Missing Text in embedded PDF Window

Hi,
We have one application in which we embed Acrobat(8.1.2) and that whole application is embedded in IE(7.0) Browser. So when I open any pdf document in that application thru IE 7.0 browser, Text or content of pdf document are not coming, while navigation panel and other icons are coming in the PDF window.
I also obeserved that, when I embed acrobat as popup window (not as a child) then things works fine but that's not our requirement .
Any Idea why this problem is coming ?
Regards,
Arvind

We changed the embedding model with Acrobat 7 - from inProc to the other type (or maybe it's the other way around - I always get them backwards). Regardless, Acrobat 7 and later embed using proper COM embedding techniques, while 6 did not.

Similar Messages

Psc 1315 all-in-one.missing text when using scanning window

hello everyone, i am new to all this forum stuff...i have a psc hp 1315 all-in-one printer..it works fine when i print a document THROUGH my pc, as the computer automatically aligns the page...but when i place a document on the viewing window under the lid, and push the relevant button/s ON the printer,manually, it comes out with about an inch of the text at the bottom, missing, and about the same vertically down the right side....
i have tried the troubleshooting/help pages, on the hp website,+ the printers user manual, but no joy...i am no expert on printers so i don't want to do anything major,until i have sought proper advice....i hope i have been specific enough
heres hoping that there are some out there who can help.
have a nice day
mr nice guy

What program are you printing from? It would appear your are printing in graphics mode (rather then black text) and that your printer is running out of cyan ink.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Missing text after Adobe PDF printing

I have put together a word 7 document with pictures then on top of the picture I have put a "call out" box with text in. After the PDF has printed and the review of the document pops up on screen, less than half of the text is shown in the call out box and in some instances the box is blank. Its a report that has to be completed by Tuesday so your assistance would be appreciated

General Acrobat Problem Steps
If you are having problems creating a PDF, there are two steps you should do FIRST
Go to the appropriate vendor web site and apply all updates to the program you are using (several recent messages have concerned problems with MS Office conversion, with the response that different versions of Office have different BUGS that must be fixed by a download from Microsoft - and MS Office products are not the only ones which may, from time to time, need to be updated to work properly)
Apply all updates IN NUMBER ORDER
Acrobat Update http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
Also, for Office 2007, see if this Microsoft product will work for you
http://www.microsoft.com/downloads/details.aspx?FamilyId=4D951911-3E7E-4AE6-B059-A2E79ED87 041&displaylang=en

Missing text in my PDF watermark. How do I fix?

I've created a PDF to be used as a watermark The PDF that I will use as a watermark looks fine. All the text is there. When I apply this PDF as a watermark, some of the text dissappears. I'm not sure what is going on.

Hi Jo Anne de Guzman
Please visit the following article to create watermarks. It gives you options to create the watermark with and without the open document:
http://helpx.adobe.com/acrobat/using/add-watermarks-pdfs.html#add_or_replace_a_watermark_w ith_no_document_open_windows_only
You do not need to create PDF to be used as watermark.

Missing text in PDF when I use Acrobat 9.2 and FM 9

I was able to PDF ok from FM9 using Acrobat 6, but when I upgraded to Acrobat 9.2,
I'm getting some missing text in the PDF. Some non-bold text is missing. The number
for Chapter 3 is missing in the TOC. Any suggestions?

I was able to PDF ok from FM9 using Acrobat 6, ...
What font name, format (TTF, PFB/PFM, OTF?) and vintage?
Did you upgrade the fonts when upgrading the apps?
Any chance you have multiple copies of the same typeface name installed? Historically, having both the TTF and PFM (Type 1) of the same name installed could have undesired results.
... but when I upgraded to Acrobat 9.2, I'm getting some missing text in the PDF. Some non-bold text is missing.
What is "some text"? Some entire typefaces (all text thereof), or just some characters of a typeface, like, say, the ligatures in Helvetica.
The number for Chapter 3 is missing in the TOC.
What font is Frame looking for?
Also, are you embedding the fonts during PDF creation?

PDF missing text when browsing or linking to a page

Hello,
I have an issue with missing text in a PDF file when I try and browse directly to a page in a PDF. Interestingly, the text is not missing when you open the PDF and navigate to the same page from within the PDF. The first Character(s) of the title are missing.
The title of this page should say Criminal Justice, but the "C" is missing when you visit this link--
http://www.northeast.edu/Degrees-and-Programs/pdfs/2010-Catalog.pdf#page=103
This only happens if you try to navigate directly to a page. If you use the pagers within the PDF then the text is fine. If you change the link in the url to represent the page you are trying to visit, the characters disappear again.
Any thoughts or suggestions would be very much appreciated.
Thanks!
Derek

Acrobat 9 (professional)
Windows XP
Internet Explorer 7, 8
PDF file is published as compatible with version 6. Original document was published as PDF from Indesign.
Hmmm, I have tested on 4 machines and still get the same results. These machines are all XP/IE machines though. Any other thoughts?

Randomly Missing Text in PDF Created from FrameMaker

This problem relates to a structured FM document, but I suspect it might be a general issue and have posted it here in the general forum for that reason.
I am generating PDFs that are missing text somewhat randomly throughout. I tried searching the forum for solutions, but none of the suggested fixes worked and none of the posts specifically addressed the issue I am experiencing.
I am working in structured FM. The templates we use were originally created for FM8. We use both FM8 and FM10 in our work group. We are able to duplicate the same problem in both versions and on multiple computers.
I thought I had narrowed the problem down to certain paragraph formatting, since it only ocurs in three or four paragraph formats (a bullet list, table text, etc.) Garden variety formatting. But in most places in the document, these formats appear perfectly. The strangest occurence is a single intance where the page number is missing from the footer.
I thought it might be a font issue, as I've had similar issues in the past. I had a missing font warning in the console, but I am pretty sure that this has nothing to do with it, since they are fonts we are not using and all the other text from the same formats appears.
I tried turning off "Remember Missing Font Names" in preferences. No help.
I checked that the fonts are in the local directory and appear as embedded subsets in the PDF.
I also tried checking and unchecking the "Rely on system fonts only; do not use document fonts" option in the PDF output settings. Also no help.
The randomness of the missing fonts bewilders me and I've exhausted my own troubleshooting abilities. I would be happy to share a source file if anyone thinks they could help me that way.
Thanks in advance,
Douglas

There is a known bug in Windows XP that causes random dropped text in
PDF. The hotfix is here, though the link does not seem to be working at
the moment:
http://support.microsoft.com/?id=952909
However, the above link directs you to a download link that is here:
http://support.microsoft.com/Hotfix/KBHotfix.aspx?kbnum=952909&kbln=en-us <http://support.microsoft.com/Hotfix/KBHotfix.aspx?kbnum=952909&kbln=en-us

PDF has missing text when created from FM 9

My Software:
Windows XP Professional Version 2002 SP 3
FrameMaker 9.0p255
Adobe Acrobat 9 Pro Version 9.4.1
When generating a PDF document from FrameMaker, the PDF document has random missing text, including whole paragraphs, sentences and some text in tables. We have several FrameMaker books and they are all having the same issues. These books were fine when we last published updates within the last month and we have not made any changes to fonts.
When generating a PDF from FrameMaker, we always print the book to a postscript file first following these steps:
- Go to File > Print Book.
- Select the Adobe PDF printer.
- Select the Print to File option and specify a .ps filename.
- Select the Generate Acrobat Data option.
- Use Acrobat Distiller to convert the PS file to PDF.
Note that I also tried File > Save As PDF and got the same results.

Did you reboot after the hotfix? fwiw, other users on the forum have had difficulty with the hotfix not being installed correctly the first time around.
once you download the hotfix from MS you have to run the .exe, and then when it’s finished you have to reboot. Then check the Add or Remove programs in Control panel, and click the “show updates” button, then scroll way down to see the hotfixes, to be sure that #952909 is shown.
What fonts are you using in your documents? Specific type (PS, TT, OTF) and any other info you have (foundry, etc).
Do the "gaps" seem to occur when there are font changes in the document, e.g. when words in a sentence are bold or when a paragraph in a different weight (e.g. bold italic) follows, say, a "regular" text weight paragraph? As another test, can you highlight a segment of good+bad+good text in the PDF, do Control+c to copy it to the clipboard, then Control+v to paste it into a different file (Word, text editor, even another new FM document). Do the words of the "missing" text segments show up?
edit: the hotfix download process is a bit confusing; if I remember correctly it has to be requested, then MS sends a link to the download webpage, then the downloaded .exe has to be run.

Embedding Full-text Index into PDF File

Hello Everyone,
I've tried to create and embed full-text index into PDF file, but with no luck. I've followed steps described at http://help.adobe.com/en_US/Acrobat/9.0/Standard/WSC28D4DBB-6A78-4027-9E04-F50FE411CFB9.w. html - there can be seen progress of collecting of data and at the end the button Update index is enabled. This is signal for me that Index was created. After clicking on Ok button, saving document as new one and then reopening "new created" document, there is info that no Index is embedded in the Manage Embedded Index dialog. Is there any other step necessary to do? Or is it bug? Adobe Acrobat Pro 9.1 on Windows Vista 32bit is used.
Jan
PS: Interesting is also comment at the bottom of above mentioned help page...

Thanks for the response. It is true that if I make changes and look at the embedded index status, it shows that it needs updating
However the problem I can't get around after extensive testing is that sometimes for no apparent reason the index is dropped on save. This can happen if I check the status of the index to make sure it is valid, save the file, and reopen it.
I've concluded that this must be a bug and am using other indexing options for the time being.

Is there a solution to PDFs missing text?

Hi there,
I've been having a problem with PDFs generated from documents created in Frame 9 missing random blocks of text. From reading the forum, I see that this is a well known issue. I've tried both the MS hotfix and deleting the fntcache.dat file. Deleting the fntcache.dat file is the only thing that has worked. Has anyone else run the hotfix without any positive results? Am I doomed to deleting fntcache each time I want to create a PDF?
Any insight is much appreciated. Thanks!
Jeff

Arnis Gubins wrote:
Are you by any chance using any of the OTF Pro/W1G/COM type of fonts? Are you also using CMYK PDF generation? If so, then this is a known bug.
Well, the known bug with many of these fonts is: text is displayed with the TimesNewRoman font. I didn't have missing text blocks using them, and I'm not aware of anybody else who has.
The MS patch should definitely work. It does work here on all machines (all running Windows XP Pro SP2(!)). I know of some other font related problems with XP SP3.
If it still doesn't work: deleting the fntcache.dat is not necessary for each PDF, it's necessary once a day. The daily procedure in this case is:
- Start your PC
- Delete the fntcache.dat
- Reboot
Now PDF creation works as expected, until you reboot again. If you have to do this for whatever reason, delete the fntcache.dat again before rebooting.
Bernd

Using Create PDF from Web Page; Resulting PDF is missing text

Trying to create pdf's from various web pages. Generally process works very well but some pages have missing text and bad formatting.   Specifically; http://www.robinhood.ca/Recipes/Occasions/Spring/Apricot-Tartlets
When I create the PDF; I am missing the text under "directions" and the description is truncated and forced to the far right.
Seems like I am missing a formatting or font setting but I have adjusted everything I can think of and have had no luck.
Running Acrobat Pro XI.
Anybody have any thoughts?

yes; looking at the source; seems that <table> is being captured correctly but the part that is missing is a <div>.    I'm not an expert at deciphering the page source but seems like that is the problem.
Is there a work around?
when I print via the firefox plugin it prints fine. but i ultimately want to capture several layers on the site if I can get the formatting resolved.

Missing text after EXPORT from PMD to PDF

Hi,
I have a document, designed through Adobe pagemaker 70, which I would like converted to PDF. Within Adobe PageMaker 70 I performed a File-->Export-->Adobe PDF, kept all the default options and managed to generate a PDF version of the *.PMD document. However, some of the text in the PDF document is missing. I searched on the internet and discovered one can do Document-->Examine Document within Adobe Acrobat 9 Pro to display any hidden text. Doing this I was able to see the missing text.
There is an image in the source Pagemaker document, but the image is not square but cropped along it's outside edge and the text flows around the edge (hope that makes sense). What's puzzling is that in Adobe Acrobat 9 Pro the generate PDF has the image displayed in a box and some (not all) the text behind this box is shown as hidden, where as in the source document all text flowing around the image is visible.
Can anyone please help with this problem and tell me how I can get the hidden text in my PDF document to display so it's visible in an Acrobat Reader or when printed?... I am still a bit of a newbie with both Pagemaker and Acrobat so your help would be much appreciated.
Thanks in advance.
Sharon
PS: I have not uploaded the file but do not mind doing so if some one is able to help and requests either the source PMD file or the generated PDF file

Hi,
The "question mark" displayed may be refereed to the missing font.
Are you trying to convert a public web page? if yes then please share a link so that i can also test it.
Regards,
Anoop

Missing Text when using CONVERT to PDF

I am using Acrobat Pro 9 in Wnidows 7 and Microsoft Publisher 2003.
When I use the CONVERT command to create a PDF - it is missing all of the text on the master page.
If I create the PDF with the PRINT command - everything is OK.
PS: The same Publisher File on another computer using Acrobat Pro 8 works fine - CONVERT or PRINT and no missing text
I prefer to use convert because sometimes the PRINT command drops some of the hyperlinks.
[edited by forum host - email removed]

Hi,
Could you mail be the file with which you are seeing the issue. I will investigate at my end to see what the issue is. You can mail me at [email protected]
Thanks,
Love Bisht

Placed PDF missing text after re-exporting to PDF

I'm using OSX 10.6 with InDesign CS3 504.
When I place PDFs into an InDesign file, and then PDF that InDesign file, some of the PDFs are missing text. All text boxes have been made from the same original text box, just modified for content, and shape very slightly.
The text that is missing is most often white, where it's being used over the top of black frames. There is one instance of black text over a white frame missing.
I've tried exporting to .inx, and then re-pdfing. I've also tried copying text boxes that are 'working' and changing the content, but still the same text boxes are missing their text.
Any help much appreciated. Thanks.
Message was edited by: agreen01

i already tried exporting to .inx about 3 hours ago. unfortunately i'm very pressed for time with a meeting in about 1 hour, so i've recreated the problem text boxes. luckily there were only about 10 of them and it only took 10 mins.
before that i tried to isolate the problem element, but couldn't find one. every time i removed something, i still got the problem. the only time i didn't get the problem was when i had just the text boxes on their own, with none of the other essential page elements.
thanks for your help, though.

Text rendering for PDFs using Reader 10, 11 in Windows 8

Shortly after a Reader update to 11.02, around March 1st, I noticed that the resolution for text in my PDF files is terrible. It does not get better by zooming in or out. I thought it was the update, but I am having the same problem with v10.
What happened? It was working just great, and now it is hard to read. What did I do?

Moved the discussion from Adobe Reader Touch for Windows 8 to Adobe Reader (desktop app).

Missing Text in embedded PDF Window

Similar Messages

Maybe you are looking for