Missing templates after installing 10.1.3 - no diagrams

Hi,
Ive happily used 10.1.2 for UML Class diagrams etc recently, have downloaded the full install for 10.1.3 (as very interested to try out the Sequence diagrams).
After installing 10.1.3 I notice there are very few Application templates available (only "No template" and "Java App") - so there is no Diagram option under the General category when creating New.
What setup do I have to perform to activate the Diagramming options ?
Is this covered in the installation Readme anywhere ?
Thanks. Darren.

Darren,
Glad that helped, if you have any comments or suggestions about the Sequence Diagrammer, please post any feedback you have and I will pass it on to the Developer.
Regards,
Lisa Sherriff
JDev QA

Similar Messages

Missing folder after installing myapplication with AppBuilder 8.5

In the project property for the installer, I created a data-folder for my application. This folder is for later use with the myapp. So during installation its empty.
After installation on the target PC, I miss the folder. Only the folder with the myapp has been created.
My system: LV8.5 full, AppBuilder on winXP SP2
Any idea?
Andreas

The installer builder does not support creating an empty folder. It's a feature that's been requested for a while, and we'd like to add it, but it has not been a high priority feature. The workaround is to install a dummy file (0 bytes) to the folder. Or you could configure the installer to run a batch file that creates an empty folder. The downside to using the batch file, however, is that the uninstaller won't know to remove the folder.

SharePoint 2013 Configuration Wizard Missing Components after Install ServicePack 1

Hello,
today we have installed SharePoint Service Pack 1 for SharePoint Server 2013 inclusive Service Pack 1 for all language packs (we used the new released Service Packs).
Our SharePoint Environment has only one SharePoint Server.
Many
language packs
are
installed
on
this
server.
If we try to run the configuration wizard through the GUI, then we get the following error:
If we try to run "psconfig -cmd upgrade -inplace b2b -wait" then we get also an error:
SharePoint Products Configuration Wizard version 15.0.4569.1503. Copyright (C) Microsoft Corporation 2012. All rights reserved.
The upgrade command is invalid or a failure has been encountered.
The server farm will not work with missing installs. Add "-cmd installcheck -noinstallcheck" to the command-line to ignore this warning.
The following is missing on :
Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
We checked the Installation in "Programm and Features", result see below:
Next step we run the PowerShell command: Get-SPProduct -local, result see below:
ProductName
Required Missing   Servers
Language Pack for SharePoint 2013 - Bulgarian/български                              True
{ServerName, }
Language Pack for SharePoint 2013 - Croatian/Hrvatski                                True
{ServerName, }
Language Pack for SharePoint 2013 - Romanian/Română
True               {ServerName, }
Language Pack for SharePoint 2013 - Thai/ไทย
         True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Chinese (PRC)/中文(简体)    True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Chinese (Taiwan)/中文 (繁體)   True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Czech/čeština                 True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Danish/dansk                  True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Dutch/Nederlands              True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Finnish/suomi                 True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - French/Français               True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - German/Deutsch                True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Greek/Ελληνικά                True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Hebrew עברית                  True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Hungarian/magyar              True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Italian/Italiano              True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Japanese/日本語      True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Korean/한국어                    True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Norwegian/norsk               True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Polish/Polski                 True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Portuguese/Português          True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Portuguese/Português (Brasil) True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Russian/русский               True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Slovak/Slovenčina             True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Spanish/Español               True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Swedish/svenska               True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Turkish/Türkçe                True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Ukrainian/Українська          True               {ServerName, }
Microsoft SharePoint Server 2013
True               {ServerName, }
What's the mistake?
Why we can't run the configuration wizard?
Has anyone answers?
Thanks a lot.
Regards Mario

try to run the below command on all server in the farm and then run the config wizard
Get-SPProduct -Local
Above command basically update the product information into the configuration database. Read this blog from the Trevor.
http://thesharepointfarm.com/2013/12/the-magic-of-get-spproduct-local/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Missing fonts after installing Illustrator CC

Illustrator CS5 and CS6 (and previous versions) came with a set of core fonts, e.g. Myriad Pro, included upon install.
I uninstalled Illustrator CS6 (and all other CS6 products) before installing Illustrator CC, but none of the fonts were included, so in Illustrator I have no MyriadPro (the font appears in the font list, but has an asterisk next to it to indicate a subsitution is being made). Are these fonts no longer included?
Okay - fixed. A restart later and the fonts are there. They must be registered with Windows on restart, which is an odd way of doing it as there's no requirement that the computer be restarted between font installations.
Message was edited by: tompagenet

Thanks for the reply, but the problem is deeper than that. After Illustrator CC, the font is invisible to every program except Illustrator CS6. So it appears that Illustrator CC has "removed" the font from my computer with the exception of Illustrator CC. In any case, I have thousands of documents that use this font. I'm not sure how I can deal with this.

Adobe X - Chinese font missing. After install still does not work

In adobe X when opening some pdf documents, adobe is asking for a chinese font. I have downloaded the font from the link in the message, but afterwards the same error message still appear - also after restart of the whole PC. Running windows XP
Is there somehow that I can check if this has been installed correctly or somewhere there are further logs ?

Hi rossoneris,
Please check the 'Fonts' folder if you have installed Chinese fonts or not.
What error do you get when you try to open the pdf's?

Missing services after installing BAM 10.1.3

I have installed BAM 10.1.3 on my laptop under Windows XP. My database is OracleXE.
Eveything seemed to have worked. But for some reason I only have one Oracle BAM service (Oracle BAM Enterprise Link Data Flow Service). All the other services are not present. When I try to access the BAM console I get server errors...
Does anyone know what the problem could be?

Can you try reinstalling Oracle BAM again ? (donot uninstall old install) Use the same directory names. My 1st guess -is that user pressed finished after EL installation .... and stopped the installation from completion.
During installation -it shows the log file for install -pl verify this log file also for any problems etc. And let us know.
And to double checck- your dos %PATH% variable should have c:\oraclebam\oracleclientforbam as the 1st parameter

Missing drivers after installing Win7

Hallo
On my just new macbookpro, i installed an original Win7 home premium 32bit.
All seemed to go right, Windows is working ok, but most drivers are missing!
How to pick them up from internet if you cant't be connected to??
Where can i find them (the right ones)
thanks

Below is reproduced a procedure the BC Install Manual suggests.The Windows install DVD can do the same sort of thing if it is the Windows drivers that are missing.
You can find the entire PDF document here:
http://manuals.info.apple.com/enUS/Boot_Camp_Install-Setup10.6.pdf
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorer and double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions. If a message appears that says the software you’re installing has not passed Windows
Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example, if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.
To reinstall a specific driver:
1 Insert your Mac OS X installation disc. 2 Quit AutoRun if it opens. 3 Using Windows Explorer, locate the driver that you want to reinstall. 4 Open the driver to start the installation.

Missing dock after installing maverick

Have just installed Maverick and the screen display resolution has shrunk smaller than the previous setting.
There is no dock on the screen to enable me to go into system preferences to alter the resolution.
Help !!!

This solved my problem
1. Open 'Terminal';
2. Copy this text (without comas): '' mv ~/L*/Application\ Support/Dock/*.db ~/Desktop ";
3. Press Enter; (Screen will flash and icons, dock & finder will disappear for some seconds! In the end, everything will appear on screen!
4. Restar computer;
5. Immediately after turning it on, press AT THE SAME TIME: Command + ALT + P+ R
6. The screen will flash & you'll hear the booting sound again! Then you can let go teh keyboard.

Two missing drivers after instal

Hi
I recently had to complete a fresh OS instal following the PCI card which ceased to want to be recognised by Windows.
That cured the problem but am left now with two devices not being recognies by the syste. One is SM Bus Controller and the other just states Unknown device.
I also note that it is only seeing one of the hard drives now and none of the ThinkPad short cut buttons work.
However, the lap top is funcioning normally.
Does anyone have any idea what could cause this, have I missed a step somewhere.
Thanks in advance,
Liam
Solved!
Go to Solution.

It sounds like it may be your Intel Remote Systems Management, if I'm correct then try rebooting into your BIOS menu and find the Intel SM manager menu and disable it at the low BIOS level.
At next boot, the devices should be hidden from the OS and the new hardware detected issue / devmgmt.msc unknown devices should be gone.
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

Missing features after installing upd

recently downloaded and installed driver update SBAX_PCDRV_LB_2_8_000.exe? and since having done so when I click on "Equalizer" button? a gray box the size of old equalizer pops up with "OK" and "Cancel" buttons in top right corner and in center of box,? message:? TODo: place dialog controls here............also get cteq message box with out of memory message..............this is with very minimal processes running and machine has 3GB of ram. SO i know machine isn't out of memory? card is audigy2ZS? the new drivers sound? a lot better than old ones and love the mono and stereo input options as this machine is used for recording. Help would be greatly appreciated. would love to get some input before doin uninstall or system restoreMessage Edited by bongofury52 on 08-23-2008 04:53 PM

Hi,
To verify your account, please refer to
http://social.msdn.microsoft.com/Forums/en-US/36568072-130a-4c9d-a21e-bb28ce1dff1b/verify-your-account-12?forum=reportabug
And then upload the image here.
Andy Altmann
TechNet Community Support

Missing features after install

I have just noticed that I do not have the "append to registry" and
"prepend to registry" features in my Zenworks 6.5.
What could have caused this?
Any ideas on how to fix it?
My Lab which was installed identically has this feature.

Try reinstalling the ZENworks plugins in your copy of C1.
In fact, you could likely just copy the C1 from you lab to your production
PC.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"Phil" <[email protected]> wrote in message
news:_zoii.2191$[email protected]..
>I have just noticed that I do not have the "append to registry" and
>"prepend to registry" features in my Zenworks 6.5.
>
> What could have caused this? Any ideas on how to fix it?
>
> My Lab which was installed identically has this feature.
>
>
>

Missing pictures after install

I have installed Photoshop and Bridge CC using Maverick. I no longer have my pictures from CS 4 in Bridge CC or Bridge CS 4 (or anywhere I can find them for that matter)

Will not affect your folders. Images will be is same location. You wlll have to rebuild the cache as CC can not read CS4 cache.

Satellite Pro 4600 Missing Sound After Installing Windows 98SE

I have installed Windows 98SE onto my 4600 whose specs are:
Model PS460A-04163
P850 14TX 128M 20 DVD ML
I have no sound at all and all sound options are grayed out. I have downloaded a sound driver from Toshiba (Yamaha AC-XG ?) but maybe it was not the correct one. Can someone point me in the right direction for the correct sound driver. I'm also not sure what "series" this model comes under. Thanks for your help. Sep.

Thanks for that. I have tried the Canadian site however the model type I have (PS460A) doesn't exist on their search selection drop down for Part Number. Perhaps it is know as a different model in other countries (I'm in Oz)? Maybe it doesn't matter and I can just pick one of the other 4600 models - I'm unclear on this. Can anyone confirm? Thanks again.

Re: HP OfficeJet 4500 G510N-Z and Windows 7 Home Premium. Always Missing Driver after Install

I have a J4680c and I'm useing mac OS X 10.6.8. How do I go about obtaining soft ware and drivers ?
This question was solved.
View Solution.

Hello @r56,
Thanks for getting back to me regarding this driver issue. I am very happy to hear that the driver link I provided you ended up correcting your issue.
If you feel that the information provided in my prior post resolved your issue could you please mark my post as an Accepted Solution so other users of the HP Support Forums can quickly and easily find this fix.
Thanks again for reaching out to the HP Support Forums. Have a nice day!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Missing file after installing software for Officejet 6210 All-In-One printer.

I got the following error message: "The file C:\{Program Files\HP\Digital Imaging\skins\oov1\skin.xml does not exist". Can anyone tell me where to get the file and then how to download it? Your help will be much appreciated.

HI knewsomga,
WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
Please follow the instructions below.
Please hold down the windows flag key and the R to open the Run box.
Type services.msc and press Enter
Locate Windows Image Acquisition (WIA)
Right click and open Properties
Stop the service from the General tab and then Start it again
Verify that the Startup type is set to Automatic rather then manual
Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
Click here to download and run the utility > HP Print and Scan Doctor
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Missing templates after installing 10.1.3 - no diagrams

Similar Messages

Maybe you are looking for