MISSING: Time, Date, Battery Info

Since the new update, the Time, Date, Battery Info, etc that is normally in the top right hand corner toolbar is gone.
Going into system preferences to click the box for time doesn't work, because it is checked.

I am using a Panasonic HDC TM 300.
I have tried copying the individual .mts files and copying the entire folder structur. Neither of these show the EXIF info in the PPro cs 4 metadata (EXIF section).
As I said the date/time info etc shows up in Adobe Bridge.
Am I missing something or is this a problem with PPro cs 4??
Kaybee

Similar Messages

HT4946 I need to print & back-up a series of abusive/threatening SMS (on iphone 5c) for my solicitor. Is there a way to do this which will show the time, date & sender info? How can I preserve (full) SMS data as evidence for future court proceedings?

Does anyone know how to access sms text messages from iphone 5c backup from icloud or itunes? Apparently SMS can be restored so data I need must be stored in backup. I need to print a series of abusive/threatening SMS messages received on my iphone 5c from one sender. I need the time, date & whatever data is stored about source/sender of messages, as well as content. How can I access this data to create a chronological record of the abusive SMS messages and can I preserve the iphone's message log specifically-- so I can access records of these texts without having to restore a back-up? I need to do this to provide evidence for my solicitor and preserve that evidence for future court proceedings, thank you.

http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CMr1..
http://www.ecamm.com/mac/phoneview/

Sms/imessage entries missing time/date stamp

I just upgraded to IOS7. I could not find a way to show the time/date stamp of a text. This I used quite often... for example, if my husband texts me to say he is on his way home, I could look at the time stamp to see how many minutes ago that was. Is there a way to put the time stamp back on the texts like it was in all the previous versions?
UPDATE: The time/date stamp is there, but the frequency that it puts a new time/date stamp must be fairly long. I had a text started with my husband at 4:55. At 5:32 (looking at the time stamp that shows up on my iMac that shows same texts my iPhone does) another text was made. The only way I can tell when the very absolute LAST text was written on my iPhone is to back out to the menu of all my contact listings I have message conversations with. There it shows when last text was sent... 6:20. That is Almost 50 minutes later than the last text, it is almost an hour and a half since the initial text.But, yet all under same text date stamp of 4:55
EXPLAINED A DIFFERENT WAY:
4:55 first text
5:32 additional text
6:20 next text
Only time stamp shown on my iphone is the 4:55, all these texts are under the same time/date stamp. My iMac mirrors the same texts and shows all three incremental time stamps. That is how my phone used to be. How do I get it back?

You should tap you scren and move like you want to move the full scren to the left! A column will appear!
PS: What I think is that @Apple should urgently think more about UX and UI this new IOs7 is amde for pro. UN-HAPPY

Missing time/date stamp

I imported footage from my Sony DCR-HC32 mini-DV into imovie (4.0.1) to edit and when I "shared" it back to my camera the time/date stamp was no longer showing. Just the dash lines at the bottom right corner of my LCD screen. I have done this procedure on many occasions and the stamp is always included. Does anyone know what happened and how can I fix it? I need the time code to appear on my final tape. FYI the clip still shows the date/time when it's clicked on.
Thanks.

You should tap you scren and move like you want to move the full scren to the left! A column will appear!
PS: What I think is that @Apple should urgently think more about UX and UI this new IOs7 is amde for pro. UN-HAPPY

Missing Time & Date setting access

I'm using Snow Leopard on a MacBook Pro. Somehow my System Preference dialog/tool to set the time and date disappeared from every possible access point. So I was going to upgrade to Lion and fix the problem at the same time. But can't sign in to the App Store as it requires a check on the time and date. I was travelling last month and my system is still set at GMT, four hours later than my EST. So sign in dialog doesn't work and nothing with download.

I am using a Panasonic HDC TM 300.
I have tried copying the individual .mts files and copying the entire folder structur. Neither of these show the EXIF info in the PPro cs 4 metadata (EXIF section).
As I said the date/time info etc shows up in Adobe Bridge.
Am I missing something or is this a problem with PPro cs 4??
Kaybee

The top line in my home screen (time, date, battery lvl) is gone. How do I get it back?

It just happened. It shows when I have an app open but not in the home screen. This is IOS7 on an iphone 4s. Anyone else have this or know what to do?

Hi there @ketaminelover,
You may find the troubleshooting steps in the article below helpful.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
-Griff W.

Macbook Pro's time/date and internet preferences reset at battery death.

I have a late 2009 Macbook Pro running Snow Leopard (10.6.8). Since a month ago, whenever I'm not able to get to my charger in time and my battery dies and I reboot it, the time and date settings are set back to December 31, 2000 7.00 pm. I have to reenter my internet and wifi information to connect to the web. No files are lost, but it is still an annoying problem to have to deal with every time my battery dies. This usually happens if I am not able to plug in the charger and turn it back on within about 5 minutes. Is this a common problem? Is anyone else suffering this?
Any suggestions and advice will be greatly appreciated and loved.
Thank you.
~Incho

This is common only when the battery in question is so old and tired that it lacks enough oomph even to preserve the date and time after the machine shuts down. You probably need a new battery, and at least until you get one, you need to avoid being in a situation where you can't plug into AC as soon as the low-battery warning appears. Or perhaps your battery is so far gone that the warning never appears, in which case you need a new battery even sooner.
What does System Profiler > Power say about the condition, cycle count, and full charge capacity of your battery, and is your MBP a 13", 15" or 17" model?

I just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english? ps: i'm hopeless.

i just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english?
ps: i'm hopeless.

So what you want is for it to say Lebanon (English)? If so, see if this helps:
http://m10lmac.blogspot.com/2012/05/fixing-custom-english-region-settings.html

HR Time data button missing despite config in place correctly

The config for personel subarea grouping and absence types is correctly in the IMG. The time data button to record absence directly from IAL log is still missing. What else is required ? Please assist.

Hello,
Absences are directly recorded in the "Time Data" tab of the "Incident/Accident Log: Edit Person Specific Data" screen. This screen is specific to the injured person. Please select the INJ i,e. "Person Affected" role in tab "Involved" on header screen of "Edit Incident/Accident Log". Then navigate to person specific data by clicking on "Details" pushbutton.
I hope this solves your problem if you are not navigating like above.
Thanks & Regards
Pavan

Time Data loading with missing format

Hi expert,
after we load time data, find the following missing information:
0CALDAY:
20.080.112 (Error)
2008.01.12 (correct one)
0CALMONTH:
200.801(Error)
2008.01(correct one)
0CALQUARTE
20.081(Error)
20081(correct one)
Could anyone let us know how to correct data with missing format to correct one and how to do this step by step? Many thank!

What is the source for this data ?
Have it corrected in the source
Or
Correct in PSA and load it from there.
Does it happen only for a few records ?

Record Working Time time data missing after save

Dear All,
I have some problem with my ESS record working time iview (CATW). All this while it was working fine until today, after I click on check entries and the save the time data, there is a message showing that the timesheet had been successfully submitted but the time data is missing form the field.
Normally after I click on check entries and save, I can still see the time data there even I logout and login again. But now after I click save, the data is not there anymore.
Any idea what wrong with it?
Regards,
Bryan

well the times will surely be saved! Please verify
this is just information
If you want to prevent this message to be issued, you
may consider a modification in the relevant function module
HR_BALANCE_TIMES_AGAINST_DWS:
Ganztägige Sätze
   IF BEGUZ_EXP    <> SPACE06       AND
      STDAZ_EXP    >= DAYGEN-SOLLZ AND "<    change in ">"
      DAYGEN-SOLLZ <> 0.
     IF INFOTYPE = '2001'.              "ABW umfaßt Sollarbeitszeit
       IF 1 = 2. MESSAGE I848(P2). ENDIF.
       CALL FUNCTION 'HR_APPEND_ERROR_LIST'
            EXPORTING
                 ARBGB = 'P2'
                 MSGTY = 'I'
                 MSGNO = 848.
       BEGUZ_EXP = SPACE06.
       ENDUZ_EXP = SPACE06.
       STDAZ_EXP = DAYGEN-SOLLZ.      MESSAGE_OCCURED = 'X'.
    ENDIF.
ENDIF."
I think this should be callend via ESS as well

HR Download Time Data - Employee Remuneration Info

Hi,
We are using the program H00RSM_CLASS_TIMEDATA_DOWNLOAD to publish the Idoc HRSM_C01, in order to transfer time data to a external payroll.
However, we can see that it contains a segment called E1HRSM_TIM_2010 that is never populated.
Do you guys know if the report above mentioned have a standard function to populate the segment we want?
Thanks in advance.
Luí

Hi,
There is no such function to populate the segment
E1HRSM_TIM_2010 . In fact there are only two segments
in our system. E1HRSM_TIM_VAL and E1HRSM_TIM_ZL.
Might be you have enhanced the object.
Regards,
GSR.

Missing time, so unable to log into system with out changing time.

My issue is missing time. I have a lab with about 20 mac minis on the network for students to log in.
Some days the date and time are off by 6 hours so this prevents users form being able to log in.
We can log in as admin and change the time and date we can log in again.
Has anyone else had this issue where the time is behind about 6 hours?
I dont think it is a battery issue since the day is only behind and reverted back to orginal born on date.
Any assistance would be appricated.
Thanks,

Thanks for the info I will try chaning out the battery on a system and see if that works. Chaning out battery on these things is time comsuming and not an easy thing to do.
I just never seen this type of behavior before on any computer. I seen when batteries die and that will cause issues but not like this.
I will get back to you to award points if this does resolve the issue.
Thanks again for the info a brody.

Cannot find Battery Info in System Profiler

Cannot find "Battery Info" in System Profiler (4.0.4).
Originally, I was going to title this post "battery not charging" - which is why I am looking for battery details. Of course, as soon as I started typing the battery clicked up a notch (29% to 30%).
So, I got a confused battery and a confused System Profiler.
A couple of weeks ago I had drained the battery completely and had to even run off the backup battery as I quickly finished what I was doing. I had since fully charged the battery and thought there were no problems.
Then suddenly a couple of days ago, I looked up and it was stuck at 33%. When I tried to switch from "Percentage" to "Time", all I got was a "Calculating...", which it never actually did. I tried unplugging the computer, and it indeed did run off battery power, so it was at least communicating power-wise, if not information-wise. Two days of fiddling around offered no solutions. (Zapped the PRAM, reset PMU). Meanwhile the battery kept on not charging.
Then, I start typing here and suddenly the battery is communicating with the computer. Percentage is ticking up and there is even an estimated "time until full". However, System Profiler still does not see any battery, or in fact even give me anything to click on for power management. It's not under Hardware, Software, Network or Logs. "Extended Report" doesn't find it either. I'm hoping I am just missing it somehow... is "Battery Information" hidden somewhere?
The battery plug has now switched from green to orange and the indicator icon from a battery with a plug, to a battery with a lightning bolt. While I was trying to figure out the problem, I have taken out the battery several times, so I doubt it would be a simple connection issue.
While I would like to believe my computer has magically healed itself, I suspect that something is still amiss. Maybe earlier versions of System Profiler did not have Battery Info?

Hi, RW, and welcome to Apple Discussions. System Profiler prior to the version that came with Tiger doesn't report any battery info. If you're running Panther, that's why you can't find anything about your battery in SP. Jeremy Kezer's XBattery will provide info about your battery in Panther.
Test to see whether your battery charges with a different, known-good AC adapter. That's the cheapest component of the charging system to replace if yours is faulty, and with luck that will prove to be where the problem lies. Other possibilities are a bad battery, DC-In board, or logic board.

Time/date resetting after shutting down.

I have a 12" 867MHz PowerBook G4 that seems to give me the Time/Date reset error message. The display gives me a December 31st, 1969 date and after a few minutes, it reverts back to the proper time. Any ideas?

Normally, this would be an issue with the internal PRAM backup battery, but 12-inch PowerBooks don't have one.
Have you tried to reset your PMU? This article describes how to do it: http://docs.info.apple.com/article.html?artnum=14449.
If that doesn't help, others in this forum have linked your issue to a dying battery. Have you noticed any decline in your battery life?

MISSING: Time, Date, Battery Info

Similar Messages

Maybe you are looking for