Missing values in list box in SM30 - interval defined for domain

Hi Experts,
I'm facing the following problem:
Table maintenence view has been generated for a z-data table via transaction SE11. For one field list box has been set and even though the domain (SO_ESCAPE; standard) behind the field has (fixed) values they are not displayed (I cannot see them in the dropdown list) in trx SM30 when trying to maintain it .
Important is that on "Value Range" tab of the domain we can see that interval is defined (satandard).
In order to test this thing we copied the domain, assigned to a z-data ttpe, z-field, etc. If we remove the interval of the domain we can see the values in the list box in trx SM30.
Is this standard (=normal behaviour of the system)? Can we display the values somehow for the satndard domain (with interval)?
remark:
Removing the lsit box setting we can see values (including the interval) using F4 in trx SM30.
Thanks in advance,
Csaba
Edited by: Csaba Szommer on Jun 18, 2010 8:03 AM

Similar Messages

How to hold the value in List box.

Hi All,
On my screen painter Screen I am displaying the Sold to party and ship to party with thier address.
I am also displaying the Shipping condition based on ship to party. To display the shipping condition i am using list box. Once the user enter the sold to party automatically all the field is going to populate in their respective fields. I am facing the problem that, The list box getting populated with shipping condition but once you choose the shipping condition and hit the enter the list box getting refreshed. I am using this code in PAI event. And I can Only use this in PAI.
The Function i am using for list box is CALL FUNCTION 'VRM_SET_VALUES'.
Pls suggest me how to hold the value in List box.
Thanks,
Rakesh

Hi,
Now i am using in PBO.
the code below in in PBO.It is still not holding the value.
      if list[] is initial.
      perform SHP_COND.
      endif.
form SHP_COND .
*DATA: SHOP(80).
    clear : GT_VSBED, list.
    refresh : GT_VSBED, list.
     select vsbed
       from knvv AS K
       into table GT_VSBED
      where Kvkorg = vbak-vkorg "Kkunnr = GV_STPH
      and K~vtweg = vbak-vtweg
      and K~spart = vbak-spart.
    select VSBED vtext
      from TVSBT
    into table list
    for all entries in GT_VSBED
    where spras = sy-langu
    and vsbed = GT_VSBED-VSBED.
*break-point.
NAME = 'SHP_CON'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
    id                    = NAME
    values                = LIST[]
EXCEPTIONS
   ID_ILLEGAL_NAME       = 1
   OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " SHP_COND
Thanks,
Rakesh

How to populate values in List Box in Adobe form

Hi,
How to populate values in List box in adobe forms?
Thanks
RB

if you want to display a fixed values in the dropdown you can use list box ui and can specify values there
or if u want to display values from the context node of the webdynpro
1. Drag and drop a Value Help Drop-down List element from the Web Dynpro Library tab to the Body Pages pane.
2. Drag and drop your node from the Data View tab onto it. This action binds the layout element to the corresponding node.
with regards
shanto aloor

How to capture the multiple value in list box

Hi forums,
       How to select the multiple values in list box and how to catch that values in OnInputProcessing.
Regards,
Ravi.

Hi,
A possible method is:
Get all fields of the form
    CALL METHOD request->get_form_fields
      CHANGING
        fields = table_fields.
loop over the fields
    LOOP AT table_fields INTO wa_fields.
test the name of the field
      CASE wa_fields-name.
        WHEN 'test'.
retrieve the value of the field
          test = wa_fields-value.
endcase
endloop.
Eddy

Getting values from list box

i am populating a list box with Id's and names from a database and im trying to get the values from the list box depending what the user chooses, i.e if they choose the first choice in the list box the value i want to put in a variable is 1, etc
here is the code for the list box, please help
<select name="lstFilm" size="1">
          <%while (result4.next())
               {%>
<option value="<%result4.getInt(1);%>">
<%out.println(result4.getString(2));%>
</option>
               <%}%>
</select>

String[] lstFilm = request.getParameterValues("lstFilm");
Of course, it'll only return selected values. It'll be whatever the option values are.

SetSelectedValue for multiple values in List Box

Hi,
I want to set the selectedValue for multiple values in the List Box. If i use setSelectedValue for all the values, it just highlights the last one.
Can anyone tell me how do i highlight multiple values in the List Box?
Scenario:
I have one screen where the List Box and "Go" button is placed. When i select multiple values in the list box and hit "Go" it should display what i have selected in the List Box.
Note: List Box is generated dynamically.
Thanks,
Naresh V

setSelectedValue as the name indicates will set one value and in your case since you are using it multiple times it would pick the last value.
When the user selects multiple values from the list box and clicks on Go you can capture those values in the controller for processing. What are you trying to achieve by resetting all the selected values on the same listbox ?

How to fill the values in List Box?

Hi Experts,
Can anyone explain me how to fill the values in the List Box such that the value should be from the table?
For Example : Fill the EmpID from table T1 into the ListBox?
Thanks in Advance,
Regards,
Raghu

hi,
and u doing it through report means from se38 than here is code...
DATA : BEGIN OF itab OCCURS 0,
        matnr LIKE mara-matnr,
       END OF itab.
DATA : ok_code LIKE sy-ucomm.
CALL SCREEN 0200.
*&      Module STATUS_0200 OUTPUT
      text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'Z200'.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
      text
MODULE user_command_0200 INPUT.
CASE ok_code.
    WHEN 'BACK' OR 'UP' OR 'CANC'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Module mat_val INPUT
      text
MODULE mat_val INPUT.
SELECT matnr FROM mara INTO CORRESPONDING FIELDS OF TABLE itab
    WHERE matnr BETWEEN '000000000000000101' AND '000000000000000109'.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield               = 'MATNR'
       VALUE_ORG              = 'S'
      tables
        value_tab              = itab
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDMODULE.                 " mat_val INPUT
<b>And this is flow logic..</b>
PROCESS BEFORE OUTPUT.
MODULE status_0200.
PROCESS AFTER INPUT.
MODULE user_command_0200.
PROCESS ON VALUE-REQUEST.
FIELD itab-matnr MODULE mat_val.

How to show value in list box on screen.

Hey,
I'm trying to write a little program to select a value from a listbox on a screen...
Filling the listbox, no problem. But showing the value on screen, and using the selected value isn't working...
So when i select a value, directly after the listbox 'closes', the selected value disappears...
I read already different threads regarding this topic, but i don't see a solution :(.
Below you find the code. Anyone sees where the problem is?
Screen number = 300.
PROCESS BEFORE OUTPUT.
MODULE status_0300.
Module init_dropdown_box.
PROCESS AFTER INPUT.
MODULE user_command_0300.
REPORT ztesttom2                     .
TABLES: zbadgelinks.
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
data: name type vrm_id.
DATA ok_code LIKE sy-ucomm.
DATA save_ok LIKE sy-ucomm.
DATA init.
DATA it_badgelinks LIKE zbadgelinks OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
SELECT * FROM zbadgelinks INTO TABLE it_badgelinks.
CALL SCREEN 300.
*&      Module status_0300 OUTPUT
*       text
module status_0300 output.
SET PF-STATUS 'ST_0300'.
SET TITLEBAR 'TB_0300'.
endmodule.                 " status_0300 OUTPUT
MODULE init_dropdown_box output.
IF init is initial.
    name = 'LB_SEL_PC'.
    loop at it_badgelinks.
      values-text = it_badgelinks-description.
      values-key = it_badgelinks-id.
      append values.
    endloop.
    CALL FUNCTION 'VRM_SET_VALUES'
         EXPORTING
              id              = name
              values          = values[]
         EXCEPTIONS
              id_illegal_name = 1
              OTHERS          = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
endif.
init = 'X'.
ENDMODULE.
*&      Module user_command_0300 INPUT
*       text
module user_command_0300 input.
CASE OK_CODE.
    WHEN 'BACK'. LEAVE TO SCREEN 0.
    WHEN 'EXIT'. LEAVE TO SCREEN 0.
    WHEN 'CANC'. LEAVE TO SCREEN 0.
    WHEN 'CB_CANCEL'. leave to screen 0.
    WHEN 'CB_OK'.
      READ TABLE it_badgelinks WITh KEY ID = it_badgelinks-id.
      IF SY-SUBRC = 0.
        MESSAGE I398(00) WITH 'ID:          ' it_badgelinks-id
                              'Description: ' it_badgelinks-description.
      ENDIF.
    WHEN 'SEL_PC'.
      CALL FUNCTION 'VRM_GET_VALUES'
        EXPORTING
          id                 = name
        IMPORTING
          VALUES             = values[]
        EXCEPTIONS
          ID_NOT_FOUND       = 1
          OTHERS             = 2
      IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
ENDCASE.
endmodule.                 " user_command_0300 INPUT
Thanks in advance,
Kind Regards,
Tom

Hi,
Please check the below modified code of yours.
Now the value is retained in the list box.
REPORT ztest_cert.
TABLES: t511t.
TYPE-POOLS vrm.
DATA: lb_sel_pc(80).
DATA values TYPE vrm_values WITH HEADER LINE.
DATA: name TYPE vrm_id.
DATA ok_code LIKE sy-ucomm.
DATA save_ok LIKE sy-ucomm.
DATA init.
DATA it_t511t LIKE t511t OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
SELECT * FROM t511t INTO TABLE it_t511t WHERE sprsl = 'EN'.
CALL SCREEN 300.
*&      Module status_0300 OUTPUT
      text
MODULE status_0300 OUTPUT.
SET PF-STATUS 'ST_0300'.
SET TITLEBAR 'TB_0300'.
ENDMODULE.                 " status_0300 OUTPUT
MODULE init_dropdown_box OUTPUT
MODULE init_dropdown_box OUTPUT.
IF init IS INITIAL.
    name = 'LB_SEL_PC'.
    LOOP AT it_t511t.
      values-text = it_t511t-kotxt.
      values-key = it_t511t-konst.
      APPEND values.
    ENDLOOP.
    CALL FUNCTION 'VRM_SET_VALUES'
      EXPORTING
        id              = name
        values          = values[]
      EXCEPTIONS
        id_illegal_name = 1
        OTHERS          = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ELSEIF init = 'X'.
<b> lb_sel_pc = values-text.</b>
ENDIF.
init = 'X'.
ENDMODULE.                    "init_dropdown_box OUTPUT
*&      Module user_command_0300 INPUT
      text
MODULE user_command_0300 INPUT.
data: l_code like values-key.
CASE ok_code.
    WHEN 'BACK'. LEAVE TO SCREEN 0.
    WHEN 'EXIT'. LEAVE TO SCREEN 0.
    WHEN 'CANC'. LEAVE TO SCREEN 0.
    WHEN 'CB_CANCEL'. LEAVE TO SCREEN 0.
    WHEN 'CB_OK'.
      clear: it_t511t.
     lb_sel_pc = l_code.
      READ TABLE it_t511t WITH KEY konst = lb_sel_pc.
      IF sy-subrc = 0.
        CLEAR values.
        values-key = it_t511t-konst.
        values-text = it_t511t-kotxt.
        MESSAGE i398(00) WITH 'ID:          ' it_t511t-konst
                              'Description: ' it_t511t-kotxt.
      ENDIF.
    WHEN 'SEL_PC'.
      CALL FUNCTION 'VRM_GET_VALUES'
        EXPORTING
          id                 = name
       IMPORTING
         VALUES             = values[]
        EXCEPTIONS
          id_not_found       = 1
          OTHERS             = 2
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
<b>        l_code = lb_sel_pc.
        READ TABLE it_t511t WITH KEY konst = lb_sel_pc.
        CLEAR values.
        values-key = it_t511t-konst.
        values-text = it_t511t-kotxt</b>.
      ENDIF.
ENDCASE.
ENDMODULE.                 " user_command_0300 INPUT
Thanks & Regards
Praba

Default value in list box

hi,
i need to know how to set default value for a list box in selection screen.

Hi
check this code
at selection-screen output.
name = 'P_DATE'.
value-key = '1'.
value-text = 'Today'.
append value to list.
value-key = '2'.
value-text = 'Last 7 days'.
append value to list.
value-key = '3'.
value-text = 'Last 30 days'.
append value to list.
value-key = '4'.
value-text = 'Last 90 days'.
append value to list.
value-key = '5'.
value-text = 'Last year'.
append value to list.
Call the ''VRM_SET_VALUES' to display the values in Listbox
call function 'VRM_SET_VALUES'
    exporting
      id     = name
      values = list.
at selection-screen.
if sy-ucomm = 'CLI1'.
    sscrfields-ucomm = 'ONLI'(001).
endif.
if p_date = '1'.
    p_date11 = sy-datum .
elseif p_date = '2'.
    p_date11 = ( sy-datum - 7 ).
elseif p_date = '3'.
    p_date11 = ( sy-datum - 30 ).
elseif p_date = '4'.
    p_date11 = ( sy-datum - 90 ).
elseif p_date = '5'.
    p_date11 = ( sy-datum - 365 ).
endif.
Reward points if useful...
Regards
Sreenivas

Problem in picking up the value from list box

Hi,
I have created a parameter list box on the selection screen using VRM_SET_VALUES fn module and populating the list box. Now my problem is when i select one value from the list box and executing, it shows null value.
AT SELECTION-SCREEN OUTPUT.
PERFORM f_f4help.
FORM f_f4help .
REFRESH: gt_tvaut,
           gs_list.
CLEAR: gs_tvau,
         gs_value.
SELECT spras
        augru
        bezei
    FROM tvaut
    INTO TABLE gt_tvaut
    WHERE spras EQ sy-langu.
IF NOT gt_tvaut[] IS INITIAL.
    LOOP AT gt_tvaut INTO gs_tvau.
      gs_value-key = sy-tabix.
      CONCATENATE gs_tvau-augru
                  gs_tvau-bezei
             INTO gs_value-text
        SEPARATED BY space.
      APPEND gs_value TO gs_list.
    ENDLOOP.
ENDIF.
param = 'P_AUGRU'.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = param
      values          = gs_list
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
How to get the value which is selected in the selection screen becoz i'm using p_augru in further selection queries..
i have tried reading gs_list table but its not working.

Move the portion of function call 'VRM_SET_VALUES' to event at selection-screen on value-request for P_AUGRU. Rest is OK...
I mean, Your code should be like this.
AT SELECTION-SCREEN OUTPUT.
PERFORM f_f4help_values.
FORM f_f4help_values.
REFRESH: gt_tvaut,
         gs_list.
CLEAR: gs_tvau,
       gs_value.
SELECT spras
       augru
       bezei
       FROM tvaut
       INTO TABLE gt_tvaut
       WHERE spras EQ sy-langu.
IF NOT gt_tvaut[] IS INITIAL.
LOOP AT gt_tvaut INTO gs_tvau.
    gs_value-key = sy-tabix.
    CONCATENATE gs_tvau-augru
                gs_tvau-bezei
           INTO gs_value-text
    SEPARATED BY space.
    APPEND gs_value TO gs_list.
ENDLOOP.
ENDIF.
ENDFORM.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_AUGRU.
PERFORM f_f4help.
FORM f_f4help
param = 'P_AUGRU'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
    id              = param
    values          = gs_list
EXCEPTIONS
    id_illegal_name = 1
    OTHERS          = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.
Rgds,
Birendra

Compare values in list box

Hi,
I need to compare initial and current value in the list box. I' am trying to do the comparison in onSelect event.
Here how can I get the initial value. I guess we will get the current value here. Or let me know if you have
some better suggestions.
Thanks,
Aravind

In your approach of temp variable, you will have to keep refreshing your variable with the new value in the OnSelect Method.
For eg: l_temp is initially set in WDDOINIT, now you compare this with the new selected value in the OnSelect method and after displaying the appropriate message you will again have to reset l_temp with the newly selected value.
" note: I hope l_temp is declared in the attributes tab of the View
If you wish to implement Context Change log, follow these steps;
1. Place the following code in the WDDOINIT method of the Component Controller
* enable context change log
    data: context type ref to if_wd_context.
    context = wd_context->get_context( ).
    context->enable_context_change_log( ).
2. Create a new method 'GET_CHANGE_LOG' in the Component Controller's Methods Tab
" Create a Returning Parameter 'CHANGES' type WDR_CONTEXT_CHANGE_LIST
method get_change_log .
    data: context type ref to if_wd_context.
    context = wd_context->get_context( ).
    changes = context->get_context_change_log( ).
endmethod.
3. When you want to track the changes call his this method as follows,
DATA: l_ref_componentcontroller TYPE REF TO ig_componentcontroller .
    DATA: l_changes TYPE wdr_context_change_list.
    l_ref_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
    l_changes = l_ref_componentcontroller->get_change_log( ).
" l_changes will contain all the details of the changes made.
For more details refer component DEMO_CONTEXT_CHANGES.
Regards,
Radhika.

Values in List box

hi all,
i have a module pool,where i have field of table displayed as list box.i wants the the values of the list box to be fethched from another maintenance table,how can i do it.please let me know.thanks alot.
Regards

Hi,
Please use following code
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: ZTOB <ur other maintenance table>.
SELECT * FROM ztob.
    values-text = ztob-zbond.
    values-key = ztob-ztype.
    APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = <Module pool field name>
      values          = values[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.

Set Default Value In list box

Dear All,
               I am using the F4IF_INT_TABLE_VALUE_REQUEST this FM for filling the list box .Now i want to set default value in the list box
Example-
Supose i have 2 List box A & B and in list box i have to set default value in A list box X value and in B list box Y value .
X and Y value is coming in the list box from the master table .
Thanks & Regards

Code Snippet for your referance:
*F4 Help for Output Type
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_KSCHL
DATA: l_repid TYPE syrepid,
        l_dynnr TYPE sydynnr.
MOVE: sy-repid TO l_repid,
        sy-dynnr TO l_dynnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'KSCHL'
      dynpprog        = l_repid
      dynpnr          = l_dynnr
      dynprofield     = 'P_KSCHL'
      window_title    = text-001
      value_org       = 'S'
    TABLES
      value_tab       = it_value_tab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3

Missing Camera Raw Dialog Box in Photoshop Elements 8 for Windows.

Hello,
I have Photoshop Elements 8 for Windows. This runs on a 32-bit Windows Vista VirtualBox virtual machine.
It has been running fine, but suddenly opening raw Nikon images no longer opens the Camera Raw Dialog box, but takes me straight into editing on Photoshop Elements.
I really like having the Camera Raw Dialog box open as I do most of my image processing using this before opening the resulting file in Elements.
Does anyone know how to get this box back, or to open it from within Elements?
I have tried opening the images from within Photoshop Elements using the "Open As..." mnu item from the File menu, and the selecting "Camera Raw" as the image type, but it still opens without the Camera Raw Dialog box.
Thanks very much.

Check your screen resolution settings for vista.
I believe the screen resolution needs to be at least 1024 x 768 for the camera raw dialog to show in pse 8.
For example, if instead of running VirtualBox full screen, your running it in windowed or seamless mode and made the window smaller by dragging on the corner, that would automatically lessen the screen resolution in vista.

How can I add new value in a list box in a screen

Hi All ,
    In transaction CRMD_BUS2000120 (CRM Server), I need to add one value to the list box. Already 4 values are coming. How can I add 1 more value.
any suggestion is very appreciated.
Thanks & Regards,
Shekar.

Hi,
Check you have any exits to do that, if there are no exits then you can Copy the program and change the code.
to add the extra value in list box, you just have to append the new line to the internal table which you are passing to VRM_SET_VALUES FM.
some thing like this..
wa_list-key = sy-tabix.
wa_list-text = itab1-vbeln.
Append wa_list to It_list.
v_name = 'P_VBELN'.
call function 'VRM_SET_VALUES'
exporting
    id                    = v_name
    values                = It_list
EXCEPTIONS
   ID_ILLEGAL_NAME       = 1
   OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regads
vijay

Missing values in list box in SM30 - interval defined for domain

Similar Messages

Maybe you are looking for