Missing User Defined Characteristic in KE4A

While creating condition table in CO-PA the user defined characteristic are missing in the field catalog. How can these user defined fields be displayed.
Thx
Ar

Hi,
Goto Tcode KEA0
Click on 'Data Structure' tab and click 'Display'. Check whether ur Char is available. Else recreate it
Go to Environment tab and activate the Cross client and Client specific part by clicking the 'Activate' icon
Regards,
Sridevi
Pls. assign points, if useful

Similar Messages

COPA User defined Characteristic - Region

Hello - I have a requirement to capture Region from Ship to party, so I am trying to create a 'user defined' characteristic . The underlying reason to have chek table is I want to be able to put some values for this characteristic in a cycle to do cost assessment based on certain values.
I have selected ' with reference to existing values' because I want system to generate check table etc. So I am referencing to 'RIGIO' data element. I am getting following message ' Data element REGIO is already used for REGIO' even if I create characteristic with warnings, I am not able add to operating concern.
Any suggestions
Thanks
Chris.

Hi
After you create and Activate the Char in KEA5,
1. Go to KEA0
2. Click on Display / Change data structure
3. Click on Change view... It will show list of chars on the right hand side...
4. Push the user defined char from Right to Left side..
5. Save And Activae (Click on the Candle icon)
6. Press back button and Confirm the pop up to regenerate op concern
7. Include it in transport request from KE3I...
br, Ajay M

Missing user-defined fields (project definition) in project inform. system

Dear PS friends,
I have extended the CI_PROJ structure with some user-defined fields.
I have started report RCNCT001 (to analyze these new fields in the project information system). The include RCNPROJR was generated and contains the new fields (table XXL_DATA). Include RCNSOM00 was generated too. This is described in note 43493.
But Iu2019m still missing the new user-defined fields in the dynamic selection of reports (e.g. CN40).
What else I have to do? We use SAP_APPL : SAPKH60009
Thanks in advance for any suggestions!

have you used user defined field or custom field via exit CNEX......
User defined fields are activated by configuration using field key
If you added custom fields then check out OSS note 188663 on how to create a CUS view for dynamic selection.

Problem after uploading user defined characterstic schema in product catalo

Hi friends,
We were using SRM 5.0 and CCM 2.0, we were uploaded Master catalog through .CSV file, Product catalog schema through .XML and user defined characteristic schema through .XML file separately. System given message catalog updated successfully. But when I observed in product catalog user defined characteristics are removed from the product catalog the content of these fields is also wiped out from the items. Once the catalog was in this state, I mapped it to the Master Catalog and all the user defined characteristics show up in error. What could be the cause?? can any body Help (Urgent)
Thanks in advance
Srinivas

Hi
Please go through the following SAP OSS Note / link ->
Note 1024002 - Error introduced by CCM SP07
Re: Unable to Edit the Charateristic?
Do let me know.
Regards
- Atul

COPA user-defined charact. w. own value maint. with existing check-table

Dear Experts,
I need to create a user-defined characteristic with own value maintenance with the pecularity that it needs to refer to the same check table as another user-defined characteristic with own value maintenance.
Could anybody explain me how I can do that?
Thanks in advance for your kind support.
Best Regards,
Eric

Hi Eric,
Generally when you are creating user defined charachteristic with own value maintainance check table is created by the system. So you requirement is not possible to achieve. As a workaounr you can create two char as you want and then copy the content of the first check table to the second one. This will have the same impact as what you have described.
Best Regards,
Abhisek Patnaik

COPA User Defined Characteristics

Hi Friends,
I need to add a user defined characteristic in COPA for Internal Order Types
Can any body guide me please if you have any guide with screen shots, I think i need to add characteristics with user defined WW>then add in Operating Concern>add condition types and then in KEDR table look up AUFK and selection to VIAUFKST.
Can any confirm the above or guide it in the right manner if any config book is available also that would be great.

Dear Suraj,
I have maintained the
a .user defined characteristic for Order Type
b. Added in the Operating Concern and Regenerated it
c. Added Derivation rule thru table look up for Order Type
Should i do any further steps (In CO-PA) for a CO-PA document related to Internal Orders to be generated thru billing cycle or i m fine with the steps i have done.
Pls let me know
Thanks a lot for your help
Ravi.

Some DB objects like User-defined datatypes being missed out?

Dear all.
I create an Oracle model for a captured SQL Server model and then right click -> click on 'Generate' to create the DB creation script.
(1) But few objects like user-defined datatypes are missed out in the script.
(2) Also, a simple stored proc as defined below missed out:
CREATE PROCEDURE [SalesLT].[SayHi]
AS
SELECT 'Hi I am a job scheduler'
GO
Rgds, Abhi

Hello,
An OracleDI Dataserver connection to an RDBMS is, most of the time, defined with a single set of parameters: a user account name, a password and a URL.
OracleDI may need to access numerous tables on the RDBMS which may not all be stored in the same database schema, catalog, library, ...and for which access privileges may not be identical.
For this reason, it is necessary to ensure that the RDBMS user account has sufficient access privileges for these schema, catalog, librairies ...
The user account should have at least read/right access permission for any OracleDI Physical Schema referenced for the concerned Dataserver (depending on the project within which it is used, a Physical Schema may store both source and/or target tables).
Moreover, for project requirements, it may be necessary to use/create/drop certain RDBMS
components such as stored procedures, views, temporary tables, system tables ...
For this reason, make sure the user account referenced in the dataserver connection parameters is attributed sufficient privileges to any object it may manipulate with OracleDI.
2nd point: you can use any logical name for the data server Name.

BAPI_DOCUMENT_CHANGE2 - Characteristic Number of User-Defined Data Type

We are using classifications in the DMS system (it is the same classification system as the sales order and a few other transaction types). We also have defined our own characteristic data types. If we manually go into CV01n and enter in values into the user defined characteristics everything works fine. However, if I specify them in BAPI_DOCUMENT_CHANGE2 the values are not created/stored. I get a null return on the return parameter so there isn't a warning nor is there an error.
Is there another way to set these values as it doesn't look like it will work with BAPI_DOCUMENT_CHANGE2?
Regards,
Davis

We are using classifications in the DMS system (it is the same classification system as the sales order and a few other transaction types). We also have defined our own characteristic data types. If we manually go into CV01n and enter in values into the user defined characteristics everything works fine. However, if I specify them in BAPI_DOCUMENT_CHANGE2 the values are not created/stored. I get a null return on the return parameter so there isn't a warning nor is there an error.
Is there another way to set these values as it doesn't look like it will work with BAPI_DOCUMENT_CHANGE2?
Regards,
Davis

User defined Catalog type3 - Valuation Code field is missing

Hi Quality Experts,
SAP Version : SAP ECC 6.0
I have craeted the user defined catalog type "S" coping the system defined catalog type "3".
In sytem defined catalog type "3", in transaction code QS51, there are 15 fields.
Where as user defined catalog type "S", for the same transaction code QS51,
7 fields are hidden including the "Valuation Code" field.
Hence the selection set can not be created.
The details are given below.
S.No     System defined Catalog Type "3".     User defined Catalog Type "S".     Remarks
1     Code Grouop     Code Grouop     OK
2     Code                      Code                     OK
3     Short Text for Code     Short Text for Code     OK
4     Long Text for Code     Long Text for Code     OK
5     Valuation Code     MISSING                    THIS FIELD IS MISSING
6     Quality Score     MISSING                    THIS FIELD IS MISSING
7     Posting Propasal UD     MISSING                     THIS FIELD IS MISSING
8     Long Term Char.     MISSING                      THIS FIELD IS MISSING
9     Stock Screen Backgr. MISSING        THIS FIELD IS MISSING
10     Follow up action     MISSING                  THIS FIELD IS MISSING
11     Short Text      MISSING                      THIS FIELD IS MISSING
12     Changed By     Changed By       OK
13     Changed On     Changed On      OK
14     Created By     Created By     OK
15     Created On     Created On     OK
Please do the needful.
With Best Regards,
Raghu Sharma

Hi Anton,
Thanks for your prompt reply.
Can u please guide to create a user defined catalog of type 3 ?
While creating the selection Set, I need all fields.
With Best Regards,
Raghu Sharma.

User defined Catalog type u0093Su0094 - Valuation code field missing

Hi Quality Experts,
I have created a user defined catalog type in customization coping the catalog type 3.
This is required for authorization purposes.
Transaction Code : QS51.
For system defined catalog type 3, in QS51 all fields are visible.
Hence selection set can be created.
For user defined catalog type S which is a copy of 3,
for the same transaction code QS51 many field are hidden.
Hence selection set can not be created.
15 Columns are existing.
S.No     System defined Catalog Type "3".     User defined Catalog Type "S".     Remarks
1     Code Grouop     Code Grouop     OK
2     Code                      Code                      OK
3     Short Text for Code     Short Text for Code     OK
4     Long Text for Code     Long Text for Code     OK
5     Valuation Code     MISSING                     THIS FIELD IS MISSING
6     Quality Score     MISSING                     THIS FIELD IS MISSING
7     Posting Propasal UD     MISSING                     THIS FIELD IS MISSING
8     Long Term Char.     MISSING                     THIS FIELD IS MISSING
9     Stock Screen
                Backgr.                    MISSING                     THIS FIELD IS MISSING
10     Follow up action     MISSING                      THIS FIELD IS MISSING
11     Short Text      MISSING                     THIS FIELD IS MISSING
12     Changed By     Changed By     OK
13     Changed On     Changed On     OK
14     Created By     Created By     OK
15     Created On     Created On     OK
===========================================================
Total 7 fields are missing.
SAP Version : SAP ECC 6.0
Please guide.
With Best Regards,
Raghu Sharma.

Hi
when you have created new Catalog type by copying 3, did you check whether Selected Sets is flagged in the configuration?
regards
Srinivas

User Defined Function Missing In EF 6?

I'm using Entity Framework 6 and I have imported several user-defined functions like the one shown below, but it doesn't
appear when I try to select the function in intellisense and the model doesn't recognize this function as a method on the EF context. How do I call this function in EF 6?
<Function Name="getCycleDate" Aggregate="false" BuiltIn="false" NiladicFunction="false" IsComposable="true" ParameterTypeSemantics="AllowImplicitConversion" Schema="dbo" ReturnType="date" />
MCSD .NET developer in Dallas, Texas

Hello DallasSteve,
>> I have imported several user-defined functions like the one shown below,
What is your UDF? If it is a TVF, starting from EF5, it is supported already:
https://msdn.microsoft.com/en-us/data/hh859577.aspx
However, it is a scalar function, unfortunately, as far as I know, even entity framework 6 doesn't suport generating calls for scalar functions by default. The workaround is to write a custom method like this inside your DbContext class, for example, there
is scalar function as:
CREATE FUNCTION [dbo].[Function20150410]
@param1 int,
@param2 int
RETURNS INT
AS
BEGIN
RETURN @param1 + @param2
END
When we imported it to the model, it would generate code in SSDL as:
<Function Name="Function20150410" Aggregate="false" BuiltIn="false" NiladicFunction="false" IsComposable="true" ParameterTypeSemantics="AllowImplicitConversion" Schema="dbo" ReturnType="int">
<Parameter Name="param1" Type="int" Mode="In" />
<Parameter Name="param2" Type="int" Mode="In" />
</Function>
While, it will not generate a call method as a store produce, for a workaround, we could write a custom function as:
[DbFunction("DFDBModel.Store", "Function20150410")]
public ObjectResult<int> GetContentByIdAndCul(int id, int culture)
var objectContext = ((IObjectContextAdapter)this).ObjectContext;
var parameters = new List<ObjectParameter>();
parameters.Add(new ObjectParameter("Id", id));
parameters.Add(new ObjectParameter("Culture", culture));
return objectContext.CreateQuery<int>("DFDBModel.Store.Function20150410(@Id, @Culture)", parameters.ToArray()).Execute(MergeOption.NoTracking);
I suggest that you write this custom method a separate cs file since if we update the model, the original context call would be reset.
Calling it as:
using (DFDBEntities db=new DFDBEntities())
var result = db.GetContentByIdAndCul(1, 1).FirstOrDefault();
}s
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

User defined rule for missing triples

Hi,
i would like to know if there is a way to define a user defined rule for triples that are not contained in a model. With curly brace syntax it could be something like this:
INSERT INTO mdsys.semr_validation_rb VALUES(
'test_rule',
'{?s ?p ?o. OPTIONAL{?s rdf:type ?t}}',
't is null',
'(?s <hasType> "false")',
null);
Unfortunately this is not working. Has anybody a suggestion to solve this problem with user defined rules?

Hi,
This is related to the following post.
built-in primitives(noValue,remove) for user defined rules
Note that there is something you need to pay a bit attention to.
Say your original graph contains
:John :fatherOf :Mary
but not any type classification for :John (i.e. no match for {:John rdf:type ?t})
Assume you add the following triple according to the rule you described
(:John <hasType> "false")
Now, what happens if :John is classified as a :Person (or :Parent, :Father),
do you want to withdraw* :John <hasType> "false"?
Thanks,
Zhe

Getting error while using user-defined function in transform activity

Hi
I designed one user-defined function to add 2 nos following the
link:http://docs.oracle.com/cd/E16764_01/integration.1111/e10224/bp_xslt_mpr.htm .
Under this i followed the portion creating user-defined function.
After deploying,i'm getting an error stating:"<summary>
An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc("xsl/Transformation_1.xsl", $inputVariable.payload).
</summary>
<detail>
XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc("xsl/Transformation_1.xsl", $inputVariable.payload).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: oramds:/deployed-composites/PO/HelloWorld_rev1.0/xsl/Transformation_1.xsl<Line 6, Column 104>: XML-22045: (Error) Extension function error: Class not found '
Missing class: addition.add
can anybody help me in this regard
Thanks
Avinash

Did you copy the jar file of your java classes to MIDDLEWARE_Home/user_projects/domains/soa_domain/lib?
http://georgie-soablog.blogspot.com/2010/06/soasuite-11g-implement-user-defined.html
hope this helps

How to use user-defined packages in JAX-RPC web service

I am trying to use Object of my class located in my package in jax-rpc webservice,the code is
package supercomputer;
import Hello.*;
public class SuperImpl implements SuperIF
public String sendParam(String data)
Temp ob=new Temp();
int i=ob.get1(10000);
return data+"returned by supercomputer";
Temp is located in Hello package,I have jar the Hello package as Hello.jar and has set its classpath in targets.xml of Ant tool.
The code compiles well and service is deployed successfully,but when i try to call the service from the client its gives me following error.
[echo] Running the supercomputer.SuperClient program....
[java] java.rmi.ServerException: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:357)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:228)
[java] at supercomputer.SuperIF_Stub.sendParam(SuperIF_Stub.java:60)
[java] at supercomputer.SuperClient.main(Unknown Source)
I dont know if it deploys why it gives error on client side.
Please tell how to use user-defined packages and class in jax-rpc service code ,i am not talking about passing user-defined parameters i am just talking about making objects of user defined classes in jax-rpc service.I think there is some problem in classpath.
Please guide me in doing that.
Thanks,
Farrukh

Farrukh,
I don't know if your error is about a missing class from your custom package, ... what track did you followed to say that?
To use your package in the implementation of you web service, you should only follow the rules of making a web application: put your package jar in your \lib directory inside WEB-INF/ or your package classes unjared in classes (also in WEB-INF/).
As I already said, I have doubts that your error should be originated from a missing class from your package, but:
-try to see the logs (errors?) when you deploy your web service that could give a hint about the problem.
-try to see if you can access your endpoint through your browser to see if there is a online status
-display your config/WSDL file, and the steps you did to build your web service.
regards,
Pedro Salazar.

Java classpath error while crawling sample user defined datasource (SampleA

Hi All,
I am trying to run the sample crawler agent provided by ultra search "SampleAgent.java". For this
I have created and configured the user defined datasource type and the user defined data source (for the NEWS TABLE) as per the readme file of the Sample Crawler agent.
I have also created a schedule for this user defined type.
However, while executing the schedule I am getting the following error:
WKG-30116: Can not find agent class "SampleAgent" from the java class path
Please let me know the reason for the error. Am I right in creating and executing a schedule for user defined data source? (the doucmentation never says that, for user defined datasource, I need to create a schedule and execute it!!)
Also, after going through some of the postings in this discussion forum I understood that I need to check my java classpath from the WK$CRAWLER_DEFAULT_CONFIG table.
In this table my the value for
CC_JAVA_EXEC_PATH is "C:\oracle\ora92\jdk\bin\java.exe -ms16m -mx256m"
and
CC_JAVA_CLASS_PATH is
"-classpath
C:\oracle\ora92\jdbc\lib\classes12.zip;
C:\oracle\ora92\jdbc\lib\nls_charset12.zip;
C:\oracle\ora92/ultrasearch/lib/ultrasearch.jar;
C:\oracle\ora92/ultrasearch/lib/ultrasearch_db.jar;
C:\oracle\ora92/lib/mail.jar;
C:\oracle\ora92/lib/activation.jar;
C:\oracle\ora92/ultrasearch/lib/jgl3.1.0.jar;
C:\oracle\ora92/lib/xmlparserv2.jar;
C:\oracle\ora92/lib/xschema.jar;
C:\oracle\ora92/ultrasearch/bin;
C:\oracle\ora92/ultrasearch/lib/agent/"
Do I need to change any of these values? If so, what changes should I make and how should I make those changes?
NOTE THAT I AM USING THE DATABASE VERSION OF ULTRASEARCH.
Thanks in advance,
Amit Sangle

Hi All,
I would appreciate any help that I get regarding this post.
If anyone has run the Sample crawler Agent please let me know the steps needed to make it work. I have followed the steps mentioned in the readme file here:
http://otn.oracle.com/docs/products/ultrasearch/doc_library/ultrasearch9_2/sample_agent_readme.htm
Are there any other configurations that I need to do? Am I missing something? Please let me know.
Thanks and Regards,
Amit Sangle

Missing User Defined Characteristic in KE4A

Similar Messages

Maybe you are looking for