Missing tables in the Table tree
I installed SQL developer version 1.5.0.52 and I noticed that some of the tables that should be showed in the tree were missing. Although I can see these tables writing a command :
Select * from user_tables where table_name like 'AQUA%'
Also, I can use these tables in queries and the 'Find DB Object' find them but these tables are not showed in the tree. The owner has more then 600 tables and I didn't notice a problem like this in previous versions of SQL Developer.
Has somebody any idea about?
Thank you
I am also experiencing the same issue, although no tables / views / indexes / triggers are displayed in the object tree for any of my connections.
I am using verison 1.2.1. Will downloading version 1.5.0.52 fix this issue? Thank You
Similar Messages
-
Missing Tables and Indexes greyed out in DBACOCKPIT
Hi All,
I use Solution Manager 7.01 with MS SQL Server 2008 DB.
I want to monitor with DBACOCKPIT a MS SQL Server 2005 DataBase of a SAP BPC 5.1.
I connected the DB but in DBACOCKPIT some functionality are greyed out.
I want to use in Diagnostics section the "MISSING TABLES AND INDEXES" function but this command is greyed out.
Is it possible to use this function?
Please, help me!
Regards,
AlessandroHi,
Gray color means that screen is disabled for any reason (authorization, SQL Server release, monitoring remote, etc).
I believe, those items cannot be monitored unless these limitations are sorted out.
Please refer to the Document "The SAP DBA Cockpit for Microsoft SQL Server" in SDN.
You can get the status about the restriction in the bottom of dbacockpit screen.
Thanks,
Jagan
Edited by: jagadheeshan govindasamy on Sep 16, 2009 1:03 PM -
Missing Tables and Indexes in 3.5
Hi,
when i am executing Tcode DB02 then under Missing Tables and Indexes i find 35 Indexes as not created.
can anybody tell me what does that signify. is this a issue if so how to fix it.
Indexes not created
ADCP-I04
ADCP-I03
ADCP-I02
ADCP-I01
ADCPS-I01
ADCPS-I02
ADCPS-I03
ADCPS-I04
ADRC-I14
ADRC-I11
ADRC-I05
ADRC-I02
ADRC-G
ADRP-I01
ADRP-I02
ADRP-I03
ADRP-I04
ADRP-I07
ADRP-I08
ADRP-I09
ADRV-I01
BUT000-PER
CDHDR-001
CDHDR-002
CRMD_ORDERADM_I-PKI
CRMD_ORDERADM_I-DES
ISSUE_RELATION-001
NAST-ADQ
RMPS_T_RESUB-RAG
RMPS_T_RESUB-RCU
SSPICSPRHD-S02
SSPICSTRHEAD-S01
SSPICSTRPL-FLD
STXH-TDN
SWBRULECOM-RSY
RakeshHi Rakesh,
First thing this is not an issue but an information that says that these indexes are not be created in the System.
This option Indexes not created is an SAP table maintained from Dev to Prod just to indicate that these indexes cannot be created.
That's the reason why u have a green mark beside them and this will make clear for you that this is not an issue.
Hope it helps!!!!
Thanks & Regards,
Neelesh Jain. -
Hi SAP Gurus,
on our SAP NetWeaver 7.x BW (based on AIX/Oracle) I find via transaction DB02 (path = Diagnostics => Missing Tables and Indexes) under "Unknown objects in ABAP Dictionary" under DB views a BW object /BI0/.....
When I make a double click on the object, I am getting the popup window "Display not possible for this object":
How can I identify the object and clarify with the BW application expert, if needed, how to resolve this object?
I searched already via RSA1 for the object, but I wasn't able to find anything so far ...
Thanks for your help and ideas.
Best regards
CarlosHello Carlos
The database view in question is a temporary database object created during a query execution.
Please read this SAP note 449891 - Temporary database objects in BW 3.x to understand what that view is all about and impact if those views are removed.
The SAP notes 449891 and 1139396 suggests to run the report SAP_DROP_TMPTABLES to drop these temporary objects. Whether the objects are still required or not is a question to be put across to the BW team. If the temporary objects are removed when they are used by a query, then the query will fail.
Have a nice day
RB -
Missing tables in a full=y expdp
Hello !
There are missing tables in an expdp dump of a database we use in a test environnement.
I don't know why ...
The datafile seems not to be corrupted. The table is listed in a tool like TOAD, and is listed in the catalog view DBA_TABLES.
But the expdp logs doesn't list this table while listing other tables from the same user.
If i try to expdp only a table of these (a missing table in the dumpfile), i get a 39166 Object not found error.
The Oracle Database version is 10.2.0.4.0 and the command line we use is :
expdp "'SYSTEM/manager@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<ip_address>)(PORT=<port>))(CONNECT_DATA=(SID=<oracle_sid>)))'" SCHEMAS=OWNER DIRECTORY=DIR_DP DUMPFILE=dumpfile.dmp FULL=y
What did i miss ?
On a structure-like database on a second test environnement the tables are expdp regularly ...
Thank's for your answers !
Steve.966918 wrote:
Hello !
There are missing tables in an expdp dump of a database we use in a test environnement.
I don't know why ...
The datafile seems not to be corrupted. The table is listed in a tool like TOAD, and is listed in the catalog view DBA_TABLES.
But the expdp logs doesn't list this table while listing other tables from the same user.
If i try to expdp only a table of these (a missing table in the dumpfile), i get a 39166 Object not found error.
which schema owns the "missing" object? -
Hi, I posted this last night, many of you may not have seen it! Please assist.
Hello experts, how are you? I have a program that is not working as a result of a missing table <b>K9RDEV3000001</b>, could anyone help with the possible location or definition on the table, or structure.
Thank you
Tatenda Chaibva
nullThis looks like one of the tables generated in CO module. I don't know much about CO but I've noticed that when u change come config in CO - create some rules I guess - the tables containing those rules are generated dynamically, when u change the rules such tables may be deleted and created with different name.
-
Missing table begin XSL context for: ?end if?
I have 8 if clauses with grouping sub grouping data shown.
when I try to validate my RTF file I am getting following error msg:
[061112_073853972][][ERROR] [Line 3322.83] Missing table begin XSL context for: <?end if?>
[061112_073854018][][ERROR] [Line 3624.134] Missing table begin XSL context for: <?end if?>
[061112_073854050][][ERROR] [Line 3878.184] Missing table begin XSL context for: <?end if?>
[061112_073854081][][ERROR] [Line 4203.183] Missing table begin XSL context for: <?end if?>
[061112_073854112][][ERROR] [Line 4479.134] Missing table begin XSL context for: <?end if?>
[061112_073854143][][ERROR] [Line 4870.182] Missing table begin XSL context for: <?end if?>
[061112_073854190][][ERROR] [Line 5201.182] Missing table begin XSL context for: <?end if?>
I have check each and every <?if:...?> clasue and it's corresponding <?end if?> clauseIssue has be identified:
It was a end of group statement after the structure of table.
all of <?end for-each-group?> end tage should be in a table and only if (open and close) statement should group them. -
Dear
Experts,
Here I am posting outgoing payment with clearing t code F-07,
it gives the Error
The entry (company code) missing table T043S,
Please Give ur reply ASAP.
with regards
SukeerthiHello Sukeerthi ,
This error comes only because of the tolerance group, when this is not updated then this will come
so check the Tcode : OBA0 (put the company code and the tolerance group) - This is for G/L accounts
OBA3(put the company code and the tolerance group) - This is for customer/vendor
OBA4(put the company code amt per doc and amt per open item) - This is for FI tolerance group for users.
I think this will definately help you.
Regards
Urmila S. -
Hi SAP Gurus,
I noticed on our SAP business warehouse (BW) system (NetWeaver 7.0 based on AIX/Oracle 11g) in transaction DB02 => Diagnostics => Missing Tables and Indexes under Secondary indexes, 26 indexes, in package $tmp:
The indexes are defined, but they don't have been created on the database.
When I try to create them via the database tool, I am getting the warning:
Does the warning raise up, because they where defined in the $tmp package?
I was looking in SAP notes for a solution for this "warning" concerning the /BIC/F-Indexes but I didn't found yet anything helpful ...
Thanks for your help and ideas ...
Best regards
CarlosHi Carlos,
These are secondary indexes created during process chains in BI to improvise performance.
You may refer below SCN blogs on creation of these indices in BI.
Secondary Index - Improving DSO insert/read performance
How to Create Secondary Index on DSO in SAP BW
Hope this helps.
Regards,
Deepak Kori -
Hi all,
we have checked "missing table and indexs" status with DBACOCKPIT and there it show 362 Indexes are not created.
all are the standard table indexes.
we have updated the indexes and statistics with BRCONNECT also.and its complited successfully.after this also "it show 362 Indexes are not created". we are using SOLARIS OS and oracle database.
Can anybody help me out how to rebuilt the missing indexes .....plz mention the steps.
Thanks,
Rableen khuranaHi,
Refer to the note and lins on how to fix it
Note 1320008 - DBA Cockpit: Selection in "Missing Tables and Indexes"
http://wiki.sdn.sap.com/wiki/display/TechTSG/(DB)IndexReportedasMissing
http://help.sap.com/saphelp_nwpi711/helpdata/en/33/5b277b8b0745b8b60e67ca04c77ebb/content.htm
Thanks,
Arjun -
While posting f-53 i getting error missing table T043G
Hi
while posting F-53 i getting error "company code" is Missing table T043G.
What can i do for this.. can u advise this.
Thank u
anilhi anil,
you are not given the tolerance group for customers/vendors, give the tolerance group for the same and try it.
also give the gl tolerance,
try t.codes oba0, oba3
pls award points.
Raghav -
Hi All,
Please help me to create table tree in struts.
Please see the below example.
+----Parent 50 20
|___Child1 40 10
|___Child2 30 33java_jamboree wrote:
mind blowing i did not know Struts provides the UI framework to create widgets:-) you've been here too long, the sarcasm's beginning to rub off on you! -
Way to find Missing table Index in SAP ?
Hi All,
Is there any way to check missing tables index in SAP?
and also DB size ? and reorganize the index and tables?
Cheers
UsmanHi Usman,
Transaction <b>SE14, DB02</b> .. program to reorganize the index and tables .. <b>Report RSSDBREO </b>
Db Size :<b>Tr.DB02</b> Perform DB Check and you will get the size.
Or you can check on your database server sap data files systems. so you will know gross size of your DB.
Thanks
Saquib Khan
Message was edited by: Saquib Khan -
Export Missing table on 11GR2 ?
I'm observing this mystery on our 11.2.0.1.0 system running under Solaris about mysterious missing tables that really exist on the database.
Here is the log of my session trying to export an existing table and export cant seem to find it .
-bash-3.00$ . oraenv
ORACLE_SID = [oracle] ? HR90
The Oracle base for ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome01 is /u01/app/oracle
-bash-3.00$ sqlplus system
SQL*Plus: Release 11.2.0.1.0 Production on Thu Sep 9 11:35:43 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
SQL> set lines 200
SQL> column object_name format a30
SQL> select object_name,owner,object_type
2 from dba_objects
3 where object_name = 'PSCLASSDEL' ;
OBJECT_NAME OWNER OBJECT_TYPE
PSCLASSDEL PUBLIC SYNONYM
PSCLASSDEL SYSADM TABLE
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
-bash-3.00$
exp sysadm tables=PSCLASSDEL file=PSCLASSDEL.dmp
Export: Release 11.2.0.1.0 - Production on Thu Sep 9 11:41:51 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Password:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
EXP-00011: SYSADM.PSCLASSDEL does not exist
Export terminated successfully with warnings.
Even a full export of the schema does not include these "missing" table at all.
Has anyone encounteed this on 11gR2
Thanks.Thanks . This seems to be a new parameter in 11gR2 . It just got me by surprise that Oracle set it to true by default changing the old behaviour . Inserting records is really not an option but there are modules in the system that does check these table's existence after an import restore. I'm going to be using expdp to get these tabs back. Anyway all seems well . Thanks to all who responded.Have a great day .
Edited by: jodsum on Sep 9, 2010 12:36 PM -
Hi Gurus,
In DB02 / Diagnostics displays that following tables are missing:
- ORA_COCKPIT_HELPER
- SFHOT
- T77TNM_IFPROPS
- YINFTOOL
I found some sap notes how to solve the issue, but was not able to.
1. What are these tables.
2. Do I need them, if NOT which tables can be deleted, and how exactly
3. Required tables ho can I create them
Pl. give exact instructions
- ZZCON_TEMP (Tried to delete in SE14 / SE11) could not delete.
Pl. advse how to solve the issue, thanks for your help in advance.
sahmadTransaction DB02 reports a data inconsistency between the database and the ABAP Dictionary:
1) ORA_COCKPIT_HELPER: Read note Note 1374746 - DBA Cockpit: Temporary table ORA_COCKPIT_HELPER it says how to create the missing table ORA_COCKPIT_HELPER
Goto your SQL prompt and the commmand as per note
SQL>create global temporary table ora_cockpit_helper as
select * from ( <p_sql_stmt_text> ) where 1=0
It was just not get created for SAP dictionary. Simple create it....
2) SFHOT: is defined in the ABAP Dictionary as a cluster table and was accidentally created in the database in a previous release. Check that the table is correctly defined in R/3. To do this, you can activate the table in transaction SE11. If this can be done without any errors, the table can be deleted from the database. Use database tools to do this. Read how to go for it from SAPnote :33814
3)T77TNM_IFPROPS: The customizing table T77TNM_IFPROPS only exists in release 4.70 as stated in note 1130425; hence during an upgrade from this release, you might notice that the table and the runtime objects exist without the DDIC reference. Follow as "Note 1396592 - Table T77TNM_IFPROPS - Upgrade discrepancies" says ...
No idea about your fourth table....
all the best !
Maybe you are looking for
-
my c d wont do anything HL-DT-ST DVDRW GS23N: Firmware Revision: SB03 Interconnect: ATAPI Burn Support: Yes (Apple Shipping Drive) Cache: 2048 KB Reads DVD: Yes CD-Write: -R, -RW DV
-
Importing Word 2003 docs into RH7 HTML
I imported Word 2003 docs into RH7 for HTML and they looked fine in the WYSIWYG window. However, when I preview the topics in the Browser, I get HTML code for a dash, quotes and other characters. It is an incredibly tedious process to try to search a
-
I've tried installing both Linux Mint and Ubuntu on my computer, but no matter what I try I have the same problem. I boot to the DVD or USB containing Linux, and the menu allowing me to choose what to do pops up just fine. I can pick if I want to boo
-
Cannot open multiple firefox windows
The problem is I cannot open multiple firefox windows at 1 time. It keeps saying that firefox is running or it just spins on the 2nd time that we press on the firefox icon every time I do this. Can you please come up with a solution. Yes we can open
-
IOS 5.0.1 has killed my battery life
My battery life was just fine with iOS 5.0, but the annoying little notification to update my iphone annoyed me enough to do it... now my battery life is literally draining before my eyes and I have every feature turned off, min brightness and its on