Missing Transfer Rules in Selection Window for Transport

Hello,
Can somebody tell me why certain transfer rules are missing in the object selection list of the transport connection window? I am using BW 3.5.
Problem details:
I want to transport a transfer rule from a DEV box to a QA box. In the transport connection window, I clicked on "select objects" from under transfer rules in the middle panel. The object listing that followed showed only objects that start with numbers; no object we defined locally that starts with Z was included.
I also noticed that this appears to be a "funny" problem. One other computer connected to BW shows the correct listing while still another shows a different listing. Has this got to do with any setting?
Please help.
Wernel

Hi Wernel,
Its better to activate ur transfer rules once again. Also this Z* TRs would be displayed in last row of the Pop up window in the select Objects list.
or select them by grouping as before dataflow by selecting InfoSoruce.
Assign points if it helps...
Regards,
ARK

Similar Messages

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

Selection variant for transportation planning.

Dear All,
Can you please let me know how to configure Selection variant for transportation planning.
Regards,
Sunya

Hi Sunya,
Check the links below.
http://help.sap.com/bestpractices/industry/pharmaceuticals/v346c_uk/documentation/SCM/_Toc27302002
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8bbeae90-0201-0010-f887-8287448cbb9b
   In these you wil find the selection variant for transportation planning
   Reward points if it helps.
Regards
Karan
Message was edited by:
        Karan Bhatia

Technical Content BI Stat`s missing Transfer Rules for 0TCT_CA1

Hi,
I installed the new 7.0 technical content and had several glitches. Some are fixed with the new SP16, that we installed.
We are at BI Cont 7.03, patch 8.
There is no business content for the Frontend & OLAP Statistics (highly aggregated) 0TCT_CA1 transfer rules - although the cube and communication structure are there - as well as the virtual and multi cube with a lot of queries etc.
Does anyone have a solution for this?
Thanks!
Kathleen

Hi Kathleen Cooke ,
I am having similar issue now, can you please let me know if you know the solution for the below problem..
I am trying to activate the Business Content for BW Statistics, but the datasource and the Transfer Rules are missing for the 0TCTPRCSVAR_TEXT and also a couple of BW Statistics objects...
I am on
BI_CONT 703, level 0005, Support Package SAPKIBIIP5
SAP_BW 700, level 0012, Support Package SAPKW70012
Thank You,
Varun.

Error in Transporting Transfer rule/structure to Q for generic DS

Hi,
We're in NW2004s. we're getting error when we transport Transfer Rules and Structure of generic data sources to Q.
In R3 Q the DS is active and it pulls data in RSA3 and it is replicated and all the fields are available in BW side as well, but when we transport TR/TS i still get error saying the Datasource is not active. This happens only for generic ones.
Any idea.
thanks
Mayil

Hi,
have you inserted both the transfer rule and the communication structure in the same change request?
When you transport an InfoSource, all it's dependent objects must be present in the same change request; in this way the datasource will be activated.
I hope it helps you,
Vito

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

Latest iTunes & Artist Selection Window for Shuffle

Hi,
I've got the bizarre case of my artist window on the Shuffle / Music tab not showing all of my artists, some of them are just missing completely from the window.
The files are in the library and I've moved it from external disk to external disk to tidy it up, but still they're missing. I can locate the artists in the Library and play the songs, so I'm totally confused as to why I can't select the artist on the music tab.
Any suggestions / thoughts?

This works for a music album, but not for films.... How can I create CD and track numbers if I want to put films together to an album? The info window for films does not show that fields any more, does it?!?

Unable to find Transfer Rules and Data Source for 0PERSON Info Source

Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.B

Hi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem.

Missing Icons in "Multiple Selection Window"

Hi Folks,
I am trying to solve an issue in regards to missing icons.
In any report when you click on the multiple selection icon on the right, you get a new window with 4 options.
1. Select Single Value (Green Dots)
2. Select Ranges (Green Dots)
3. Exclude SIngle Values (Red Dots)
4. Exclude Ranges (Red Dots)
We are upgrading our system to ECC6.0 from 5.0 and I do not see these icons in DEV and Quality since the upgrade. Is this a setting or Config? Please advise
Regards
Mahesh.

Any idea folks? Still having this issue.
Your help is appreciated.

Transport Error while moving Transfer rules - RS_ISMP_AFTER_IMPORT for object type(s) ISMP ( )

Hello Experts
Strucked up with an issue while transporting the Transfer rules that are created for an UPFILE source system.
Transport is included with list of Data source Replica, Transfer rules, Transfer structure and Info Package.
My data Source : ZVPRCRDT for an UPFILE
Below is my error screen :
Tried to resolve the error by moving the Data source Replica as an individual Transport.
Still see the same error and my data source is active in the current system.
Looking for a resolution to find out the root cause.
Any help is appreciated...

Thanks for your response Ram.
My Source System UPFILE is in active mode.
Unsure why system is throwing error as source system assignement was inconsistency.
All fields are mapped perfect with one-one relation.
Worked by reassigning the UPFILE - source system to the data source but still i m seeing the same error : Data Source doesnt exist in source system of version A.
Transported the DS alone to Quality initially where i m unable to find the transported data source in my quality(target). DO i need to perform replicate meta data ...something like that in quality so that imported data sources will get refreshed?
If so can you let me know the approach.
Thanks

Cannot See Transfer Rules in Transport Connection

Hello,
I have searched Notes and Forums and have not found a solution for this!
I performed some configuration in our newly upgraded BI system. We
were on BW 3.5 and upgraded to BI 7.0
We also change how our landscape was interconnected.
Our BW Dev system used to connect to our R3 Sandbox system.
Now our BIDev system connects to our ECC Dev system.
This is the first project i have worked on since the upgrade was
successful. What I am finding is that I get the following transport
error when I look at the STMS logs from BID to BIQ.
Transport Error
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
No activation possible.
Here are the details when I click to get more info on the error message:
Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
the transport connection to create a consistent request.
Wierd Behavior
The big issue now is that when i go to the transport connection in RSA1
and I want to collect Transfer Rules, I see a small subset of all the
transfer rules I would expect to see. I am looking specifically for
the transfer rules: 1_CO_PA2900010_DS PCDEVC200
Similiar behavior occurs when i am looking for "3.x DataSources" in the
transport connection
I can see these rules in other areas of RSA1 such as Infosources.
Please assist with finding these transfer rules in the Transport
connection.
Other then this transport both ECC and BI system landscapes are up and running normally.
Please help
Thanks!
Nick

Bryan,
Thanks for jumping onto this thread. I am going to complete the transports and see if i have any system name conversion issues to address. I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
To answer your questions:
1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS. The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
2. To what Source system do the transfer Rules belong to that you are missing?
---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
---Bryan: The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
Thanks!
Nick
Edited by: Nick Bertz on Dec 21, 2009 3:11 PM

No rows selected in table Transfer Rules

Hi All,
I have a Generic master datasource which is working fine. I am trying to append a field ZEINH to generic existing master datasource which uses user exit in R/3. It is working fine in R/3.
I have replicated R/3 datasource to BW and assign source system and datasource to infosource.I can see the ZEINH field in Transfer structure .I have tried to map ZEINH with infoobject of same domain and data element in the Infobject assign column of Transfer rule.
When It does not propose transfer rule for new field,however old fields are there. When I select new field and try to transfer to the comm.struc/Trns. rule column, it gives me error"No rows selected in table Transfer Rules"
Thanks in advance for your attention

Hi,
In 'Transfer rules' tab, in the right frame, in the 'Infoobject' column, type in a name of infoobject to which you want to map incoming data from datasource.
Best regards,
Eugene

Transfer Rules for two Source System in Production

Hi All,
I have a question.
I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
Thanks is advance.
Regards,
Komik Shah

Hi,
If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
In BW Production, you then then maintain the source system conversion of both source system.
Thanks.

Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Missing Transfer Rules in Selection Window for Transport

Similar Messages

Maybe you are looking for