Missing Tabs?

Last night for unknown reasons, Safari froze and exited the program. In a nutshell, I was having internet issues. Not wanting to be bothered by it last night, I shut down the MacBook.
Today when I went back to it, Safari opened and now I am missing the tab bar that lets me open multiple webpages at a time. (Note: not my bookmark bar, the bar that usually sits below it). I've tried playing around to get it back, but no luck.
Can anybody offer suggestions as to how I can get this useful tool back? Thanks in advance!

Nevermind, I figured it out. Thanks.

Similar Messages

In iOS 7.0.2 All and Missed tabs are not showing call history correctly

In iOS 7.0.2 All and Missed tabs are not showing call history correctly, I have iPhone 4 running iOS 7.0.2 version it looks like there is a bug. Missed call history and All calls (incoming, outgoing and missed) history is not showing properly in a list. Ideally when I click on missed it should show me recent missed call list and when I click on All it should show me (incoming, outgoing and missed) calls list sorted by current date and time.
I would like to request Apple developer team to look into this and fix this bug asap. Thanks in advance.

Hello gnutellabrot
Start with the article below to troubleshoot issues with email not sending and downloading to your iPhone.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Missing tab in icon editor

I'm pretty sure I'm missing a tab in my icon editor...
Can anybody tell me where my missing tab (forgot the name of it) has been gone to?
Furthermore I can't synchronize with the NI icon library.
The problems occured today for the first time. After I tried to synchronize with the NI icon library... So I guess it must be kind of related...
Any thoughts?
Just to be clear... I don't have any debug info since the icon editor does not give me any
Solved!
Go to Solution.

You're missing the layers tab. Click layers--> show layers page.

Federated portal network - missing tab on consumer role

Hi,
We're on EP 7.01, SP4, and on two occantions we've had problems with missing tabs on a consumer role in our federated portal network setup. An entire workset on both occations is missing from the RDL-shared role. In the two cases the problem has been observed on different roles with two different worksets. When analyzing the RDL-shared roles, the producer role is fine but the consumer role is simply missing the attached workset. If the role is copied to the consumer again, the workset is still missing.
A full synchronization solves the problem.
The RDL-mechanism has been running fine for over half a year, so its quit odd that we now experience this issue.
Has anyone else experienced anything similar?
Kind regards,
Rasmus

Hi Rasmus,
Is your consumer portal required High Availability? A scheduled re-bounce of the instance should help (weekly, monthly, etc.) as a preventive measure. Maybe you can observe to see how long does it take before the problem comes back (after a full cache refreshed) and then schedule your re-bounce accordingly. As much as we try to do our best, "things" happen
Or, you can adjust your cache settings (e.g. reduce the maxValidityPeriodInSecond property) to avoid the problem.
http://help.sap.com/saphelp_nw70/helpdata/EN/5b/9f2d4293825333e10000000a155106/frameset.htm
According to the following link, the cache stores only semantic objects (iViews, pages, layouts and roles); since worksets are not semantic objects, could that be why?!
http://help.sap.com/saphelp_nw70/helpdata/EN/5b/9f2d4293825333e10000000a155106/frameset.htm
Regards,
Dao

The missing tab in nvidia diplay properties

can anyone remind me how to open the missing tab in nvidia display properties (the tab that's used for overclocking). i've done it, several months ago, but now i forgot... how stupid am i right ;(

Spyghost,
Set your desktop resolution to 16Bit and remove any files you have on your desktop.
No need for you to keep rendoring your desktop in the background while playing a game.
Then in the settings I would do these tweaks:
Performance & Quality Settings
Performance - Aggressive
Antiailiacing - Off
Anisotropic Filters - Off
Direct3D Settings
Enable Fog Table Emulation - On
Mipmap Detail Level - Best Performance
More Direct3D
Vertical Sync Mode - Always Off
Render no more than - 5 Frames Ahead
OpenGL Settings
Default Color Depth - Use Desktop Color Depth
Buffer-Flipping Mode - Auto-Select
Vertical Sync - Off by Default
As for the overclocking section, you can use it at your own risk. For now run without overclocking.
Take Care,
Richard

[svn] 3200: missing tab in asdoc @param scan.

Revision: 3200
Author: [email protected]
Date: 2008-09-12 15:10:46 -0700 (Fri, 12 Sep 2008)
Log Message:
missing tab in asdoc @param scan. Fixed.
Tests: checkintests, asc-tests
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/Scanner.java

@Allan: The selinux-flex package is needed as part of the installation process.
Something tells me that this AUR package needs to be updated.
But yes, a solution appears to be to remove selinux-flex and install flex and then compile checkpolicy.
Last edited by clfarron4 (2014-11-12 12:36:42)

SPSS, missing tabs when installed

Hi,
I ve been struggling with the SPSS installation, it works fine in my other computer.
But when i install it on my mac, there are many missing tabs, for instance in Analysis, i can't find regression or descriptive statistiques or correlation and many other important elements.
I m traveling and cant take my other computer.
Please help!!
I ve tried installing it many time and tried many versions, but no results.
Thank you,

I've never tried it - I don't like the default theme. But my dad has encountered the same problem once or twice, and he uses the default theme (he has a Windows 7 desktop; not sure what version of FF).

Only 1 database in my OEM Console list has missing tabs

11.1.0.1 of the OEM Grid Server is installed
I have 20 databases listed.
All databases except one look just fine. The one database is missing the Performance Availability Server Schema Data Movement Software and Support tabs on it's main page.
I saw a Metalink article that indicates I did not use the correct version of OPatch to install the patch but the host on which this database resides has a second database that is showing up correctly in my OEM Console. The same version of OPatch was used to patch both databases and if the Metalink article is talking about the OPatch version used to patch the Agent, then why would one database on the host show up correctly in the OEM console with all the tabs but a second database does not? So I don't think it's OEM agent patching.
Any ideas what could cause only one database on a server to have missing links on the OEM main page?
Back end databases are 11.2.0.3 not that it matters.

Thanks randers4, but that didn't solve the issue. Basically, I need to find a way to wipe my iPhone's sync history. It is trying to sync the ghost files instead of the actual files. If I delete the actual files from iTunes and add them back in, it does sync them to my iPhone, but those ghost files are still in the sync list. Since I don't want to delete the files from iTunes and add back in, I would like to find a way to wipe that sync history. I did what you said as well as opting to not sync music at all, then re-checking the sync music and syncing all over again. Still, same issue.
So, does anyone know a way to get rid of that iPhone sync file so it can start fresh with a new sync list?

Use of 'Sub group text missing' tab in tcode ovt0/spro

Hi,
Can anybody please explain me what is the use of 'Subgroup text is missing' in tcode ovt0 . This tab is present in ECC 6.0 but not in 4.7.
The spro path for this is
sprosap referenceimglogistic generalbusinesspartner-customerscontroldefine account groups & field selection for customers d.click on groupd. click on company code data-d.click on W/holding tax data, w/h tax 2----
'Subgroup text is missing'.
Thanks in advance.

Hi,
subgroup is just listing the group fields available in the selected group.
In your case, it will list only
*W/hold.tax deduction,w/h tax 2
*Withholding tax code (2)
*Withholding tax number
*Withholding tax types
*Withholding tax country key
A double click on the "W/holding tax data, w/h tax 2" will do the same and show the field gruop settings
Hope this helps
Alain

Use of 'Subgroup text is missing' tab in ovt0/spro

Hi,
Can anybody please explain me what is the use of 'Subgroup text is missing' in tcode ovt0 . This tab is present in ECC 6.0 but not in 4.7.
The spro path for this is
sprosap referenceimglogistic generalbusinesspartner-customerscontroldefine account groups & field selection for    customers d.click on groupd. click on company code data-d.click on W/holding tax data, w/h tax 2----
'Subgroup text is missing'.
     Or else can anybody please provide me any info regarding the sap notes related to this .
Thanks in advance.
Edited by: Sakti Mishra on Oct 27, 2010 6:13 PM

Hi Sakti,
Kindly note that this error occurs when No fields are assigned to a group.
Therefore, with this clue you can check the corresponding table whether it contains the required field or not.
Also check the following SAP Note and see whether its releavnt in your case or not.
   62967 - Field status groups vendors (LSA)
Regards,
Abhishek

Search results web part error, missing tabs.

Hello,
I have a custom master page built from an html on Sharepoint Online.
I want to add a Search Results webpart on my page, but when I do it, I see that this webparts has missing options. I only have the first two, and are not even complete, I cannot swith between basic and advance query and I don't have the refinement, sorting,
test tabs..
Opening the developer tools for the popup, I see the following error.
Uncaught TypeError: Cannot read property 'add_resultRendered' of undefined on Search.configuration.js on line number 1.
The point is, that if I quit my masterpage and I put the seattle, the webparts works perfect. So I know that there is something missing on my masterpage, but I don't have a idea about what can be.
Any thoughts?
Many thanks,

Hi arcanedevice,
According to your description, my understanding is that the Search Result Web Part was not showing data for Anonymous Users.
The cause of this issues was due to security trimming. For resolving this issue, please do the followings:
Under the SharePoint Site go to Site Settings. Search -> Search and offline availability -> Indexing ASPX Page Content, Enable the option "Always index all Web Parts on this site"
Under Search Service Application, do a Full Crawl for the content source
More information, please refer to the link:
http://blogs.msdn.com/b/sowmyancs/archive/2010/07/16/sharepoint-2010-search-not-showing-any-results-for-anonymous-users.aspx
After the above, compare the result. If this issue still exists, please run the following PowerShell Script:
$web = get-spweb "http://yoursiteurl/subweb/subsubweb"
$list = $web.Lists["ListName"]
$list.BreakRoleInheritance($true)
$list.AnonymousPermMask = $list.AnonymousPermMask -bor ([int][Microsoft.SharePoint.SPBasePermissions]::ViewFormPages) #binary or adding the permissions
$list.Update()
More information, How to Make List Items Visible to Anonymous Users (in Search)
http://soerennielsen.wordpress.com/2012/05/29/how-to-make-list-items-visible-to-anonymous-users-in-search/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Missing tab in ME29N screen

hi,
i have created below thread in SAP NetWeaver Administrator, but no response, thought i posted it to wrong category.
https://forums.sdn.sap.com/click.jspa?searchID=15443307&messageID=6020795
i re-post the same question here, hope there is someone can help.
my user complained that tabs are missing in ME29N screen, I don't know how to bring back the tabs and how it can get missing.
as an interim solution, i just delete her ID and recreate and the tabs are back.
may i know what really control the tabs ? so that i don't have to delete and recreate the id.
comment and advice will be highly appreciated.
thanks
regards,
Kent

hi maia,
i'm the basis guy, that's why i just delete the id and recreate the same one with the same authorisation.
i'm not familiar with ME29N, so i'm not sure if there is any option where user had accidentally choose to close the tabs.
regards,
kent

Missing Tabs for "Attributes" in SOLAR01

Client is using SP17.
When using transaction SOLAR01, we do see only 1 tab (General) under Attributes. The rest, such as Comments, Link, History, Object, etc. do not appear.
Please advise why these might be missing and how i can get them back.
Thank you.

Sorry that is not what my issue is.
Within the Project or General Documentation Tab, when we create a document, attributes can be assigned in the Attributes section. In there, the remaining tabs are missing.

Apple mail preferences missing tabs

my preferences no longer have any of the tabs/buttons across the top of the window...
General' 'Accounts' 'Junk mail' 'Fonts/Colors' 'viewing' 'Composing' 'Signatures' 'Rules' are all missing.
where did they go?
Please help.

OMG I feel so stupid. haha
Thank you so much. But what happened? I never used that button.
Thanks so much for the quick response. That was driving me crazy.

Missing Tabs Panel/Indesign CS6

Hello. I just upgraded from CS4 to CS6 and resumed working on a book, only to find that there is no Tabs panel to be found anywhere (see attached jpg image). It's usually right under Paragraph in the Type Menu. It's also not in the Windows/Type Menu. I've been searching high and low around the program and on the internet and cannot find any clues. The Tabs instrutional videos on YouTube clearly show CS6 with a Tabs panel available in its traditional spot. I know this is bizarre and it's about to make me freak out because it seems like it should be pretty basic and obvious. Maybe it is and I'm missing a vital piece of info? If you have any ideas i sure would like to hear them...

Before the suggestions get made to re-install, a time consuming p.i.t.a. task for sure, do any users of InDesign 6 HAVE tabs in the drop down window?
Like ej5000 I do not have tabs in my drop down menus either. Steve I've trashed and restored my prefs so many times my head spins. Some afternoons it is literally all I get done. LITERALLY.
ej I think you were ont to something here
Hmmm, nothing else is working. This is so rediculous and it's taking up all my work day. I feel like the only solution is to semi-retire CS6, go back to CS4 and only use CS6 for importing .docx documents and exporting ePubs after I've preped them in CS4.
Peter's suggestion is the only way I am able to view my tabs pane.
...press Cmd + Shift + T?
MUCH easier and more time efficient than re-installing or needlessly/ceaselessly/endlessly deleting prefs. Since Adobe is constanly monitoring my activity and issuing updates this should get fixed on Adobe's end IMHO.

Activating Remote the missing tab iniTunes

Os10.10.1, iTunes 12.0.1, iPad 8.1.2
My iPad was connected to the mains supply and the Devices icon said two items, my iPhone and the iPad present. I searched in vain for the tab to allow entry of the four digit code to enable the Remote app to work.
Then without any prompting the Devices icon announced three items connected. Openig this I had iPhone, iPad and Remote clicking on the latter brought up the box to enter the four digit code and all was well.
Pkram.

In our case, this problem was due to mismatch between product key and server version. (problem description: "Remote Desktop" is missing from the Remote Tab in Computer Properties)
I had upgraded 2 servers with Windows 2008 R2 from Standard to Enterprise edition, and after a few weeks I could not RDP to these servers anymore.
The problem was solved be re-entering a correct product key for Windows, and re-activating Windows (+reboot).
Here's how to do it:
cscript c:\windows\system32\slmgr.vbs -ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (to change the product key; replace XXX by your product key)
cscript c:\windows\system32\slmgr.vbs /ATO (to re-activate Windows online)

Missing Tabs?

Similar Messages

Maybe you are looking for