Missing Template Handler Issues

Hi there, we're having some problems setting this up. We get
the custom page we've created but still see the default coldfusion
information..... Here's what we've done..
(1) Set the path correctly in the Coldfusion Admin >
Settings. 'Missing Template Handler'.
(2) Made the changes in IIS as described here...
http://kb.adobe.com/selfservice/viewContent.do?externalId=95ee04fb&sliceId=1

You are using CF8 right? Because it works just fine for me.
Here is what I did to test.
1) created a simple cfm template with nothing more than
<cfoutput>helloworld</cfoutput> and
saved it as missing.cfm in my webroot (
http://localhost/missing.cfm
2) logged into the coldfusion administrator and added
/missing.cfm into the box where it asks for the missing template
relative path.
3) hit submit changes.
then browsed out to
http://localhost/SomeStrangePageThatDoesntExist.cfm
and as expected saw only "missing"
The only thing I can think of is that you have in your
missing template page another cfinclude that is failing.
Try the above approach and see if you continue to get the
error.

Similar Messages

Missing Template Handler is missing in action.

After a bit of struggle I found out how to input a missing
template
handler into our aged 4.5 Unix ColdFusion server. I was able
to have it
server up the custom 404error.htm file developed by our web
department.
And this worked, sort of.
The problem was that this HTML file makes use of Apache
 directives which, of course, ColdFusion does
not understand.
So, I say no problem, I've dealt with this already before and
expanded
on some existing code that reads the html file and replaces
all these
virtual includes with the contents of the included file using
<cfile...>
tags and reFind() functions. This version even uses a Custom
Tag and
recursion to handle virtual includes inside of virtually
included files.
And this works great!
http://www.cdpr.ca.gov/errors/404error.cfm.
But when I then went into the ColdFusion administrator and
replaced the
HTML file path
'/rootDir/subDir/subDir/htdocs/errors/404error.htm'
with the corresponding CFML path
'/rootDir/subDir/subDir/htdocs/errors/404error.cfm' it stops
working.
ColdFusion starts to display the default ColdFusion 404 not
found error
rather then my specified Missing Template Handler.
What's wrong here? Why can't I server up a CFM file from the
exact same
place I can serve up an, albeit incomplete, HTML file?

User Since V1.5 wrote:
>
> I will be very happy if someone points out what I'm
missing.
>
Everything you have describe is true. The main point is that
sometimes
people do not want to and that there are reasons not to let
IIS handle
ColdFusion missing templates.
To be as clear as possible, if you have set IIS to check for
the
existence of a cfm file and then throw either a default or
custom HTTP
404 error page this will overwrite anything that could of or
would of
been done with a ColdFusion missing template page.
Sometimes this is a bad thing. For one example, there are
techniques
and development methodologies that build a 'template' or
'response'
completely in memory and a cfm file does not actually exist
in this
case. This is more advanced then many people work with but it
is
possible. In this case your having IIS check for the
existence of a
template would defeat the purpose. Another example is that a
server
wide missing template handler used by the ColdFusion server
can be
passed simple information about the error from ColdFusion,
this does not
happen with the IIS methodology.
So the missing template handler exists for cases where for
one reason or
another somebody does not want to have IIS checking for the
existence of
a cfm template before handing off the request to the
ColdFusion server.
As with many things in life, it is all about choices and what
works for
one person may not work for another.
A common difficulty with the missing template handler is that
it does
not necessarily live in the web server root. It has to live
in the Jrun
(aka Java) server web root which often is different then the
web server
root.
I.E. A common configuration may be this.
c:/inetpub/wwwroot 
c:/jrun/servers/cfusion/cfusion-ear/cfusion-war 
The latter is where the ColdFusion server wide missing
template hander
template file would have to live in this example
configuration.

Problems with missing template handler

Hello,
We have put the name testmiss.cfm in the missing template
handler in the administrator. Still, the default ColdFusion error
message shows when a cfinclude has template=a nonexisting file and
when in an html form,
action=a nonexisting cfm file. I have testmiss.cfm in both
the root with Application.cfm and the directory with all the other
cfms but still no luck.
Any idea what we are doing wrong?
Thank you very much.

bill0 wrote:
> Thanks for all the help but still no luck.
>
> The directory is d:\wSites\GBMain\html\CFMS> and I am
mapped to it as x:\CFMS.
> Most of the cfm files are in CFMS but Application.cfm is
1 directory up in
> html. I have tried misscfm.cfm in both html and CFMS but
had no luck having it
> find a non existant template referred to in a cfinclude
or a form's action
> attribute. The default ColdFusion error handler is what
shows. The missing
> template handler box says /misscfm.cfm. Misscfm.cfm is
text followed by a
> <cfabort>. We use ColdFusion MX6.1
>
> I hope that is enough information to figure what am I
missing and/or doing
> wrong.
>
>
Is the 'misscfm.cfm' file somewhere in the
'd:\wSites\GBMain\html\CFMS\'
directory. I will presume this is the 'web root' as defined
in your web
server (IIS or Apache or built-in or ???). The missing
template handler
file needs to be in the ColdFusion root. This is going to be
a
directory such as
'{drive}:\JRun4\servers\{server}\cfusion-ear\cfusion-war\misscfm.cfm'
for J2EE flavors OR '{drive}:\CFusionMX\wwwroot' for Standard
I think.
It has been a very long time since I have dealt with
Standard.
This is probably completely different from the above web
root. That is
the point I am trying to get across. ColdFusion has TWO roots
where it
will look for a CFML file. But the Missing and Sitewide
templates can
only be in the ColdFusion root listed above, they will not
work in the
web root.
HTH
Ian

Can you specify a missing template handler that lives under another site?

I have configured a dedicated site, separate from my website, for my ColdFusion administrator (CFIDE). So I have my website here: http://www.public-site.com/ and my ColdFusion admin here: http://www.cfadmin-site.com/ . They both live on the same server but under different directories. So now I am configuring my ColdFusion settings and wondering if there is some way to configure the missing template handler and site-wide error handler to use files that live under the public site directory so that I can give my users a consistent look?
I am guessing that this is not possible but thought I would ask. I may be left with creating the modules under my ColdFusion admin directory and then using <cflocation> to redirect the user back to the public website environment. Or embedding some javascript to redirect them. Any other thoughts?

OK, now I think I see where you are coming from about not needing to redirect *lightbulb* and perhaps I can explain to you what I am seeing. Again, here is my setup:
web root: D:\wwwroot\public-site\
cf web root: D:\wwwroot\cfadmin-site\
Now let's say I have a file in the web root like this: D:\wwwroot\public-site\error.cfm If I try to enter that in my site-wide error handler in ColdFusion it tells me that the file does not exist. Makes sense.
So I moved my file to the cf web root like this: D:\wwwroot\cfadmin-site\error.cfm and set my site-wide error handler accordingly. Now when I force an exception I get an error that my site-wide error handler failed. In the logs I see this error:
"Error","jrpp-26","11/08/10","14:02:30",,"'' The specific sequence of files included or processed is: D:\wwwroot\public-site\error.cfm'' "
java.security.PrivilegedActionException: coldfusion.runtime.TemplateNotFoundException: File not found: D:\wwwroot\public-site\error.cfm
So now that a template is executing ColdFusion is looking for the site-wide error handler in the web root of the public site. But the ColdFusion administrator will not let me enter that path in the site-wide error handler setting of the administrator page.
Did you run across this too? Surely we don't need to have the file in both locations.

Missing template/layout issues post-content migration

We are attempting a migration of data and content from 6.3 to 6.2 (for SAP EL integration) and we are seeing two issues. About 1/3 of the meetings display a node with the message: "The template you are looking at is the one we use if the default template feature is not working", another 1/3 show a blank meeting board and have no available layouts, and the remaining 1/3 work fine.
We are still trying to determine if this might be a versioning issue by examining creation/mod dates of the meetings and underlying templates but have yet to find a discernable pattern. Note, all meetings function without issue in the 6.3 system.
My next stop is hunting for DB discrepencies...
Any help appreciated,
Lee

Does anyone know where/how the file system path to content is configured? I have looked through the DB and App file dir with no luck. The (target) lab system I am using was installed with a non-default path (D:/AdobeConnect/breeze...) and the (source) migrated content came from a system with a default path (D:/breeze...). When attempting to access the content library, the object display window just times out. I have verified the content does exist in file system and is uncorrupted.
Any help appreciated,
Lee

Missing template handler

hi, i have a 404.cfm file putting in the wwwroot folder and
checking for each folder's website if the certain page not exists,
it should display error.
it works as the code i am using is this:
<cfset path = Replace(CGI.script_name, "/",
"")><style type="text/css"></style><cfoutput><body topmargin="0"
leftmargin="0" rightmargin="0" bottommargin="0"> <table
width="100%" height="100%" border="0" cellpadding="1"
cellspacing="2" class="border"> <tr> <td
height="93"><div align="center" class="asd">The page
<strong>#path#</strong> is not
available.</div></td> </tr> <tr>
<td><h1 align="center" class="total">Make sure that you
entered the page correctly.</h1> <p align="center">
<meta http-equiv="refresh"
content="7;URL=http://#CGI.HTTP_HOST#" /> <span
class="asd">Going Back </span></p></td>
</tr> </table> </body></cfoutput>
this takes back to the
http://127.0.0.1:8500/ folder
where all my folders are residing
i want like if i am using like
http://127.0.0.1:8500/crafting/abc.cfm
abc.cfm does not exists, it should go back to
http://127.0.0.1:8500/crafting
home page and it should work for each folder differently
i am trying but do look at my code if i am missing
something..

nightwolf666 wrote:
> any help in thsis instance plz anybody
1) install a proper web server like Apache which supports
multiple
websites/webroots.
2) if each folder in your webroot contains separate website:
for each of
your website define #application.siteroot# (which in your
example's case
will be set to
http://127.0.0.1:8500/crafting)
and metarefresh to that
instead of to #cgi.http_host#
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

"Current assignment" field missing in Handling Unit status tab

Our scenario is as below:
1. STO created and outbound deliveries generated
2. Deliveries are assigned to shipment
3. Packing is done using RF transaction
In the normal scenario, the HU status tab would show the outbound delivery number in the current assignment tab. But for some Handling Units, the current assignment field shows blank. Also, the contents tab shows only the delivery line item number and not the delivery number. We have also noticed that the problem delivery line items have been packed in 2 different Handling Units, each containing the full delivery line item quantity. (not sure how this is possible). One of the HU is displayed correctly but the other one has the missing delivery number issue.
Has anyone encountered such a scenario? How is the system allowing to pack the same delivery item quantity in 2 different Handling Units? Any suggestions in this regard would be very helpful.

Hi,
Thank you very much...
i have another doubt.....
i am unable to understand determination of packing instructions.
where it is linking i am confused.
we are assigning the determination procedure in the T.code
OVHU2.(Maintain Packing Transaction Profile in IMG).
my doubt is where we are assigning this Transaction Profile in Handling Units.
Please help me....
with regards

How to setup a template to issue SHA1 certs if I have a SHA256 chain

Hi All
Can any one tell me how to setup a template to issue SHA1 certs if I have a SHA256 chain. I looked at the templates and I didn’t see where it is specified?
Puneet Singh

Certificate signature algorithm is CA-wide settings and independent from certificate templates. You have to configure your CA to use SHA1 signature:
certutil -setreg ca\csp\cnghashalgorithm sha1
net stop certsvc && net start certsvc
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

Possibility to register Pre-/Post-Procedures for an SQL Template Handler

I would appreciate to see the possibility to register pre-/post-procedures for an SQL template handler in ORDS 3.0.
Why:
We use Oracle VPD/Row-Level-Security to secure data access. Hence a trigger sets a couple of attributes in the database session context at login time which are then used in static RLS predicates to limit which records the user can see/modify.
With ORDS 3.0 all sessions are opened under the same technical user (e.g. APEX_REST_PUBLIC_USER), hence all users have the same/no attributes in the session context and could see/modify all data.
To avoid this situation, I need to set the attributes (e.g. the authenticated user) in the database session context before the actual query/plsql handler is executed.
Also, resetting the session context after the handler is executed would be good.
This scenario is in line with scenarios 'One Big Application User' and 'Web-based applications' in http://docs.oracle.com/cd/B28359_01/network.111/b28531/vpd.htm#DBSEG98291.
Different solution approach:
Kris suggested to write a PL/SQL handler where the pre-procedure is called before the business logic procedure/query. This is ok for me as long as I modify data and only need to return no or little data.
As soon as I need to return a lot of data (e.g. select c1, c19, c30 from t1), this approach will force me to write a lot of code in the PL/SQL handler in order to marshal the c1, c19 and c30 to JSON and put it in the HTTP response.
But this is the beauty of ORDS - I can simply define a template, write a GET SQL Handler 'select c1, c19, c30 from t1' and have the data available as REST service, without writing any code to write JSON marshaled data in the HTTP response.

I tried to log the request at Oracle REST Data Services (ORDS) but I could only start a new discussion: Possibility to register Pre-/Post-Procedures for an SQL Template Handler
As I mentioned there, the PL/SQL handler approach works for me as long as I have no or only little data to send back to the client (e.g. put/post/delete succeeded or an error message why the call failed).
If I need to return a lot of data from the PL/SQL handler I would need to, as far as I understand, to marshal the data to JSON and write it to the response body in the PL/SQL handler.
I don't want to do the marshaling, because ORDS does it better.
However, this works for me:
I write a pipelined stored procedure that takes as input the attributes I need to set in the session context. I then can reference it in the SQL handler:
select * from table(my_pipelined_function(:USER, ....)
Now the JSON/HTTP response is created by ORDS again.
I still needed to code a couple of lines, but it is way better than duplicating the functionality already existing in ORDS.
With the hooks it would be perfect because I would not have to write any code (apart from the procedure to set the session context attributes), just configure the REST services in ORDS.

After Effects CS6 Missing 'Template Projects'

Hello,
The following support page identifies the problem...
Library, title templates, template projects missing: Premiere Pro, After Effects, Encore
• When you access the template projects in After Effects CS6 or CC, the template projects are missing.
After Effects Solution: Download and install content from the Adobe After Effects Exchange
Here is the link provided by above solution....
https://creative.adobe.com/addons
However, there does not appear to be any After Effects 'Template Projects' posted at the Add-ons site.
This help page provides a description of the missing content...
After Effects Help | Projects
Could someone please identify where I can download these files from.
Thanx.../John

Hi Todd,
There is still no solution to the After Effects CS6 Missing 'Template Projects'.
Could you please post this requested content and provide a link.
.../John

ERROR: Execution failed due to binary missing or permission issues

I have a little problem with OEM. I've setup the LDAP authentication on my Linux RAC nodes and when I run a OS command without sudo, the date command works. I've setup my sudoers so my regular LDAP account can execute any command as oracle, but when I run the same OS command with sudo to oracle, the job comes back with:
Error Log
ERROR: Execution failed due to binary missing or permission issues
Has anyone else seen this problem?
Thanks,
Arwin

Looks like someone had some fat fingers when typing in the emcli commands to tell OEM where the sudo binary lives. I which the errors that OEM spit out are more meaningful, such as if it is going to tell me that a binary or permission is not there or set, what was it looking at?

Missing templates, apple, etc in palette

I wonder how it happened....missing templates, apple, shapes, buttons, etc in palette. Why are those missing? Do I have to reinstall DVD SP?

during installation one can elect to install or not install templates. (I choose not to install the PAL templates, for example) And if they're moved, say to a different drive, they can get lost. Reinstallation is not a big deal at all. And you may be able to install just the templates. I haven't done that in a while.

PRE 7 missing templates

I have seen that others have had similar problems with missing templates (menus etc), but in my case it was from a downloaded version, not from a disc.
I downloaded an upgrade version of PE 7. When I first opened the program I got a message saying something along the lines of the fact that there were missing templates and it gave a link to fix the problem. The link simply took me to the original download page for the full software package. I had expected that it would be a link to the templates themselves. How do I go about downloading the templates...or do I have to download the entire software again?? (Is this possible, or having paid my money will it only allow me to download once?)
In the meantime is it possible to use the templates from my earlier version (PE 3). If I copy them across to the appropriate folder in PE 7 will they work okay?
Thanks

The FAQs to the right of this forum offer this solution.
http://forums.adobe.com/thread/390607?tstart=0

Section/Template Handles for Sakai Integration

Hello,
I am working with Shepherd University's Learning Management System, the open-source Sakai, and trying to integrate it with our iTunesU account. There is already a tool (albeit a bit older and possibly out of date, I'm not sure) for Sakai that is to integrate with iTunesU, but there are a couple credentials and variables I don't have off-hand. I know, from our account information, the shared secret, the different credentials for Administrator, etc. But, my problem comes in needing a section handle for the location to have the sites inserted, and a template handle for the system to follow in creating new pages on iTunesU. Though we have an iTunesU account, it is rather new and we haven't used it much, so we are not very familiar with the system.
I've seen that I could get the handles for the sections and pages using a ShowTree command, but the process to get to that is rather long for one single inquiry, and thus far I'm having much trouble in getting that to work. Also, I'm not sure if this will get me the handles for any templates I have set-up. Is there any easier or better way just to get this basic information? Thus far I do not even know the handle, offhand, for the top-level of our account's site, much less any of the sections or tracks underneath it. Any help would be much appreciated!
Regards,
Adin J. Ray

please check:
SAP Note Number: 923359
Terminology has been changed as of SAP NetWeaver 7.0 (2004s) Support Package Stack 6:
The configuration wizard was called "Template Installer" and is sometimes refered to as "Central Technical Configuration" or "CTC".
The configuration tasks, which are selected and started from a list in the configuration wizard, were formerly called "templates".

Missing Template Error Handler

I need to know the shortest, simplest way to handle missing
CF template errors on my website. This cannot be set in the
Administrator, as my hosting company has told me: "...we cannot do
so as all of our customers sites that are accessed wrongly, will
result in your custom error." They are using ColdFusion 7.
I have a simple site. I do not have any login/logout
applications or any other kinds of CF applications. You can see
this is the case by visiting www.GwenHarrison.com. I do not need a
long, complicated application.cfc file. I just need the bare bones
method for handling missing CF templates without being able to set
this in the Administrator.
I have posted this message previously, but all responders
have assumed that I have a large, complicated website with a big CF
application. This is not the case. Their suggestions have included
far more code than I need to handle, plus disparaging comments
about my CF skills. Sorry, but not everyone comes out of the womb
with 10 years of CF experience. I am hoping someone with some
compassion will have a little pity on a CF noob and help me figure
this out.
Thanks,
Gwen H

As far as I am aware, the only way you can handle missing CF
templates is by defining a standard page within the CFIDE.
That is what I use for all of our CF sites but we set up
seperate instances of CF for each site.
Ray Camden posted a good guide on his blog which can be found
here
http://www.coldfusionjedi.com/index.cfm/2007/12/5/The-Complete-Guide-to-Adding-Error-Handl ing-to-Your-ColdFusion-Application
Hope this helps :)

Missing Template Handler Issues

Similar Messages

Maybe you are looking for