"missing VI or C File"

j'ai suivi les instruction que vous m'avez envoyé sur le lien et malheureusement ça ne marche toujours pas!!!
est ce que vous avez une autre idée ?
merci
cordialement.
Achraf
optomesures

Forum correspondant à l'adresse suivante:
http://forums.ni.com/ni/board/message?board.id=170&message.id=199366
ClémentG

Similar Messages

Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
Thanks

Hi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

you can try this thread maybe? https://discussions.apple.com/message/16217061#16217061

Error: The following required field is missing from the launch file: jnlp

PLEASE help me.
I was at Starbuck's today trying to install new software for my new wireless internet card and when I finished I could no longer access any of my applications that require java... I have a macbook pro dual platform computer. When I try to access www.bayphoto.com to download my application it says: (see below) (which I think is strange because it's all about Starbuck's and it should be my java code- I think...). Like I said - I have no idea what's going on or how to fix this. Please help me or at least tell me whom to call- I feel so stupid- I just need help- ATT? Starbuck's? Sun?
Error: The following required field is missing from the launch file: <jnlp>
Under the "exceptions" tab it says:
MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
     at com.sun.javaws.jnl.XMLFormat.parse(XMLFormat.java:88)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:52)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:64)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:72)
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Launcher.java:214)
     at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:127)
     at com.sun.javaws.Launcher.launch(Launcher.java:95)
     at com.sun.javaws.Main.launchApp(Main.java:305)
     at com.sun.javaws.Main.continueInSecureThread(Main.java:213)
     at com.sun.javaws.Main$1.run(Main.java:108)
     at java.lang.Thread.run(Thread.java:613)
Under the "launch file tab" it says:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>AT&T Wi-Fi Service @ Starbucks</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="description" content="Starbucks Entertainment presented by AT&T Hotspot" />
<meta name="keywords" content="AT&T, Starbucks, Wi-fi, Wifi, Hotspot, coffee, music, books, games, fresh sheet, third place, online" />
<meta name="author" content="Starbucks Entertainment" />
<link rel="shortcut icon" type="image/ico" href="/favicon.ico" />
<script type="text/javascript" language="javascript" src="/dhtml/master.js"></script>
<script type="text/javascript" language="javascript" src="/dhtml/x_core.js"></script>
<script type="text/javascript" language="javascript" src="/dhtml/x_event.js"></script>
<script type="text/javascript" language="javascript" src="/dhtml/x_xhr.js"></script>
<script type="text/javascript" src="/dhtml/att/dhtml.js"></script>
<style type="text/css">
copied from starbucks master.css
body {
     background:#200D06 url("/graphics/att/themes/sbux/hotspot_bkgd.jpg") repeat-x scroll;
     color:#555555;
     font-family:Arial,Helvetica,sans-serif;
     font-size:small;
     line-height:1.5em;
     margin:0pt;
     padding:0pt;
     text-align:center;
#wrap {
     font-size:95%;
     margin:0pt auto;
     text-align:left;
     width:980px;
#starbucksframe {
     margin:15px 0pt 0pt;
     padding:0pt;
/*our addendae*/
div#header {
     height:95px;
     width:980px;
     background-image:url("/graphics/att/themes/sbux/header_bg.jpg");
     background-repeat:no-repeat;
     margin:0px;
     background-top:0px;
     background-left:0px;
     background-color:transparent;
div#btn_ctti {
     position:absolute;
     top:10px;
     margin-left:388px;
div#sbux_lfrm {
     display:inline;
     font-size:10px;
     color:#FFFFFF;
     margin-left:245px;
     top:49px;
     position:absolute;
     line-height:10px;
     font-family:verdana,arial,helvetica,sans-serif;
div#sbux_lfrm form {
     margin:0px;
div#sbux_lfrm a, div#sbux_lfrm a:link, div#sbux_lfrm a:hover, div#sbux_lfrm a:active, div#sbux_lfrm a:hover {
     color:#FFFFFF;
div#sbux_lfrm form label {
     display:none;
     visibility:hidden;
div#sbux_lfrm form input, div#sbux_lfrm form select {
     font-family:verdana,arial,helvetica,sans-serif;
     vertical-align:middle;
div#sbux_lfrm input.example {
     color:#656565;
#sbux_lfrm_row1, #sbux_lfrm_row2 {
     margin:0px;
#sbux_lfrm input#username, #sbux_lfrm input#password, #sbux_lfrm input#password_pw {
     width:136px;
     margin-right:6px;
     font-size:10px;
#sbux_lfrm select#roamRealm {
     width:130px;
     font-size:10px;
     color:#656565;
     margin-right:6px;
#sbux_lfrm_row2 {
     position:absolute;
     top:21px;
     left:-4px;
div#aupAgree_row {
     margin-top:4px;
     position:relative;
     left:-4px;
div#aup_box {
     float:left;
     position:relative;
     top:-3px;
div#aup_text {
     float:left;
     line-height:10px;
div#tm_badge {
     width:115px;
     height:94px;
     float:right;
     margin-right:0px;
     margin-top:0px;
div#password_value {
     display:inline;
div#hidden_pw_field {
     display:none;
     visibility:hidden;
div#sbux_lfrm.css_form {
     margin-top:0px;
</style>
<style>
/* IE specs */
body {
     font-size: x-small; /* IE5 Win */
     voice-family: "\"}\"";
     voice-family: inherit;
     font-size: small;
html>body { /* be nice to Opera */
     font-size: small;
/* self-clearing floats
/* trigger hasLayout and target ie5+6/win only */
*:first-child+html #header,
*:first-child+html #login_wrapper {
     height:95px;
#ny_legal {
     color:#CAC3BF;
     font-size:11px;
     font-weight:bold;
     padding:0;
#ny_legal a:link {
     color:#CAC3BF;
     font-size:11px;
     font-weight:bold;
     padding:0;
</style>
</html>
TOO LONG TO INCLUDE ALL CODE

<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase="file:///C:\eclipse\workspace\studentconverter\webroot" href="studentconverter.jar" >two things wrong here -
first codebase is not legal URL, File.separator (backslash on windows) needs to be converted to forward slash in URL's.
second, the href is not to the jnlp file, it is to the jar !
href="studentconverter.jar" - should this be href="studentconverter.jnlp" ?
/Dietz

Restore - filename for datafile is missing in the control file

I am practicing RMAN recovery procedures and I encountered a problem that I do not know how to solve.
1) I took a hot backup of my test database.
2) Create tablespace TS_DATA_TEMP
3) Deleted tablespace TS_DATA which had 2 datafiles
4) Created tablespace TS_DATA with 1 datafile
5) shutdown database
6) logged into RMAN in nomount
7) restore controlfile from autobackup;
8) alter database mount;
9) restore database;
RMAN> restore database;
Starting restore at 22-AUG-08
using channel ORA_DISK_1
the filename for datafile 5 is missing in the control file
skipping datafile 1; already restored to file /u02/oradata/EDM91/system01.dbf
skipping datafile 2; already restored to file /u02/oradata/EDM91/undotbs01.dbf
skipping datafile 6; already restored to file /u02/oradata/EDM91/index
skipping datafile 3; already restored to file /u02/oradata/EDM91/sysaux01.dbf
skipping datafile 7; already restored to file /u03/oradata/EDM91/TS_INDEX01.dbf
skipping datafile 9; already restored to file /u03/oradata/EDM91/TS_LOB01.dbf
skipping datafile 4; already restored to file /u02/oradata/EDM91/users01.dbf
restore not done; all files readonly, offline, or already restored
Finished restore at 22-AUG-08
10) tried to recover
Starting recover at 22-AUG-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/22/2008 15:04:22
RMAN-06094: datafile 5 must be restored
SQL> select name from v$datafile where file#=5;
NAME
/u04/oradata/EDM91/TS_DATA.dbf
12) alter database backup controlfile to trace
DATAFILE
'/u02/oradata/EDM91/system01.dbf',
'/u02/oradata/EDM91/undotbs01.dbf',
'/u02/oradata/EDM91/sysaux01.dbf',
'/u02/oradata/EDM91/users01.dbf',
'/u04/oradata/EDM91/TS_DATA.dbf',
'/u02/oradata/EDM91/index',
'/u03/oradata/EDM91/TS_INDEX01.dbf',
'/u04/oradata/EDM91/TS_DATA02.dbf',
'/u03/oradata/EDM91/TS_LOB01.dbf'
CHARACTER SET UTF8
So i'm not sure what the problem is. Datafile TS_DATA.dbf is located in the control file but i'm getting the error: the filename for datafile 5 is missing in the control file.
Suggestions on what's wrong with the control file?

I found my mistake; a newbie error.
I did not know I needed to include in my restore command the 'until' option when doing incomplete recovery. I only included the 'until' option in the recover command:
original command
restore database;
recover database until sequence =123;
should be
restore database until sequence = 123;
recover database until sequence =123;
I usually run the command using a RUN block with a SET UNTIL SEQUENCE but this case I used the single commands separately.
RUN
+{+
SET UNTIL sequence 123;
RESTORE DATABASE;
RECOVER DATABASE;
+}+

WUC-17 Information was missing from the supplied file download request java

Dear Forms Guru,
Can anybody help why i'm receiving this error using webutil.
WUC-17 Information was missing from the supplied file download request java..
the result in my jinitiator console are the ff:
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/webutil.jar from JAR cache
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/jacob.jar from JAR cache
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.5 Production
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/toolbar_images.jar from JAR cache
connectMode=HTTP, native.
Forms Applet version is : 90290
2005-Feb-13 01:48:19.514 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
2005-Feb-13 01:48:33.504 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
2005-Feb-13 01:48:34.04 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
Many thanks in advance...
benjie

Benjamin,
WebUtil tries to download the jacob.dll to the client. The error message you get is most likely caused by teh following section in teh webutil.cfg file
install.syslib.location=/webutil
## Do not change the following lines unless instructed to do so
install.syslib.0.7.1=jacob.dll|94208|1.0|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
## But you can add your own libraries in here
#install.syslib.0.user.1=testwebutil.dll|204872|1.0|true
If you have all these files available on the PC, then most likely the problem can be found in the virtual path setting for this directory
<virtual-directory virtual-path="/webutil"
real-path="c:/webutil/lib" />
in /j2ee/Oracle9iDS/application-deployments/forms/forms90web/orion-web.xml
Pleae refer to the webutil documentation for teh exact configuration steps.
Hope this helps
Frank

After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Media Missing in Live Type File Error Message

So I just upgraded to FCE 3.5 and have been playing around with LIve Type.
Yesterday I succeeded in making some titles with textured backgrounds etc. and getting them into FC. Today, I can still make the titles in Live Type, but when I import them into FC I get this message, in front of a purplish background, on the icon in the FC browser and when I drag the thumbnail into the viewer.
Media Missing in LIve Type File.
I have gone into project properties in Live Type and checked the "render background" box. I have also moved my media sequences above the background divider in the time line.
Nothing shows up in FCE, not even my text. But if I do a title with only text it shows up. If I include a texture and some effects, it does not show up. I just tried it with effects only and they show up. So it appears that it is a texture media problem. As soon as I open the text/effect title and add a texture, it comes up with this error in FCE.
My files for live type are on an external hard drive. it mounts fine. I can see all my titles fine in Live Type. They render fine. But don't show up in FCE.
I am working on a MacBook.
Any help?

When I Render it it shows up, but only for a few seconds then it goes black for a few more seconds. This happens when I have my in and out points set in LT and check, render only between in and out points, it also happens when this box is not checked. So I don't get the full time of my title effect.
My problem is that I didn't have to render before, why do I have to go to the trouble to render now?
I don't have to render on my iMac, it just works there. No rendering or exporting required. ?
Dan

When I export an indesign document the graphics are missing from the eps file.

When I export an indesign document the graphics are missing from the eps file.

The why it isn't working can be a number of reasons. While I never have exported an EPS out of ID before, I just tried it and it worked fine.
What "graphics" are missing? I used bitmaps, native drawn ID vector, lines and a placed EPS file. Came into AI as an opened EPS fine.
Links up to date? For items not hitting the EPS, are they on a layer set to non-printing?
In the export dialog,General tab, PostScript Level 3? Data format set to ASCII? On the Advanced tab, Send Data set to All? OPI off?

State is a missing VI or C file

Hi,
i´m developing an app that as to send an sql query to a DB server, using Bluetooth to communicate between server and client.
My client is being developed with LabVIEW PDA Module and my server was developed with LabVIEW 7.1.
When i try to make the build for windows in my client app, no error
occurs. But, when i try to make the build for pda, the following error
occurs:
state is a missing VI or C file. Details: There was an error building
the executable. Please check the VI´s or C files that were added.
I have already tried to build simple applications, each application with each of one of the subVIs that i´m using.
But, still the error occurs. In attachment i leave my VI (Execute SQL query.vi) and all the subVIs.
Can anyone give a help with this?
Thanks,
Pedro
Attachments:
Execute SQL query.zip ‏48 KB

I can't look at your VIs, but the PDA module occasionally has "weird" bugs (for example, try to build a program that monitors a value change event for 2 controls of a different type (numeric and boolean) in the same case and see what happens. This also happens for numeric controls with different represetations). Maybe this is one of them.
To report a bug, select the email option here and include a link to this thread.
Try to take over the world!

"NormFltH is a missing VI or C file" when using PDA module

To whom it may concern,
I developed a VI, which containing some Digital Signal Processing (DSP) functions and digital filters. I want to download it to my PDA via NI LabVIEW PDA module. However, the system always prompted "NormFltH is a missing VI or C file". I don't know what such "NormFltH" file is. If I run this VI on my PC, everything works well unless I try to run it in my PDA device.
Can anyone offer me some guidance or suggestion? Thanks so much for your valuable help.
Zhanpeng

will this helps you? if didn't solved your problem, post back.
Thanks,
Mathan

Pda state is missing vi or c file

Hello!
I have one VI that is working fine in LabVIEW PDA Module 8.0.1.
But when I upgrad this VI in PDA Module 8.20 and try to build it I get this error "state is missing VI or C file"!
I'm not new in LabVIEW PDA Module and I know that it has bugs (I hope that this is not one of them).
Real problem is that I can't localize this error and it may take me 3 day to find it because it is big VI!
Can somebody help me with this problem!
Thank you in advance,
Andrej

Hi Andrej,
Are you using global variables with cluster data types by any
chance? We have a minor known issue with those on PDA that we've
found a simple workaround for. Of course, if you can isolate
where the error is coming from that will make it much easier for us to
help you. If you can narrow down the code to something simple
that shows the behavior, then post it here and we can take a look at it.
Cheers,
Matt Pollock
National Instruments

Business Partner Name missing from ACH Payment File

We are trying to send a payment on a loan to a business partner via an ACH file. When the file is created, the payee name is missing from the ACH File. It runs perfectly in our developement client, but not in production. I can not seem to find any differences between the the two clients. Can someone point me in a direction that I can look to get the Payee into the ACH File?

Hello Wayne,
What type of payment files do you use and for which country?
Regards,
Endre

Missing parameters in init file

Dear All,
What would happen is following parmeters are missing in the init file of Oracle11g Database?
*.dispatchers='(PROTOCOL=TCP) (SERVICE=xyzXDB)'
*.shared_servers=1
Thanks

user9291399 wrote:
Dear All,
What would happen is following parmeters are missing in the init file of Oracle11g Database?
*.dispatchers='(PROTOCOL=TCP) (SERVICE=xyzXDB)'
*.shared_servers=1
Thanksyour database will operate just fine, but it will not accept shared server connections, only dedicated server.
For more info, you might look at the section on initialization parameters in fine Reference Manual found at tahiti.oracle.com

Top half of video is missing on imported WMV files. Running CS3 & Win XP Professional

Top half of video is missing on imported .WMV files. I'm running CS3 Adobe Premier Pro with Win XP Professional OS
Hi all,
I just installed my Adobe Premier Pro CS3 for the very first time. I then IMPORTED a WMV file into the Project Frame and then Dragged & Dropped it into the Time Line. All the windows (or Frames) Project Frame, Source Frame and the mini-Project Frame show this video with the top half missing. I’m running Win XP Professional with the latest Service Packs installed.
Please Help.
Thanks
Derek

After Searching the net for a while here, I found a solution to the "Half Screen" problem!
The half screen video problems seen while trying to play WMV files in my CS3 Adobe Premiere Pro program seems to have been due to a recent Windows software Security update made to it’s Windows Media Player programming. As soon as I removed that update, my WMV files now show normally within Adobe Premier Pro.
If you wish to uninstall this Windows Patch / Security Update on Win XP Machines:
No#1 Prior to removing/un-installing the file, shut off "Windows Automatic Updates" and set update preferences to manual. Thus in the future you can select which Updates you want to instal (and which one not to instal) *remember to ignore the KB2834904 update in the future! That is at least until Widows fixes this Security Update / Patch.
A) Go to "Add/Remove Programs" in Control Panel
B) In the Add/Remove Programs, check the "Show Updates" box located at the top of that window
C) Scroll down to "Windows XP Software Updates" and within that section, scroll down to "Security Update for Windows Media Player" KB2834904 (mine was dated 7-10-2013)
D) Click on the REMOVE button and re-start your system.
If using Win 7 Operating System: to remove this Patch / Security Update the file to remove is: KB2803821 - In Windows 7, go to "Add/Remove Programs" in Control Panel, click on the "View installed updates" link in the left sidebar, search for KB 2803821 and click REMOVE.
Good luck everyone!
Derek

Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

Does Quicktime Pro also edit .mov files on a PC?
Date: Wed, 27 Nov 2013 07:53:14 -0800
From: [email protected]
To: [email protected]
Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    created by Steve Grisetti in Premiere Elements - View the full discussion
Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

"missing VI or C File"

Similar Messages

Maybe you are looking for