing table ORA_COCKPIT_HELPER
Goto your SQL prompt and the commmand as per note
SQL>create global temporary table ora_cockpit_helper as
select * from ( <p_sql_stmt_text> ) where 1=0
It was just not get created for SAP dictionary. Simple create it....
2) SFHOT: is defined in the ABAP Dictionary as a cluster table and was accidentally created in the database in a previous release. Check that the table is correctly defined in R/3. To do this, you can activate the table in transaction SE11. If this can be done without any errors, the table can be deleted from the database. Use database tools to do this. Read how to go for it from SAPnote :33814
3)T77TNM_IFPROPS: The customizing table T77TNM_IFPROPS only exists in release 4.70 as stated in note 1130425; hence during an upgrade from this release, you might notice that the table and the runtime objects exist without the DDIC reference. Follow as "Note 1396592 - Table T77TNM_IFPROPS - Upgrade discrepancies" says ...
No idea about your fourth table....
all the best !

Similar Messages

DB02 = Missing Tables and Indexes = Unknown objects in ABAP Dictionary = DB views

Hi SAP Gurus,
on our SAP NetWeaver 7.x BW (based on AIX/Oracle) I find via transaction DB02 (path = Diagnostics => Missing Tables and Indexes) under "Unknown objects in ABAP Dictionary" under DB views a BW object /BI0/.....
When I make a double click on the object, I am getting the popup window "Display not possible for this object":
How can I identify the object and clarify with the BW application expert, if needed, how to resolve this object?
I searched already via RSA1 for the object, but I wasn't able to find anything so far ...
Thanks for your help and ideas.
Best regards
Carlos

Hello Carlos
The database view in question is a temporary database object created during a query execution.
Please read this SAP note 449891 - Temporary database objects in BW 3.x to understand what that view is all about and impact if those views are removed.
The SAP notes 449891 and 1139396 suggests to run the report SAP_DROP_TMPTABLES to drop these temporary objects. Whether the objects are still required or not is a question to be put across to the BW team. If the temporary objects are removed when they are used by a query, then the query will fail.
Have a nice day
RB

Transaction DB02 = Missing Tables and Indexes shows under Secondary indexes from package $tmp

Hi SAP Gurus,
I noticed on our SAP business warehouse (BW) system (NetWeaver 7.0 based on AIX/Oracle 11g) in transaction DB02 => Diagnostics => Missing Tables and Indexes under Secondary indexes, 26 indexes, in package $tmp:
The indexes are defined, but they don't have been created on the database.
When I try to create them via the database tool, I am getting the warning:
Does the warning raise up, because they where defined in the $tmp package?
I was looking in SAP notes for a solution for this "warning" concerning the /BIC/F-Indexes but I didn't found yet anything helpful ...
Thanks for your help and ideas ...
Best regards
Carlos

Hi Carlos,
These are secondary indexes created during process chains in BI to improvise performance.
You may refer below SCN blogs on creation of these indices in BI.
Secondary Index - Improving DSO insert/read performance
How to Create Secondary Index on DSO in SAP BW
Hope this helps.
Regards,
Deepak Kori

Missing Tables and Indexes in 3.5

Hi,
when i am executing Tcode DB02 then under Missing Tables and Indexes i find 35 Indexes as not created.
can anybody tell me what does that signify. is this a issue if so how to fix it.
Indexes not created
ADCP-I04
ADCP-I03
ADCP-I02
ADCP-I01
ADCPS-I01
ADCPS-I02
ADCPS-I03
ADCPS-I04
ADRC-I14
ADRC-I11
ADRC-I05
ADRC-I02
ADRC-G
ADRP-I01
ADRP-I02
ADRP-I03
ADRP-I04
ADRP-I07
ADRP-I08
ADRP-I09
ADRV-I01
BUT000-PER
CDHDR-001
CDHDR-002
CRMD_ORDERADM_I-PKI
CRMD_ORDERADM_I-DES
ISSUE_RELATION-001
NAST-ADQ
RMPS_T_RESUB-RAG
RMPS_T_RESUB-RCU
SSPICSPRHD-S02
SSPICSTRHEAD-S01
SSPICSTRPL-FLD
STXH-TDN
SWBRULECOM-RSY
Rakesh

Hi Rakesh,
First thing this is not an issue but an information that says that these indexes are not be created in the System.
This option Indexes not created is an SAP table maintained from Dev to Prod just to indicate that these indexes cannot be created.
That's the reason why u have a green mark beside them and this will make clear for you that this is not an issue.
Hope it helps!!!!
Thanks & Regards,
Neelesh Jain.

Missing indexes in db02

Hello,
Checking DB02 i've found a list of missing primary indexes. I know that i can use SE14 to adjust the indexes but i found some decumentation that says that i should first check if double index for the primary index exist and elimenate them.
Please Advice.
David.

hi David,
oss note 157918
BW: DB02 shows "missing indexes"
Symptom
DB02 shows indexes of a fact table to be missing. Such indexes have names that start with prefixes /BI0/F or /BIC/F (BW 1.2, BW 2.x) or /BI0/E or /BIC/E (BW 2.x only).
Additional key words
Business Information Warehouse, InfoCube, Fact Table, Bitmap Indexes, Oracle, DB02, Unique Index
Cause and prerequisites
For BW 1.2, this only applies to Oracle-based systems. For BW 2.x, this might apply to any DB-platform.
BW 1.2 and BW 2.x take advantage of certain DB-specific features which are not supported by the data dictionary of R/3 4.0, 4.5 or 4.6 base systems. Prominent examples are bitmap indexes on fact tables (Oracle-based BW systems), partitioned/fragmented indexes, nologging and parallel index building facilities etc. Such features are used in BW by triggering native SQL statements which bypass the data dictionary.
While all these features improve performance of the BW system, there are, however, some other transactions that are also affected when the data dictionary is bypassed. Amongst these is DB02. It sometimes claims that certain indexes of infocube fact tables are missing while direct checks on the database level show that those indexes are not missing at all or substituted by equivalent indexes. The latter might happen in BW 2.x where the primary index on fact tables might be replaced by a non-unique index or simply skipped as it is not required. Therefore you can usually ignore those messages. Obviously, we are currently working on removing such inconsistent information. If you want to be sure on the indexing then check the solution section of this note.
Solution
For BW 1.2A systems (Oracle only):
You have to ask your local DBA to check the state of the indexes directly by looking at the USER_INDEXES table on the Oracle database.
For BW 1.2B systems (Oracle only):
There are two alternatives to check the secondary indexes of infocube and aggregate cubes fact tables:
           (1) Go to the Admin Workbench. Go to the infocube. Click the right mouse button and choose "InfoCube Performance". This leads you to a screen that shows the state of those indexes via traffic light semantics. There are also buttons to repair inconsitent states of the indexes.
           (2) Use transaction RSRV. Go to the tabstrip "Database". Choose the item "Indices of an InfoCube and its aggregates" and insert the (technical) infocube name (e.g. 0BWTC_C01) in the input box at the bottom of the screen. Press F8 ("Analysis") and wait until a red, yellow or green light appears beside "Indices of an InfoCube and its aggregates", i.e. in the "Result" column. Then press F6 ("Results") in order to see a detailed report on the index situation of that cube.
           (3) Go to SE37 and do a "single test" for the function module RSDU_CHECK_SECONDARY_INDEXES. Use the infocube's technical name (e.g. 0BWTC_C01) as the input parameter and 'X' for both, the I_COMPLETE_CHECK and I_WITH_AGGREGATES, parameters. Press F8 to run the module. Only the C_T_INDEX output parameter is relevant. It shows a list of indexes. Check the TYPE and STATUS columns. These should show 'BITMAP' and 'VALID' respectively.
For BW 2.0A systems (all DB-platforms):
For checking secondary indexes on individual infocubes the following methods can be applied, similar to the BW 1.2B solution:
           (1) Go to the Admin Workbench. Go to the infocube. Click the right mouse button and choose "Manage". Choose the tabstrip "Performance". This leads you to a screen that shows the state of those indexes via traffic light semantics. There are also buttons to repair inconsitent states of the (secondary) indexes.
           (2) same as (2) for BW 1.2B.
           (3) Go to SE37 and do a "single test" for the function module RSDU_INFOCUBE_INDEXES_CHECK. Use the infocube's technical name (e.g. 0BWTC_C01) as the input parameter, leave the I_FACTTAB initial, use 'X' for both, the I_COMPLETE_CHECK and I_WITH_AGGREGATES, parameters and use 'U' in the I_DOUBLE_FACTTAB parameter. Press F8 to run the module. Only the C_T_INDEX output parameter is relevant. It shows a list of indexes. Check the TYPE_CHECK, UNIQUE_CHECK, PARTITIONED_CHECK and STATUS_CHECK columns. These should show 'G' (= "green" = ok) respectively.
If your BW 2.0A system is on patch level 11 Make DB02 consistent by running the report SAP_UPDATE_DBDIFF (via SE38), go to DB02 and press the "Refresh" button in order to synchronise the information in DB02 with the DBDIFF table. This should provide you with a consistent view.
For BW 2.0B and BW 2.1C systems (all DB-platforms):
DB02 should work consistently in BW 2.0B / BW 2.1C with infocubes created in 2.0B / BW 2.1C. If you wish, you can still use the BW 2.0A approach. For infocubes that were created in BW 2.0A or BW 1.2 you need to adjust the index setup (on the facttables) by running the report SAP_INFOCUBE_INDEXES_REPAIR. The latter is available from BW 2.0B patch 3 onwards. It should be run in a background process as it might take a while to run through.
You also might want to run the report SAP_UPDATE_DBDIFF once in order to update the table DBDIFF that lists database objects whose data dictionary setting do not correspond to the actual setup and that should therefore be omitted in DB02 checks.
Source code corrections

Missing Index in DB02

Hi,
When I go to DB02->Diagnostics->Missing Tables and Indexes in our ECC6 system.
I see some missing primary and secondry indexes there.I also see option " Create on Db" there.
Please suggest should I create such indexes by option "Create in Db" and also suggest how SAP find out such missing indexes in Database,,, Does CheckkDB or Update stats provide this information to SAP.
Please confirm.
Regards,
Shivam

>
Shivam Mittal wrote:
> Hi,
>
> When I go to DB02->Diagnostics->Missing Tables and Indexes in our ECC6 system.
>
> I see some missing primary and secondry indexes there.I also see option " Create on Db" there.
>
> Please suggest should I create such indexes by option "Create in Db" and also suggest how SAP find out such missing indexes in Database,,, Does CheckkDB or Update stats provide this information to SAP.
>
> Please confirm.
>
> Regards,
>
> Shivam
Yes you can create them on DB.
SAP doesnt find out that information until and unless then login into ur system through saprouter.
Regards,
Nirmal.K

Way to find Missing table Index in SAP ?

Hi All,
Is there any way to check missing tables index in SAP?
and also DB size ? and reorganize the index and tables?
Cheers
Usman

Hi Usman,
Transaction SE14, DB02 .. program to reorganize the index and tables .. Report RSSDBREO 
Db Size :Tr.DB02 Perform DB Check and you will get the size.
Or you can check on your database server sap data files systems. so you will know gross size of your DB.
Thanks
Saquib Khan
Message was edited by: Saquib Khan

Missing Tables and Indexes greyed out in DBACOCKPIT

Hi All,
I use Solution Manager 7.01 with MS SQL Server 2008 DB.
I want to monitor with DBACOCKPIT a MS SQL Server 2005 DataBase of a SAP BPC 5.1.
I connected the DB but in DBACOCKPIT some functionality are greyed out.
I want to use in Diagnostics section the "MISSING TABLES AND INDEXES" function but this command is greyed out.
Is it possible to use this function?
Please, help me!
Regards,
Alessandro

Hi,
Gray color means that screen is disabled for any reason (authorization, SQL Server release, monitoring remote, etc).
I believe, those items cannot be monitored unless these limitations are sorted out.
Please refer to the Document "The SAP DBA Cockpit for Microsoft SQL Server" in SDN.
You can get the status about the restriction in the bottom of dbacockpit screen.
Thanks,
Jagan
Edited by: jagadheeshan govindasamy on Sep 16, 2009 1:03 PM

Missing tables in a full=y expdp

Hello !
There are missing tables in an expdp dump of a database we use in a test environnement.
I don't know why ...
The datafile seems not to be corrupted. The table is listed in a tool like TOAD, and is listed in the catalog view DBA_TABLES.
But the expdp logs doesn't list this table while listing other tables from the same user.
If i try to expdp only a table of these (a missing table in the dumpfile), i get a 39166 Object not found error.
The Oracle Database version is 10.2.0.4.0 and the command line we use is :
expdp "'SYSTEM/manager@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<ip_address>)(PORT=<port>))(CONNECT_DATA=(SID=<oracle_sid>)))'" SCHEMAS=OWNER DIRECTORY=DIR_DP DUMPFILE=dumpfile.dmp FULL=y
What did i miss ?
On a structure-like database on a second test environnement the tables are expdp regularly ...
Thank's for your answers !
Steve.

966918 wrote:
Hello !
There are missing tables in an expdp dump of a database we use in a test environnement.
I don't know why ...
The datafile seems not to be corrupted. The table is listed in a tool like TOAD, and is listed in the catalog view DBA_TABLES.
But the expdp logs doesn't list this table while listing other tables from the same user.
If i try to expdp only a table of these (a missing table in the dumpfile), i get a 39166 Object not found error.
which schema owns the "missing" object?

Missing table K9RDEV3000001

Hi, I posted this last night, many of you may not have seen it! Please assist.
Hello experts, how are you? I have a program that is not working as a result of a missing table K9RDEV3000001, could anyone help with the possible location or definition on the table, or structure.
Thank you
Tatenda Chaibva
null

This looks like one of the tables generated in CO module. I don't know much about CO but I've noticed that when u change come config in CO - create some rules I guess - the tables containing those rules are generated dynamically, when u change the rules such tables may be deleted and created with different name.

Missing table begin XSL context for: ?end if?

I have 8 if clauses with grouping sub grouping data shown.
when I try to validate my RTF file I am getting following error msg:
[061112_073853972][][ERROR] [Line 3322.83] Missing table begin XSL context for: <?end if?>
[061112_073854018][][ERROR] [Line 3624.134] Missing table begin XSL context for: <?end if?>
[061112_073854050][][ERROR] [Line 3878.184] Missing table begin XSL context for: <?end if?>
[061112_073854081][][ERROR] [Line 4203.183] Missing table begin XSL context for: <?end if?>
[061112_073854112][][ERROR] [Line 4479.134] Missing table begin XSL context for: <?end if?>
[061112_073854143][][ERROR] [Line 4870.182] Missing table begin XSL context for: <?end if?>
[061112_073854190][][ERROR] [Line 5201.182] Missing table begin XSL context for: <?end if?>
I have check each and every <?if:...?> clasue and it's corresponding <?end if?> clause

Issue has be identified:
It was a end of group statement after the structure of table.
all of <?end for-each-group?> end tage should be in a table and only if (open and close) statement should group them.

Missing table T043S

Dear
          Experts,
          Here I am posting outgoing payment with clearing t code F-07,
it gives the Error
The entry (company code) missing table T043S,
Please Give ur reply ASAP.
with regards
Sukeerthi

Hello Sukeerthi ,
This error comes only because of the tolerance group, when this is not updated then this will come
so check the Tcode : OBA0 (put the company code and the tolerance group) - This is for G/L accounts
                                   OBA3(put the company code and the tolerance group) - This is for customer/vendor
                                   OBA4(put the company code amt per doc and amt per open item) - This is for FI tolerance group for users.
I think this will definately help you.
Regards
Urmila S.

Missing Tables and Indexes

Hi all,
we have checked "missing table and indexs" status with DBACOCKPIT and there it show 362 Indexes are not created.
all are the standard table indexes.
we have updated the indexes and statistics with BRCONNECT also.and its complited successfully.after this also "it show 362 Indexes are not created". we are using SOLARIS OS and oracle database.
Can anybody help me out how to rebuilt the missing indexes .....plz mention the steps.
Thanks,
Rableen khurana

Hi,
Refer to the note and lins on how to fix it
Note 1320008 - DBA Cockpit: Selection in "Missing Tables and Indexes"
http://wiki.sdn.sap.com/wiki/display/TechTSG/(DB)IndexReportedasMissing
http://help.sap.com/saphelp_nwpi711/helpdata/en/33/5b277b8b0745b8b60e67ca04c77ebb/content.htm
Thanks,
Arjun

While posting f-53 i getting error missing table T043G

Hi
while posting F-53 i getting error "company code" is Missing table T043G.
What can i do for this.. can u advise this.
Thank u
anil

hi anil,
you are not given the tolerance group for customers/vendors, give the tolerance group for the same and try it.
also give the gl tolerance,
try t.codes oba0, oba3
pls award points.
Raghav

Export Missing table on 11GR2 ?

I'm observing this mystery on our 11.2.0.1.0 system running under Solaris about mysterious missing tables that really exist on the database.
Here is the log of my session trying to export an existing table and export cant seem to find it .
-bash-3.00$ . oraenv
ORACLE_SID = [oracle] ? HR90
The Oracle base for ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome01 is /u01/app/oracle
-bash-3.00$ sqlplus system
SQL*Plus: Release 11.2.0.1.0 Production on Thu Sep 9 11:35:43 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
SQL> set lines 200
SQL> column object_name format a30
SQL> select object_name,owner,object_type
2 from dba_objects
3 where object_name = 'PSCLASSDEL' ;
OBJECT_NAME OWNER OBJECT_TYPE
PSCLASSDEL PUBLIC SYNONYM
PSCLASSDEL SYSADM TABLE
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
-bash-3.00$
exp sysadm tables=PSCLASSDEL file=PSCLASSDEL.dmp
Export: Release 11.2.0.1.0 - Production on Thu Sep 9 11:41:51 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Password:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
EXP-00011: SYSADM.PSCLASSDEL does not exist
Export terminated successfully with warnings.
Even a full export of the schema does not include these "missing" table at all.
Has anyone encounteed this on 11gR2
Thanks.

Thanks . This seems to be a new parameter in 11gR2 . It just got me by surprise that Oracle set it to true by default changing the old behaviour . Inserting records is really not an option but there are modules in the system that does check these table's existence after an import restore. I'm going to be using expdp to get these tabs back. Anyway all seems well . Thanks to all who responded.Have a great day .
Edited by: jodsum on Sep 9, 2010 12:36 PM

Missing tables in DB02

Similar Messages

Maybe you are looking for