Missing USB bracket

This is something I asked support for...
Support
I recently purchased some MSI components from an outlet in Taiwan whilst traveling for business. Amongst these parts was a P31 Neo motherboard. The board itself is very good, however, it did not come with a USB bracket that is listed in the manual.
I know you are probably going to tell me to contact the Taiwan outlet that I bought the board from but this is not practical. Can you let me know where I can get one of these USB brackets from as all I can use is USB 1.0 until I get one. I don't mind if I have to pay for it but it would be very helpful if you could advise me how to get one.
This was their reply:
You can get the bracket here: http://www.morgancomputers.co.uk/shop/products2.asp?CategoryID=142&SubCategoryID=320
Cool, so I bought one and it don't fit. This was my reply...
I purchased the MSI USB bracket (code: 08001035) , it does not work. I notice that the motherboard has a pin missing one end and the bracket does not match this, could it be a different bracket?
Can you please suggest what I might need?
To add to my last mail, I checked the MSI manual and it states a pinout of:
1-VCC
2-VCC
3-USB0-
4-USB1-
5-USB0+
6-USB1+
7-GND
8-GND
9-KEY(NO PIN)
10-SUB0C
And now I have lost interest in trying to get anything from MSI, filling in the form each time drives me round the bend. Thought I'd ask on here, maybe someone knows where I can get the correct bracket as I have already spent £6.99 on something that I will never use.
Thank you
Si

The board's USB connectors are compliant with the Front Panel I/O Connectivity
Design Guide which means it is highly standardized. I am note sure what is up with the bracket you bought but the wiring seems to be messed up somehow. In any case, it must either be really old or of some strange standard.
Your case has a plug for the USB Front Panel connectors, right? Do you have any problems with that?
I have bought different USB brackets in the past that were sometimes quite cheap no-name thingies and I never had any problems using them on MSI boards with standardized connectors. Do you know a local computer ship that sells such brackets so that you can have a look at the plugs before you actually buy something?

Similar Messages

Old USB brackets on my new mainboard?

Hi!
I've just upgraded from MSI K7T266 Pro2 to K9N Neo, but i miss an extra USB-bracket.
So i took one of my old ones that came with the K7T-board. My question is: Am i doing something wrong here?
Beacause, i can't get them to work on my new mainboard.
Someone? Please... Must i BUY new ones... :(
Todde

Thanks anyway for pointing this out! Did not think about that, my idea was that MSI has started to save money and not ship mainboards with USB brackets no more.
Wrote my dealer tonight, let's se what he has to offer...
Thanks again!
Todde

Trying to Print - Receiving "Missing USB Class Driver" Error

Since I upgraded from Tiger to Leopard, I have not been able to print. I have a Lexmark X5470. At first, any application that attempted to print simply crashed. Then, I removed the Lexmark folder from /Library/Printers, and did a custom install of just the Lexmark printer software from my Leopard DVD. Now the applications no longer crash, but I am getting this error:
/usr/libexec/cups/backend/usb failed
Missing USB class driver.
Does anyone know what this is? I have deleted the printer and re-added it, restarted the computer, disconnected the printer, etc...everything I could possibly think of.
Thanks!
(And Lexmark did tell me that they have no plans for making their software for this printer compatible with Leopard, so I need to get it working without their help.)

There are several posts here on the Lexmark x5470. One that mentions your specific problem is here:
http://discussions.apple.com/thread.jspa?messageID=5674001&#5674001
Other have had success using the Lexmark drivers and then disabling or deleting a plugin. There are several threads on this.
Hope this helps.
Message was edited by: John Blanchard1

USB bracket

I'v got a MSI K8N NEO2-FX,nForce3 250Gb,Socket-939 motherboard.
I need some more USB on it.
Can i use the USB bracket that came with my older MSI KT266a-ru motherboard?

i've just read on kt266a's msi mainboard manual that digital bracket is the 1st version wheareas your new mainboard needs 2nd version called: digital bracket2, so i think it's for this reason

Missing USB class driver for Lexmark X7170

I just upgraded to Leopard and everything went fine but the USB connected Lexmark X7170 errors when printing with this message:
/usr/libexec/cups/backend/usb failed
Missing USB class driver
I did reinstall the Lexmark printer app but no luck. The app does run but missing USB driver still. Posted email to Lexmark but no reply.

Have same problem with Lexmark X5490 - in fact I used it OK under Tiger but wasn't ever able to use since upgrading to Leopard last year.

MSI K7N2G-ILSR missing d-bracket

I bought a MSI K7N2G-ILSR Skt A board from ebuyer in the UK. :]
On opening the box, I noted that the D-Bracket2 was missing from the box (but listed on the contents list on the side). :(
I am having no luck getting the component from the company I bought it from, and I then find all the MSI email and phone numbers are for distributors only ! ?(
How do I get the missing part now, as I am missing 2 USB sockets I was counting on when purchasing this board. ?(
Brummieman

I too bought my mobo from ebuyer and it was also missing the D- Bracket. After a number of e-notes I finally got this response from them:-
The brackets never actually shipped out with this motherboard though they should have. We will be getting these brackets in shortly so i will have the brackets forwarded on ASAP.
Regards
Rick
Ebuyer Support
I originally reported this to them on 10th Feb and finally got the reply on 19th Feb, however, I am still waiting for the D-Bracket..

HP Touchsmart 310-1125Y - Missing USB Receiver, how can you get a replacement?

I purchased an HP Touchsmart 310-1125Y all-in-one computer and the USB Receiver is missing. Does HP sell replacement receivers? I tried searching but just found the part number of the mouse. The mouse's part number is 603289-001 and the keyboard is KG-0981.
The mouse/keyboard are fine, just no USB receiver. Anyone have any luck with "generic" receivers if such a thing exist?

Here are the specs for your HP TouchSmart 310-1125y Desktop Computer. According to the specs, this model was introduced for sale around two years ago. The specs also indicate that the USB mouse/keyboard wireless set use a 2.4GHz frequency. Have you checked on the bottom of the mouse??? Many mice have a little "pocket" to store the USB dongle. If the USB dongle is truly missing, HP's Part Surfer lists the mouse as "Part# 588485-001 - HP Mouse - Wireless, Optical (includes USB Receiver & Mouse)".
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Under devices missing usb How do I find it?

In IPhoto under devices missing the one for usb to import from phone. How do I get it back?

USB hubs do not show - only devices so if you have a USB card reader and put a memory card in it and mount it then it will show as a device
LN

Missing USB connectors on K8N SLI Platinum

I recently ordered the K8N SLI Platinum, but when it arrived the board didn't match up with the picture you can see here:
http://www.msicomputer.co.uk/Products.aspx?product_id=703525&cat_id=77
http://www.msicomputer.co.uk/Images/Products/ProductImages/LargeImage/7100Platinum.jpg
The yellow plastic surrounds that support the JUSB1, JUSB2 and JUSB3 USB connector pins on the motherboard are missing. The connectors I'm talking about are the three smaller yellow blocks you can see lined up in a row. This fault seems to make it far too likely that the pins will snap at some point in the future (lack of support), or that the USB cables may be attached incorrectly (no keying). Has anyone else experienced this problem? Can anyone tell me how best to proceed to resolve this issue?

As mentioned, you'd be hard pressed to plug them in the wrong way, but if they are separate, you'd still have to sort them out anyway.
They look purty 'n all but it is nothing to worry about. It's not like there is a lot of movement in your case.
So you're saying that the connectors are just the standard jumper blocks like the pic below?
This does not surprise me, since I am in the PCB industry so I see things like this happen all the time. Not to make excuses or try to minimize it but sometimes, for one reason or another there could be a shortage of parts based on avalability from the part vendor. Perhaps even there might have been a defect in a shipment of connectors.
It really is nothing to be concerned about, I'd be bummed, but not enough to go through the hassle of returning the board based on that.
As for aicjofs comment about building boards years ago and it being a new thing, is true, I still see the old style on other boards still.

Missing sound + missing USB power (sometimes) from Thunderbolt Display when waking from sleep

Hi
Two problems - one of which is driving med crazy!!
Have the latest updates, and the display is connected to a MBA (mid 2011).
The two are almost alwayes connected, and every time I wake the MBA from sleep, the Thunderbold Display does not "support usb sound" - the sound options are only MBA and headphones. Only a restart will give me the option to use Thunderbolt as sound output: WHAT TO DO!?!?!!
Sometimes when waking from sleep the USB in the Display seems to be "off" - the will not charge my devices (iPhone, iPad etc.). Only reboot seems to fix this... I have seen this in other discussions but not found a permanent solution - any thoughts?

Same here but reinstalling OSX is a bit drastic. I solved the problem by deleting a preference.
Go to Macintosh HD then System then Library then Preference panes then Sound.prefPane
Delete Sound.prefPane (you need to type your password).
Logout or restart.
This has happend twice this week so WHY is this suddenly occurring?
Hi,
I found this solution in the forum, but I can't find it again. I had cut and pasted it into a text file, because it solved my problem. I just don't want to take any credit for it. It did work for me. I had no problems for 3-4 weeks with the monitor, I have had the sound problem since last Friday. Very frustrating.
BSGINC

Missing USB ports and no audio in 64-bit but OK in 32-bit

I recently lost audio output from my MacBook Pro. As usual, I had been fiddling with several things at once so don't know how or if I triggered the issue. I had been dealing with Airtunes problems but assumed network issues. I had also been trying to mount NTFS volumes with MacFuse and NTFS-3G but had compatibility issues with Lion.
Looking in the Sound control panel, Audio MIDI setup and System Profiler, no internal output option was available. I did have SoundFlower and Digidesign options.
While troubleshooting this, I noticed that only the frontmost of the three USB ports on the MBP was working.
I booted into Snow Leopard from an external drive and everything was working fine.
Researching the issue, a reference to 32 vs 64 bit got me thinking, so I booted into Lion in 32-bit mode and everything worked again. Back into 64-bit, no audio, only one USB again.
I've removed the SoundFlower and Digidesign stuff (incompatible with Lion anyway) and the NTFS stuff without effect.
Can anyone advise me where to look next? I've browsed the logs but don't really know what I'm looking for.
Any help would be much appreciated.

I've got a temporary fix , but it sounds like you need a full recovery . After the HP/Compaq Screen flashes and disappears at startup , start pressing F8 like a boss (4 or 5 times) , you'll see a screen pop up with many options on it , near the bottom is one that says "disable driver signature requirement" or something similar . Arrow down and select that one , don't think it works after reboot , but like I said , it's just a temporary fix .
hope that helped
If it did hit me with some Kudos , I need all the help i can get .

Missing usb sync cable

Hi, my neighbor upgraded to the Sprint Evo and I bought her Palm Treo 700wx for Sprint. Her USB sync cable was damaged or something; she didn't have it. Do I need that to sync with my work computer, or can I sync "wirelessly" using the exchange server ?
Sorry if this is dumb; i am totally new to smartphones
Post relates to: Treo 700wx (Sprint)

dschrade wrote:
Do I need that to sync with my work computer, or can I sync "wirelessly" using the exchange server ?
Your email, contacts, calendar, and tasks can sync over the air with Exchange. Pictures, music, etc., do not. Did the 700wx have Bluetooth? That might provide an alternate way to sync those local items.

Missing USB driver / dongle for HP Wireless Elite Desktop v2

Hello there,
I recently lost my usb driver / dongle for my keyboard and mouse (HP Wireless Elite Desktop V2). I am unable to use both keyboard and mouse.
What is the solution for this problem. Can you send me a replacement usb dongle / driver. I sincerely appreciate your help.
Thanks and regards,
Samy Pal

Samy,
The Elite Desktop v2 uses Link 5 technology but my understanding is there is no individual Dongles available.
You would have to buy a whole new Mouse, etc, etc. to get a new Dongle.
You can always contact HP Support directly for your area/country and ask them yourself.
HP tech support/ customer service phone number to call
This forum is a volunteer service and not a direct portal to Support.

Missing USB drivers

I recently wiped and installed Windows 7-64bit (using a normal win7 disk) on a Toshiba Satellite S855D (http://www.toshiba.ca/web/product.grp?section=1&group=1&product=12805&part=13984)
I was able (mostly through trial and error) to find the right ethernet and wifi drivers here:http://support.toshiba.com/drivers
I have managed to get one of the three USB ports working (the USB 2.0 one) but I cannot get either of the two USB 3.0 ports to work at all (they supply power, but nothing I plug into them will communicate with the computer).
I tried using windows update to find the right drivers (device manager -> other devices -> Update Driver Software...) for everything listed in that section of the Device Manager, but it failed for all 3 items (SM Bus Controller, Universal Serial Bus Controller, USB2.0-CRW).
Can someone please point me towards the correct drivers, or tell me what I need to do?
Thanks

Hi !! Sense no one is answering you, I will give it a shot. First I have some questions. Why did you think you needed to install Windows 7-64 bit with a Window 7 disk?? If you wanted a fresh W7 install, you have those features avaible with Toshiba recovery. I should say, you had those features available. I doubt if they are still availabe. You can continue to fight this or you can go here and get the recovery media that you should have used in the first place.
Dokie!
Ps I just really have a hard time trying to understand why people do these things when Windows and Toshiba has made it so easy for you to install a fresh copy of your OS
https://support.toshiba.com/repair
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Missing USB cable for MuVo S

I was wondering if there was any way to obtain a new USB cable for the MuVo Slim without purchasing a whole new MP3 player (I lost mine a while back). It's frustrating not having it as I can no longer upload new audio files to the MP3 Player, nor can I recharge the battery (only charges when plugged into PC). After discovering that it was a USB 2.0 cable I found that one of the connectors was smaller than that of any other USB 2.0 device I could find, so I can't even use the cable for another device.
Anyone know where to buy one (either internet/UK shop) ?

This should be what you're looking for.
http://uk.europe.creative.com/shop/product.asp?prod=470
Jason

Missing USB bracket

Similar Messages

Maybe you are looking for