Missing technical information on X200/X200s/X300 for final buying decision

Hello Thinkpad community,
I am planning to buy a thinkpad x200s, x200, x300 or x301 to replace my z61m.
Since I am missing some detailed technical information, it is hard for me to make this decision. Please help me to fill the gaps.
X200/X200s
My favourite is the x200s, since the main requirement is ultra mobility. To make it usable also on the outside of buildings, I am interested how bright is the display
1.) Candela / nit of X200s?
2.) Candela / nit of X200?
However, I want to use the notebook when I am at home as desktop system with a dual Monitor setup, too.
3.) Does the x200 / x200s with extension bay support dual monitor setup (one via vga, one via digital output)?
4.) If dual monitor setup is supported, what is the maximal supported resolution for two monitors?
5.) Is dual monitor setup supported with linux?
X300/X3001
Just in case the display / resolution of the X200s is two small (I will have to check it in real in a lenovo partner store if it will be available in Germany) for me I will switch to X300 / X301.
5.) Candela / nit of X300?
6.) Candela / nit of X301?
Dual Monitor support of X300 series?
7.) AFAIK, X300 supports only dual monitor in combination with this usb-docking station with NO linux support (window drivers needed). Is that true?
8.) AFIAK, the X3001 has dual display out on the notebook itself (vga and display port). Can thes ports be used in parallel fo dual monitor set up?
9.) If dual monitor setup is supported with X301 is it working in combination with linux?
64-Bit Operation System support
If I wouldn't have stumbled across this tread (http://forums.lenovo.com/lnv/board/message?board.id=X_Series_Thinkpads&thread.id=1485&view=by_date_a... I wouldn't dare to ask, thought it would be impossible because of the 32-Bit processors. Does the X200 / x200s support 64-Bit Operation systems? Especially Windows Server 2003 Standard Edition or SUSE / REDHAT X86_64 64BIT? Not that I would need it for office usage, however some servers (local development & testing on ultra mobile thinkpads rocks ) require this.
Thanks to your feedback! I am really eager to come to a decision, place the order and have a terrific ultra-mobile, but still desktop friendly notebook
BTW: Is there any technical document listing some or all of the information which I am missing? If yes, I cannot find it on the lenovo web site...
Thanks & Regards!
Kris
Solved!
Go to Solution.

welcome to the forum!
here are a few links which may help your research. the last link will give you specs on the various display panels among many other specs as well.
http://www.pc.ibm.com/us/thinkpad/tech_library.html
http://shop.lenovo.com/ISS_Static/merchandising/US/PDFs/x200_datasheet.pdf
http://shop.lenovo.com/ISS_Static/merchandising/US/PDFs/x300_USEN_00.pdf
http://shop.lenovo.com/ISS_Static/merchandising/US/PDFs/X301_Datasheet.pdf
ftp://ftp.software.ibm.com/pc/pcinstitute/psref/tabook.pdf
64-bit OSes are supported on all X300/X301 and X200/X200s models. server 2003 and 2008 are not officially supported but will run on the above equipment. there's a chance that not all drivers can be found however, especially for 2003. 2008 is much easier to implement since it registers with most drivers and apps as simply being vista with SP1 (since vista shares 2008's kernel).
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

Disable Technical Information for UI Element in WEB DYNPRO ABAP

Hi expert,
I want to disable Technical Information for UI Element in my web-dynpro application i am alredy disable in user setting by parameters WDDISABLEUSERPERSONALIZATION by i want to disbale other two options 1 Display quick help.
2 More field help.
KINDLY GIVE ME SUTIABLE SOULATION.
REGARD'S
Vikash

Hi Vikash,
Check this thread, may be you'll get some clues from here.
[How to restrict right click to show user setting in WebDynpro ALV?;.
Regards
Manas Dua

Website with lots of technical information for farmers

Hi,
I am wondering how to set this up - I have a site with lots of technical notes that I want to put up under 5 different categories. I want to include a search function so the customer can search for the info and it comes up. However I also want it to be very clear on the homepage that the site is a tool for farmers and they can see straight away that it is a resource site and easy to access info.
Should the articles be pages or an item in a web app? I haven't used webapps for along time so not really sure.
Any help would be greatly appreciated.
Thanks,
Tammy

Sure it's on this site www.sheepconnectsa.com.au under Technical Information, there isn't alot there atm but will be after I have redesigned the site.
Thanks for your help.
Cheers
Tammy
Sent from my iPhone

Requesting Technical Information for Message Body OIE_DIRECT_PAYMENT_TO_EMP

Requesting Technical Information on a Workflow Message Body
Workflow -> Credit Cards(Internal Name - APCCARD)
Process -> Payment to Employee(PAYMENT_TO_EMPLOYEE)
Notification -> Notification of Payment to Employee by Direct
Deposit(DD_PAYMENT_TO_EMP)
Message -> Notification of Payment to Employee by Direct Deposit (OIE)(OIE_DIRECT_PAYMENT_TO_EMP)
There is an enhancement request from our Client to add a Payment Date to the Notification
DD_PAYMENT_TO_EMP Body. But, if we look at the Worflow, both Text Body and HTML
Body of Message OIE_DIRECT_PAYMENT_TO_EMP is Empty.
Following are my questions:
1) Where exactly is this Body getting prepared and rendered ?
2) What are the technical components involved here ?
3) What is the Package.procedure if its a PLSQL or What is the CO/VO/Page name if its a OAF?

Thanks for the input Pillai.
Anyways, I had already tried your approach 1 of Item attribute PAYMENT_DATE to the message OIE_DIRECT_PAYMENT_TO_EMP, and setting a value to PAYMENT_DATE in the process before the Notification is sent out. But it did not work out.
In Approach 2, where do we set the notification body using OAF or PL/SQL ? which OAF page or which PLSQL package ? I have almost checked most of the AP Packages, but was unable to find.
Any other/more thoughts ?
Thanks
Ganganna

Industry Standard documentation for Technical Information related to Netweaver Portals

Hi.
I was hoping someone could point me in the right direction.
I want to create documentation related to our Netweaver Portals, but I want the documentation to be based on Industry Standards related to Netweaver Portals.
Information which I will include in this document, will include the following, but not limited to:
Naming Conventions
Folder Logic
Roles (How to create and use them)
Pages
Worksets
iViews
etc..
Does someone know of a template which I can use and alter to fit my requirements?

Hi Juandre,
There is not such template called Industry standard for NW portals.
Each firm have there own format and contents required by them .Objective of such documentation is to cover all the data points which can enable Technical support to provide necessary support for Portal environments.
Normally we include System landscape, URL details, OS details, Hardware details, DB details, SAP Portal technical details like version and patch level.
Business point of contacts,
SOP to start and stop systems
Known problems and resolutions
You may work out template based on above inputs.
Hope this helps.
Regards,
Deepak Kori

Java.rmi.ServerException: Missing port information

when i call the service ,i got the error:
run-test-client:
[java] java.rmi.ServerException: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingS
ender.java:382)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.
java:234)
[java] at sys.SetIF_Stub.getdeviceid(SetIF_Stub.java:68)
[java] at sys.StockPriceFetcher.getdeviceid(Unknown Source)
[java] at sys.TestPriceFetcher.main(Unknown Source)
what cause it??
in my SetImpl.java i use wurfltags.jar
//SetImpl.java
package sys;
import java.io.*;
import java.net.*;
import java.util.*;
import net.sourceforge.wurfl.wurflapi.*;
public class SetImpl implements SetIF {
     private String ret="";
private ProConf pc;
private MyObjectsManager mom;
     public SetImpl(){}
public String getdeviceid(String request)
String result="";
try{
mom=new MyObjectsManager();
mom.wurflWebInit();
UAManager uam =mom.getUAManagerInstance();
result=uam.getDeviceIDFromUA("MOT-T720/05.08.41R MIB/2.0 Profile/MIDP-1.0 Configuration/CLDC-1.0");
System.out.println(result);
catch(Exception e){}
return result;
and, i generate the wsdl file and deploy it successfully. but in the client
when i call the service it will be error.
the client code is:
/////////StockPriceFetcher.java
package sys;
import javax.xml.rpc.*;
import com.sun.xml.rpc.client.*;
public final class StockPriceFetcher {
public static final String getdeviceid(String req,String endpoint) {
String result="";
try {
SetIF_Stub stub =(SetIF_Stub)(new SystemConfiguration_Impl().getSetIFPort());
stub._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY,endpoint);
result = stub.getdeviceid(req);
} catch (Exception ex) {
ex.printStackTrace();
return result;
} // getLonNowItem
//////////////////////TestPriceTetcher.java
package sys;
import java.math.BigDecimal;
import java.util.*;
public class TestPriceFetcher {
public static void main(String[] args) {
try {
// String result=StockPriceFetcher.endsetinfo("ball=5&srv=7&pcode=500001","http://192.152.251.224:8080/jaxrpc-sys/jaxrpc");
String result=StockPriceFetcher.getdeviceid("ball=5&srv=7&pcode=500001","http://192.152.251.224:8080/jaxrpc-sys/jaxrpc");
System.out.println(result+"bb");
} catch (Exception ex) {
ex.printStackTrace();
when i run the testpricefetcher.java it will raise the above error infomation.
it spent 2 days for me to find the problem, but i cannot solve it.
i think it does matter with the wurfl package.because i doesnt use the method of the package in the SetImpl.java it will be ok. How to call the package?please give me a hand.

can you give me a hand!thank you

Java.rmi.ServerException: JAXRPCSERVLET28: Missing port information

Hi
We are getting errors when we run the webservice client..
With this we have also provided the webservice code.
Please any one help us to resolve this issue...
Thanks in advance.
We are using
J2EE 1.4
Error:
java.rmi.ServerException: JAXRPCSERVLET28: Missing port information
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.ja
va:510)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:307
at com.sun.xml.rpc.client.dii.CallInvokerImpl.doInvoke(CallInvokerImpl.j
ava:103)
at com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:492)
at com.sun.xml.rpc.client.dii.CallInvocationHandler.doCall(CallInvocatio
nHandler.java:121)
at com.sun.xml.rpc.client.dii.CallInvocationHandler.invoke(CallInvocatio
nHandler.java:85)
at $Proxy0.flowrequest(Unknown Source)
at dynamicproxy.MathClient.main(MathClient.java:52)
Web service Client Code:
package dynamicproxy;
import java.net.URL;
import javax.xml.rpc.Service;
import javax.xml.rpc.JAXRPCException;
import javax.xml.namespace.QName;
import javax.xml.rpc.ServiceFactory;
//import com.ibm.ctg.client.JavaGateway;
//import com.ibm.ctg.client.ECIRequest;
import dynamicproxy.*;
public class MathClient
static String message;
static String err=null;
     static StringBuffer sb = null;
     public String s1;
     public static int iValidationFailed = 0;
public static void main(String[] args)
try {
String nameSpaceUri = "urn:Foo";
String serviceName = "CtgService";
String portName = "MathFacePort";
// Specify the location of the WSDL file
URL url = new URL("http://localhost:8080/math-ctgservice/math?WSDL");
// Create an instance of service factory
ServiceFactory serviceFactory = ServiceFactory.newInstance();
// Create a service object to act as a factory for proxies.
Service mathService = serviceFactory.createService(url,
new QName(nameSpaceUri, serviceName));
// Create a proxy
dynamicproxy.MathFace
myProxy = (dynamicproxy.MathFace) mathService.getPort(new
                         QName(nameSpaceUri,
portName), dynamicproxy.MathFace.class);
// Invoke the add method
//System.out.println(myProxy.add(23, 12));
          //get the input value and pass it to the function
               String a = args[0]+"~"+"------------------------------------------------------------";
               //String a = b.toUpperCase();
               // Invoke the add method
               myProxy.flowrequest(a);
               System.out.println("Message:"+message);
     catch (Exception ex)
ex.printStackTrace();
}

As is so often the case, Google is your friend.
Googling for the exception message (JAXRPCSERVLET28: Missing port information) yields the following list.
http://www.google.com/search?hl=en&q=JAXRPCSERVLET28%3A+Missing+port+information&btnG=Google+Search
Follow the bouncing link, it will lead you to the solution.
PS.

Technical Information of Sap Business One

Hi,
i need some technical information about a possible installation of Sap Business One Package:
- Can Sap B1 run on a Microsoft cluster composer of virtual machine VMWARE?
- Can Sap B1 run on a machine with 64 bit technology?
- Can client Sap B1 run on Citrix with gateway access?
If nobody can help me, tell me where I can post this question...
Thank you
Regards
Marco

Hi Marco,
This is not the right forum for that question (SAP Support - or the Implemantation Forum in the Channel Partner Solutiuon Network may suit better...), but anway:
>- Can Sap B1 run on a Microsoft cluster composer of virtual machine VMWARE?
VMWare hasn't been released; it may work (and I heard about people using it ), but if a problem can actually be traced back being a VMWare issue - you are "alone"...
>- Can Sap B1 run on a machine with 64 bit technology?
Yes, please check the "Supported Platforms" information for B1 in the Channel Partner Portal on SAP Service Marketplace!
>- Can client Sap B1 run on Citrix with gateway access?
Not sue about "gateway access", but Citrix 4.0 (and 3.0) are officially supported.
You can find details at the same place as mentioned above (I don't have the link at hand, sorry).
HTH,
Frank

"Missing port information" and NoClassDefFoundError

I'm developing a Web Service using JWSPD1.2, and I'm having some problem in executing a client which accesses to the service I'm publishing.
On Client side the error is:
java.rmi.ServerException: Missing port information
at com.sun.xml.rpc.StreamingSender._send
On Server side (file $(JWSPD_HOME)/logs/launcher.server.log) I found out that the thrown exception is a NoClassDefFoundError.
The class that is not found, however, is included in a library that I'm linking on the command line, so I can't understand why this exception is thrown...
Has anyone of you been involved in a similar problem?
Perhaps I have to link the library somewhere else, but I don't know where...
Thanks in advance for your help!

Hi ! I am getting the same error at the client side :
java.rmi.ServerException: Missing port information
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:370)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:231)
at com.sun.xml.rpc.client.dii.CallInvokerImpl.doInvoke(CallInvokerImpl.java:56)
at com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:281)
at DIIClient.main(DIIClient.java:111)
can u just tell me how the problem was solved and what were the jar files u had set in the classpath. Pls help me i am new to webservices. Thanx in advance

What is "Missing Port Information" error?

Setting FINEST log level on JAXRPC in the AS8 2004Q04 Beta reveals nothing.
Searches on this forum provides only 3 matches for "Missing port information" (this one makes 4). In http://forum.java.sun.com/thread.jsp?forum=136&thread=508958 the same problem that I have is described, and the problem is left unresolved, despite a plea from a second user. ( I wonder what happened to these people...Did they sell short or become .NET developers. Neither are an answer for me. )
Searches in the bug parade shows that this error is generic: In 6157880, classpath was not set correctly. In 4859401, service used a J2SE 1.4 API in a 1.3 environment. In 4802443 there is a getter for a public field and so jaxrcp was confused. There are more bugs matching but I'm not listing them all here. My point is that there doesn't seem to be a single root cause for this problem.
So, logs don't help, forum doesn't have answer, bug parade is too noisy. This problem seems unresolved here on Sun's web pages, but here I try again:
Here are some questions:
1) What is "port information"?
2) From where is it missing? Where does AS8 expect to find it?
3) Anyone have a strategy on how to debug this?
I have Axis TCPMON tracing the soap messages and can verify that AS8 originates the error, not the client. The limited information from the server log verifies this too:
[#|2004-11-01T16:28:20.008-0500|SEVERE|sun-appserver-pe8.1|javax.enterprise.resource.webservices.rpc.server.http|_Thre
adID=11;|JAXRPCSERVLET22: no endpoint specified|#]Here is the output of a client that dumps the exception:
     [java] Endpoint address = http://Stratocaster:8080/ym/ym-alias
     [java] javax.xml.rpc.soap.SOAPFaultException: JAXRPCSERVLET28: Missing port information
     [java]     at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:515)
     [java]     at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:294)
     [java]     at svcp.XXXAPIR0501_Stub.create2(XXXAPIR0501_Stub.java:282)
     [java]     at SubClient.main(SubClient.java:31)

I believe I've gotten to the bottom of this error and will report it here in case there is anyone that is also having this problem and in case there is anyone that can make sense of it.
The alias and endpoint fields must be equal.
The deploy tool allows you to enter an alias and an endpoint for your web service. I'll show you the user interface specifics below. The data you enter in these fields show up in the wsdl, the web.xml and the sun-web.xml, and I'll show what elements below.
Except for the preceding '/' in the alias field (the '/' is inserted by deploytool), the alias and the endpoint string must be identical: if '/imp-alias' is the alias value, the endpoint must be 'imp-alias'.
If they are not equal and your client uses the alias value in endpoint address, you will get "Missing port information" error.
If they are not equal and your client uses the endpoint value in endpoint address, you will get '404 Not Found' error.
For example, lets say I set alias to 'api-alias' and endpoint to 'api-endpoint'. Using my browser, I can get the wsdl with http://localhost:8080/context/api-alias?wsdl (where context is also a value set in deploytool gui). The returned wsdl will show that the soap:adress location attribute is: http://localhost:8080/context/api-endpoint. If your client uses the wsdl to generate stubs, the default endpoint is this location and your client will get the '404 Not Found' error. If you client provides an endpoint address by setting the ENDPOINT_ADDRESS_PROPERTY to http://localhost:8080/context/api-alias, your client will get the "Missing port information" error.
You get to the alias and endpoint fields in deploytool from the File panel on the left. Open the subfolder that represents your war file. There will be your web service. Select the web service and the main panel will change to contain about 4-6 tabs. One tab labelled Aliases another tab labelled Endpoint.
The alias field shows up in the web.xml file like this:
<servlet-name>APIImpl</servlet-name>
<url-pattern>/api-alias</url-pattern>
</servlet-mapping>The endpoint field show up in the web.xml file under the same servlet-mapping element as alias:
<servlet-name>APIImpl</servlet-name>
<url-pattern>/api-endpoint/__container$publishing$subctx/*</url-pattern>
</servlet-mapping>The endpoint field shows up in the wsdl in the soap:address element's 'location' attribute:
      <soap:address location="http://localhost:8080/context/api-endpoint" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"/>The endpoint field shows up in the sun-web.xml file
<endpoint-address-uri>api-endpoint</endpoint-address-uri>John

Contact Sheet II setup page is missing layout information.

Where has the layout data gone in the Contact Sheet set up page? Is Photoshop trying to get rid of all useful tools throughout CS6?

Pete:
Below is the screen that I get initiating “Contact Sheet II.” I’m using Windows 7. In the area below below the “Reset” button it says, “Press the ESC key.....” it’s missing the information on total photos, number of pages, W: and H: information. I’ve always considered this information vital in laying out contact sheets.
On the second printed screen I’m running Windows Vista and Photoshop CS5. You should be able to see the difference. There is no “Load, Save and Reset” buttons.
Thank you for the opportunity to supply this information. If you have further questions please feel free to contact me.
Dave Cantrell
31255 Via Mariposa Court
Bonsall, CA 92003
(760) 726-8715
Photoshop CS6 Beta using Windows 7
Photoshop CS5 using Windows Vista

Missing File information

I was trying to make a smart folder to house all the pictures in certain folders that were less than a month old. A bunch of these pictures were taken earlier today. Anyway, The "Created" option wasn't showing anything for the past month and after poking around a bit, I realized by opening the picture file's information window that under "Date Created" it just said "--". I tried to figure out in preferences in the finder but you know how limited those options are. I may not really need to know how to write in missing file information. That would be a bit of a pain. I was wondering where the problem was coming from. Why would my iMac not put a date and time stamp in the file's info when I got it off my camera? I need to make my Mac start doing that.

Oh yeah. I forgot to mention that I tried "Date Modified" and it worked until I would open one of the files. Once they were closed and you went back to the folder, that file was gone. I'm not really sure why. I feel like there's a simple explanation for this and that I was missing something quite obvious. It's driving me nuts. I can't think of a reason that would happen. I tried everything time related. The key part of this is that I want the files to disappear once they are a certain age (I'm thinking about a month). Without that part of the equation, I don't really have a use for the folder at all. I was thinking for some reason that there was no way for a user to change anything in the file's information manually. The answer I think that would have to occur is to find a way to get my Mac to start stamping the date and time. The only reason I don't think it's the camera is that even if the camera didn't stamp the date and time, the OS should have when it came through. Oh yeah, this isn't a new camera and I have pictures from 3 to 4 months back that were successfully imported with the information. ALl the way back to the earliest image taken with this camera (and I've had this camera for a couple years!).

Missing port information

Hi all,
i am running a simple web service in JWSDP1.3 with tomcat server.When i am running the client application i am getting the output without any problem.Then i modified my server program with some oracle database connection.When i tried the same client program i am getting error.The error as follows:
java.rmi.ServerException: JAXRPC.JAXRPCSERVLET.28: Missing port information
Please help to fix this problem.I will be indebted for the same help.Thanks.

if your server connect to database and uses JDBC you must register your database in the system ODBC registry. I have the same problem and i resolve it in ths way.

Missing aperture information

Missing aperture information
This is only when i use my Leica M9 shooting in raw.
Strange as all information is ok/displayed for my Nikon raw pics.
I have checked 'Aperture' in EXIF checkbox.
Anybody have same problem or suggestion as to how to fix?

In the Web Album settings you will need to change the settings to upload "Optimized Image" in order to get metadata included in the images you upload to .mac.
You current settings only upload small JPEG versions of your images.
Please, note that the upload time will increase significantly when you change to "Optimized Images" since they are much larger.
Karsten

Missing contact information in iPhone

Hi there!
Using Windows 7 and Office 2007 with latest iTunes Version, I got the following:
Some of my contacts have a huge amount of different numbers, like WORK / HOME / WORK FAX / HOME FAX and a private cell next to a work cellphone.
On my iPhone I got nearly all contactdetails BUT I`m missing the "CAR" number (I used that for the work-cell.
Seems itunes is not syncing all information stored in Outlook. Is there a chance to get
a) information which details are synced and which not?
b) getting itunes to sync ALL such entries?
Thx for you help!
A very very iPhone newbie....!

I have a similar problem.
I have two iPhone 3Gs with iOS 4.0.1 which, when synching via iTunes on my iMac, do not synch a lot of the information in my contacts.
For example, I have a lot of information in my Notes field in Contacts. Only the first 4 lines, or thereabouts, synchcronises to the iPhone contacts. Same for both iPhones.
Is this an iOS4 issue?

Missing technical information on X200/X200s/X300 for final buying decision

Similar Messages

Maybe you are looking for