Missing template fonts

Hello
I am trying to create new documents in Pages (v.1.0.2) using the default templates and most give me a warning for "missing fonts". For example, Educational Newsletter is missing PrincetownLET and a couple others are missing Palatino-Roman. Are they supposed to come with the Pages package or do they have to be installed separately?
Thanks
George

No, don't try to remove iWork first, you may run into all kinds of trouble. I'm not even sure if running the installer again will work. Many users have had problems trying with the trial installed & the purchased iWork installer will say there is nothing to install.
You might find it easier to use the free TinkerTool to show all invisible files & find the iWork Fonts.pkg on the iWork '05 install DVD.
Peggy

Similar Messages

Missing system font for template

I was trying to load a template (Info, Checkbox), but am getting the error message that this project uses a missing system font: applemyungjo regular. Anyone know where I can get this font?

I'm not sure why LT thinks it needs this Korean font, but it now has what it wants. When I did my erase and install of Leopard, I did not include the optional foreign fonts. I reinstalled the fonts from the install disk for the computer (without having to touch Leopard installation) and it works now.

My Font Book is missing some fonts??

Hi,
I've upgraded from Tiger to Leopard. Tiger is backed up on a portable drive that is currently plugged into a USB port on my Mac.
The following has happened three.
I just opened a website and a window opeds (on the Mac not the website) telling me that Safari wants to use a certain font (in this case Garamond) that is on the Tiger Back up drive. I don't recall the name of the other two fonts.
Is there any particular reason why the Font Book on Leopard does not have these fonts?
Is there any reason why I shouldn't add them?
How do I do add them? Is it just cut and paste (I don't want to mess anything up)?
Thank you.

Just copy and paste to add.
Depends on how you upgraded as to what would have been copied where, and may explain why fonts are now missing.
Font book by default only installs fonts for you, but you may have changed it to install for all users, in which case it would copy to your main system folder and would explain why they are missing as you now have a new system folder. Nothing is carried over from old to new system folder when upgrading.
Just copy the missing fonts from the drive to your machine. Should just be a double click to install.

Flash CS5 IDE on OS X missing several font families from property inspector

I'm missing several font families from the properties character font family inspector in my Flash CS5 ide on os x. These fonts are present in my font dir and are available in all my other CS5 suite applications (Photoshop, Dreamweaver, AfterEffects, etc).
Anyone experience this?

This forum is for Flash Media Server Developers so most likely you migth get much traction here. I would recommend you to post your query on Flash Builder forum: http://forums.adobe.com/community/flash_builder/using_flash_builder
Also you can try posting here:
Flash Platform Services For Promotion - http://forums.adobe.com/community/promotion
Flash : http://forums.adobe.com/community/flash/flash_general

Missing Template Handler is missing in action.

After a bit of struggle I found out how to input a missing
template
handler into our aged 4.5 Unix ColdFusion server. I was able
to have it
server up the custom 404error.htm file developed by our web
department.
And this worked, sort of.
The problem was that this HTML file makes use of Apache
 directives which, of course, ColdFusion does
not understand.
So, I say no problem, I've dealt with this already before and
expanded
on some existing code that reads the html file and replaces
all these
virtual includes with the contents of the included file using
<cfile...>
tags and reFind() functions. This version even uses a Custom
Tag and
recursion to handle virtual includes inside of virtually
included files.
And this works great!
http://www.cdpr.ca.gov/errors/404error.cfm.
But when I then went into the ColdFusion administrator and
replaced the
HTML file path
'/rootDir/subDir/subDir/htdocs/errors/404error.htm'
with the corresponding CFML path
'/rootDir/subDir/subDir/htdocs/errors/404error.cfm' it stops
working.
ColdFusion starts to display the default ColdFusion 404 not
found error
rather then my specified Missing Template Handler.
What's wrong here? Why can't I server up a CFM file from the
exact same
place I can serve up an, albeit incomplete, HTML file?

User Since V1.5 wrote:
>
> I will be very happy if someone points out what I'm
missing.
>
Everything you have describe is true. The main point is that
sometimes
people do not want to and that there are reasons not to let
IIS handle
ColdFusion missing templates.
To be as clear as possible, if you have set IIS to check for
the
existence of a cfm file and then throw either a default or
custom HTTP
404 error page this will overwrite anything that could of or
would of
been done with a ColdFusion missing template page.
Sometimes this is a bad thing. For one example, there are
techniques
and development methodologies that build a 'template' or
'response'
completely in memory and a cfm file does not actually exist
in this
case. This is more advanced then many people work with but it
is
possible. In this case your having IIS check for the
existence of a
template would defeat the purpose. Another example is that a
server
wide missing template handler used by the ColdFusion server
can be
passed simple information about the error from ColdFusion,
this does not
happen with the IIS methodology.
So the missing template handler exists for cases where for
one reason or
another somebody does not want to have IIS checking for the
existence of
a cfm template before handing off the request to the
ColdFusion server.
As with many things in life, it is all about choices and what
works for
one person may not work for another.
A common difficulty with the missing template handler is that
it does
not necessarily live in the web server root. It has to live
in the Jrun
(aka Java) server web root which often is different then the
web server
root.
I.E. A common configuration may be this.
c:/inetpub/wwwroot 
c:/jrun/servers/cfusion/cfusion-ear/cfusion-war 
The latter is where the ColdFusion server wide missing
template hander
template file would have to live in this example
configuration.

Problems with missing template handler

Hello,
We have put the name testmiss.cfm in the missing template
handler in the administrator. Still, the default ColdFusion error
message shows when a cfinclude has template=a nonexisting file and
when in an html form,
action=a nonexisting cfm file. I have testmiss.cfm in both
the root with Application.cfm and the directory with all the other
cfms but still no luck.
Any idea what we are doing wrong?
Thank you very much.

bill0 wrote:
> Thanks for all the help but still no luck.
>
> The directory is d:\wSites\GBMain\html\CFMS> and I am
mapped to it as x:\CFMS.
> Most of the cfm files are in CFMS but Application.cfm is
1 directory up in
> html. I have tried misscfm.cfm in both html and CFMS but
had no luck having it
> find a non existant template referred to in a cfinclude
or a form's action
> attribute. The default ColdFusion error handler is what
shows. The missing
> template handler box says /misscfm.cfm. Misscfm.cfm is
text followed by a
> <cfabort>. We use ColdFusion MX6.1
>
> I hope that is enough information to figure what am I
missing and/or doing
> wrong.
>
>
Is the 'misscfm.cfm' file somewhere in the
'd:\wSites\GBMain\html\CFMS\'
directory. I will presume this is the 'web root' as defined
in your web
server (IIS or Apache or built-in or ???). The missing
template handler
file needs to be in the ColdFusion root. This is going to be
a
directory such as
'{drive}:\JRun4\servers\{server}\cfusion-ear\cfusion-war\misscfm.cfm'
for J2EE flavors OR '{drive}:\CFusionMX\wwwroot' for Standard
I think.
It has been a very long time since I have dealt with
Standard.
This is probably completely different from the above web
root. That is
the point I am trying to get across. ColdFusion has TWO roots
where it
will look for a CFML file. But the Missing and Sitewide
templates can
only be in the ColdFusion root listed above, they will not
work in the
web root.
HTH
Ian

[Perm] InDesign missing necessary fonts or CMAP files.

Hi there...
I searched and found a thread on this before but I still haven't been able to solve my problem.
I performed a clean install of Jagaur on my system. G3 iMac DV SE 500 Mhz (Snow) and it has 768 MB RAM.
I then installed InDesign 2.0 from the CD and it installs fine. When I launch InDesign I get the error that "Missing Required Fonts or CMAP file. Please reinstall InDesign" -- I've reinstalled about 50 times with the same result.
I've tried the following:
- Deleting all instances of Adobefnt.lst
- Deleting all InDesign support files from the root>library>application support>adobe folder and the user>username>library>preferences folder.
I'm at my wits end. InDesign performs flawlessly on my Titanium Powerbook G4, also running Jaguar.
Does anyone else have any other suggestions?
:) Mordy

I FOUND IT!!!
For some odd reason, the Application Support in my user>username directory was locked and owned by the system -- therefore, the ID installer couldn't put the files there (the files WERE in the root>library>application support folder but I guess that wasn't good enough. Anyway, I reset the owner of the folder to myself (admin) and then manually copied the fonts and cmap files there and it launched!!!
YAY!!!!!
Thanks to everyone who helped both physically and mentally...
:) Mordy

Missing PostScript fonts in InDesign CC

I dont’ think this is a new discussion but I haven’t seen the answer yet. The question is: how can I see my Postscript fonts in InDesign CC?

Yeah!
Op 4 dec. 2013, om 14:36 heeft Peter Spier <[email protected]> het volgende geschreven:
Re: Missing PostScript fonts in InDesign CC
created by Peter Spier in InDesign - View the full discussion
Are they installed on your system?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5899265#5899265
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5899265#5899265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5899265#5899265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Missing chinese font in Android 4.4

ENV:
Android 4.4
NEXUS 4
air 3.8 | air 4.0
Textfield (none font setup )
like " "
missing Chinese font,but English and number have no problem.
StageText
like "当前设备包含字体:Android Emoji...."
works fine
device enumerateFonts
[font.fontName,font.fontStyle,font.fontType].join(',')
Android Emoji,regular,device
AndroidClock?,regular,device
AndroidClock?-Large,regular,device
Clockopia,regular,device
Droid Arabic Naskh,regular,device
Droid Naskh Shift Alt,regular,device
Droid Sans Armenian,regular,device
Droid Sans Devanagari,regular,device
Droid Sans Ethiopic,regular,device
Droid Sans Fallback,regular,device
Droid Sans Georgian,regular,device
Droid Sans Hebrew,regular,device
Droid Sans Mono,regular,device
Droid Sans Tamil,regular,device
Droid Sans Thai,regular,device
Droid Serif,regular,device
MotoyaLMaru,regular,device
NanumGothic?,regular,device
Noto Sans Bengali,regular,device
Noto Sans Bengali UI,regular,device
Noto Sans Kannada,regular,device
Noto Sans Kannada UI,regular,device
Noto Sans Malayalam,regular,device
Noto Sans Malayalam UI,regular,device
Noto Sans Telugu,regular,device
Noto Sans Telugu UI,regular,device
Roboto,regular,device
Roboto Condensed,regular,device

Android 4.4.2
Nexus 5
Nexus 7
the same problem

Missing Template Handler Issues

Hi there, we're having some problems setting this up. We get
the custom page we've created but still see the default coldfusion
information..... Here's what we've done..
(1) Set the path correctly in the Coldfusion Admin >
Settings. 'Missing Template Handler'.
(2) Made the changes in IIS as described here...
http://kb.adobe.com/selfservice/viewContent.do?externalId=95ee04fb&sliceId=1

You are using CF8 right? Because it works just fine for me.
Here is what I did to test.
1) created a simple cfm template with nothing more than
<cfoutput>helloworld</cfoutput> and
saved it as missing.cfm in my webroot (
http://localhost/missing.cfm
2) logged into the coldfusion administrator and added
/missing.cfm into the box where it asks for the missing template
relative path.
3) hit submit changes.
then browsed out to
http://localhost/SomeStrangePageThatDoesntExist.cfm
and as expected saw only "missing"
The only thing I can think of is that you have in your
missing template page another cfinclude that is failing.
Try the above approach and see if you continue to get the
error.

After Effects CS6 Missing 'Template Projects'

Hello,
The following support page identifies the problem...
Library, title templates, template projects missing: Premiere Pro, After Effects, Encore
• When you access the template projects in After Effects CS6 or CC, the template projects are missing.
After Effects Solution: Download and install content from the Adobe After Effects Exchange
Here is the link provided by above solution....
https://creative.adobe.com/addons
However, there does not appear to be any After Effects 'Template Projects' posted at the Add-ons site.
This help page provides a description of the missing content...
After Effects Help | Projects
Could someone please identify where I can download these files from.
Thanx.../John

Hi Todd,
There is still no solution to the After Effects CS6 Missing 'Template Projects'.
Could you please post this requested content and provide a link.
.../John

Missing one Font "Showcard Gothic"!

I have a new PC, old was Win 7 new is Win 8. I'm missing one font "Showcard Gothic", where I can downloaded from? I also saw from FAQ: Fonts changed when changing OS! Is that true?
I contacted Tech support in Microsoft to see the availability of the font, and I have been told that Photoshop use their own fonts!! Please help. Thanks.
OK, I contacted Adobe Photoshop Tech support, and the response was: The font you are referring to, don't come with the operating system or in Photoshop CS6. Photoshop utilize any available fonts from any other software installed on the same PC. In my case the font "Showcard Gothic" was available in my old PC from Microsoft Office 2010. Currently, in my new PC I purchased Office 2013, which it don't have that font.
The solution: deactivate MS Office 2010 from old PC, and install it in new PC. You don't have to use MS Office 2010 in the new PC, but the fonts that comes with it will be available to Adobe Photoshop CS6.
Gee, I thought if I upgraded everything to the latest and the greatest, everything will be wonderful...wrong.
I hope my experience with this matter will help someone reading this post, and saving them time searching for a solution. My wife always tells me, when I upgrade anything "No, I don't want it. I want only ON and OFF". :>

There are many fonts that come with your OS (Windows 7 or 8). Other applications will install extra fonts when you install them.
In your case, Showcard Gothic does not come with your OS. Nor does it come with Adobe products. Instead it comes from Microsoft Office products.
When you started working on the new computer, it did not have all of the same applications installed, including the fact that is was missing any applications that would install Showcard Gothic. You need to install an application on your new computer that includes Showcard Gothic. Here is a list provided by Microsoft: http://www.microsoft.com/typography/fonts/font.aspx?FMID=599
Photoshop and other Adobe products will allow you to use the fonts that are installed on your system. If the font is not installed on your system, you will not be able to use it in Photoshop.
The information you were given previously is correct and that fact that you do not have Showcar Gothic installed on your new computer has nothing to do with Photoshop or Adobe.

Can you specify a missing template handler that lives under another site?

I have configured a dedicated site, separate from my website, for my ColdFusion administrator (CFIDE). So I have my website here: http://www.public-site.com/ and my ColdFusion admin here: http://www.cfadmin-site.com/ . They both live on the same server but under different directories. So now I am configuring my ColdFusion settings and wondering if there is some way to configure the missing template handler and site-wide error handler to use files that live under the public site directory so that I can give my users a consistent look?
I am guessing that this is not possible but thought I would ask. I may be left with creating the modules under my ColdFusion admin directory and then using <cflocation> to redirect the user back to the public website environment. Or embedding some javascript to redirect them. Any other thoughts?

OK, now I think I see where you are coming from about not needing to redirect *lightbulb* and perhaps I can explain to you what I am seeing. Again, here is my setup:
web root: D:\wwwroot\public-site\
cf web root: D:\wwwroot\cfadmin-site\
Now let's say I have a file in the web root like this: D:\wwwroot\public-site\error.cfm If I try to enter that in my site-wide error handler in ColdFusion it tells me that the file does not exist. Makes sense.
So I moved my file to the cf web root like this: D:\wwwroot\cfadmin-site\error.cfm and set my site-wide error handler accordingly. Now when I force an exception I get an error that my site-wide error handler failed. In the logs I see this error:
"Error","jrpp-26","11/08/10","14:02:30",,"'' The specific sequence of files included or processed is: D:\wwwroot\public-site\error.cfm'' "
java.security.PrivilegedActionException: coldfusion.runtime.TemplateNotFoundException: File not found: D:\wwwroot\public-site\error.cfm
So now that a template is executing ColdFusion is looking for the site-wide error handler in the web root of the public site. But the ColdFusion administrator will not let me enter that path in the site-wide error handler setting of the administrator page.
Did you run across this too? Surely we don't need to have the file in both locations.

Missing templates, apple, etc in palette

I wonder how it happened....missing templates, apple, shapes, buttons, etc in palette. Why are those missing? Do I have to reinstall DVD SP?

during installation one can elect to install or not install templates. (I choose not to install the PAL templates, for example) And if they're moved, say to a different drive, they can get lost. Reinstallation is not a big deal at all. And you may be able to install just the templates. I haven't done that in a while.

PRE 7 missing templates

I have seen that others have had similar problems with missing templates (menus etc), but in my case it was from a downloaded version, not from a disc.
I downloaded an upgrade version of PE 7. When I first opened the program I got a message saying something along the lines of the fact that there were missing templates and it gave a link to fix the problem. The link simply took me to the original download page for the full software package. I had expected that it would be a link to the templates themselves. How do I go about downloading the templates...or do I have to download the entire software again?? (Is this possible, or having paid my money will it only allow me to download once?)
In the meantime is it possible to use the templates from my earlier version (PE 3). If I copy them across to the appropriate folder in PE 7 will they work okay?
Thanks

The FAQs to the right of this forum offer this solution.
http://forums.adobe.com/thread/390607?tstart=0

Missing template fonts

Similar Messages

Maybe you are looking for