Missing toolbar in WebDynpro for ABAP Layout Editor

Hello all .
when creating a view on the layout screen, I have the toolbar missing (the one with the favorites, Active components, Adobe and so on... ).
Did anyone experience that problem? How can I make this toolbar shown?
Thanks,
Helena.

Hello Thomas,
thanks for this info. So with the EHP the WYSWIG UI Element will be part of the standard UIs?
Which EHP do you mean because we're doing currently an RampUp with SAP EHP3 for ERP 6.0?
So you mean Basis Netweaver EHP? don't you?
Edited by: Steffen Epple on May 21, 2008 8:16 AM

Similar Messages

N4S: Web Dynpro for ABAP layout editor not working

Have problem in Layout editor in Web Dynpro for ABAP
I have installed NW04S Testdrive on 64bit Linux and able to login.
SE80 is working alright.
Next I create a Web Dynpro Comp. / Intf. and create a component.
I double click on the View name "V_Default" . The Layout editor opens on the right side. Change into Edit Mode.
The "View Elements" panel on the left side of layout editor is missing. This is where we select the various elements like "Textview" etc.
Even the right click on the "ROOTUIELEMENTCONTAINER" to insert elements using context menu does not work.
In summary I am not able to add any element in WD4A Layout screen.
Is there any special plugin required to be installed?
How to solve this problem?

you cannot develope Webdynpro for ABAP using ECC5
This is available with netweaver 2004s (WAS7.0) for which ramp up is going on right now and the general availability is expected sometime around 1st quarter for 2006.
Regards
Raja

Not able to integrate Payment Gateway with WebDynpro for ABAP

Hi,
   I am not able to integrate the Payment Gateway for Billdesk ( third party software) with Webdynpro for ABAP.
Summery of the Issue : -
(*) Data from PORTAL Application to PAYMENT GATEWAY is going Correctly but
(*) Data from PAYMENT GATEWAY to PORTAL Application is not going correctly.
Details about the Problem : -
   I have created 3 View in Webdynpro Application for ABAP.
View 1 -> Sales Order
View 2 -> Confirm Order
View 3 -> Success Message
When I am on the View 2 i,e Confirm Order, I have a UI Element ( LINK TO URL) on this View. When I click on the Link it successful takes me to the Bill desk site(Payment Gateway Integrator).After selecting the Card Type - > Master card, or Visa or Amex, I am routed to the Gateway Site of the Citibank, Where I have to enter the CARD details like Card Number, CVV Number, Expiry Date, and press the Submit Button.
Which now takes me to the final confirmation site, stating
1) Order Number
2) Bank ID
3) Merchant ID
4) Amount
5) Authorize ( APPROVED / NOT APPROVED)
Now once i click on the Submit button, It transfers the amount of the Customer to my bank account, correctly and goes back to the my portal application.
Till here it is working correctly, but 1 parameter is missing which is called "msg", and this parameter contains important information regarding the payment. This parameter is sent back form the Gateway Site to my Portal.
1) Authorize STATUS
2) Check Sum
etc... which will be finally required to decided whether I should go on to create the Sales Order for the Customer or not.
If the Authorize Status = '0300' then only create the Sales Order other wise if the status is any thing else lets say not equal to '0300' then gives the message that the Credit Card is not authorize to process the Sales Order.
Regards,
Saurabh Bhatnagar
E : [email protected]

Dear Sir,
we are implementing Retail POS (Point of sale) for one retail company. We need to integrate third party payment gateway.
it's name is PLUTAS. We have got developer kit from Plutas (For trial ) . we have installed that kit in our system.
In my program, I am triggering " PL_TriggerTransaction" using call method. After triggering method it executes method, control passes to third party software. But I am not able to catch return parameter (Responce).
So that would be great if you help me out with this issue.
I wrote following code.
REPORT ZTEST678.
INCLUDE OLE2INCL.
data : rc_plutus type ole2_object,
lpszTransData type string,
lTxnType type char4,
lpszTransData1 TYPE string,
ret_string TYPE string,
l_count TYPE i,
l_time TYPE sy-uzeit.
rc_gui type ref to CL_GUI_CONTROL.
lTxnType = '4001'.                        "----
transaction type
lpszTransData = '1234567'.          " -
trasaction data
*create object rc_gui.
create object rc_plutus 'PLUTUSEXCHANGE.EXCHANGEOBJ'(001) no flush. "no flush ."queueonly.
call method of rc_plutus 'PL_TriggerTransaction'(002) = lpszTransData1
exporting
#1 = lTxnType
#2 = lpszTransData.
wait up to 20 seconds.
write: ret_string.                        " <----
Value is not coming
write: lpszTransData1.            " <----
Value is not coming

Issue regarding cell action in webdynpro for abap alv

hello gurus,
       i have one requirement in webdynpro for abap alv.i have one alv table in that i have one coloun employee name.
for that i have provided F4 help and that is editable field.if i select value from F4 help it is getting value correctly and it is showing properly at the same time it is allowing values entered manually insted of from F4 help.but as per my requiremnet it should not allow any manually entered values.how can i get this functinality. i am not aware indepth od WDA.
could you go through my isssue and could you revert me some solution.
thanks in advance.

Hi,
   I dont think this is possible because when you can change the value using F4 then it would obviously be
   possible to enter manually.
   You can try using a drop down instead because in drop down you cannot enter values manually,
   But this would be good if the values that can be shown in drop down are very low, if the values are more
   then again user will face problems selecting values.
   Else you can try out what srinivas suggested, But dont know whether we can have two cell editors at a time
   inside a single cell of ALV. Please post the answer if you have found any other way to do it.

Uploading PDF into webdynpro for ABAP

Hello,
I have a small Webdynpro for ABAP with an Interactive Form. I can fill my fields in this form. Now I downloaded the PDF to my local drive, changed the fields and tried to upload it again. Thats where my problem is:
I cant upload my changes. I used a File_upload UI Element which is binded to a attribute FORM.FILE type xstring. This attribut I binded to the Interactive_Form element field pdfsources. I implemented a button with an action for my server roundtrip.
I thought thats it but unfortunetly not. Can anybody tell me what I am missing.
Thanks in advance.
regards
stefan

Hi Stefan
Web Dynpro ABAP development recommends that you create a <a href="http://service.sap.com/message">customer message</a> on component BC-WD-ABA.
Best regards,
Markus Meisl

Webdynpro for ABAP - Textdirection top - bottom ???

Hi all,
is there any ui-element which enables textdirection top -> bottom or supprts HTML tags to realize this simple requirement ????
Thx !!!

I understand this, but if you implement right->Left and Left->Right you should also think about top->bottom & bottom->top, also there is a FormatedTexView with some HTML support but this has no style and can't be embedded as a Celleditor into the ALV... And also the fixed colors for ALV Cells i don't understand why there should be a limitation of colors for cells in CL_WD_TABLE_COLUMN=>E_CELL_DESIGN
I really like and enjoy the WebDynpro for ABAP concept but sometimes i feel really sad for such limits like i mentioned because that is basic layout stuff.....

SAP standard example to get start with Webdynpro for ABAP

Hi,
I just started learning Webdynpro for ABAP.
I'm looking for SAP standard buit in applilcation example which explains all the the view controls, properties and Layout desining.
please let me know the standard applications of SAP for learning.
Many Thanks,
Gupta

hi..
just go to package SWDP_DEMO, it has all sample webdynpro applications using all UI elements.
By the way...question is posted in wrong forum
Regards
Manas Dua

Diff between BSP and WEBDYNPRO FOR ABAP?

Hi All,
can anyone let me know the Difference between BSP's and WEBDYNPRO FOR ABAP.
Regards,
Ravi

Hi Ravi,
In truth, Web Dynpro contains many of the enhancements than BSPs....like built-in value-help and select options...... they
will become standard in Web Dynpro. But these can also be added to BSPs also.
There are several architectural differences between BSP and WDA. WDA has some advanced features but more restrictive framework compared to BSP.
WDA is stateful only. While BSP supports both stateful and stateless programming models.
WDA doesn't aloow us to use our own custom HTML, JavaScript or other controls. To provide compatibility the rendering logic is completely hidden from the developer.
On the other hand, BSP has no such restrictions and allows an extreme level of custom rendering. This makes BSP a perfect platform for applications that require pixel-perfect layout or specialized UI elements.

Webdynpro for ABAP call non-SAP webservice

Hi,
We have a WAS 7.0 ABAP only, Can we use webdynpro for ABAP to call a Notes's webservice or Weblogic's webservice.
Where can I get the document link?
Edited by: Jeff Lien on Jan 8, 2008 10:47 AM
Edited by: Jeff Lien on Jan 8, 2008 10:49 AM

Hi this will help u.
Web Dynpro ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706
Hope that the following also helps you.
Web Dynpro for ABAP (WD4A, WDA) is the SAP standard UI technology for developing Web
applications in the ABAP environment. It consists of a runtime environment and a graphical
development environment with special Web Dynpro tools that are integrated in the ABAP
Workbench (SE80).
Web Dynpro offers the following advantages for application developers:
The use of declarative and graphical tools significantly reduces the implementation
effort
Web Dynpro supports a structured design process
Strict separation between layout and business data
Reuse and better maintainability by using components
The layout and navigation is easily changed using the Web Dynpro tools
Stateful applications are supported that is, if the page is changed and the required
data remains intact so that you can access it at any time throughout the entire
application context.
Note that stateless applications are not possible.
Automatic data transport using data binding
Automatic input check
Automatic operation of the Web Dynpro application using the keyboard
User interface accessibility is supported
Full integration in the reliable ABAP development environment
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
Clear separation of business logic and display logic
Uniform metamodel for all types of user interfaces
Execution on a number of client platforms.
Extensive platform independence of interfaces
Structure
Metamodel Concept
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
Graphical Development Tools
To support this declarative concept, both the SAP NetWeaver Developer Studio and the
ABAP Workbench contain a range of Web Dynpro tools. You can therefore generate a large
proportion of a Web Dynpro application using the tools provided, without having to create your
own source code. This applies to the following parts of the application:
Data flow between the front end and back end
Layout of the user interface
Properties of user interface elements
The Web Dynpro tools enable you to create source text areas manually within generated
source texts. These areas are not changed if the source code is regenerated.
Separation of Business and Application Logic
Using Web Dynpro enables a clear separation of business logic and display logic. A Web
Dynpro application runs on the front end and has local or remote access to the back end
system via a service. This means that the display logic is contained in the Web Dynpro
application, while the business logic and the persistence of the business objects run in the
back end system. The following options are currently available for connecting Web Dynpro
applications and the back-end system:
An interface generated using adaptive RFC, through which BAPIs of an SAP system
can be called
An interface for calling Web services
A self-generated interface
The source code required for connecting the Web Dynpro application can be generated
from a UML definition of the Web Dynpro interface. A UML definition can be imported
into the Web Dynpro tools as an XML file.
Conversion of the Model-View-Controller
Conversion of the Model-View-Controller Programming Model
Every Web Dynpro application is structured according to the Model View Controller
programming model:
The model forms the interface to the back end system and thus enables the
Web Dynpro application access to data.
The view is responsible for the representation of the data in the browser.
The controller lies between the view and the model. The controller formats
the model data to be displayed in the view, processes the user entries made by the
user, and returns them to the model.
/people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
with regards,
Hema.
pls give points if helpful.

What is used for WebDynpro for ABAP?

hi all friends,,
what is used for WebDynpro for ABAP?
Thanks,
S.Suresh.
Title was edited by:
        Alvaro Tejada Galindo

Hi
Web Dynpro for ABAP - Getting Started
Web Dynpro for ABAP is SAPs new standard UI technology for developing user interfaces in the ABAP environment. In the long term Web Dynpro for ABAP will be the successor of the traditional screen (Dynpro) based user interface technology which is based on the SAP GUI. Available with NetWeaver 7.0 (2004s) Web Dynpro for ABAP provides the same declarative UI development paradigm as Web Dynpro for Java directly out of the NetWeaver ABAP Application Server. Web Dynpro for ABAP allows the development of user interfaces directly within the ABAP Workbench (SE80) and the Web Dynpro runtime environment is a central part of the ABAP server and can be used in any SAP solution based on NetWeaver 7.0 (2004s) without the need of an additional server installation.
Web Dynpro for ABAP allows the development of user interfaces in a declarative way by providing a mighty framework which abstracts the rendering technology from the core UI definition tasks. The Web Dynpro developer declares the layout and behavior of the UI without caring about HTML, JavaScript, browser specifics or the HTTP protocol. Instead the focus lies on designing graphically Web Dynpro components based on the Model View Controller model, which enforces a clear separation between the UI layer and the underlying business logic.
This declarative Web Dynpro programming model enforces the developer to focus on the tasks of
Designing the layout of the visible views (where should the table be placed, do I need tabs, how should the button look?)
Declaring the flow and behavior of the application (flow between views, which event is triggered by which button click, etc)
Defining the data binding (which internal table is displayed in a specific table, etc)
Implementing the event handlers and controller methods.
Without making any assumption about the used rendering technology, like which browser should be supported or if the Web Dynpro application will be later displayed in a web browser via HTML at all or in another kind of client with completely different rendering capabilities.
The Web Dynpro Frameworks provides all important UI features directly out of the box:
All elements (tables, buttons, trees, dropdown list boxes, etc) necessary for state of the art user interfaces are provided by the Web Dynpro Framework in the form of predefined UI element libraries.
Complex features and behavior of UI elements.
Internationalization of the UI. All visible strings in a Web Dynpro ABAP UI are handled by the translation system and are translated in the same translation environment like other ABAP language dependent resources. All texts are displayed automatically at runtime, dependent of the users credentials.
Accessibility features are directly built into the framework and UI elements.
A unified rendering engine generates at runtime the data which is sent to the specific client application, which is not limited to browsers but includes the NetWeaver Business Client.
All this is available in the established environment of the ABAP application server and well known capabilities like the transportation and change management system, security environment, test and performance analysis tools or remote debugging can be used like in common ABAP development.
Learn about the Web Dynpro for ABAP technology with the resources below, and post your related questions and answers to the Web Dynpro forum.
Web Dynpro for ABAP: Sneak Preview
Download, License Key Documentation, and Installation Guide available here.
Web Dynpro for ABAP: Tutorials for Beginners
SAP NetWeaver Product Management provides this set of tutorials for getting started with Web Dynpro for ABAP technology.
SAP Help Portal: Web Dynpro for ABAP
This online SAP documentation goes into detail about Web Dynpro architecture and programming, Web Dynpro for ABAP administration and security, and more.
Web Dynpro - Not Just for Java Developers Anymore   (PDF 3.8 MB)
In this SAP Insider article, SAP Product Manager Karl Kessler describes the tools of Web Dynpro for ABAP and uses a simple flight report example to highlight new and updated tools in the familiar ABAP environment.
Community Contribution: WDA Tutorial I - Getting Started with Web Dynpro for ABAP   (PDF 2.5 MB)
Software Engineer Rich Heilman provides this step-by-step guide for developing a Web Dynpro for ABAP application.
Going into Details
Basic Concepts - Selection vs. LeadSelection
In this blog, Thomas Szuecs of the Web Dynpro for ABAP development team shows how selection and LeadSelection works in Web Dynpro for ABAP.
Web Dynpro for ABAP: Recreate the SE16 Data Browser   (PDF 386 KB)
In this tutorial, Thomas Jung of SAP NetWeaver Product Management shows how to create a data browser simulator using Web Dynpro for ABAP.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/80aef577-543f-2a10-d19c-d83a565efe37 [original link is broken]
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Offline Interactive PDF Forms Using EMail with WebDynpro for ABAP

These is a tutorial on implementing Offline Interactive PDF Forms using Email to both send out and receive the form back using WebDynpro for Java.
Is it possible to implement the same using WebDynpro for ABAP, specifically receiving the forms via email server.
Regards,
Mark

Hi Mark,
Check this out :
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
Go to section :
Send, Receive, and Process Interactive Forms via Email in SAP NetWeaver Application Server ABAP (RIG session 4A)
and for the ABAP WebDynpro :
SAP Interactive Forms by Adobe in Web Dynpro for ABAP (Session 3A) .
I managed to make it work in my internal sytem.
Goodluck.
Cheers,
Danny

How to create an editable table in webdynpro for ABAP? Help!

Hi Experts,
I have a requirement where I have to create a webdynpro for ABAP table for new row/rows entry, delete row/rows and update row/rows data. This is something like table control in normal ABAP.
how can I achieve this? Is there any such feature in ALV component?
Any code sample will be really helpfull.
Please help!
Thanks
Gopal

Hi,
yes, the ALV is integrated into WDA, have a look at this: http://help.sap.com/saphelp_nw2004s/helpdata/en/74/fd4142646ab46be10000000a155106/frameset.htm
Regards, Heidi
PS: look at the WDA Knowledge Center under https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943, there you can find several ALV tutorials
Message was edited by: Heidi von Geisau

Excel File Upload In Webdynpro For ABAP

Hi All,
I have a doubt regarding EXCEL file upload for Webdynpro for ABAP.
I am able to get the path of file using 'FILEUPLOAD' UI element.Now I need to upload the EXCEL file into ALV.I have tried out with GUI_UPLOAD and other excel upload function module.But these Function Module throws Dump.
Can you please suggest how to go about it.It will be a great help if u can suggest any function module or method.

Hi Amita,
Insetad of using GUI_UPLOAD use 'HR_KR_XSTRING_TO_STRING'
Here is the sample code,
TYPES :BEGIN OF str_itab,
              name(10) TYPE c,
              age(10) TYPE c,
             END OF str_itab.
DATA : t_table1 TYPE STANDARD TABLE OF str_itab,
       i_data TYPE STANDARD TABLE OF string,
               lo_nd_sflight TYPE REF TO if_wd_context_node,
                lo_el_sflight TYPE REF TO if_wd_context_element,
                l_string TYPE string,
        fs_table TYPE str_itab,
                l_xstring TYPE xstring,
fields TYPE string_table,
lv_field TYPE string.
DATA : t_table TYPE if_main=>elements_data_tab,
data_table TYPE if_main=>elements_data_tab.
* get single attribute
wd_context->get_attribute(EXPORTING name = `DATASOURCE`
                          IMPORTING value = l_xstring ).
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
EXPORTING
in_xstring = l_xstring
IMPORTING
out_string = l_string.
SPLIT l_string AT
cl_abap_char_utilities=>newline INTO TABLE i_data.
* Bind With table Element.
LOOP AT i_data INTO l_string.
SPLIT l_string AT cl_abap_char_utilities=>horizontal_tab INTO TABLE
fields.
READ TABLE fields INTO lv_field INDEX 1.
fs_table-name = lv_field.
READ TABLE fields INTO lv_field INDEX 2.
fs_table-age = lv_field.
APPEND fs_table TO t_table1.
ENDLOOP.
lo_nd_sflight = wd_context->get_child_node( 'DATA_TAB' ).
lo_nd_sflight->bind_table( t_table1 ).
ENDMETHOD.
if correct give correct answer
Thanks & Regards,
Meenachi.R

Missing toolbar in WebDynpro for ABAP Layout Editor

Similar Messages

Maybe you are looking for