Missing Toshiba recovery partition

I recovered my laptop using the "0" method and I changed the C partition size and I didnt know it was going to delete my other partitions.
Now I want to get back my D partition. Is that possible?

>Now I want to get back my D partition. Is that possible?
No, the partition has been modified and this affected also the HDD Recovery procedure.
In case you did not create the Recovery disk in the past, you will not be able to recover the notebook.
But its possible to order the recovery media
Where you come from? Where did you purchase the notebook?

Similar Messages

  • Missing my recovery partition

    dear HP 
      I having a problem with my machine when I wanted to doing recovery for it , I  Surprised that is no recovery partition available there .  
    This question was solved.
    View Solution.

    This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
    When you first setup your computer, you should have created your personal HP Recovery Media. If you didn't create this media and the HP Recovery partition has been damaged or removed, you will need to contact HP Customer Support in your region or country, via the HP Worldwide Support Portal, to check on the availability of HP Recovery Media for your computer.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Missing Toshiba recovery vizard

    Hello!
    I have one problem. My laptop was at repair service and as a result they restored only Windows but the rest is removed. Even office license and now I want to set computer to factory settings. There is no toshiba recovery vizard.
    I understand you can order the disc on the official site. Please explain it to me. Please send it by mail or give a download link from your website?
    Many thanks!
    +Message was edited: posting has been translated+

    Recovery image cannot be downloaded and if you need original recovery disc you must order it.
    You can do this under https://backupmedia.toshiba.eu/landing.aspx
    Please check this page.

  • Lenovo u400 missing one recovery partition

    I had to change my ssd, and my okr partition is gone, is there a way to recover it?, i can't get the m-gpu drivers to work, Lenovo Ideapad U400 Windows 7 HomePremium 64 bit SP1

    KlyLoh,
    Since you did purchase this Lenovo computer in the US, do you have a friend or a family member that is in the US it would be possible for them to purchase it for you. The rcd will be delivered on the US shipping address via UPS, shippment will take within 5 business days. You can now tell your friend or family member to ship it to you in Argentina.
    Have your friend or family member in the US call Lenovo Premium Support - 18552713878 option 2.
    Once you have the RCD send me an email and will provide the steps in doing the OKR.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • 2007 2.6GHz 17 Inch Macbook Pro (MacBookPro3,1) Missing Recovery Partition?

    My MacBook Pro 2007 2.6GHz 17 Inch is missing a recovery partition. I was told it is supposed to be added automatically when you reinstall/update your mac os x. I recently did a fresh install of Mavericks. It was missing. I did another fresh install, still missing. Then I restored data and did a non-fresh install. Still Missing. I kinda want to be able to track the computer. It has the original hard drive, and all the other components are original as well, except for the battery, which exploded, apple replaced it under warranty a while ago, and the RAM. I upgraded the RAM today, but it didn't work before either. It is genuine OWC RAM. (The same kind apple uses) Do I need to manually create one? Should I downgrade the OS and then upgrade to Mavericks again? Is it a problem that apple is going to fix?
    I did make the mistake of erasing the entire hard drive rather than just the main partition. However, according to apple, this should not have made a difference, as if it is missing it is supposed to be created with the installation.
    15 Inch, 2.6GHz, 2007 MacBook Pro (MacBookPro3,1) Running OS X 10.9.1 (Mavericks)

    There are two versions of recovery: the regular which will download the currently installed system and internet recovery which will allow you to wipe a drive and reinstall the originally installed system (as long as that was Lion or later). Both of them require that the recovery partition be installed - that is what allows you to boot from it (with key commands) and that you have an internet connection.
    Note the link towards the bottom to Internet Recovery which will result in this page (about Recovery):
    http://support.apple.com/kb/HT4718

  • How do I restore a missing recovery partition in Mountain Lion so I can activate Find My Mac?

    I am missing my Recovery Partition on my MacBook Pro (Retina), so I cannot activate Find My Mac.  How can I restore the missing recovery partition?

    Gin Tonyx wrote:
    Kessler, thx for your insight. That helped me.
    [personal]
    Csound: I read the terms. Section 3 of the submissions rules says "Post constructive […] questions. Unless otherwise noted, your Submission should […] be a technical support question […]."
    I don't see where I went wrong. Maybe you could get off my back, please. Willya?
    [/personal]
    You should have kept reading until item 5
    5. Test your answer. When possible, make sure your Submission works on your own computer before you post it.

  • Help, my computer refuses to boot the recovery partition.

    My computer refuses to boot the recovery partition. I hit f12 during startup and selected "HDD recovery", however instead of loading what is suppsoed to be the toshiba recovery wizard, the text "HDD recovery" quickly flashes on the bottom of the screen and then it simply loads windows 7 normally.
    I can access the hidden recovery partition from windows 7 and I can see the .wim file in there, but I don't know how to restore a computer using a system image. I've tried that option and it tells me it is unable to find system images, is there a specific place I have to put this file? Do I have to burn it to dvd?
    I ran linux off the optical disk drive to see if it would boot anything other than windows 7 and surely enough linux worked.
    I've also tried copying the contents of a system repair disk onto a usb and replacing the boot.wim with the .wim on the toshiba recovery partition and renaming it to boot.wim, which let me into the toshiba recovery wizard, but I was unable to continue past the first menu.
    It says on the bottom of my laptop the specific model is a Toshiba Sattelite P750 -04S, if I've read it correctly.
    Edit: Is there anyway to "start fresh" without using the recovery partititon or buying a new copy of windows? What I am trying to do is to revert to factory "out of the box" settings.

    Satellite P750-04S (PSAY3C-04S010)
    We support US computer at this website. Everything for your Canadian model is here.
    You can order recovery discs by calling 800-663-0378. The discs are free, but the shipping and handling charges are probably substantial.
    For instructions, see the section Restoring the pre-installed software from your created Recovery Media, which begins on p. 1-16 of the User's Manual (attached).
    -Jerry
    Attachments:
    P750-P750D-P755-P755D_EnglishManual.pdf ‏4796 KB

  • How i do restoring recovery partition on ThinkPad x201

    Where can I find the missing files recovery partition? The previous owner of the laptop corrupled one file for recovery partition in the folder "factoryrecovery", effectively removing it.
    contents of the folder "factoryrecovery":
    Name:                                       Size:
    bcdinfo.txt                                4 015
    cdrivebackup.swm          63 299 584  <- this file maybe corrupted....
    cdrivebackup2.swm   2 147 460 280
    cdrivebackup3.swm   1 102 545 040
    RECOVERY.INI                          955
    sdrivebackup.wim         266 014 847
    service_done.ini                            19
    Machine: Lenovo ThinkPad x201 Type: 3626-W6E S/N: R9-35L6X 10/04

    If you do a factory restore using HP recovery discs it will put everything back including recovery partition. I don't know if any way to manually re-create the recovery partition.
    NOTE: back up your files as Factory Restore wipes ALL data.

  • Windows Vista recovery partition lost - will toshiba send me discs?

    Hi, something happened to my hard drive and the vista recovery partition was erased, so i cannot recover vista. I just bought this laptop 2 months ago and i paid for the OS with it, i have the code of authentication and serial number on the bottom of my laptop, will toshiba send me install discs? i also have the emails from best buy from when i purchased the laptop online.
    thanks

    sijyb00 wrote:
    See, the the thing is, I DID make the recovery cd... but it isn't working. From my understanding, the cd uses the information from the recovery partition to restore Windows? Correct me if I'm wrong.  Every time I boot up the cd it detects no OS and when I click continue, it begins the installation and immediately says Installation cancelled, missing files, something like C:\win.int is missing.
    So the recovery cd is not working. I called Toshiba and from what I could understand from the horrible english, was that they would charge me for another recovery cd... which I don't need, because I have one. Or send in my laptop for "repair." They said it was my hard drive. Which is complete bull**bleep**, when windows failed I ran a linux os on it perfectly fine, so it is not my hard drive.
    Anyone have any ideas on how I can fix this? I have a product key for vista which I PAID for when I bought the laptop... I don't think it's fair to have to buy it over again for $100-200
    No, the recovery disks don't rely on anything on the hard drive.  From what you say, either you are not booting from the optical drive, or the disks indeed are faulty.
    The last I knew, replacement disks were $25.  See the sticky at the top of the General Discussion topic for details.
    There have been a lot of reports of problems with recovery disks, so I'm a bit surprised that Toshiba won't ship you replacements at no charge.  Might be worth another try, and an attempt to get to the next tech level.

  • Recovery partition missing after Time Machine restore of Lion

    I recently purchased a new hard drive for my macbook pro and restored my system to the new disc via a Time Machine backup of the old disc. Everything worked fine and my mac is running faster than ever thanks to the new drive
    I just recently realized, however, that by using this method of restoration, the Lion recovery partition that was created during my first install is gone. This is probably due to it being a hidden partition that disc utility on my install disc was unable to recreate.
    I verified that the partition is missing by downloading the new recovery tool that Apple released a few days ago. It failed to work because the partiton could not be found.
    My question is if anyone else has realized this issue and if there is a solution. Is it possible to recreate the partition without going through an archive-and-reinstall routine? In my opinion this is a bit of a blunder by Apple as it renders Time Machine usless.
    Thoughts? Suggestions?

    Read the instructions for using the Recovery HD installation tool. You must make a small partition on the new hard drive of about 1 GB or so on which to install the Recovery HD.
    To resize the drive do the following:
    1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
    2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.

  • Recovery partition is missing boot file!

    My operating system was missing and my hard drive was formatted I tried using the windows installation disc but it didn't help. Then I installed Windows 8 its seems a little too confusing but I miss my Windows 7 features. Is there any way to boot from the recovery drive without the boot file, Windows 8 can't open the recovery manager  though.
    This question was solved.
    View Solution.

    Sometimes you can mark the Recovery patition as Active and the laptop will boot into it and reinstall.
    1.Open Disk Management>>Instructions
    2.Right-click on the "HP Recovery" partition and select "Mark as Active Partition."
    3.When the warning prompt appears, select "Yes" - Reboot and it will automatically boot into the Recovery Manager.
    If this fails, phone HP to order Recovery Disks for your machine.Choose your country here> Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Recovery Partition Missing and Bluetooth Issues After Update

    After upgrading to 10.9.3 my recovery partition is gone and my bluetooth will pair with a new device, connect, and then disconnect.  After that I am not able to reconnect the new bluetooth device.  I can see it, but can't connect to it.  I have tried multiple bluetooth devices, and they all do the same thing.  I am really baffled about the missing recovery partition.  Any ideas?

    I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images!  Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

  • Recreate missing recovery partition

    After wiping my computer via partitioning from a USB installer, and reinstalling from the USB, I noticed when I tried to boot that there is no recovery partition.  Just OS X and Windows (bootcamp).  Is there a proprietary built in Apple way to recreate the recovery partiton?

    CCC Carbon Copy Cloner has a utility called "Disk Center" that is included with CCC that will create a Recovery Partition for you.  I understand that CCC is not free, but it does have a free 30 day trial. 
    I did use the musings.silvertooth.us utility to create a missing recovery partition successfully, but found (1) it hard to find the right version on that site and (2) I was somewhat uncomfortable running a low-level AppleScript install program style utility built by an unknown source on the internet.  Call my paranoid, but in the future I would prefer to either use CCC to avoid losing my recovery partition like I did with Super Duper (which I've loved for years until this missing recovery partition issue) or use CCC to create missing recovery partitions.
    The "Disk Center" in CCC Carbon Copy Cloner is not obvious and easy to find... it's easy to not know it's there.  But once you find it in the CCC menu system, it is seemingly obvious that it is a turnkey way to create a Recovery HD Partition.
    I just thought I would share, since I burned several hours of pain-staking research and experimentation on this.

  • HD recovery partition missing

    I just find out that the HD recovery partition went missing in my MBP Early 2011 ML 10.8.5. I don't know when it exactly happened, but my guess is that it was after removing a Bootcamp partition. In any case, I have Time Capsule backups since both the Bootcamp and HD Recovery partitions were in my MBP. However, I'm not sure if the right solution is to restore my Mac to such old days. I tried reinstalling ML by using the Internet Recovery feature (pressing command+R after restarting the computer), but it was Lion, not Mountain Lion, the option that I was given. Therefore, it was not possible to complete the process. I have read on the Internet solutions that involved using scripts written by other users, but I'm not a computer savvy so I don't feel confident following such instructions. I should also mention that I tried to use OS X Recovery Disk Assistant v1.0, but  it didn 't work precisely because I have no Recovery HD in my MBP. Lastly, I would like to mention that I need the recovery partition in my MBP so I can use the "Find my Mac" feature, which is especially useful for portable devices. Any suggestion? Thanks.

    Try using Carbon Copy Cloner 3.5.2. However, you want to be sure you allow it to update to 3.5.3b2. It may be able to create a Recovery HD partition without requiring one already be installed on your computer.

  • Toshiba WT tablet - Deleted recovery partition

    Hi,
    I had problem with Windows 8.1 so I tried to refresh system, but I couldn't do this and then I tried to get my tablet to factory setting and what suprised me that now my tablet don't have partition and I only see " No bootable device-please restart system".
    So I can imagine that I deleted my windows 8.1 from my tablet :( How can i repair itn how can I instal windows again?
    Please help me!!!

    Hi
    I presume you didnt create recovery media (USB), right?
    From your other posting I presume you have WT8-A model so please download users manuals document from here and check page 50. There you can find detailed instructions how to restore preinstalled software from the recovery partition.
    Please check it and test it one more time and send some feedback.
    In worst case you must order original recovery media from Toshiba.

Maybe you are looking for