Missing the jbo:PostChange in UIX ????

Hello
I studied the old OnlineOrder Application (BC4J). In this application the primary key for the order entity was created through a trigger on the order table. Before doing a <jbo:commit> there was posted a <jbo:PostChange> to send the rowdata to the isolated database session, in order to produce the new primary key for the Bc4J row.
The same way i want to work with UIX.
For background: I use postgresql as database and so i can't use the SequenceImpl in the create method of my BC4J entity to get the primary key; i usually do my own jdbc-select ow this new value in the create method; this works without problem in BC4J-JSP applications. But with uix the value of this new key is differently rendered depending on the browser i use. In mozilla for example i always get the value 1, always. In konqueror i get the right value, Internet Explorer also. To undergo these problems i want to produce the value in the way i described above. But i always get problems because there exists no way to post the data to database without committing. There is no <bc4j:PostChange> only <bc4j:commit>!....
Anybody knows a workaround??
Carsten

merging with thread
Complent for jbo:PostChange in UIX

Similar Messages

  • Complent for jbo:PostChange in UIX

    Hello
    I studied the old OnlineOrder Application (BC4J). In this application the primary key for the order entity was created through a trigger on the order table. Before doing a <jbo:commit> there was posted a <jbo:PostChange> to send the rowdata to the isolated database session, in order to produce the new primary key for the Bc4J row.
    The same way i want to work with UIX.
    For background: I use postgresql as database and so i can't use the SequenceImpl in the create method of my BC4J entity to get the primary key; i usually do my own jdbc-select ow this new value in the create method; this works without problem in BC4J-JSP applications. But with uix the value of this new key is differently rendered depending on the browser i use. In mozilla for example i always get the value 1, always. In konqueror i get the right value, Internet Explorer also. To undergo these problems i want to produce the value in the way i described above. But i always get problems because there exists no way to post the data to database without committing. There is no <bc4j:PostChange> only <bc4j:commit>!....
    Anybody knows a workaround??
    Carsten

    Someone suggested that you do your PostChange in your event handler.
    I hope that helps!
    Jeanne

  • Jbo:InputSelectLOV using UIX

    Hello, I'm building an application using Business Components and UIX - JSP. I want to put a Combo Box or a Drop Down control that shows the information (an attribute) of another table, but when I use the jbo:InputSelectLOV, it apears at the top of the page.
    How can I put that control where I need.
    Best Regards
    Santiago

    Wrap the jbo tag inside of a uix:rawText tag and it will show up in the right location in the page.

  • HT4970 does any one else miss the month at a glance that the old version of reminders had? I wish Apple would bring that feature back.

    Does anyone else miss the month-at-a-glance feature from the old version of Reminders app? I wish Apple would bring that feature back. It made it very convenient to schedule for the future.

    You  can send feedback and let Apple know
    http://www.apple.com/feedback/

  • BT Vision + box ( black box ) - Missing the end o...

    Fitted new BT Vision + box to allow me to have BT Sport in August 2013 . I don't have Infinity as my house doesn't have a Fibre Cabinet yet . All is working OK apart from we regularly miss the end of programmes which have been set up to record . I never had this issue with the Silver BT Vision box for the many years I have been using BT Vision. Im pretty sure lots of other people have this issue , can someone advise of a fix for this or is  the New BT Vision + box not up to the job or is there another explanation . I rang technical helpdesk which was offshore only to be told sounds like an issue with our Freeview signal missing the end of programmes . 
    Mike in Dundee     

    Hi 802502696,
    For help with this issue check out this link
    If you're still having problems after following this advice reply back on this thread.
    Cheers
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I'm missing the back cover and flap for my book. Doesn't show up in the interface. How can I restore these?

    I'm missing the back cover and flap for my book in the layout interface. Does anyone know how to restore these?  I've searched the interface but can't find an option to add cover/flap. Don't want to order a book without it.
    Any advice is welcome!

    Time to repair you library: do the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
    2 - run Option #4, Rebuild Database.
    3 - if necessary repeat with Option #1, Repair Permissions.

  • So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

    So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

    you can try this thread maybe? https://discussions.apple.com/message/16217061#16217061

  • It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

    It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

    My hard drive continually has the floating beach ball and will take massive time to fulfill a request. And then will not boot up...so then I have to do a restore and rebuild hard drive from a past saved time machine version. Works for a little bit...then the floating beachball comes more and more...until it will not boot up again. So then I restore from a previous time machine saved version....and again it works for a day or so ... until it happens again. Now it's happening faster and faster...so I think my hard drive is dying.

  • I recently transferred my ITunes library to an external hard drive.  I made sure to copy all the data from the saved location.  After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.

    I recently transferred my ITunes library to an external hard drive.  I made sure to copy all the data from the saved location.  After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.  Is there any way to recover the data?  Thanks for any help.

    I may have found an answer here:
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
    They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
    Message was edited by: williamson42
    Message was edited by: williamson42

  • HT1766 I have manually back up my iphone few days back, and my contact got missing the next day. i restored my back up from iTunes, however, my contact did not get restored. How do i check if the manual back up did actually back up my contact or not?

    I have manually back up my iphone few days back, and my contact got missing the next day. i restored my back up from iTunes, however, my contact did not get restored. How do i check if the manual back up did actually back up my contact or not? How do i get back my old contact in my phone?

    Your entire second paragraph is so confusing I am going to ignore it.
    But I may be able to answer your first and third paragraphs, which seem to address the same question.
    I wonder where your iPhone states it was backed up yesterday.  I am going to assume that you see this under Settings > iCloud > Storage & Backup.
    If that is true, then the backup from yesterday is in iCloud.  The one and only way to restore an iCloud backup is to do this on your iPhone:
    Settings > General > Reset > Erase All Content and Settings
    That will cause your iPhone to begin a setup process.  As part of that process, assuming you enter the same Apple ID you used when you created the iCloud backup, you will be offered the opportunity to restore from it.

  • I am missing the add objects section from the fly out menu in Photoshop CS6. 3d workspace

    I am missing the "add objects" section from the fly out menu in Photoshop CS6. I am in the 3D workspace of Photoshop. "Scene" is highlighted and I have clicked on the little fly out menu in the upper right hand corner of that panel. The whole section that should contain, Add objects, delete objects, duplicate objects, all the way through reverse order is missing. The add lights section above and render section below it is there. I am not new to Photoshop, but I am new to the 3D section of Photoshops work space.
    I do know about creating a new layer in the layers tab and merging the objects together trick. But I kind of would like for the program to work correctly as I am sure that doing it that way will cause some sort of problems later in the work process.
    Below are the specs of my system.
    Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
    Operating System: Windows NT
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2394 MHz
    Built-in memory: 32651 MB
    Free memory: 28832 MB
    Memory available to Photoshop: 29606 MB
    Memory used by Photoshop: 89 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Basic
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: Intel
    Video Card Renderer: Intel(R) HD Graphics 4600
    Display: 3
    I am actually running windows 8. So I am not sure why it is saying windows NT. Anyway...
    Photoshop says that my software is up to date. I use Photoshop daily and everything else works just fine. I have looked through this forum and there is someone else who had the same issue as me but their question was not given a solution. So that is why I choose to post it again.
    Any help will be great. Thank you!
    Mark.

    I've made tests with four different 3rd party tools: OpenGL Extension Viewer, GPU Caps Viewer, Compute4Cash OpenCL Diagnostic Tool and Mudlord's Glide3x wrapper tester. All those tools report no problems with my video card driver and OpenGL/CL.
    I have contacted nVidia and based on reports from the tools and visual tests from GPU Caps Viewer nVidia support doesn't see a problem with my driver.
    I found sniffer_gpu.exe which according to Adobe Help pages is a kind of diagnostic tool and determines whether Photoshop uses the graphic card OpenCL or not. Here is the output:
    Device: 00000000002B1BE8 has video RAM(MB): 1023
    Vendor string:    NVIDIA Corporation
    Renderer string:  GeForce GTX 650/PCIe/SSE2
    Version string:   3.0.0
    OpenGL version as determined by Extensionator...
    OpenGL Version 3.0
    Has NPOT support: TRUE
    Has Framebuffer Object Extension support: TRUE
    OpenGL ok
    OpenCL ok, version=1.1 CUDA 4.2.1
    Return code: 3
    From Adobe GPU Sniffer tool, it looks OK.
    On the other hand, I have your word that there is no problem with Photoshop not recognizing OpenCL for my card and that nVidia driver has problems. Can you justify this somehow? Perhaps you could provide more details on technical level, or another utility to run and extract details, to at least identify the problem Photoshop has and hopefully solve it on either side.
    P.S. During tests there were two things which I noticed, but they are probably not related to the issue:
    1. One tool reports the lack of Windows registry key SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers. But according to your previous statement, Photoshop only uses OS calls, no registry and according to nVidia, this key is not used in Windows 7.
    2. During some tests GPU Caps Viewer reports that "OpenCL CPU not supported on the selected platform". This is not complaining about GPU, only about CPU. But Photoshop is complaining about GPU, so it shouldn't be relevant.

  • Hi all, i am missing the output to web and pdf in Bridge , any option to get it in the bridge from adobe creative cloud

    Hi all, i am missing the output to web and pdf in Bridge , any option to get it in the bridge from adobe creative cloud
    @bridge

    Have a look at Install Adobe Output Module

  • Why are some of the Music Video's/T.V. Videos missing the vocals on my Nano

    I downloaded on itunes some Music Video's and some t.v. videos and put it on my nano 4th gen a couple of them are missing the vocals. Does anyone know how to fix this? I don't know why it happens on some of them and not all of them. It plays fine in itunes on my computer.

    Aec, I'm have the same issue as well with mine.  I deleted some music a few week back to give room for sum pics and movies and now that i want to restore them from off my itunes only 1 or 2 songs are actually able to play and the rest out of the albums are greyed out and non responsive.  Have never had an issue like this b-4.  Anyone have any insight or some problems?  Thanks in advance.

  • "Save as" misses the point

    Hi,
    the Save as… function is back which makes me quite happy.
    But after using it the first time with preview, I am greatly disappointed. It doesn't work the way it previously did and should work. I cropped several images and hat to manually recover all of the originals because they were automatically saved with the same changes as the new copies. I have the feeling that the developers didn't understand what "Save as" is and why it is so useful. Right now it's just duplicating.
    The Save-as concept works this way:
    - Open a document (file)
    - Edit it
    - Decide that these changes are worth a new version of your document (developers call it fork or so)
    - Choose the menu item "Save as" to save the changed document as a new one
    - The original document remains untouched in it's place
    It is self explanatory that I save the changes into the new document, but not into the original.
    This should apply even though "Autosave" is on and the original document is closed automatically. –> Design error
    Additionally I had turned on the option "Ask to save before closing...." but the system didn't ask, it just saved and closed the file automatically. –> Bug
    What Mountain Lion did when I edited my images: It saved all changes to the new AND the original images. All the originals were also cropped and I had to use the star wars mode to recover every image one by one. Frustrated would be an understatement.

    Since Steve has died, things are getting worse!
    What kind of idiot had the idea to change something which cannot be made better?
    Confusion all around and loss of data is the result, because it is different in different applications too.
    http://www.golem.de/news/mac-os-x-10-8-speichern-unter-ist-keine-gute-idee-1208- 93644.html
    http://macperformanceguide.com/LionHairballs-SaveAsGone.html
    Let`s tell Apple that they missed the point how computers an human beings work.
    http://www.apple.com/feedback/macosx.html

  • After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

    After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

Maybe you are looking for