Missing the second part of audio tracks.

While importing clips sometime only comes the first part of the audio track - the seecond part is not available. What is wrong?

What do you mean by "the second part"?
Are you saying that only part of your audio clip is present and that part of it is blank?
What format is the audio -- or is it a video clip? If video, what model of camcorder is the video coming from and what format and resolution is it?
Which version of the program are you using on what operating system?

Similar Messages

I am trying to download Elements 12. I've downloaded the two parts on your web site but when I run the second part it comes up with a message saying 'The file archive part of Adobe Photoshp Elements 12 is missing...'. What shoudl I do?

I am trying to download Elements 12. I've downloaded the two parts on your web site but when I run the second part it comes up with a message saying 'The file archive part of Adobe Photoshp Elements 12 is missing...'. What should I do?

Hello
I’ve managed to get it to work now but not as straightforward as I’d have liked and difficult to find out how to get help.
Rory

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

Second part of audio book will not play.

I recently started to buy and play audio books through iTunes. Three of my books are in two parts. For two of those books the second book will not play. I suspect a syncing issue but can’t figure out how to fix the problem.

I meant to say the second part of two of the books will not play.

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
Thanks in advance for your help!

With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5. This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece. Can I somehow install 10.9

Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5. This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece. Can I somehow install 10.9? And why is apple not allowing people like me to try out this installation? Any reason that are too technical that people like me cannot upgrade and handle?
This would solve many apps to run on this.

It's mainly the video card. The Models 2,1 through 4,1 have video cards with non-upgradeable 32bit drivers. The model 5,1 Late 2008 and newer have at least the NVIDIA GeForce 9400M with 64bit drivers. Mountain Lion and Mavericks require 64bit native drivers. Mountain Lion and Mavericks no longer support Intel's GMA 950 or GMA X3100 graphics processors.
While Lion used some 32 bit and a lot of 64 bit code, Mountain Lion and Mavericks are pure 64 bit, which excludes more systems than Lion did. It's not something you can add memory to, for example, as it involves the base architecture.
http://reviews.cnet.com/8301-13727_7-57470261-263/older-64-bit-macs-out-of-the-p icture-for-mountain-lion/?tag=mncol;txt
http://reviews.cnet.com/8301-13727_7-57387846-263/will-your-mac-run-mountain-lio n/

I missed the second day free application from itune 12 Days of Gifts. Where can I download again. What was the second day free application ?

I missed the second day free application from itune 12 Days of Gifts. Where can I download again. What was the second day free application ?

Yesterday's app here in the UK still appears to be free (at the moment) to download (I don't know what the app's normal price is) : Score! Classic Goals. If it's not free in your country's store then if you want you will need to buy it.

What is the shortcut to lock audio tracks? (like in FCP)

what is the shortcut to lock audio tracks? (like in FCP)

Hi basvanteylingen,
That feature is coming in the next update.
Thanks,
Kevin

HT204365 Hi I wonder if you could please assist me. I tried the online 'contact us" I chose my iPad - but when I need to chose the second part - it does not give me any options - hence I cannot go further? My kindle does not want to open on my iPad.

Hi
I wonder if you could please assist me. I tried the online 'contact us" I
chose my iPad - but when I need to chose the second part - it does not give
me any options - hence I cannot go further?
My kindle does not want to open on my iPad. When I touch it - a grey screen
with kindle written in the middle appear for a few seconds. Then goes away.
I have restarted the iPad - still the same? What else can I do?
Thanks
Maryna

Judging by the reviews of the current version of the Kindle app you aren't the only one haveing problems with it - it looks like Amazon need to fix something with the app.
Have you tried closing the Kindle app via the iPad's multitasking bar and seeing if it works when you re-open it ? Double-click the home button to open the taskbar, and then swipe or drag the Kindle app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
You could also try deleting the app and redownloading it via the Purchased tab in the App Store app on it (you will then need to redownload your books in the app, assuming that it opens).

I have tried to download an audiobook that has Two parts. The second part of the book downloaded. But the First point did not. I keep getting "Part 1 could not download at this time". How can I get it to download?

I have tried to download an audiobook that contains Two Parts. The second part was successful in downloading. However, the first part was not. I keep getting "Part 1 could not download at this time". I should have enough space for the download. Any suggestions of what I can do?

Answered in the other thread you posted in:
i am trying to download new software and my mac keeps asking for the administrator name and password... i enter my apple…
Please don't post in more than one place. It can lead to people wasting their time answering a question which has already been answered elsewhere.

How can I change the gain on one audio track in the selection?

How can I change the gain on one audio track in the selection? Is there a way to adjust the gain as it is implemented for example in cubase - pull waveform up and gain varies?

I'm not sure what you mean by "in the selection", or, more honest: I don't understand that at all.
So, instead I'm going to tell you that you can indeed adjust the Gain of one or more selected region(s) in the Region inspector on the left hand side.

Reducuing the volume in the middle of an audio track

I am having a problem trying to figure out how to reduce the volume in the middle of an audio track. Can someone enlighten me?

Brucek75,
There are several ways to attenuate Volume of Audio in PrE. This article goes into detail on several of those: http://forums.adobe.com/message/3472343#3472343
The Audio Volume Keyframes (applied in at least one of two ways), will do exactly what you want.
Good luck, and hope that helps.
Hunt

How do I apply a fade to the end of an audio track?

I'm using Captivate 7, and have added one of the Gallery sounds to a slide in my software simulation. I want the track to fade at the end of slide, so I guess I need to apply an effect. All the help refers to "clicking the triangle next to the audio track name" to expand the track for editing, then goes on to talk about keyframes. I don't see a triangle next to the track name, or next to anything related to the track. I am in the Effects workspace. Also, on the EFFECTS tab, all the selections are grayed out.
I also tried adding a fade by using the settings on the PROPERTIES tab, but it doesn't affect the playback.
How do I apply a fade effect?

Effects have no relation whatsoever with audio clips, I don't understand why you were looking there.
You can edit audio, and to get into the editor there are several ways. If this is slide audio, the clip is visible on the timeline and right-click menu has an option Edit. Another way is to find the clip in the Library, and the right-click menu on its name has more options, not only Edit in Captivate, but you can also use another application which I would recommend. The audio editor in Captivate is pretty limited, I'm using Audition, but Audacity is free to use.
For an easy way to have a fade out (you can time it, not the way of fading like in a real audio editor), you don't even need the audio editor in Captivate. Look in the Properties panel, part Audio and you'll have Fade in and Fade out.

How to Equalize volume between parts of audio tracks

Dear Experts:
Using PRE 7 I have created a video using different recording devices (camera, lavalier, direct into computer) and since I have defective hearing I have a hard time making the different sections of the audio track at the same audio output level when I make/play the dvd it goes up and down in a very disturbing way to most viewers.
The yellow rubber band method is not very accurate and even tho I try to make all the same level, since some of them were recorded "louder" than ot\hers originally the db settings dont help. When I try the audio mixer approach same problem.
Is there anyway to highlight all the parts of the total audio track and make them all the same level?
Appreciate any suggestions.
Tom

Tom,
The Audio Mixer can be used in several ways.
1.) it can be used to monitor the Levels, just like with the Audio Meters
2.) it can be used to adjust an Audio Track statically and for the entire Audio Track (more on this later)
3.) it can be used to apply Track Keyframes, when the Slider is adjusted during playback. This creates a lot of Track Keyframes, and I have changed the default timing of those Keyframes, as the default seems too frequent for my needs.
Now, one workflow would be to place your loud Clips onto one Audio Track, and the ones with the proper Levels on another. Then, in Audio Mixer, adjust the Track w/ the too loud Clips, down a bit. Playback to test and adjust (not while in playback) to suit.
I use #2 and #3 most often.
As Steve points out, the Clips can have their Volume changed, with the fixed Effect>Volume. This can also be done several ways. One of the first things that I would do is zoom in on the Timeline horizontally, until just my Clip was occupying most of the visible area. Next, you can click-drag on the Audio Track's Header junction, to expand that vertically. This can be a bit tricky, as finding the right point to click-drag is like searching for pixels. Between the Audio Tracks and in the Header area, slowly move the Cursor, until it turns into parallel lines with arrows, click and drag to expand that Track vertically. This will show the yellow "rubberband" more clearly. Now, if your change is to be static, only affecting that Clip and all of that Clip equally, just click on the rubberband and slowly drag it up, or down. If you wish to do this Volume change dynamically, then you will want to add Keyframes. I find this much more easily done in the Effects Control Panel (with Clip Selected, Edit Effects), and use the little Timeline in it. With the fixed Effect>Volume, you would toggle the "stopwatch" so that Keyframes are active, and add those to adjust/modulate your Volume. Here is a look at the Effects Control Panel from PrPro 2.0, which is closer to the one in PrE 8:
Hope that this helps.
Also, there are several articles on Keyframing basics by Steve, on the Muvipix site.
Good luck,
Hunt

Ripping the background using two audio tracks

I have two audio tracks for a show. One is in English the other in Japanese. Both have the exact same music and sound effect. But different voices. Is there a way I can perform an operation that leaves me with the background audio alone?

cubearth wrote:
Do you know of any program that can do such a feat?
Audition does what's possible (see Durin's answer) as well as any software can. If you are dealing with mono files, then SuiteSpot's answer is the gospel truth - and that goes for all available and unavailable software.
Basically, you have to have some means of isolating a particular part of something in a unique way - this is how the Center Channel extractor works. The thing that this does is to say that a signal that's only in one location in a stereo field can be isolated - just by its position, nothing else. So if you have a mono voice superimposed on a stereo background then the mono voice can be isolated. But because it's by position, then anything else at the same spatial spot will also be eliminated - and almost inevitably this will mean that part of your music track will be extracted as well, so it's not going to be perfect.
Please, just don't believe everything you hear on CSI (or any similar crime show). What they purport to be able to do forensically simply isn't possible in the way they appear to claim.

Missing the second part of audio tracks.

Similar Messages

Maybe you are looking for