Missing Videos, Memory says videos are there

When going to Settings>General>About>Videos it shows there are 12 videos and my memory is being used on them. I know I put a movie on my phone awhile back as well as some music videos. However, when I go to iPod>Videos there are no videos there. I either want to get the movie off or at least get it to show.

Had to clear music and videos out then sync again.

Similar Messages

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

HT3775 hello guys, i m just wondering that which software would be the best for my macbook pro. whenever i try to open those video, it says '(video name)avi' cant open. that will be appreciable if anyone can help me out. thanks.

hello guys, i m just wondering that which software would be the best for my macbook pro. whenever i try to open those video, it says '(video name)avi' cant open. that will be appreciable if anyone can help me out. thanks.

I think that VLC Media Player will play avi files.
Regards,
Clinton

Trying to add podcasts to shuffle I tunes says they are there but when I play them only a few are available?

trying to add podcasts to shuffle I tunes says they are there but when I play them only a few are available?

Hello rhdarby2,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPod shuffle: Playing audiobooks and podcasts
http://support.apple.com/kb/HT1831
Adding Audiobooks and Podcasts to iPod shuffle
The Autofill feature of iTunes will not add audiobooks and podcasts to any iPod model. They can be manually added by dragging them to the iPod shuffle in iTunes.
For iPod shuffle (3rd generation), you must enable Manually manage music in the Summary tab to drag songs to iPod shuffle. Additionally, you can automatically sync audiobooks using the Music tab and sync podcasts using the Podcasts tab in iTunes.
Have a nice day,
Mario

IPod screen shows no songs after sync, but iTunes says they are there

After syncing my iPod to my iTunes, the menu on the iPod shows no songs. iTunes says they are there and so does Winamp, but I can't see them by navigating the menu.
The only things that changed since my last sync are some ratings and a new playlist.
This has happened to me before. Usually it is resolved by rebooting my PC to make sure the iPod drivers are loaded. I tried rebooting my iPod (holding down Menu and Select), but that didn't do it either. I would like to avoid having to wipe the iPod and re-copy everything. And since this has happened before, it will probably happen again.
I can't upgrade my iTunes to the latest version because Apple stopped releasing W2k versions. Thanks in advance.
-Alan

I have that issue also. I ripped a few cd's, attached the ipod, synced it, but my libraries disappeared. "About" says there's 20+ gigs of something on there, but nothing in any menu. I scanned the ipod with Panda, no malware. I took the ipod to Geek Squad, and the Head Geek suggested reformatting from windows, and then reinstalling software with itunes. Did that, hour later, same situation. 20 gigs of nothing, even though itunes reported it had transferred over 6,000 mp3's. Ipod just isn't recognizing anything on it as music, but it worked fine up until the re-sync, and I hadn't done it for awhile, so I am now guessing there's a bug in the newest software, and it isn't a hardware issue at all.
On another note entirely, does anyone else find it strange that Apple's discussion page spell checker regards ipod and itunes as misspelled words?
Ed

Trying to combine folders within LR4 from two separate drives without creating duplicates--sometimes it won't let me transfer to destination folder because it says files are there when they are not; other times, allows duplicates to transfer

Trying to consolidate 261K+ of images within LR4 between two drives. Someone who was "helping" me with my Library in LR4 for some reason took some but not all of the file folders from my main backup drive (M) and duplicated them onto a partitioned hard drive (E) directly on the computer. The duplication is huge, so I am trying to condense them all back onto the original backup drive M, particularly since I believe there are also folders on the partitioned backup drive E that do not appear on the main one M, and there are many more file folders on M that are not on E, so that is the destination drive.
CONSOLIDATION: When I try to drag either the file folders or the individual files from the duplicate drive E to the original drive M to combine the two drives since the folders in many cases for some reason are not identical, sometimes LR4 says the files already exist when they clearly don't. Other times it allows me to drag and drop all files, even if the exact duplicates are already on the destination drive, thereby doubling the number of files per image and creating more duplicates. Right now I am opening each file folder on the duplicate drive E, looking at what extensions and file names are there, scrolling to the original drive, making sure they appear to be identical, then going back to the duplicate drive E, deleting the images in the folder, removing the folder, and moving to the next folder on the duplicate drive E. *There has got to be a simpler way.*
CONSOLIDATION APPROACH: I did start to create file folders names A, B, C and group file folders under them to reduce clutter, since those header folders can be closed down when not in use, but now I am wondering if I should have done that alphabetization to the main backup drive rather than to the partitioned backup drive.
My goal is to consolidate the two drives down to one, delete as many images along the way that I know I will never miss, then backup the catalog and export it to an external drive and then copy that to yet another drive for offside storage. Does this sound like the proper plan? Last time it took almost 24 hours and over a terabyte to export the catalog.
DUPLICATION: I also have many file folders that have the exact same image in them. One portfolio image may actually be in eight different folders, with the exact file, file name, file size, and date, even though I always have checked "no duplicates on import," How can this be? What is the best way to sort through duplicates? Why are the files in some of the duplicate folders not in numerical order? If I do a search and call up a file # and find 15 duplicates, the only way I can find where those duplicates reside is to take each duplicate, right click to Locate Folder in Library, then once I find it, I have to go back to All Photographs>Text.search for file #, go to the second duplicate, right click to Locate Folder in Library, then once I find it, I have to do it all again. Is there a simpler way to see all the occurrences in their respective folder locations at once?
SEARCH BY FILE FOLDER NAME ONLY: I also find I can't search for a file using a folder name (for example, "John_Doe"). I can only search by file #, keywords, or camera/lens/date, etc. Why will it not work to use All Photographs>Text>search for Doe? In other words, if I didn't keyword the individual files as John Doe, I can't search for them by that moniker.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
FOLDER LIST PRINTOUT: Is there a way to print out the Folder list (other than a screen shot)? I have so many file folders on each drive since I sort not by Year/Month/Date but by subject. It makes trying to compare duplicate folders quite unwieldy.
SLOW RESPONSE: And finally, as though that weren't enough, why does LR4 continually blink to a white screen after each keystroke? Takes forever just to be able to click through images, view info after hovering, etc. All other programs are closed down and the operating system shows very little memory being used.

A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really

Ipod doesnt show TV shows even though Itunes says they are there

After updating to the new iTunes, some of my TV shows (which i had set as movies before) dont appear on my iPod. After I change the file type (after clicking get info) to TV show, they dont appear on my 30GIG Video Ipod. They work fine when set as movies. On itunes when I look at what on my iPod they are there but I cant acces them becasue only Movies and Music Videos appears on my iPod.
PS I have latest itunes and ipod firmware

It's a problem with the new iPod software update. There has been much discussion about it on this forum and on ilounge. I was given this explanation from another poster:
"The reason this happens is because the iTunes category for "TV Shows" doesn't modify the meta-data of the video, rather, it just tells iTunes to display that video as a "TV Show", and does nothing to the videos on the iPod. To modify meta-data, I've found that AtomicParsley (for Terminal users) and Lostify (for GUI users) work alright."
Rather than use another application to correct the problem, I just restored the iPod to the earlier version. Now, everything works correctly. Hopefully, the next software update for the iPod will work. Incidentally, I kept the iTunes update.

Pictures not showing up in iPhoto - though it says they are there

I've got a roll that says it has 22 items in it - 5 movies and the rest photos. ONLY the movies show up. If I go into the actual folder in the Finder the photos are there. Any idea why they aren't visible in iPhoto? All of the other rolls are working fine.
thanks!

Any idea why they aren't visible in iPhoto?
Two possibilities:
They weren’t imported properly
or
They were and your database is damaged.
In the first scenario: drag them to the desktop and try import them again. In the second:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Regards
TD

TS2580 Only my welcome page published, not the links to the other pages. My server says they are there, but not showing up, any ideas? Thanks.

I developed my web site and published it with myserver. However only the first page shows up, no other pages, and the links to the other pages are missing on the welcome page. The host tells me that it is a software problem, that the pages are on the server. Pleae advise?
Thank You.

Rest assured, your pages are there :
http://www.lynxag.com/Welcome.html
http://www.lynxag.com/Products.html
http://www.lynxag.com/Photos.html
http://www.lynxag.com/Contact_Us.html
http://www.lynxag.com/feed.xml
You could have determined the presence of the pages by typing the pagenames in the URL.
The second option was to connect to the server and see with your own eyes what is there.
And since you do not use a Sitename in the URL, I assume you uploaded the files yourself instead of letting iWeb do the honours.
Regarding the Photo page, I do not see any photos on the page. Yet they are on the server too :
http://www.lynxag.com/Photos_files/Media/
If you did put the files on the server yourself, verify that you did upload every single file iWeb creates.
Edit : since the directories are open, you may want to consider closing them. Ask your webhoster to do it for you.

RCA or S-Video connectors for Mac are there any?

Hi all,
I don't know if this is the right forum for this post, if not please direct me to the right one. Ok, I was wondering if there is any way to hook up my Play Station 2 to my Mac so that I can play the games useing my display? Is there any realtivly inexpencive tv tuner, or something that I can use to hookup eather the RCA (red, yellow, white plugs) or s-video out's on the Play Station 2 to my Mac? Normaly I would hook it up to a TV, but I do not have a TV where I am and wil not for a while. Bellow is a link to the only one that I have been able to find.
http://www.microcenter.com/singleproduct_results.phtml?productid=0221682
Any help would be great. Thanks in advance.
G4 dual 1.25Ghz, FP 17 Mac OS X (10.3.5)

Hello Malcolm,
Thanks for the responce. I did not even think about that. So do think that it would be better for me to get the ATI 9200 video card that has a s-video plug built into it. Bellow is the link to it here on the Apple site. Thanks again and any help will be great.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/7201107/wo/qF4ic XuSOhPA2VZux3vQMY5ghjQ/1.0.19.1.0.8.25.7.11.0.1
Greg
G4 dual 1.25Ghz, FP 17 Mac OS X (10.3.5)

I've reset my iPhone 4S, my photos are gone but when I plug it into iTunes it still says they are there, can I get them back?

I reset my iPhone 4S and my photos have now gone, the albums are still there but no photos even though when I look at my storage and plug it into iTunes it still says that majority of my memory is to the amount of photos I have. Can anyone tell me how I can get my photos back?

last thing you can try would be go to settings, general, settings, reset all settings
if that does not work, a factory restore will be needed...

Songs won't show on iphone5 but itunes on Mac says they are there.

Hi guys,
On my iTunes on my Mac it shows that there are songs and playlists on my iphone (both when usb plugged in and on wifi) but on the actual device they won't show. Only about 10 songs show up. There is plenty of storage space on the device and they were there before but disappeared after an update. I've tried re-syncing and dragging them over manually but nada. Some of the playlists show but are empty on the device. Any ideas? Thanks.

Hi HeyBayLondon!
It sounds like you may want to try restoring your phone and then re-syncing the content from your computer to see if the information will show up after that procedure. Information on doing that can be found right here:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Thanks for coming to the Apple Support Communities!
Regards,
Braden

I recently purchased an album but a few of the songs do not play even though it says they are there. How do I get these songs to play?

I bought an album on the iTunes store and 3 of the songs do not work on my iPod or in my iTunes library...How can I fix this problem?

You can retrieve your songs from the iPod using something like Senuti.
It's a program that transfers music from iPod to iTunes on a Mac.
When you've got a copy of those songs on your computer, then you can restore the iPod.

Older 30GB ipod shows no songs in menu, but memory shows they are there

solutions? (I'm 2500 miles away from the home computer with all the songs...)

Hello sak54757,
And welcome to Apple Discussions!
About your only potential solution is to try a hard reset of the iPod. To do this, press and hold both the Select and Menu buttons together long enough for the Apple logo to appear. If no luck the first time, don't be afraid to try it a few more times.
Again, it's really your only option at this point. Sorry.
B-rock

Are there any drivers to use NI PCI-1411 with programs other than Labview?

I'd like to use my NI PCI-1411 capture card to capture images and/or videos outside Labview. Are there drivers available somewhere? E.g. TWAIN drivers?

I am not aware of any drivers other than IMAQ, but the IMAQ drivers do include a C library along with the LabVIEW version. I would take a good look at what is available in the IMAQ drivers. They may have what you need.
Bruce
Bruce Ammons
Ammons Engineering

Missing Videos, Memory says videos are there

Similar Messages

Maybe you are looking for