Missing updates

Ok I created a software update group for my test group for March 2 questions -
1. Where do I check to see the updates that are in that March group
2. I am in that test group and deployed the March updates, however I am missing an update that I added to the March updates got all the other ones but one...
MSB

Hi,
I recommend you check the report “Deployments that target a computer”.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Update (0 new / 0 changed) Warning received Message Missing Update Finished

    The FULL load is running for long time and after some time it fails with processing Overdue. ( It is loading directly into datatargets no PSA as this is Daily FULL load to cube, deleting the previous request) The job overview is successfully finished in source system.
    While load running in details tab under processing..
    1)Data Package 6 ( 7407 Records ) : Missing messages -->
    2)Update ( 0 new / 0 changed ) : Warning received
    3)Message Missing: Update Finished for Cube
    4)Processing end : Missing messages .
    When clicked on helpnode on each step:-
    1)Data Package
    A data packet is either sent with transfer method IDoc or PSA to BI. You have the option here of viewing the data received and of editing it where necessary, of posting the data packet in simulation, and of canceling in simulation, and, if it has not yet been posted successfully, of starting the update manually.
    2)Update
    See also Data packet processing steps
    By this the persistent saving of data is understood in its final target object
    3)Processing Message
    see also Data Packet Processing Steps
    Single message from the processing of a data packet. Some messages contain references to application logs or other requests. The monitor then allows corresponding jumps.
    4)Processing End
    see also Data packet processing steps
    If the processing of a data packet has been finished then any error messages for each process in the step up until this point are delivered to the monitor and to the called program (in the case of transferring by IDoc thus to the IDoc management). If no errors arose then a success message is logged per process.
    Messages from source system
    see also Processing Steps Request
    These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
    From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.

    Hi
    Try to transport the request again and check...
    Perform the consistency test with 'RSRV'...
    Check notes in this link if they could help u....UNCAUGHT_EXCEPTION
    Regards
    Gaurav

  • SUS - not only missing updates, but also hiding some...

    Hi *,
    i have the same problem with OSX SUS on 10.6.2 as described in several threads within this forum... with some add-on: not only that SUS is missing some of the updates available on Apple's public SUS service, it seems that at least one of the missing updates shows up in an intermitting way.
    In Server-Admin / Software Update Service / Updates the package "Final Cut Server Update" V1.5.1 of 11/24/09 does not appear on the list of available updates, unless i press the tiny rescan button which is located just below the list of update package. When i press it, the "Final Cut Server Update" appears immediately on the list. BUT it doesn't show up persistently -> when i switch in Server Admin over to another Service, e.g. SMB, and toggle the scope back to SUS, then all the packages which had been shown before toggling are displayed again, except that "Final Cut Server Update" is missing again.
    Really weird behaviour... hope that Apple fixes that soon, SUS is one of the major reason's why i'm running a MacMini Server @ home - i'm sitting with four Macs on a tiny network connect.
    Regards, KS

    I'm with you on this. Have really tried to get SUS running as I can really see the benefit, including resetting it completely several times.
    Thought I had it working, but now realised that even though the latest version of Safari 4.0.4 is downloaded and enabled, clients are reporting they are up to date (They have Safari 4.0.3).
    The OS 10.6.2 update downloaded correctly - so why not this?
    There are some serious flaws with SUS. Even the way you have to specify the server path is wrong if you ask me. Why can't there be a browse button? Why do you have to remember / look up what the correct filename is for the sucatalog depending on the OS version. Seems rather clunky to me.
    Andrew

  • Update Retriever missing update for S30 Model Type 4351

    Update Retriever missing update for S30 Model Type 4351. Missing update for Nvidia External VGA Driver Version 321.01 for Windows 7 (64-bit), Windows 8 (64-bit) - ThinkStation S30, D30. Retriever only lists udpate for AMD external VGA driver. This model shipped with Nvidia Quadro K2000 graphics card.

    Sorry for the delay.  Working through some internal issues regarding content support for ThinkStation.  Trying to get the content updated and released as soon as possible.  
    I believe the driver you are looking for has been replaced by the following:
    http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028285
    Note:  the readme shows a more complete list of supported adapters

  • Write-Progress in PowerShell script for installing Missing Updates

    Hi, I had a previous question here
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/88931488-3b2c-4c08-9ad3-6651ba9bbcef/action?threadDisplayName=progress-indicator-for-installing-missing-sccm-2012-r2-updates
    But that method is not working as expected.  The progress bar displays then continues to increment past 100 throwing an error each time.
    I'm thinking I could use a foreach loop for the missing updates but I'm just lost when it comes to Powershell syntax.
    For example:
    # Get the number of missing updates
    [System.Management.ManagementObject[]] $CMMissingUpdates = @(GWMI -ComputerName $server -query "SELECT * FROM CCM_SoftwareUpdate WHERE ComplianceState = '0'" -namespace "ROOT\ccm\ClientSDK") #End Get update count.
    $result.UpdateCountBefore = "The number of missing updates is $($CMMissingUpdates.count)"
    #Install missing updates.
    #Begin example code, not tested.
    Foreach ($update in $CMMissingUpdates)
    $i++
    If ($CMMissingUpdates.count) {
    $CMInstallMissingUpdates = (GWMI -ComputerName $server -Namespace "root\ccm\clientsdk" -Class "CCM_SoftwareUpdatesManager" -List).InstallUpdates($CMMissingUpdates)
    Do {
    Start-Sleep -Seconds 15
    [array]$CMInstallPendingUpdates = @(GWMI -ComputerName $server -query "SELECT * FROM CCM_SoftwareUpdate WHERE EvaluationState = 6 or EvaluationState = 7" -namespace "ROOT\ccm\ClientSDK")
    #end my example code.
    #The code below is working to install updates but Write-Progress isn't.
    If ($CMMissingUpdates.count) {
    #$result.UpdateCountBefore = "The number of missing updates is $($CMMissingUpdates.count)"
    $CMInstallMissingUpdates = (GWMI -ComputerName $server -Namespace "root\ccm\clientsdk" -Class "CCM_SoftwareUpdatesManager" -List).InstallUpdates($CMMissingUpdates)
    #Set the missing updates to variable for progress indicator.
    $updates = $CMMissingUpdates.Count
    $Increment = 100 / $updates
    $Percent = 0
    Do {
    Start-Sleep -Seconds 15
    [array]$CMInstallPendingUpdates = @(GWMI -ComputerName $server -query "SELECT * FROM CCM_SoftwareUpdate WHERE EvaluationState = 6 or EvaluationState = 7" -namespace "ROOT\ccm\ClientSDK")
    #Not 100% sure $result.UpdateCountBefore is needed below.
    $result.UpdateCountBefore = "The number of pending updates for installation is: $($CMInstallPendingUpdates.count)"
    Write-Progress -Activity "Updates are installing..." -PercentComplete $Percent -Status "Working..."
    $Percent = $Percent + $Increment
    } While (($CMInstallPendingUpdates.count -ne 0) -and ((New-TimeSpan -Start $StartTime -End $(Get-Date)) -lt "00:45:00"))
    Write-Progress -Activity "Updates Installed" -Status "Done" -Completed
    } ELSE {
    $result.UpdateCountAfter = "There are no missing updates."}
    $result

    The increment should be 100  / (max number of items)
    That will not exceed 100 through (max number of items ) iterations in a loop
    Mathematically that can be written as 
    100 / (Max Number of items) * (max number of items ) iterations in a loop
    = 100 * ( (Max Number of Item) / (Number Iterations in a loop) )
    = 100 * 1 = 100
    The (max number of items) and (Number of Iterations in a loop ) need to be based on the same number.
    In the script, it is not based on the same number.
    The maximum number of items is $CMMissingUpdates.Count
    The number of iterations in the loop  is based on the condition 
    ($CMInstallPendingUpdates.count -ne 0)
    Which causes the iterations of the loop to exceed $CMMissingUpdates.Count
    Assuming the $CMInstallPendingUpdates.count is going down (is decremented) through the loop, then
    $Increment = 100 /
    $CMInstallPendingUpdates.count

  • Missing update features?

    I got the newest version of Lightroom (5.7.1 (assured by image 1)) after reading about the new features (HDR and Panorama merge) in the update window (shown in image 3).
    BUT when clicking "Search for updates" I still get the same window (image 3) that originaly made me update. And as one can see, in image 2, there is just no "Merge" - option at all.
    I'm looking forward to your solution.

    Thanks a lot!
    Von: dj_paige 
    Gesendet: Donnerstag, 23. April 2015 16:20
    An: Matthias Wiesemes
    Betreff:  missing update features?
    missing update features?
    created by dj_paige <https://forums.adobe.com/people/dj_paige>  in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/7470467#7470467>

  • "VLD-2750: Missing update matching criteria in TARGET_TABLE"

    Re: "VLD-2780: Unable to generate Merge statement". ( In Reply To : Re: "VLD-2780: Unable to generate Merge statement". ) Sep 3, 2004 2:37 PM
    Reply
    Jean Pierre,
    I changed the logical key to the setting you said and I am able to see the merge statement, however when I do the validation I am now getting :"VLD-2750: Missing update matching criteria in TARGET_TABLE".
    Any ideas?
    Thanks,
    AK

    There are two ways of matching incomming rows with rows present in a target table during updates. One is to use the key constraints. You can see this by inspecting the target object properties in the mapping and checking the 'Match by constraint' parameter. This is recommended in case you have defined key constraints on the target objects.
    The other (if match by constraints is set to 'no constraints') is to set the Match Column when Updating to yes (and conversely, Load Column when Updating to 'No') for individual columns that have to be matched (as sugested above).
    If you get the VLD-2750 message, it means that one of the target objects does not have any matching criteria set for updates. In an insert/update mapping you should use either the first or the second matching method for all your target objects.
    Regards:
    Igor

  • Trying to create a report that shows all 8.1 machines missing update 1 (KB2919355)

    Currently I have a report that polls every machine that talks to our SCCM 2012 server and only displays Windows 8.1 machines.  
    I'd like to modify the code where it will only show the 8.1 machines that are missing Update 1.  That way we can go through and patch the ones that need it.  Is this possible? 
    The existing query looks like the following: 
    SELECT
    SCCM_Ext.vex_R_System.Name0
    ,vMacAddresses.MacAddresses
    ,v_GS_PC_BIOS.SerialNumber0
    ,v_GS_COMPUTER_SYSTEM.Model0
    ,SCCM_Ext.vex_R_System.Operating_System_Name_and0
    ,v_GS_COMPUTER_SYSTEM.UserName0
    FROM
    SCCM_Ext.vex_R_System
    INNER JOIN vMacAddresses
    ON SCCM_Ext.vex_R_System.ResourceID = vMacAddresses.ItemKey
    LEFT OUTER JOIN v_GS_PC_BIOS
    ON SCCM_Ext.vex_R_System.ResourceID = v_GS_PC_BIOS.ResourceID
    LEFT OUTER JOIN v_GS_COMPUTER_SYSTEM
    ON SCCM_Ext.vex_R_System.ResourceID = v_GS_COMPUTER_SYSTEM.ResourceID
    WHERE
    SCCM_Ext.vex_R_System.Operating_System_Name_and0 like '%6.3'
    ORDER BY SCCM_Ext.vex_R_System.Name0

    Here is the code I use to pull 64bit machines that don't have CU1 (BTW cu2 is now out):
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SY STEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM .Client from SMS_R_System inner join SMS_G_System_SMS_ADVANCED_CLIENT_STATE on SMS_G_System_SMS_ADVANCED_CLIENT_STATE.ResourceID
    = SMS_R_System.ResourceId inner join SMS_G_System_COMPUTER_SYSTEM on SMS_G_System_COMPUTER_SYSTEM.ResourceID = SMS_R_System.ResourceId where (SMS_G_System_SMS_ADVANCED_CLIENT_STATE.DisplayName = "CCM Framework" and SMS_G_System_SMS_ADVANCED_CLIENT_STATE.Version
    != "5.00.7958.1203") and SMS_G_System_COMPUTER_SYSTEM.SystemType = "x64-based PC"
    Minor mods to this or your code should do the trick.
    ...I see you're talking an update to the OS, rather than SCCM update. Still hopes this helps.
    Ben JohnsonWY

  • WSUS lists app. 178 missing updates for the Windows 8/8.1 clients, but the clients report that no updates are necessary

    We are operating a small network consisting of a SBS 2011 and a few clients, most of which operate WXP and W7. Some time ago we converted the first client to W8 and noticed, that WSUS reported a big number of missing updates (all being language packs and
    language interface packs), which the client never pulls, as from its perspective everything is in best order. When searching for updates over the internet the client again does not detect anything missing.
    We first thought of an issue with this single W8 client, as neither the WXP nor the W7 machines show the same phenomenon, but recently we introduced the first two W8.1 clients, and interestingly we saw the same problem. The question now is, why
    does WSUS believe that these updates were necessary whilst the clients themselves are convinced that everything is fine? And who is right, WSUS or W8/8.1? (I tend to believe the clients, though.)
    Best regards, Dietmar.

    why does WSUS believe that these updates were necessary whilst the clients themselves are convinced that everything is fine?
    Because you're misinterpreting the meaning of the state "Needed"...
    which is discussed elsewhere in this forum ad naseum.
    And you're making the mistake of trying to compare information with WU with information from WSUS. The two are not comparable.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Office 2013 Rollout - Collect missing updates

    I have dialed in my custom installer for Office 2013. What's the easiest way to gather all missing Office 2013 updates post-SP1 so I can drop them in the update folder?

    @DonPick
    I'm still making a final decision on whether or not to include all the patches at install time. If I wait for the Software Updates to come through then the user's first experience will not include everything. I'm concerned they may discover issues that are
    directly related to the patch content, giving the user a false sense that IT doesn't know what they're doing =)
    On a Windows 7 VM (1 CPU / 2 GB Memory) a complete uninstall of Office 2010 and install of Office 2013 32-Bit w/ SP1 took ~11 minutes to complete. This includes all the follow-up patches through May 2014. Of course my install package grew from ~850 MB to
    ~2 GB. Another issue I'm going to have to face....

  • Office 2013 small business version is missing UPDATE NOW

    Hi
    I'm  currently running office 2013 version 15.0.4433.1508 and trying to update, however it doesn't seem to auto update even though option is selected to auto update.
    The option to update manually is missing  i.e. "File-> Office Account-> Update Options->
    Update Now"
    please advise why my office is not updating or doesn't allow the option to update now?
    thanks

    How did you configure the Update option when deploy your Office 2013?
    Please publish your configuration.XML file. If this is a corporation network env, you might also want to check with your admin and see if they have re-configured your Office installation.
    Aravindhan Battepati

  • Missing update for a game app after updating ios7 any ideas how to get the update

    Went to update a game app this morning, had already hit update when the i os7 update screen popped went through with the ios update but after ipad restarted the game update is completely missing any ideas how to get the update back no luck so far

    Hello THEVIN7
    The next step if it is not updating, would be to delete the app and then download it again. Check out the general troubleshooting for apps purchased form the App Store.
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/ts1702
    Regards,
    -Norm G.

  • Missing update package xproto-7.0.14-1-i686.pkg.tar.gz

    today's updates include a buttload of updates. one of which is xproto-7.0.14-1-i686.pkg.tar.gz, even though its not in the official repos. which is still stuck at 7.0.13, am i missing somehting? or did this package sliped?
    posting my pacman -Syu
    :: Synchronizing package databases...
    --2008-11-30 14:45:07-- ftp://ftp.archlinux.org/core/os/i686/core.db.tar.gz
    => `/var/lib/pacman/core.db.tar.gz.part'
    Resolving ftp.archlinux.org... 209.85.41.144, 209.85.41.145
    Connecting to ftp.archlinux.org|209.85.41.144|:21... connected.
    Logging in as anonymous ... Logged in!
    ==> SYST ... done. ==> PWD ... done.
    ==> TYPE I ... done. ==> CWD /core/os/i686 ... done.
    ==> SIZE core.db.tar.gz ... 32379
    ==> PASV ... done. ==> RETR core.db.tar.gz ... done.
    Length: 32379 (32K)
    100%[======================================>] 32,379 35.4K/s in 0.9s
    2008-11-30 14:45:10 (35.4 KB/s) - `/var/lib/pacman/core.db.tar.gz.part' saved [32379]
    --2008-11-30 14:45:10-- ftp://ftp.archlinux.org/extra/os/i686/extra.db.tar.gz
    => `/var/lib/pacman/extra.db.tar.gz.part'
    Resolving ftp.archlinux.org... 209.85.41.145, 209.85.41.144
    Connecting to ftp.archlinux.org|209.85.41.145|:21... connected.
    Logging in as anonymous ...
    Error in server response, closing control connection.
    Retrying.
    --2008-11-30 14:45:12-- ftp://ftp.archlinux.org/extra/os/i686/extra.db.tar.gz
    (try: 2) => `/var/lib/pacman/extra.db.tar.gz.part'
    Connecting to ftp.archlinux.org|209.85.41.145|:21... connected.
    Logging in as anonymous ... Logged in!
    ==> SYST ... done. ==> PWD ... done.
    ==> TYPE I ... done. ==> CWD /extra/os/i686 ... done.
    ==> SIZE extra.db.tar.gz ... 423025
    ==> PASV ... done. ==> RETR extra.db.tar.gz ... done.
    Length: 423025 (413K)
    100%[======================================>] 423,025 25.3K/s in 13s
    2008-11-30 14:45:27 (31.2 KB/s) - `/var/lib/pacman/extra.db.tar.gz.part' saved [423025]
    --2008-11-30 14:45:28-- ftp://ftp.archlinux.org/community/os/i686/community.db.tar.gz
    => `/var/lib/pacman/community.db.tar.gz.part'
    Resolving ftp.archlinux.org... 209.85.41.144, 209.85.41.145
    Connecting to ftp.archlinux.org|209.85.41.144|:21... connected.
    Logging in as anonymous ... Logged in!
    ==> SYST ... done. ==> PWD ... done.
    ==> TYPE I ... done. ==> CWD /community/os/i686 ... done.
    ==> SIZE community.db.tar.gz ... 372576
    ==> PASV ... done. ==> RETR community.db.tar.gz ... done.
    Length: 372576 (364K)
    100%[======================================>] 372,576 88.6K/s in 4.6s
    2008-11-30 14:45:35 (78.4 KB/s) - `/var/lib/pacman/community.db.tar.gz.part' saved [372576]
    :: Starting full system upgrade...
    :: Replace synaptics with extra/xf86-input-synaptics? [Y/n]
    resolving dependencies...
    looking for inter-conflicts...
    Remove (1): synaptics-0.14.6.99-2
    Total Removed Size: 0.07 MB
    Targets (19): xf86-input-synaptics-0.99.1-1 gstreamer0.10-bad-0.10.9-1
    gstreamer0.10-bad-plugins-0.10.9-1
    gstreamer0.10-ffmpeg-0.10.6-1 gstreamer0.10-ugly-0.10.10-1
    gstreamer0.10-ugly-plugins-0.10.10-1 libdrm-2.3.1-2
    libgl-7.2-1 intel-dri-7.2-1 mesa-7.2-1 orca-2.24.2-1
    policykit-0.9-7 libpciaccess-0.10.5-1 xf86-video-intel-2.4.3-1
    xf86-video-vesa-2.0.0-2 xkeyboard-config-1.4-1
    xf86-input-evdev-2.0.7-1 xorg-server-1.5.3-2 xproto-7.0.14-1
    Total Download Size: 0.08 MB
    Total Installed Size: 47.08 MB
    Proceed with installation? [Y/n]
    :: Retrieving packages from extra...
    --2008-11-30 14:46:14-- ftp://ftp.archlinux.org/extra/os/i686/xproto-7.0.14-1-i686.pkg.tar.gz
    => `/var/cache/pacman/pkg/xproto-7.0.14-1-i686.pkg.tar.gz.part'
    Resolving ftp.archlinux.org... 209.85.41.145, 209.85.41.144
    Connecting to ftp.archlinux.org|209.85.41.145|:21... connected.
    Logging in as anonymous ...
    Error in server response, closing control connection.
    Retrying.
    --2008-11-30 14:46:15-- ftp://ftp.archlinux.org/extra/os/i686/xproto-7.0.14-1-i686.pkg.tar.gz
    (try: 2) => `/var/cache/pacman/pkg/xproto-7.0.14-1-i686.pkg.tar.gz.part'
    Connecting to ftp.archlinux.org|209.85.41.145|:21... connected.
    Logging in as anonymous ... Logged in!
    ==> SYST ... done. ==> PWD ... done.
    ==> TYPE I ... done. ==> CWD /extra/os/i686 ... done.
    ==> SIZE xproto-7.0.14-1-i686.pkg.tar.gz ... done.
    ==> PASV ... done. ==> RETR xproto-7.0.14-1-i686.pkg.tar.gz ...
    No such file `xproto-7.0.14-1-i686.pkg.tar.gz'.
    --2008-11-30 14:46:19-- http://archlinux.c3sl.ufpr.br/extra/os/i686/xproto-7.0.14-1-i686.pkg.tar.gz
    Resolving archlinux.c3sl.ufpr.br... 200.17.202.1, 200.236.31.1
    Connecting to archlinux.c3sl.ufpr.br|200.17.202.1|:80... connected.
    HTTP request sent, awaiting response... 404 Not Found
    2008-11-30 14:46:20 ERROR 404: Not Found.
    warning: failed to retrieve some files from extra
    error: failed to commit transaction (unexpected error)
    Errors occurred, no packages were upgraded.
    anyone experiencing these?

    Yes, but here the package here continue to be not present
    It's only present in x86_64 repo.
    Last edited by Babets (2008-11-30 17:45:59)

  • Update Retriever missing updates for M93z 10AC

    When using update retriever to download drivers for 10AC Windows 7, it is not showing all of the drivers.  It is missing the following drivers:
    Intel Active Management Technology - SOL
    Intel Management Engine Interface
    and the video drivers
    Any help with this would be great.

    Hi Customer,
    Could you please tell me your  TVUR searching criteria? such as 2468/win7

  • Missing update

    I am attempting to create an interactive ebook but when I try to use Folio Builder it tells me I need an update, but Update Manager tells me I already have every available update. Am I maybe missing a plugin that I need to have in order to use Folio Builder or is this a glitch??

    Thanks Bob.
    I appreciate the help, I figured I was missing something.
    The message in the Indesign Folio Builder panel is a bit misleading as it just directs you to the automated update manager via the help menu, it should tell you that there is a specific file that you need to download.

Maybe you are looking for