Missing URL parameter: IterationId

Error: Missing URL parameter: IterationId
I get this error when I add a footer to my report. Is there a fix?
Report viewer 2010
Visual Studio 2008 sp 1
.Net 3.5
Browser = firefox, have not tried ie.
IIS = whatever ships with Windows 7 prof.
Thanks,
Sam

(Apologies for bumping this old, old thread; it was the first hit in Google when searching for this problem myself, so I thought I'd post how I resolved my issue in case others stumble upon it.)
Are you sure this is just from adding a footer? I was getting this error message myself, and it was due to the Line control. For whatever reason, the Line control tries to include a standard blank image right after it, but the URL is missing
that parameter in FireFox and Chrome (but not IE, as far as I can tell). When I remove all the Line controls, the error goes away. Make sure you don't have any Lines in your footer (or anywhere else on your report, for that matter.)

Similar Messages

Missing planning sequence as URL parameter (PLANNING_SEQUENCE) webdynpro

Hi,
I created an iview for Abap WebDynPro for 'zrsplf_file_upload' (webdynpro for load a flat file in IP) and assigned application name, application parameters (PLANNING_SEQUENCE=FILE_SEQ) but i get "Missing planning sequence as URL parameter (PLANNING_SEQUENCE)".
This one is working in when I run the webdynpro in BW with the same parameter:
Do you have any suggestion ?
Thanks

Hi ,
Check for the links given below:-
Check this blog IP:
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
if you're using the BPS:
through Web
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/708fc3f8-a61d-2a10-fb82-b7c237ae16ba
using SAPGUI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7034028c-ad1d-2a10-2c94-868e7707dfe2
Please open a seperate thread for the problem you are facing.
Regards,
Indu

Passing URL parameter to form

Hi, i'm currently building a back-end for a small site. What
i'm trying to do is enable a user to edit and update an article.
I've got a dynamic table, i'm trying to use a URL form parameter to
pass the unique ID of an article to a form that brings up the
article for editing, but its not working, its just bringing up the
same record whatever link is clicked in the dynamic table. Can
somebody point out whats missing? I'm using PHP & mySQL.
Thanks, any help appreciated.

You don't specify what language you're using, or how you're
populating your
form.
If you're using a recordset to populate your form, simply
edit it and then
set the filter to your ID field, and use the URL parameter to
capture your
variable. Make sure in your recordset for your page to
display the records
you put the same variable name as you use on your previous
page with the url
variable.
HTH,
Jon
"MarkAD88" <[email protected]> wrote in
message
news:e4f5s9$4l$[email protected]..
> Hi, i'm currently building a back-end for a small site.
What i'm trying to
> do
> is enable a user to edit and update an article. I've got
a dynamic table,
> i'm
> trying to use a URL form parameter to pass the unique ID
of an article to
> a
> form that brings up the article for editing, but its not
working, its just
> bringing up the same record whatever link is clicked in
the dynamic table.
> Can
> somebody point out whats missing? Thanks, any help
appreciated.
>

URL parameter in a stateless BSP - 2004s

We are on 2004s release (SP6) and have a custom BSP stateless application using MVC approach. A URL parameter is passed to the BSP as follows:
http://<host.domain.com>:8000/sap/bc/bsp/sap/<BSP App>/start.htm?sap-client=151&sap-sessioncmd=open&param=555
The Do_Init method of the main controller has the following code:
DATA: t_url_fields TYPE tihttpnvp.
CALL METHOD request->get_form_fields
CHANGING
fields = t_url_fields.
The internal table t_url_fields is not getting the parameter (It is empty).
I tried various other things and looked at previous SDN posts and could not find any other pointers. Everywhere the recommendation is to use the "get_form_fields" method. Also this used to work on the WAS 620 box earlier. Am I missing something fundamental here? This is a very old subject and I myself used it successfully earlier. Maybe the 2004s release wants something else? Checked OSS also.
Your help in this would be appreciated. Please let me know about how to troubleshoot this, because I tried everything from my side.
P.S: Points will be awarded..

Hi,
Yes, I think Dispatch_input() has to be put in Do_request event.
There is another alternative to using Get_form_fields method. In Do_Handle_Data event you can read the table form_fields and get the value of the input on the page.
read table form_fields into <workarea> with key name = '<url inputfield name>'.
get the value.
Hope this helps.
Thanks,
Rashmi.

How to change the fields in a JSF form based on a URL parameter

I am trying to build a generic JSF form of parameters which I want to dynamically change (i.e.
change which field is visible, what the label text should be, etc) based on a URL parameter.
I can set the fields using logic in the backing bean as an action on a command button pressed.
But how do I do it based on the URL parameter ? I can retrieve the URL parameter but I
don't know where to put (or hook) the Java code to do this initialization prior to
the page being rendered for the first time.
The fields in the JSF is being configured dynamically using a database table.
BTW I am using Jdeveloper 10.1.3.5
Thanks
CK

Thanks. I decided to set a Session bean to store the value of the URL parameter (if it is set)
and then to use the session bean to initialize the attributes of the fields on the JSF Page.
There also seems to be some caching of the inputText fields (i.e. it reverts back to the first
initialized value) even though I tried to change it using the URL parameter in the requestScope
backing bean. So, setting the values into the Session bean and retrieving it back from there
seems to be more reliable.

How can I pass URL parameter value to text field?

Dear Masters,
I have a text field. I want it to have a value based on the URL parameter, for example:
http://myapplication.net:7777/pls/apex/f?p=102:1:::::P1_RTNUM:9448,P1_EMAILADD:email.add.here
I want the value of the text field = P1_EMAILADD after the form was loaded. Also, please have it read-only.
Thanks a lot.
Edited by: user6368519 on Sep 16, 2009 11:39 PM

Thanks Saad,
Can I email you(I would need your email) for any concerns or just create a new thread for you to look?
This is ok now. I'm sorry but I just marked this one as an "answered" one last time.
Thanks for all the help again I appreciate it. ;)
Thanks,
Aaron
[email protected]

How can I pass empty value in URL Parameter

Hi,
I am passing different URL parameters to one page, to filter
the recordset on that page. How can I pass an empty value in the
URL parameter so that the recordset in unfiltered?
The URL parameter is based on one field of the database:
ContentType. So, the link would be to
default.asp?ContentType=Event
and then all records that have the ContentType field in the
DB as Event are displayed. Is it possible to use this system to
pass an empty parameter so that all records are displayed?
Thanks
Ian

?ContentType=All
<% if (ContentType == "All")
Build recordset w/o filtering
ASP is rusty, but those are the basics.
"iandobie" <[email protected]> wrote in
message
news:e8im80$q7m$[email protected]..
> Hi,
> I am passing different URL parameters to one page, to
filter the recordset
> on
> that page. How can I pass an empty value in the URL
parameter so that the
> recordset in unfiltered?
> The URL parameter is based on one field of the database:
ContentType. So,
> the
> link would be to
> default.asp?ContentType=Event
> and then all records that have the ContentType field in
the DB as Event
> are
> displayed. Is it possible to use this system to pass an
empty parameter so
> that
> all records are displayed?
> Thanks
> Ian
>

How can I add a url parameter to choose the right database row to delete using php in Dreamweaver CC

Hi all,
I have just upgraded to Adobe Creative Cloup. Though I find it very good there was one flaw and that was the omision of the database section. I got this sorted but now I find that once I have set up the connection to the database and want to eithger delete or update records there is no 'url parameter' button to do so. Can someone advise we how to get round this.
Seasons Greatings from
David J

The link will look similar to
myPage.php?ID=myVariable

How to catch URL parameter from Portal URL in Web Dynpro iView

Hi All,
I have a web dynpro application running as a portal iView successfully. Now the client wants to make it internationalized with 7 languages. Currently they access the portal - and via role assignment they get to the portal tab with the wd iView. Now they want to send a parameter for the language key with the portal URL. So when they are typing in http://myportal.mydomain.com now they want to type in http://myportal.mydomain.com?sap-locale=de or so. My question is how can I catch this parameter in the WD application when it is running inside a portal iView? Is it at all possible?
I have written a very small application which is trying to catch a URL parameter named PARAM. The code I have written is the default one as below:
String paramValue = WDWebContextAdapter.getWebContextAdapter().getRequestParameter("PARAM");
When I run the application standalone and add the PARAM=something in last of the URL I can catch it. But when I create an iView and while previewing it I add the same PARAM value it is coming as null all the time. Same when I add this iView to a role and show it via role assignment in protal. Please help to let me know how to achieve this. I think if I can read the parameter value from Portal URL in the WD iView - then I can set it as the default locale of the application and then show language specific file to achieve internationalization.
Your urgent help will be highly appreciated.
Warm Regards,
Shubho

Hi Shubhadip
Even if you get the parameters, how do you internationalize your application? Are you not following the standard way as described in the following link. In this case you never need to capture any such parameter. This is done by the WD runtime automatically .
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/f4/d95664da179b4db731e21c2e470b72/frameset.htm">Internationalization of WD projects</a>
You can retrieve application parameters specified at the creation of iview by "adding parameters(with the same name as in iview application parameters) to the default plug of the Component Interface View of the WD application". "onDefaultPlug" method of the interface view controller you get these values as parameters, which you can save in the context node of component controller for later use.This is guaranteed to work.
But again this is not what you want exactly. You want the user to specify the value at runtime. If you have just 7 languages, you can create 7 set of iviews with different application parameter value indicating language key, and assign to 7 different set of roles, each representing one set of users with common language.
I hope you find a solution.
Regards
kk

How to pass mysql query id through url parameter to a detail page

Hi there,
I am a newbie to JSP and I am trying to pass a url parameter to a detail page so that it will query a mysql data query to show the details of that query. How can I write the query on the details page so that it will display the query results on the page. eg select * From data Where = "passed_url parameter_ value". Please i need urgent help on this please.

<Acknowledged>
which should be strongly cautioned against even for "newbies".
</Acknowledged>
Right, but the code you posted will "work" in a very harmful wayNot always, I used normal Statements last year and I had no problems.
Even with pretty capible code brakers trying to cause $h!t with my application.
Just check for invalid datatypes, and for SQL Injections remove stuff like ' or replace with `
But yes PStat... are the better way.

URL parameter to a detail page

Hello,
I a m having trouble with my url parameter which is not fetching the correct record. The code works - and returns a word title and description; but it returns only the top record no matter which link is used. Please help.
1. I have a master page with three url links which are sent to the detail page:
<p><a href="sprydetail.html?word=integrity">integrity</a></p>
<p><a href="sprydetail.html?word=voice">voice</a></p>
<p><a href="sprydetail.html?word=argument">argument</a></p>
The sprydetail.html page looks like this:
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryURLUtils.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
</head>
<body>
<div spry:region="ds1">
<h1>{word}</h1>
</div>
<div spry:region="ds2">
<p>{description}</p>
</div>
</body>
My xml file looks like this:
<tagwords>
<tagword>
<word>Integrity</word>
<description><![CDATA["in·teg·ri·ty [in-teg-ri-tee] Show IPA noun 1. adherence to moral and ethical principles; soundness of moral character; honesty. 2. the state of being whole, entire, or undiminished: to preserve the integrity of the empire. 3. a sound, unimpaired, or perfect condition: the integrity of a ship's hull."]]></description>
</tagword>
<tagword>
<word>Voice</word>
<description><![CDATA["voyss [voyss] Show IPA noun"]]></description>
</tagword>
<tagword>
<word>Argument</word>
<description><![CDATA["arg-u-ment[arg-u-ment] Show IPA noun"]]></description>
</tagword>
</tagwords>

1. I have a master page with three url links which are sent to the detail page:
<p><a href="sprydetail.html?word=integrity">integrity</a></p>
<p><a href="sprydetail.html?word=voice">voice</a></p>
<p><a href="sprydetail.html?word=argument">argument</a></p>
Please remember that the URL variables are case sensitive, ie if the variable that you are looking for is Integrity then the variable cannot be integrity.
The sprydetail.html page looks like this:
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryURLUtils.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
</head>
<body>
<div spry:region="ds1">
<h1>{word}</h1>
</div>
<div spry:region="ds2">
<p>{description}</p>
</div>
</body>
Change the above to
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
</head>
<body>
<div spry:region="ds1">
<h1>{word}</h1>
</div>
<div spry:detailregion="ds1">
<p>{description}</p>
</div>
<script src="SpryAssets/SpryData.js"></script>
<script src="SpryAssets/xpath.js"></script>
<script src="SpryAssets/SpryURLUtils.js"></script>
<script>
var params = Spry.Utils.getLocationParamsAsObject();
var ds1 = new Spry.Data.XMLDataSet("myxml.xml", "tagwords/tagword[word ='"+params.word+"']");
</script>
</body>
</html>
First of all I prefer having the JS at the bottom of the document, not absolutely required. Next I have gone for one dataset showing a region and a detailregion. I have also extracted the URL variable placing this into params, the individual value params.word has been used in the xPath definition.
Gramps

Missing Required Parameter 'from' for event 'open' -- InDesign CS3 Error

Now that I've upgraded to OS 10.6, and I'm getting this weird error message (Missing Required Parameter 'from' for event 'open') when I open CERTAIN InDesign files by double-clicking on the icon. Other files open okay. Everything SEEMS to open okay when I open CS3 and go to FILE and OPEN.
Anyone else having this problem? Any advice?

I was having this problem too and then noticed that the files that would not open had special characters in the name, # or % for example.
I changed the name to exclude these characters and they all opened just fine.
If that doesn't work, it may be, if you use it, Suitcase Fusion. Extensis says that if your computer name is too long or also has special characters in it that it could be a problem in OSX 10.5 and later. Go into System Preferences/Sharing and edit your name to within 20 simple characters.
I hope this helps.
Message was edited by: Dyrian

How to get value of URL parameter

Hi,
If an ABAP Web Dynpro URL looks like this: http://<server>:<port>/sap/bc/webdynpro/sap/zny_test1?sap-client=100&sap-language=EN, how to get value of the URL parameter sap-client at runtime in the application?
Thanks,
Nancy

The framework currently strips all the framework specific params.
Perhaps the will be made available in a future release. Thomas, any comments ?
However, I dont understand the requriement to know the sap-client URL value.
If your code is running, a user has successfully connected to system a therefore he has a session open and this session is associated with exactly 1 client at any point in time.
See SYSTEM VARAIBLE SY-MANDT.
this represents the client in which the users session is running and negates the need to see
sap-client URL value.
regards
Phil.

HTTP Sender - how to read URL Parameter USER id into Mapping

Hi,
My scenario is HTTP - XI - ABAP Proxy.
I wanted to capture USER id of the person who posted(HTTP) into XI(Mapping). How to read/evaluate the value of sap-user from querystring of URL ?
http://HOST:8008/sap/xi/adapter_plain?namespace=http%3A//abc.com/sales_oa&interface=MI_sales_OA&service=DEV_D&party=&agency=&scheme=&QOS=EO&<b>sap-user=SM9999</b>&sap-password=xxxxx&sap-client=001&sap-language=EN
please help.

Mallik,
Try URL Parameters in HTTP sender communication channel.
In the sender communication channel set Adapter Specific Message Attributes. Click on Apply URL Parameters. In Parameter1 put sap-user (U can query any URL parameter by giving its name as in the HTTP URL).
Now in SXMB_MONI, in inbound payload SOAP Header, under Dynamic configuration u can see the value of the user. Query the same in Mapping using Dynamic Configuration using keyName as UrlParamOne.
Regards,
Sudharshan N A
Message was edited by:
Sudharshan Aravamudan

Webdynpro appln Url parameter "sap-wd-client= XML client "

Hi all,
I am a beginner in Webdynpro application development.
I have a query on the usuage of Url parameter "sap-wd-client=XmlClient" in webdynpro application.
When i set the Application parameter property of webdynpro iview in portal as "sap-wd-client=XmlClient", i am getting the content of webdynpro appln in XML format. What is the use of this XML format.
Can we use this webdynpro appln in XML format in any other portal say Weblogic portal and produce an UI in that portal.
Let me know the use of this XML format.
Pls give me some exposure on this.
Thanks & Regards,
Siva

Hi sivakumar,
It is used for supplying data to another kind of client. You can download a trial version of it somewhere on SDN.
Best regards,
Thomas

Missing URL parameter: IterationId

Similar Messages

Maybe you are looking for