Missing Voicemail Indicator

I have a Z10 I got from the launch event. I'm using my T-Mobile US sim card. When someone leaves me a voicemail I get a popup message but no other voicemail indicator anywhere on the device.
Anyone else seeing this?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!
Solved!
Go to Solution.

So, I've solved this myself. After inserting my TMobile sim card I've rebooted several times and the hub entry for Voicemail hasn't shown up.
Since noticing it not working, I left a test voicemail. It gave me a popup message that I dismissed. Still nothing in the hub. I then removed the battery and rebooted and now the voicemail entry is in the hub and it seems to be working.
However, visual voice mail still wasn't working. If you had visual voice mail before you switched to the Z10 you will need to go into the Phone settings and set up visual voicemail. If you didn't you'll need to contact your provider to make sure the feature is enabled, if available.
Go to the Phone app.
Swipe down from the top and touch on settings.
Go toVoice Mail There should be a button for visual voice mail. It may ask you to call your voicemail to set it up. Tap on the "call" button at the top right corner. Once it answers and you hear that you have messages, simply hang up.
That should complete the setup for visual voice mail.
Enjoy!
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

N80 - Missed call indicator not appearing on Activ...

Hi All
As title - the missed call indicator doesn't appear on the active standby screen on my N80 (when I've got missed calls, obviously). It does appear on other screens (applications and menus). All other icons do (new SMS, new Voicemail, USB, wireless etc). Firmware is the latest version (AFAIK, it's the .017 version, dated 03-05-2006). Is this just me, or do all N80s have this problem (I'm on orange, BTW).
Thanks Si.

Hi
Thanks for the replies.
I've been in touch with Orange, and I'm waiting for them to get back to me. Strangely, I spoke to Nokia support and they said the missed call indicator shouldn't appear on the active standby screen (i.e. the 'U' shaped arrow underneath the battery meter). I'm not convinced - has anyone else got an N80 they can test (phone yourself, hang up after a couple of rings, then choose "exit" on the notification message - do you get the missed call icon top right on active standby, or just on the menus / application screens?)
Thanks
Si.

Message Indicator Options - Can I turn off missed calls indicator, but keep indicator for

Can I turn off missed calls indicator, but keep indicator for other messages? i.e. voicemails etc.

Yes you can.
Press the green dial key to enter the call log > Menu key > Options > Call Logging and set the logging to NONE and save.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Voicemail indicator not showing VMs on phone

What do I need to do to re-enable the VM indicator on my phone. Appears to have stopped working recently so have missed voicemails. Phone is a Panasonic KX-TG6052 and worked when FIOS installed a month ago.

There appear to be various threads on this, some suggesting that it needs to be enabled by Verison support. Please can someone confirm.
Looking to get an FSK enabled phone to correctly show voicemail indicator (in addition to different dialtone)

Missing class indicator field from database row

Hi,
I have following problem :
There is a class inheritance with root interface and 4 subclasses, they are initialized with class indicator field. If I use ReadAllQuery with an interface or some of concrete class as search class - it is working perfect, but if I try to build query with custom selected fields (addPartialAttribute) I always get an error - Missing class indicator field from database row.
AFAIK This field have not to be mapped in Workbench to real table column, how can I tell TopLink that I will read this indicator field too by reading some custom fields ? I thought TopLink reads such fields automatically, like it does it with primary keys.
Thank you
Maksim

This sounds like an issue with our partial attribute queries and inheritance as the type indicator column must always be read. Can you map the type indicator to a read-only attribute (mark mapping as read-only) and include this in your list of attributes as a work-around?
Doug

XML mapping inheritance problem; missing class indicator field

Hi!
I am currently working on a project which involves mapping a large domain model on a XSD schema. For this we use Toplink 10.1.3.1 which is mostly great. But now I have a problem while wanting to use class inheritance.
In my XSD I have the following defined
<xs:complexType name="Traject">
     <xs:sequence>
          <xs:element name="SoortTraject" type="SoortTraject"/>
     </xs:sequence>
</xs:complexType>
<xs:complexType name="SpecialTraject">
     <xs:complexContent>
          <xs:extension base="Traject">
               <xs:sequence>
                             [some elements]
               </xs:sequence>
          </xs:extension>
     </xs:complexContent>
</xs:complexType>My XML is an implementation of this XSD and looks like this
<Trajecten>
        <Traject xsi:type="SpecialTraject">
                 [implementation of the elements]
         </Traject>
</Trajecten>My domain model corresponts to the XSD, so there is a Traject object and an inherited SpecialTraject object.
In the mapping I used the Advanced properties->inheritance on both descriptors telling the Traject descriptor that it was the 'Root Parent Descriptor' ('Use class indicator field' -> 'use XML Schema Type attribute', 'Use class indicator dictionary') and the SpecialTraject what it Child Descriptor was ('Traject').
When I test my mapping it always results in the same error (no matter how I configure this inheritance mapping). It says :
[TOPLINK-44] missing class indicator field
Descriptor: XMLDescriptor(Traject --> [])What am I doing wrong? Does anybody know a sollution?
Best regards,
Jouke Stoel
Developer

This is the changed XML descriptor file. When I deploy the file it automaticly overrides the old file so it ain't possible that I was still using the wrong file
<toplink:class-indicator-mappings>
    <toplink:class-indicator-mapping>
        <toplink:class>Traject</toplink:class>
        <toplink:class-indicator xsi:type="xsd:string">Traject</toplink:class-indicator>
    </toplink:class-indicator-mapping>
    <toplink:class-indicator-mapping>
        <toplink:class>SpecialTraject</toplink:class>
        <toplink:class-indicator xsi:type="xsd:string">SpecialTraject</toplink:class-indicator>
    </toplink:class-indicator-mapping>
</toplink:class-indicator-mappings>I have posted the stacktrace but I had to translate a bit because my exception was in Dutch :)
Locale is a great invention
Exception [TOPLINK-44] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DescriptorException
Exception description: Missing class indicator field of database row [UnmarshalRecord()].
Descriptor: XMLDescriptor(Traject --> [])
     at oracle.toplink.exceptions.DescriptorException.missingClassIndicatorField(DescriptorException.java:887)
     at oracle.toplink.internal.ox.QNameInheritancePolicy.classFromRow(QNameInheritancePolicy.java:84)
     at oracle.toplink.internal.ox.XMLRelationshipMappingNodeValue.processChild(XMLRelationshipMappingNodeValue.java:13)
     at oracle.toplink.internal.ox.XMLCompositeCollectionMappingNodeValue.startElement(XMLCompositeCollectionMappingNodeValue.java:62)
     at oracle.toplink.ox.record.UnmarshalRecord.startElement(UnmarshalRecord.java:352)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:205)
     at oracle.toplink.internal.ox.record.SAXUnmarshaller.unmarshal(SAXUnmarshaller.java:189)
     at oracle.toplink.internal.ox.record.SAXUnmarshaller.unmarshal(SAXUnmarshaller.java:147)
     at oracle.toplink.ox.XMLUnmarshaller.unmarshal(XMLUnmarshaller.java:228)
.

Return Order incomplete because of missing address indicator (VBPA-ADRDA)

Hello,
Using the VA02 to create a subsequent retun order results in a complete return order created. However, when I use BAPI BAPI_CUSTOMERRETURN_CREATE to create the return order, the incompletion log identifies a missing address indicator (VBPA-ADRDA) for the ship-to party. Both sold to and ship to party are defined as one time customers. Looking at the entries in table VBPA the problematic customer holds 'D' as the address indicator value while the other customer holds 'E' as the missing address value.
What could be the reason for the missing address indicator for that specific customer while creation works fine using the subsequent retun order creation?
Thanks in advance, Ziv.

1: You took care of the copy controls.
2: Whats the item category you are using in your return order. Please mark that item category as not relevant for pricing. Uncehck the pricing field in VOV7 for this item category. Also check the incompletion procedure to make sure "pricing" is not an entry.
3: Please check the pricing procedure you are using for the return order type, uncheck any "Mandatory " pricing conditions.
4: In the pricing procedure determination OVKK, please check you have the required entry for the return pricing procedure.
Please test with these changes and see the results,
Regards
Sai

CO27 - Missing part indicator (Urgent)

Hi All,
In CO27, i find for a few materials, the missing part indicator has been ticked, while for a few materials it is not. I would like to know how is this indicator being set by the system. Because for the parts which i do not seen the indicator ticked, are not available at the moment in stock & hence i believe this indicator should be ticked. Kindly let me know where all i should check.
Vivek

Dear Vivek
1st question
If no ava check is not ticked and status check is ticked.
System will check availability of material when released and saved. Then after this if the MAT not available status NMAT you can see in the header. Once it is register, system will check the availability every time you saved till you will get the status with out NMAT. In case NMAT is not there during release and after that there was some problem with the material stock and let us say stock is reduced, then actually material is not available, but in production order Since NAMT is not there system will not check the material availability.
In your case since you are checking the ava in background , if you want the system to check all orders with or without NMAT then dont tick-status check.
In this case system load will increase as system has to check all the orders.
2.Please do not mistake this tick. This is applicable for HALB material, and not for Raw material.
If you have HALB material and it is having stock of 10, production orders for this halb material lets say 2 prod orders released (qty 10 each) and 3 are not released(qty 10 each).
Then ava qty will be
I leave Production orders field blank = 10
(ii) when i consider only released production orders = 10+10*2=30
(iii) when i consider all production orders = 1010*210*3 = 60
If you are taking raw material, this tick has not relevant
your 3rd question -
Ava check if material consists of 2 things
checking rule - defined for a transaction - PP for production order, A is for sales order, B is for delivery etc.
Checking group - what you define in material master 01/02/CH.
Combination of above checking rule and checking group will fix the scope of check.
Hence in OPJJ, you need to give checking rule and checking group both.
as per understanding 01 will not change to 02 as in that plant 01 is fixed if it is in material master.
Please come back if required
If you want I will send you the preliminary document to understand what is AVA check if required.

Composite invoking Spring Context errors with Missing class indicator field

Hi. I’m working on a composite with a Spring Context component that is referenced in a BPMN process and have run into some issues and I was hoping you may have some insight.
I’m able to deploy the composite successfully, however when I try testing it on the SOA Server, it fails with the exception below:
<auditQueryPayload auditId="17008" ciKey="12">
<dataState>
<dataObject name="FaultMessage" isBusinessIndicator="false">
<value> com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{ summary=<summary>Exception [EclipseLink-44] (Eclipse Persistence Services - 2.3.1.v20111018-r10243): org.eclipse.persistence.exceptions.DescriptorException Exception Description: Missing class indicator field from database row [UnmarshalRecord()]. Descriptor: XMLDescriptor(com.bea.infra.events.ExtendedData --> [DatabaseTable(ns2:ExtendedData)])</summary> ,detail=<detail> Exception Description: Missing class indicator field from database row [UnmarshalRecord()]. Descriptor: XMLDescriptor(com.bea.infra.events.ExtendedData --> [DatabaseTable(ns2:ExtendedData)])</detail>} </value>
</dataObject>
</dataState>
</auditQueryPayload>
The class referenced in the error, ExtendedData, is a very simple, abstract class. Here it is:
@XmlSeeAlso( { AssetUnregistered.class, ExtractionReassign.class,
RelatedAssetRegister.class, ExtractionSubsequentNotify.class,
ExtractionIntialNotify.class, AssetSubmission.class,
ExtractionStatusChanged.class, MultiUse.class,
ALERExtendedData.class })
public abstract class ExtendedData {
Do you have any thoughts or would know someone who could help?
Thanks,
Mike

I've tried adding the jar to the classpath, installing the jar on the weblogic server, adding all the dependencies, and adding the jar to the project sourcepath. None of these worked either. Any Help would be appreciated.

Missed Call Indicator....wont go away!

my phone froze 1 day as my husband was calling. Well his ringtone wnet off but the call never came up so that i could answer it, the whole thing froze and I had to restart it by taking out the battery.. Ever since I cannot get the 1 Missed Call indicator to go away. Ive restarted many times, Checked the call logs, it just wont go away....
anyone else have any suggustions?
thanks

To clear the Misse Call Indicator complete the following steps:
Connect the BlackBerry smartphone to the computer.
Open BlackBerry Desktop Manager.
Double-click Backup and Restore, then click Advanced.
From the list of Device Databases, select the appropriate database. For your problem, select Call Log.
Click Clear.
In the Warning window, click OK.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Voicemail Indicator On but No Messages

Good morning...this issue is driving me batty . Every time I turn the phone on, it indicates I have voicemail or "voicemail activity has been received" when in fact there are no voicemails. I check call history and I get the voicemail message even when I haven't had any incoming calls. Is there a setting to stop this?

The voicemail indicator usually stays on if you haven't listened to all voicemails all the way through, as well as the options after each one. Have you tried that?
If that doesn't work, try going to Settings -- Applications -- Manage Apps -- All -- Scroll all the way down to Voicemail, and select it, then select "Clear Cache"

SPA942 Experiencing difficulties with the Voicemail Indicator

I have 6 SPA942 VIoP communication devices all seem to work well but one; the voicemail indicator light stays continuously lit even when there are no voicemail. I found a support site telling me to access the web-based setup page from the network option at the main menu. This did not work for me because I could not figure out how to access the web based page from option 9.
Okay have you figured out that I am a bit clueless when it comes to IT... however I can make you some homemade fire roasted tomato soup and 4 cheese grilled sandwich that will knock your socks off. Soooo. If you could help me I will give you a great recipe.

Chris Cox wrote:
Actually, I think it did. We're the only ones who can post in here.
Well, that should down on the posts! Is it an Adobe conspiracy? (prolly not :~)
BTW, it was weird reading something and wanting to reply and not be able to...

Missing mouse indicator

Hi,
I have a small yet sometimes annoying problem.
When I want to rename a file or folder in Thunar (I'm using xfce) I don't have a mouse indicator. I don't know if it's actually missing or if it is just white because at some letters a white pixel appears.
In Firefox this problem doesn't occur and I have the black flashing indicator in every form field.
I looked through my applications and noticed the missing cursor in the search field of geany or the typing field in gajim, too
I already tried different cursor themes and also gtk themes.
Anyone has an idea how to solve this?
Thanks in advance.
Last edited by Barghest (2009-02-02 21:29:52)

Is it checked in the preferences?
Apple menu >> System Preferences >> Energy Saver >> Settings for: Battery >> Show details >> Options >> Show battery status in the menu bar (check)

Text/missed call indicator icons no long showing

This is a minor thing, but I prefer to have the area below the clock and above the list of icons to show me alerts such as that I have a text msg or a missed call or a voicemail. It was doing this before but for some reason now all I get is the blinking red light but the alert icons are no longer showing up.
I looked through the forums and couldnt find anything also tried to mess with settings but haven't come up with anything.
Thanks if you can help.

Emails and Texts will always have an audio and vibration (if turned on) cue when something comes in. Text messages and toasts will turn on the phone to show you the message for a brief period same as the iPhone and any Andriod device.
In regards to a notification light, no such thing in Windows Phone Nokia devices.
All you have to do is turn on the phone and on the lock screen you should see your missed calls, emails and texts. Toast messages will not be displayed on the lock screen. We'll have to wait for Windows Phone 8.1 next month to get a notification center type interface.

[Solved] Missing App indicator for Shutter

I just went through the process of installing all of the [AUR packages] for [Shutter]. I made it through that process fine, no errors all the dependencies are installed. For some reason when I start the application the App Indicator doesn't appear, instead I just get a matted gray square:
I would expect the actual shutter icon to be there:
The icon itself doesnt appear to be missing I can see it in /usr/share/pixmaps along with other icons that are appearing: Dropbox, Redshift, PIdgin, etc...
Any thoughts
Last edited by mcmillhj (2014-02-05 17:10:48)

Not really sure what happened, after about 45 minutes the app indicator appeared. I can't recall any actions during that time period that would cause it to be fixed.

Missing Voicemail Indicator

Similar Messages

Maybe you are looking for