Missing transactions in SAP EWM
Hi,
We have recently procured a new system with the follwoing SAP components:
1. SAP ECC 6.0 including Enhancement Package EhP6
2. SAP EWM 7.0 Add-on component including Enhancement Package EhP2
Now, during the configuration we are not being able to run a few transactions.
For example, /n/sapapo/mvm ; /n/sapapo/om17 ; /n/sapapo/vercreate.
Everytime we get a message that says:
Transaction “******” does not exist
Message no. S#343
I also checked for the TCodes in table TSTC, but I could not locate those there .
Someone please suggest some solution to the above mentioned problems .
Regards,
Oritra
I can only find one of the transactions in that installation guide, that is /sapapo/mvn. And this you need in case the report /SAPAPO/VERSION_CREATE_NO_APO comes up with a dialog box. Did that happen?
And all these transactions refer to models. /sapapo/mvn is to create the initial model 000.
If at all, you only need one model, that is 000. Becauses models are not used in EWM, you would only need if if you use the SCM route determination, and only if you build lanes (I think that is the name).
Also in our standalone EWM system the transaction /sapapo/mvn does not exist, still we got a model 000 (I think it is always there), so the question is: what does the report /SAPAPO/VERSION_CREATE_NO_APO say?
Brgds
Juergen
Similar Messages
-
Documents of RF Transaction for SAP EWM system
Hi Team
I need documents and how to devlop the" RF transaction" for the SAP EWM(Extended warehouse management) system.
Thanks in Advacne.
AbhishekCheck this link, it should help you:
http://www.knowscm.net/knowledge/rf-cookbook
Cheers,
Koen. -
Display Warehouse Stock in SAP EWM
Dear Experts,
Kindly let me know what is the transaction code to display Warehouse Stock in SAP EWM.
Thanks,
ShettyHi,
Indeed, the Warehouse monitor pretty much gives you all the information that you need. Do not forget that from time to time you need to update the stock data from the EWM to the ERP using the transaction /n/SCWM/ERP_STOCKCHECK - Stock Comparison ERP in order for the monitor from the EWM to be conclusive with the valuated data form ERP.
All the best,
Claudiu Maxim -
All,
I am trying to set up a simple demo about Payer direct with our 46C system. I have the R3 system defined in the system landscape. In user management, I have assigned UIDPW as logon method. I have maintained the User mapping where it is successfully saved but then when I go for the actual execution of the payer direct package, I get following error:
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'password' missing at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:413) at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:823) at com.sap.mw.jco.JCO$Client.connect(JCO.java:2922) at com.sapportals.portal.prt.service.jco.JCOClientService.getJCOClientPoolEntry(JCOClientService.java:1290) at com.sapportals.portal.prt.service.jco.JCOClientService.getJCOClientPoolEntry(JCOClientService.java:1059) at com.sap.pct.fin.suss.PortalJcoService.getClientFromPortalJCOService(PortalJcoService.java:71) at com.sap.pct.fin.suss.PortalJcoService.getFunctionFromPortalJCOService(PortalJcoService.java:85) at com.sap.pct.fin.suss.R3UserAccountService.getUserAccounts(R3UserAccountService.java:37) at com.sap.pct.fin.suss.PortalBusinessPartnerService.loadBusObjects(PortalBusinessPartnerService.java:150) at com.sap.pct.fin.suss.FrontController.createBillerDirectUser(FrontController.java:244) at com.sap.pct.fin.suss.FrontController.createNewModelManager(FrontController.java:207) at com.sap.pct.fin.suss.FrontController.prepare(FrontController.java:168) at com.sap.pct.fin.suss.FrontController.doContent(FrontController.java:94) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390) at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729) at java.lang.Thread.run(Thread.java:534) .
Exception id: 05:45_29/07/05_0026_3897050
See the details for the exception ID in the log file
Any help will be greatly appreciated.
Regards,
AbhijeetHi Abhijeet,
Can you tell us on what version of EP you are working?
Did u try out other R/3 transaction codes using the same system. you can test in Sys Admin--> support --> SAP Application --> SAP Transaction for EP6 SP2 .Check to see whether you can access and have no error. For EP6 SP9, you can test connection after you create the system.
there are few sAP notes with reference to EP5.0 on RFC_ERROR_PROGRAM - SAP note - 458082, 543870, 516636.
Hope this helps,
Thanks,
Praveen
PS.Dont forget to reward points for useful/solved answers -
Missing transactions in outgoing payments / incoming payments
Hello Experts,
My customer operated the year transfer process and created a new DB. From that point , he faces a problem with the outgoing payments and incoming payment forms.
In the new DB there are missing transactions in the forms mentioned above. We tried to analyze it and we got to the conclusion that the transactions who created by journal entry whose type is JE -30, has transfered to the new DB, but these transactions are not displayed in the outgoing payments and incoming payment forms.
This issue making a big problem with payments because you don't know if any transactions are missing.
Does anybody have an idea hoe to solve it ?Hi,
Since only few countries could use this year transfer process, I am afraid you had better log a message to SAP support. That may give your answer faster.
Thanks,
Gordon -
Missing idocs from SAP to webmethod
Hi Experts,
We have many Interfaces from SAP to AS/400 System Via Webmethods .
There are many Idocs are missing in webmethods Even if the Outbound Idocs is showing As Green with Status 03 in SAP.
So Could You Please give some Suggestion where could be the Problem in SAP or Webmethod System.
Please suggest.
Is there any Transaction in SAP,We can assure that Idoc has been Despatched to Webmethods System?
Thanks in Advance.
Regards,
Parida
Edited by: hara parida on Feb 5, 2009 12:58 AMHi Parida,
IDoc Status 03...Green Status... wills not guarantee you that IDoc reached EDI subsystem...
Run the Program RBDMOIND in SE38...
Changed on :<Date>
IDocs/Commit Work :100
Display IDoc not sent- Check the Check Box.
Now you will get list of un posted IDocs
Ramesh -
Inserting a conversion routine in SLT replication from SAP EWM system to HANA
We are a new SAP HANA customer trying to get the 1st report out… having few issues with data replications from SAP EWM system. EWM material conversion use a Kernel level FM to convert material GUID code to human readable material code, HANA does not use this routine so we are exploring whether we can insert ABAP routine to update the SLT replication or conversion logic, for example we can call EWM: CONVERSION_EXIT_MDLPD_OUTPUT routine and update human readable material code into correct data field in HANA. With this HANA can see the reportable material code directly. We came across few SLT specific FM’s in EWM, but need to find an enhancement spot to insert a code. I really appreciate If any of you SLT experts can let us know what would be the best way to do this.
Hi,
well, some correction notes for SP08 were missing. Mea culpa :-) Unfortunately implementation of the notes did not solve all Problems. Now the field length is correct but the field order and "not null"-Status of the fields is still wrong.
Best regards
Harry -
Std report transactions in SAP MM
Can somebody provide me all Std SAP MM transactions for SAP MM.
Urgent pl.
ThanksHi,
Pl use Tcode SM01 and enter in the blank line MM and press
enter you will get all Tcodes starting with MM. You can use
OLM and press enter you will go to img. You can use this
transaction only if you have authorization.
Hope this helps you.
Regards,
S.V.ManiKumaar -
How to find out if a Product is HU or non HU managed in SAP EWM ?
Hi All,
Sorry for a naive question. But i tried to google this thing but couldn't find much material on SAP EWM.
How do i know if a Product is HU managed or non HU managed in SAP EWM ?you can control per storage type whether an HU is allowed or not.
so you do not assign the HU but a setting if HUs are allowed or not.
You can create a new HU in various processes e.g. picking or packing. It's not possible to list all possibilities here.
What process are you trying to execute? -
Hide command window from transactions in sap portal
Dear experts
sir i want to hide command window from transactions iview in sap portal when i using sap gui for windows sir i know very well settings for sap gui for html. so is there any possiblity for hiding command window from transactions iview when i use sap gui for windows
please help...............
Edited by: mousam jaini on Nov 1, 2010 12:11 PMHi Mousam
You can get solution from the SAP Note: 1010519
If ur system doesnot meet the pre-requiste, then you can set the below parameter under transaction sicf:
~webgui_simple_toolbar=1
Pls go through the below article to display the SAP Transaction as SAP GUI
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e046cb5c-711a-2a10-95a9-81b365901b95
Thanks
Keshari -
Problem with Sproxy transaction in SAP ECC 6.0
Hi,
I executed SPROXY transaction in SAP ECC 6.0 system, some objects of XI/PI repository are listed, some are not listed.
Why?
How can i achieve to be listed all XI/PI objects?
Thanks.Objects are listed belonging to the Software component ECC 6.0 only as you are viewing from ECC server ( makes sense?)
This link exist in SLD where Product and software components are listed.
Now if you have created a third party software component ABC and wants the objects from here also to be listed in ECC then you can go to ECC in SLD and make the Software component ECC 6.0 dependent on ABC.
regards -
Transaction iView - SAP GUI for HTML-blank on some systems
Hi,
I have few transaction iviews - SAP GUI for HTML running perfectly well on few systems. But the same iViews fail to load in few other systems. A blank iview is displayed. What could the problem be?
Thanks and Regards,
ReenaHi Reena,
Have a look at the product availability matrix:
https://websmp108.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200615320900001250&00200682500000003818=WBRPFM&00200682500000003853=Enterprise%20Portal
IE 7.0 may have some problems if using it with ITS. Ensure that IE are all on the same version (6.0 for example) and the same service pack. We have everyone using IE 6.0.2800.1106 and it works fine now.
Regards,
Nick. -
Transaction Iview - SAP GUI for HTML
Hi,
In SAP transaction iviews - SAP GUI for HTML in portal there is a possibility to go to menu,other transactions from the transaction field.Is there any way to remove the Menu button and hide the transaction field from transaction iview.
Please suggest.
Thanks,
RajaniHi Rajani,
Transaction iview which will control the menu,cancel buttons in SAP GUI for HTML
the url provided by Damian contain the solution for your requirement.
If you are looking somthing different then pls explain the requirement
Just let us know which specifiy buttons you want to show in transcation IVEW.
Thanks,
Anil -
Dear Experts,
I am new to SAP EWM.
In EWM (SAP SCM 5.1), how can we create some stocks for some of the products?
There is no integration with SAP ERP.
Regards,
ShettyHi,
You can use the TA /SCWM/ISU (Initial Stock Data Transfer)
Regards, Zoltá -
Placing the transaction in SAP Menu
hi all,
i have created a ztable and maintaining a transaction for that. T-code is zm93f.
this transaction i have to place in the SAP Menu
logistics -> Material Management->Purchasing->Purchase Order-->Messages
Please let me know the procedure to follow .Please help me out from this.....
Thanks in Advance....Hi,
have a look at the below threads.
Re: sap menu folder
Add transactions in SAP Menu
Adding Report to SAP Menu
Regards,
nagaraj
Maybe you are looking for
-
I have two iPods under same account information and lost one but when I go to track it only the one that isnt lost shows up, is there somewhere I can go to fix this?
-
How can I paste an image into a text/title box?
Hi, I am putting together a 'memories' video using the 'Photo Album' theme in iMovie 11. What I want to do is insert some titles along the way (photo album type), have text above (no problem) with a still image in the box below. However, when I try t
-
Oracle 01g and forms 6i with BLOB Data type
Dear All, I have upgraded my database from oracle 9i R2 to oracle 10g R2. i have an application developed using oracle forms and reports 6i. this application have a form where it stores and retirive an image from the database, this image is stored in
-
Differences between Hyperion 9.3.1 and 11
Hi All, Can any one let me know the full differences between Hyperion 9.3.1 and 11 version. Kindly let me know immedietly ...... Thanks in advance, Ramachandran J
-
PSA showing Request not updated to any data target using delta
Hi BWers, I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen