Missing unknown device driver
I do not know what hardware this is, but here are the hardware IDs. Can anyone tell me how to go about obtaining this driver. this is the last one that i'm having problems with. Thank you in advance.
USB\VID_138A&PID_003C&REV_0086
USB\VID_138A&PID_003C
This question was solved.
View Solution.
Hi,
You need CyberLink YouCam software. Please download from the following link:
http://h10010.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-123546-1
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
Hi Sir,
I am using hp notebook hp15-d003txt os window 7 64 bit.
Unkonw driver is missing. Please see in screen shot.
Here is harware id. screen shot.For any one trying to help out, these are the drivers OP have tried and failed:
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/Unknown-Device-driver-need/m-p/4896953
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
Thinkpad E540 Unknown Device Driver "Compatible ID" IUSB3\ROOT_HUB30
Can anyone help me resolve this issue? I have an unknown device driver. Under "Compatible IDs" in Device Manager it shows
IUSB3\ROOT_HUB30
What is this, and where can I get it's correct file?
tyDear Triceiver
Welcome in lenovo community
Can you please send us your machine serial number so that we can get you the compatible driver ?
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I have a ne
I have a brand new M83 with Windows 7x64 running on it. I have run the latest System Update 5 and I am still missing drivers for one device. I have also run Windows update and have nothing left to install. Need some help trying to figure out what driver is missing please.Under the M83's Lenovo Drivers, try downloading the SCCM Package if available. It has a bunch of drivers in it. Had the same problem. Right-clicked the unknown device, selected Update Driver Software, browsed to the extracted SCCM download (include subfolders), and let it search for the driver. I believe it was an ACPI driver that was missing - which usually the Lenovo Update and Drivers utility finds on other models.
-
HP ProBook 4540s missing unknown device
This is my 3rd day since i bought this new HP probook 4540s [Product No. B9A39PA#UUF] and i like it, i made a clean install for windows 7 ultimate x64 and i've just realised that the hp drivers support page dose not has any drivers for the ultimate version, so i downloaded the proffesional drivers, now i have all devices are installed except two devices named unknown device, please help me. The hardware Ids: 1- unknown device USB\VID_138A&PID_003D&REV_0104
USB\VID_138A&PID_003D 2- unknown device ACPI\HPQ6000
*HPQ6000Hi, Can you post back with the following details. 1. The full Model No. and Product No. of the notebook - see Here for a guide on locating this information. 2. The full version of the operating system you are using ( ie Windows 7 64bit ). 3. R
-
Hp compaq nc6220 unknown device driver
I recently got this laptop running smoothly again and i have one (code 28) i cant seem to find...its listed as unknown device with a yellow question mark in device manager can someone please help?
I ended up finding it myself...
here is the url if anyone else has this issue....
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32... -
HP 350 G1 ACPI\HPQ6007 *HPQ6007 Unknown Device Driver for Windows 7 Ultimate x64
Hi,
I have recently purchased HP 350 G1 latop and there is a missing driver in device manager under Windows 7 Ultimate x64 that I cannot find out what driver it is, could you please help identify the hardware and provide me link to the driver?
ACPI\HPQ6007
*HPQ6007
Thanks.
James
This question was solved.
View Solution.Hi,
Download and install HP 3D DriveGuard from the following link.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6709431&swItemId=ob_124661_1&swEnvOid=405...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
how to get the pci device???
Hi:
Download and install the first driver on the list at the link below.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT... -
Download the missing device driver
hai,
i am installing Windows 8 Pro ,but missing some device driver
Device Ids:
PCI\VEN_10EC&DEV_5229&SUBSYS_183E103C&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_183E103C
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
So please replay the link adderss to solved him.The 2nd Driver On the list is Realtek PCIE Cardreader.
Here is the link--> Driver
The 4th one's link is Driver 4th
Hope this help. -
Equium A60-157: error caused by device driver
Hi all,
I'm trying to write my PhD thesis at the moment and am being hampered by my laptop! It keeps randomly bringing up the blue screen of death and then restarting; when it's all loaded up, I get a 'serious error' message that says 'error caused by device driver'. As far as I know, all the programs I have are compatible... I was advised to restore factory settings, which I did a few months ago. And I've had the BIOS update suitable for my computer. But it's still happening!!
If it helps, the programs I use daily are Microsoft Word, Access and Powerpoint, Internet Explorer and MSN Messenger. I don't run any high spec games (only Minesweeper occasionally!)
What can I do? Does anyone else have this problem? Any advice would be much appreciated, as these crashes are not helping my work!
Thanks...Hi guys,
I seem to have a similar problem. About a month ago I reinstalled windows using the product recovery cd and three days later I started getting a blue screen. But the error occurs only when shutting down (not always, I can`t see any pattern)- right before the shut down itself, windows has already logged off and settings are saved. The error code is 0x50 and the report says it is caused by an unknown device driver.
The day that stop error started I installed an educational software (Leankey's) for which I used a virtual cd. But at the initial launch the program "freezed" and I had to close it and open it again, there wasn`t a problem. After that I tried to copy some files on a blank cd (without using any burning software) and it said that the device was not accessible.
I tried disabling DMA but that didn`t help. In the event viewer I saw error messages that say the cdrom has a bad block. I`m not sure whether this has something to do with the stop error but they started at the same time. I can still burn cds with other software (nero). I tried to update the device driver but it didn`t help.
Maybe I have to uninstall the driver first but from the device manager when I check the properties of the device (driver details) it uninstalls the device and the driver remains. Should I delete the driver files manually? I have checked all device drivers and they are all compatible. All installed software is digitally signed. (I immediately removed the Learnkey`s software but I think it has changed some dll...
I will appreciate any suggestions.
P.S. When I run the toshiba diagnostic tool it skips testing the cd/dvd but it doesn`t say why.
Details about my system:
Satellite Pro L10
MS Widows XP Pro 5.1.2600 SP2
BIOS: v 2.60 (updated 2 days ago)
Intel Celeron M 1.60 GHz
496 MB Ram
55.890 GB
Video: Intel 82852/82855 GM/GME Graphics Controller ver=6.14.10.3929
Sound: Conexant AC-Link Audio
Network: Realtek RTL8139/810x Family Fast Ethernet NIC
Modem: AC97 SoftV92 Data Fax Modem with SmartCP ver=7.12.13.50
IDE Device 1: Fujitsu MHV2060AT
IDE Device 2: None
IDE Device 3: Mat****a DVD-Ram UJ-831S Firmware=1.90
Internet Explorer:
6.0.2900.2180 -
HP Elitebook Folio 9480m drivers missing / Device Manager PCI Device and Unknown device?
Hello all, I have already installed Windows 8.1 Pro x64 and i have on the device manager still 2 missing drivers they are PCI Device and Unknown device??
Please see attached a printscreeen. ANy idea which drivers are missing? Thank you allHi: You need this driver for the PCI device... http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7089928&swItemId=ob_134503_1&swEnvOid=4158 I gave you the driver for the unknown device when you had W7 on the machine, so it is probably the same one. http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7089928&swItemId=ob_132986_1&swEnvOid=4158 If it is not that one (or you had two unknown devices at one time, and already installed the 3D driveguard driver), then it is probably this one... http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7089928&swItemId=ob_133322_1&swEnvOid=4158
-
Can't install Windows 7 Pro x64 - device driver missing - can't eject DVD
Hello,
I am trying to install Windows 7 Pro x64 - I create the partition in boot camp and start windows install process. **During the Windows install process**, it says "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: if the Windows installation media is in the CD/DVD drive, you can safely remove it for this step".
Apparently the drivers are on the OSX install DVD. But, there is no way to eject the windows DVD! Why on earth is there no manual eject on Macs? Is there another way to eject? I tried to put a paperclick in the slot next to where a CD is inserted but it didn't do anything. Is there another way to get Windows to see the correct device drivers?
I am all for clean slick designs, but when it does not have all required functionality, it is kind of useless.
I am talking to Mac Support and they can't help.
Looks like I will have to return this Mac, I also need to boot into full Windows (without Parallels or VMWare) to do my work.
dan
Message was edited by: dbpersonYou don't mention what Mac you have, so I'd have to say there is almost no way to help.
IF the 7 Pro x64 came download ISO thru EDU, you have to burn it, and if you use Disk Utility, at 2X reduced burn speed... otherwise it won't work.
A VM isn't fussy and can use ISOs.
If you want both native and VM, to have Windows installed on its own hard drive and use it under OS X, then you have to install it and use Boot Camp Assistant.
I'd say it is all about your DVD media. -
Windows needs to install driver software for your unknown device
Windows needs to install driver software for your unknown device
This is the message that i get when ever i plug in my ipod touch to my computer. the computer is running on vista. i dont know what to do, because i tried to follow the steps suggested, but it didnt work, the computer said that it couldnt find anything and to check with apple for some driver software. HELP!!!The iPod touch and iPhone do not use the same type of USB drivers that other Apple devices use. They both require Apple Mobile Device Services to be running. Using this tech article as a guide, you can easily fix this: http://support.apple.com/kb/TS1567
-
WINDOWS 7 x64 "Unknown device" FULLY SOLVED. driver for ACPI\VPC2004. OSD is NICE
ALL OF THIS PERFECTLY WORKING WITH WIN 7 ON Lenovo Y510
Install all of your drivers but ATK tool and ACPI
1. Install ACPI driver x64 http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_627.html
2. Install Energy management tool (you may install only "utility" or with managment tool, it depends on you) from Y530 x64 version http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_640.html
2. Install ATK http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_641.html
3. Install System Interface driver http://www-307.ibm.com/pc/support/site.wss/license.do?filename=mobiles/7jif11ww.exe
All o files extracting in C:\Drivers\.... If you had some troubles with installation you may try to run setup from there.
Reboot when asked for it.
(Win 7) If some is not running try in any compatibility mode (in Vista SP1)
4.Go to folder where Energy utility installed (in my case C:\Program Files(x86)\Lenovo\Energy Management)
5.Run file DPInst.exe in Vista SP1 compatibility mode OR
5.1. Go to the device manager select unknown device (device ID ACPI\VPC2004) and install/update driver manually. Select driver in C:\Program Files(x86)\Lenovo\Energy Management (that's my folder, and I thin yours too). The file with driver is VPC.INF !!!!
I have got fully working OSD
Message Edited by pol331 on 08-04-2009 10:45 AM
Message Edited by pol331 on 08-04-2009 10:48 AM
Message Edited by pol331 on 08-04-2009 11:01 AMThanks a bunch pol331. Your post from three years ago helped me successfully install win 7 64bit!!! So if you're still around this forum here's a big thumbs up from me, muchas gracias amigo!
-
Windows 7 RC installation on MacBook Pro: 'DVD drive device driver missing'
I'm trying to install the Windows 7 RC on my unibody MacBook Pro (purchased november 2008). I create the partition in Boot Camp, insert the install DVD, and restart the system. Then the Windows setup starts as it's supposed to (Windows is loading files). The install program launches fine, and I get to choose language settings.
And now it all fails. After I've chosen language settings, I get the message: "A required CD(DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now."
Screenshot of the message: http://img25.imageshack.us/my.php?image=dsc00102yyh.jpg
I'm kinda baffled by this message. Obviously the drive can be use by the install program, but it still complains of a missing driver. I had no trouble installing the Windows 7 beta earlier this year.
I've done some googling, and it appears to be problem experienced by some others. Someone had the issue on an Asus machine (I think), and the solution was to download the driver and out it on a USB stick. But I can't seem to find the driver for the MBP DVD drive anywhere.
Has anyone else experienced this issue?After countless days trying to solve this problem, I feel I can now add to the few solutions presented on the various forums of the internet. I'll post here because 1: i'm a mac user for everyday life although like most have as many pc's as well. 2: I already have a login for these forums!
okay so i tried everything from re-burns to usb install (which I could not complete because removable drives are not recognized by xp and I don't have a vista system). The problem for me ended up being because the DVD drive was plugged into the primary master ide channel. My hard drive for the unit i was installing windows on is sata and was configured as such (not bridged into IDE channel by bios). So in a nutshell it seems like the hard drive and the DVD drive are nit picky in regards to the IDE configuration of the drives themselves. This won't help for virtualization on a mac pro I realize but nonetheless is food for thought hopefully for all the people searching for " windows 7 install cd/dvd device driver missing " in their search engine!
Oh boy one more reason to love mac's
Christos
Maybe you are looking for
-
Problem copying files from pc to itunes
i have trouble in copying my movie files from my pc to itunes. i already drag the files to itunes and add file in the library but still I cannot find the files that i want to add in itunes. need some help here. thanks
-
A lot of windows appear, when i watch Altera's html5 trainning lesson, but ie do not
when i watch Altera's online trainning lesson(the address is http://www.altera.com/customertraining/webex/MemInt_CN/presentation_html5.html), Sometimes, the lesson will pop another webpage to show something(for example, click 5.2.2 or 6.7 when timeli
-
HT4759 lost all of my picture in icloud
hello i lost all of my histroy of all my picture how get back up ?
-
Dynamic SQL for selection-option???
Hi, I am trying to select a table from the parameters (range ) , but every time i run it give me a dump witn error in where ...(itab) First i declare : data : cond(72) TYPE C, itab LIKE TABLE OF cond . select-options: p_auart FOR vbak-auar
-
Hello world, I'm running FCPro 5.1.2 UB since a while, so I'd like to import some old projects done under FCPro 3.0.2. Things seems simple but get tricky, because a good half of the files are not importing into rel.5.1.2: I get a dialogbox saying tha