Missing VSS System Writer and CAPI2 error in Event Log

Hello,
I'm having problems with making full system backup of Windows 2008 R2 x64. It looks like this is related to missing VSS System Writer. When I'm running command "vssadmin list writers" there is no System Writer in writers list and in event log CAPI2 error (event ID 513) is showing with this description:
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
TraverseDir : Unable to push subdirectory.
System Error:
Unspecified error
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
<EventID Qualifiers="0">513</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2010-03-14T01:06:35.639125000Z" />
<EventRecordID>207975</EventRecordID>
<Correlation />
<Execution ProcessID="968" ThreadID="11588" />
<Channel>Application</Channel>
<Computer>System3</Computer>
<Security />
</System>
<EventData>
<Data>Details: TraverseDir : Unable to push subdirectory. System Error: Unspecified error</Data>
</EventData>
</Event>
any idea what could be wrong?
Thanks in advance

Hello ,
Based on the research, the VSS System Writer runs in the context of CryptSvc service on Windows Server 2008. To make the system writer works normally, please open services
console to verify that the Cryptographic Services logon as the credentials of the "Network Service" account.
The VSS system writer can be missing due to several reasons,  to isolate this issue, please refer to the following steps to boot the problematic server with clean
boot mode to perform the test.
Steps: Clean Boot
1. On a problematic server perform a clean boot and check if the issue still exists
2. Click Start->Run...->type msconfig and press Enter
3. Click Services tab and select Hide All Microsoft Services and Disable All third party Services.
4. Click Startup tab and Disable All startup items
5. Click OK and choose Restart
After the server reboot, please run "vssadmin list writers" to check if the "System Writer" can be displayed.
If the issue still exists, please open a CMD prompt as Run As Administrator and type the following commands to see if it the system writer will be occure.
CD c:\windows\system32
Takeown /f %windir%\winsxs\filemaps\* /a
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users:(RX)"
Moreover, based on the experience, it has been reported that there is some permissions issue which can cause this kind of issue. Please follow the steps below and check
if it can be helpful.
On domain controller
1. Open Active Directory Users and Computers
2. Click View and then "Advanced features"
3. Right Click built and click properties.
4. Click security tab.
5. Grant read permission to 'Authenticated Users'
6. Click Apply and OK.
7. Restart Cryptographic Services.
Note: By Default, it should have read permission for the system to take system state backup.
Hope this can be helpful.
MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin

Similar Messages

  • HT1263 where can I find the System Mac 9 that would be in the (original release) factory shipped iMac's prior to 2010? I'm missing key system data and cannot update to iPhoto app past 6.0.6; any advice will be helpful, thank you.

    Where can I find the System Mac 9 that would be in the (original release) factory shipped iMac's prior to 2010? I'm missing key system data and cannot update to iPhoto app past 6.0.6; any advice will be helpful, thank you.

    Where can I find the System Mac 9 that would be in the (original release) factory shipped iMac's prior to 2010?
    What are you refering to here? Mac OS 9 came out around 2001 ( or about ).  Mac OS 9 last run  in an emulation mode in 10.4.11 -- Tiger.  Mac OS 9 ran on PPC machines that were last produced before 2004 or so.
    I think your conclusion you need Mac OS 9 is incorrect.
    I'm missing key system data and cannot update to iPhoto app past 6.0.6; any advice will be helpful, thank you.
    iPhoto '11, Mac OS X (10.6.8), need to upgrade system to 10.8
    We need to verify some information.  Are you really running 10.6.8?  What hardware?
    Here is how to find out what version of Mac OS you are running:
    Click on the blue apple in the upper left hand of the screen.
    click on this icon
    Click on the first line, "About This Mac"
    Most of these are numbers & that's what we want.
    What version & Processor do you have?

  • VSS snapshot of 1.1TB is ending after few hours with timeout. No errors in event log

    Hello,
    does someone have experienced issue where starting making snapshot (forum GUI or command line) is taking a lot of time and then it just ends with timeout?
    I have scenario on virtualised Windows Web Server 2008 R2 where backup is being made by Idera Backup Software but since it relies on VSS Snapshots then we can just skip this point because making snapshots from directly Windows command line or drive preferences/GUI
    is ending with timeout for this single drive after few hours. Affected system has 3 drives: C - 95GB, D-1.06TB and E-120GB. C and E can be backuped correctly and only drive D has problems. System is updated with latest drivers vssadmin for writers returns
    list without any errors and snapshot for drive D which ends with timeout is not generating any error in event log. I wanted to configure VSS trace like it is being instructed on this site:
    http://publib.boulder.ibm.com/infocenter/tsminfo/v6/index.jsp?topic=%2Fcom.ibm.itsm.tshoot.doc%2Ft_pdg_traceprfrm.html
    but I don't see any trace.txt file on given location. If I remove drive D from backup process it ends without errors. System was restarted many times. Only thing which is visible in windows Event log (application part) is that "The VSS service is shutting
    down due to idle timeout." about 4 hours after snapshot making proces is starting.
    I've contacted Idera backup about this but they can't help too much if Windows snapshot process is failing. They suggested that something can be wrong with this drive but since this is virtualised machine and all of my VM are being stored on RAID10 disk
    array connected to my server using fiber connections then I don't think that this is hardware issue (especially when other two drives are located on the same LUN on disk array).
    Any suggestions?
    Regards

    Hi,
    Do you create VMs on Hyper-V or VMWare? Based on research, possible causes could be:
    1. Files changes in the volume is very huge. So the shadow size may be big and the current shadow storage my not able to hold it. And that’s cause the shadow copy creation failure. 
    2. The I/O in D drive is heavy and make the shadow copy I/O failed. 
    3. Server is too busy to handle the request.
    4. The disk is heavily defragment.
    Please refer to the articles to troubleshoot the issue:
    Time-out errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup and during times when there are high levels of input/output
    http://support.microsoft.com/kb/826936/en-us
    VSS timeouts during backup? What could contribute to that?
    https://blogs.technet.com/b/askpfeplat/archive/2012/09/12/vss-timeouts-during-backup-check-fragmentation.aspx
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error in event log

    hi
    from improper installation of coldfusion "Customer variable
    in the registry I changed the configuration to the cookies but I
    have error in event log
    "An I/O operation initiated by the Registry failed
    unrecoverably. The Registry could not read in or write out or flush
    one of the files that contain the system's image of the Registry. "
    and my registry is full, this key
    HKLM/Software/Macromedia/coldfusion/CurrentVersion/clients
    and each time you restart the coldfusion the old entered the
    back regitre
    thank for help
    patrick

    Hi Steve,
    We need to confirm some situations:
    1. Did this issue occur when you start Windows or specific application?
    2. Could you let us know the complete event log?
    And then If it's Windows startup issue, I suggest you perform a startup repair.
    Startup Repair
    http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
    Meanwhile, Rename this file: %windir%\panther\setup.etl to setup.old and reboot to see if it could be resolved:
    If it's one application issue, reinstall it for test.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • OutputStreamWriter doesn't write and no error message

    Hi,
    I wanted to try out a servlet but when I use OutputStreamWriter to write some text to a file on the server and use InputStreamReader to read the contents of the file, error returned is from InputStreamReader (FileNotFound Exception). Any ideas?
    import java.applet.*;
    import java.io.*;
    import java.net.*;
    public class TestApplet
        extends Applet {
      public TestApplet() {
      public void init() {
        try {
          jbInit();
        catch (Exception e) {
          e.printStackTrace();
      private void jbInit() throws Exception {
        try {
          // Write section
          URL url = new URL(this.getDocumentBase(), "test2.txt");
          URLConnection connection = url.openConnection();
          connection.setDoOutput(true);
          connection.setDoInput(true);
          BufferedWriter out = new BufferedWriter(new OutputStreamWriter(connection.getOutputStream(), "UTF8"));
          out.write("1232423434");
          out.flush();
          out.close();
          // Reading section
          URL url2 = new URL(this.getDocumentBase(), "test2.txt");
          URLConnection connection2 = url2.openConnection();
          connection2.setDoOutput(false); // GET
          connection2.setDoInput(true);
          BufferedReader in = new BufferedReader(new InputStreamReader(connection2.getInputStream()));
          String line;
          StringBuffer result = new StringBuffer();
          while (null != ( (line = in.readLine()))) {
            result.append(line + "\n");
          in.close();
          System.out.println("contents = " + result + "|");
        catch (Exception e) {
          System.out.println("Exception e = " + e);
          e.printStackTrace();
    }The error returned:
    Exception e = java.io.FileNotFoundException: http://127.0.0.1/test/servlets/test2.txt
    java.io.FileNotFoundException: http://127.0.0.1/test/servlets/test2.txt
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:798)
         at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at TestApplet.jbInit(TestApplet.java:93)
         at TestApplet.init(TestApplet.java:50)
         at sun.applet.AppletPanel.run(AppletPanel.java:353)
         at java.lang.Thread.run(Thread.java:534)

    You can not just write and read files to a url. You can open a socket to the server and send the file over to a socket server that will write the file and then request the file back from the socket server. Or you can look into the Apache HttpClient and FileUpload packages to upload the file through a servlet and then download back through a servlet.

  • Org.clamav.freshclam and permissions error on freshclam.log

    This is an adjunct to a branched discussion in this thread regarding org.clamav.freshclam continually generating error reports in the system log.
    After enabling, but not starting, Mail service on my server (XServe Dual-G5, 10.5.8 Server) my system log began filling with the error as per the referenced thread. The first entry when the error cropped up was:
    Nov 5 15:23:20 xserve1 com.apple.launchd[1] (org.clamav.freshclam): Unknown key for integer: Iterations
    Nov 5 15:23:20 xserve1 org.clamav.freshclam[40472]: ERROR: Incorrect argument format for option --checks (-c)
    Nov 5 15:23:20 xserve1 org.clamav.freshclam[40472]: ERROR: Can't parse command line options
    Nov 5 15:23:20 xserve1 com.apple.launchd[1] (org.clamav.freshclam[40472]): Exited with exit code: 1
    Nov 5 15:23:20 xserve1 com.apple.launchd[1] (org.clamav.freshclam): Throttling respawn: Will start in 10 seconds
    Per the instructions in the referenced thread, I ran
    launchctl unload /System/Library/LaunchDaemons/org.clamav.freshclam.plist
    I then used pico to edit the org.clamav.freshclamplist file, removing the space between the '-c' and value in the line:
    <string>-c 4</string>
    I also edited the /etc/freshclam.conf file to change the value:
    #DatabaseMirror db.XY.clamav.net
    to
    DatabaseMirror db.us.clamav.net
    I then ran
    freshclam -v
    followed by
    launchctl load /System/Library/LaunchDaemons/org.clamav.freshclam.plist
    Checking the log again, not only had the original error continued whilst I was editing, but also on the relaunch of freshclam a new error cropped up:
    Nov 7 08:35:39 xserve1 com.apple.launchd[127] (org.clamav.freshclam): Unknown key for integer: Iterations
    Nov 7 08:35:39 xserve1 com.apple.launchd[127] (org.clamav.freshclam): Ignored this key: UserName
    *Nov 7 08:35:39 xserve1 org.clamav.freshclam[474]: ERROR: Problem with internal logger (UpdateLogFile = /var/log/freshclam.log).*
    *Nov 7 08:35:39 xserve1 org.clamav.freshclam[474]: ERROR: Can't open /var/log/freshclam.log in append mode (check permissions!).*
    Nov 7 08:35:39 xserve1 com.apple.launchd[127] (org.clamav.freshclam[474]): Exited with exit code: 62
    Nov 7 08:35:39 xserve1 com.apple.launchd[127] (org.clamav.freshclam): Throttling respawn: Will start in 10 seconds
    Nov 7 08:35:48 xserve1 org.clamav.freshclam[475]: ERROR: Incorrect argument format for option --checks (-c)
    Nov 7 08:35:48 xserve1 org.clamav.freshclam[475]: ERROR: Can't parse command line options
    Nov 7 08:35:48 xserve1 com.apple.launchd[1] (org.clamav.freshclam[475]): Exited with exit code: 1
    Nov 7 08:35:48 xserve1 com.apple.launchd[1] (org.clamav.freshclam): Throttling respawn: Will start in 10 seconds
    Nov 7 08:35:49 xserve1 org.clamav.freshclam[476]: ERROR: Problem with internal logger (UpdateLogFile = /var/log/freshclam.log).
    Nov 7 08:35:49 xserve1 org.clamav.freshclam[476]: ERROR: Can't open /var/log/freshclam.log in append mode (check permissions!).
    Nov 7 08:35:49 xserve1 com.apple.launchd[127] (org.clamav.freshclam[476]): Exited with exit code: 62
    Nov 7 08:35:49 xserve1 com.apple.launchd[127] (org.clamav.freshclam): Throttling respawn: Will start in 10 seconds
    (Note: after the first 'Exited with exit code: 1' entry, it only repeated the last four lines as above as it respawned.)
    Checking the ownership / permissions on the freshclam.log file showed that the owner/goup was _clamav:admin and the permisions were -rw-r----- which is proper and in line with the other clamav files in the directory. Thinking that perhaps the logfile was corrupted, I deleted it and made a new one, setting the owner, group and permissions as per the original. The log errors continued.
    Finally, in desparation, I ran
    chmod 660 /var/log/freshclam.log
    setting the permissions to -rw-rw---- and the errors ceased!
    Now, this is not proper file permissions nor does it explain why freshclam suddenly could not append the logfile, but freshclam is now happily churning away without generating continuous log error entries. For the moment, I am not going to argue with successful results!
    -Doug

    Hi Fred,
    interesting.. but I'm of the mind "If it ain't broke.." and it has been running without problem since applying the fix. I may end up having to migrate Mail services to a different server soon though, so I'll keep it in mind if the error crops up again. Thanks for the tip!
    -Doug

  • Battery drain and error in event log!!!

    So I recently got a curve 9360, but battery life wasn't the 1 and a half days I expected. Doesn't last more than 5 hrs on normal use, and it falls drastically when doing slightly heavy work like now, bridged to my PlayBook like now, it turns of radio at about 30% then blacks out in under 5 minutes. So i did some digging around and most people said it was the OS, so I downloaded the os that most people say fixed there curve's, got a response for 7.1.0.190 and 7.1.0.258, bug still no difference. Out of curiosity I checked my event long and found this error ,
    Name: System
    Severity: Error
    GUID: 97c9f5f641d25e5f
    Time: "the date and time shown"
    JVM:INFOp=mypin,a='7.1.0.190',o='9.6.0.24',h=e001507
    So when I changed the os to 7.1.0.190, still got the same error and it's always at the top of the event log so am guess its what's causing the battery drain. Changed batteries, and wiped the OS and reinstalled but no solution. 
    Any help people!

    Hi,
    The Certificate Chain you installed on the FE server did not have "Enable all purposes for this certificat" enabled.
    Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the certificate chain you installed--Properties--General, check the "Enable all purposes for this certificate".
    Restart Lync FE server and check the problem is solved.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Seemingly successful install of Exchange 2013 SP1 turns into many errors in event logs after upgrade to CU7

    I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server. 
    I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online). 
    I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me). 
    Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
    Issue 1)
    After each reboot I get a Kernel-EventTracing 2 error.  I cannot find anything on this on the internet so I have no idea what it is.
    Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
    I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
    Issue 2)
    I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
    https://support.microsoft.com/kb/2870416?wa=wsignin1.0
    One of the perf counters fails to register using the script from the link above.
    66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
    New-PerfCounters : The performance counter definition file is invalid.
    At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
    +    New-PerfCounters -DefinitionFileName $f
    +    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo         
    : InvalidData: (:) [New-PerfCounters], TaskException
        + FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
       12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
    But that one seems unrelated to the ones that still throw errors. 
    Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
    Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
    exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
    is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
    The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Issue 3)
    I appear to have some issues related to the healthmailboxes. 
    I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
    SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
    lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
    I reran setup /prepareAD to try and remedy this but I am still getting some.
    Issue 4)
    I am getting an MSExchange RBAC 74 error. 
    (Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
    Issue 5)
    I am getting MSExchange Assistants 9042 warnings on both databases.
    Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
    skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
    Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server. 
    If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
    Issue 6)
    At boot I am getting an MSExchange ActiveSync warning 1033
    The setting SupportedIPMTypes in the Web.Config file was missing. 
    Using default value of System.Collections.Generic.List`1[System.String].
    I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.

    Hi Eric
    Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time. 
    I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
    I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”. 
    If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
     So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering. 
    Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users. 
    I then applied an address policy to them and gave it the highest priority. 
    Then I set a default email address policy for the entire organization. 
    After reinstalling Exchange all of my system mailboxes were created with the internal domain name. 
    So issue number 3 above has not come up. 
    For issue number one above I have created a new thread:
    https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
    For issue number four I have posted to this existing thread where there is so far no resolution:
    https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
    Issue number Five I have managed to recreate and get rid of in more than one way. 
    If I create a new database in ECP and set the database and log paths where I want, then this error will appear. 
    If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear. 
    The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service. 
    If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away. 
    So my off hand guess is that these are caused by orphaned system mailboxes.
    For issue number six I have posted to this existing thread where there is so far no resolution:
    https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
    So for the remainder of this thread we can try and tackle issue number two which is the perf counters. 
    The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7. 
    Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five. 
    Using all of your suggestions so far has not removed these 5 remaining errors either.  Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
    to make them go away if possible.

  • Errors in event log of Secondary DPM server protecting replicas on Primary

    Hello again
    I have two DPM servers, one situated on-site (primary) and one situated off-site (secondary). Protection jobs seem to be running correctly on both servers in that the jobs complete and I am able to restore data from the backups. I use the primary server
    to make the initial backups of critical systems and data (Exchange MDB's etc) and the secondary server to backup those replicas off-site in case of primary site loss or DPM system loss.
    The primary server is a physical server and the secondary server is a virtual server. Both DPM servers have their DPM databases stored on one physical SQL server that is in the primary site.
    Basically what is happening is that every day our virtual machines are snapshotted (secondary DPM server included) and everyday the snapshot of the secondary DPM server fails. I see the following to entries in the event log of the secondary server.
    Error 1:
    WARNING
    Source: MSDPM
    Event ID: 955
    The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 2 Schedules removed: 2 Schedules updated: 0.  
    Problem Details:
    <ConsistencyCheck><__System><ID>26</ID><Seq>27861</Seq><TimeCreated>22/05/2014 23:01:31</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
    /></Tags></ConsistencyCheck>
    the message resource is present but the message is not found in the string/message table
    Error 2
    ERROR
    Source: MSDPM
    Event ID: 4212
    The description for Event ID 4212 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    DpmWriter service encountered an error during PrepareBackup as more than one component is selected for backup in the same snapshot set.  Select a single DPM replica for backup and try the operation again.
    Problem Details:
    <DpmWriterEvent><__System><ID>30</ID><Seq>7</Seq><TimeCreated>23/05/2014 00:30:45</TimeCreated><Source>d:\btvsts\21011\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>438</Line><HasError>True</HasError></__System><DetailedCode>4212</DetailedCode></DpmWriterEvent>
    the message resource is present but the message is not found in the string/message table
    These two events are followed by another event from VMWare Tools everyday
    Error 3:
    WARNING
    Source: VMWare Tools
    Event ID: 1000
    [ warning] [vmvss:vmvss] CVmSnapshotRequestor::CheckWriterStatus():1536: writer DPM Writer in failed state: res = 0x800423f4, err = 0x1, error =
    Has anyone come across this before? Currently I am not quite sure what is going wrong and whether it is actually related to snapshots failing, but I want to try to fix these errors first and see what happens.
    Regards

    Your ar using VMware for Virtualization?
    Are you trying to do an online Backup of the VM, think that will not work?
    One thing i wonder, your have installed second DPM if Site one fails or goes done, but SQL for DPM2 is in Site one? try to move SQL to external site for DPM 2
    Seidl Michael | http://www.techguy.at |
    twitter.com/techguyat | facebook.com/techguyat

  • TREX 7.0 error in event log

    A worker process with process id of '4316' serving application pool
    'AppPool_SAP_TREX_02' has requested a recycle because it reached its
    allowed request limit.
    Hi I'm getting the above error in the system event log on my server. Has anyone seen this before?

    - update TREX and KMC versions and patch levels
    - see SAP note 845974 for recommendations

  • Adobe Air causing error in event log

    I installed Windows 7 64-bit on a system recently.  This morning I installed PS CS4, including Adobe Air.
    I've now gotten 5 of these errors recorded in the event log.
    Source:  SideBySide
    Event ID:  63
    Level:  Error
    Activation context generation failed for "x:\adobe cs4\payloads\adobeamp-mul\adobe air\Versions\1.0\Adobe AIR.dll".Error in manifest or policy file "x:\adobe cs4\payloads\adobeamp-mul\adobe air\Versions\1.0\Adobe AIR.dll" on line 3. The value "MAJOR_VERSION.MINOR_VERSION.BUILD_NUMBER_MAJOR.BUILD_NUMBER_MINOR" of attribute "version" in element "assemblyIdentity" is invalid.
    How do I get rid of this?

    I have had the same issue since  I bought PS-CS4 and Lightroom2.0 back in OCTOBER/NOVEMBER 2009.
    Directly from Windows Event Log:
    EventID 63: Activation context generation failed for "C:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll".Error in manifest or policy file "C:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll" on line 3. The value "MAJOR_VERSION.MINOR_VERSION.BUILD_NUMBER_MAJOR.BUILD_NUMBER_MINOR" of attribute "version" in element "assemblyIdentity" is invalid.
    OS: Windows 7 64-bit
    Considering this ERROR is CONSTANTLY being JACKED into the Event Log, I had hoped that others would be asking Adobe for a solution.  I guess there are just two of us experiencing this problem - I seriously DOUBT that.
    Having DEVELOPMENT experience in several programming languages, it appears there is a SIMPLE error in the DLL file.  PLEASE FIX THIS ASAP!
    As much as we have to pay for this software, I would expect not to have these kind of issues.  Adobe PLEASE RESPOND!!!

  • Active Sync Error in Event Logs - Generated by Health Monitor Mailbox.

    Receiving the event log entry below on an Exchange 2013 Mailbox Server (Server 2012 OS).  No policies have been configured yet.  Seems odd that by default the health mailbox would be blocked when default policy is allow. Anybody else seeing this?
    Log Name:      Application
    Source:        MSExchange ActiveSync
    Date:          10/1/2013 11:59:16 AM
    Event ID:      1021
    Task Category: Requests
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      MYSERVER.mydomain.com
    Description:
    A non-compliant phone is trying to connect with Exchange ActiveSync. However, the Exchange ActiveSync mailbox policy for user [MYDOMAIN\HEALTLMAILBOXACCOUNT] and device ID [EASProbeDeviceId141] requires phones to be compliant before they synchronize with Exchange
    ActiveSync.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange ActiveSync" />
        <EventID Qualifiers="32772">1021</EventID>
        <Level>3</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-10-01T17:59:16.000000000Z" />
        <EventRecordID>136375</EventRecordID>
        <Channel>Application</Channel>
        <Computer>MYSERVER.mydomain.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>MYDOMAIN\HEALTLMAILBOXACCOUNT</Data>
        <Data>EASProbeDeviceId141</Data>
      </EventData>
    </Event>

    Did you find a solution for it? 
    I see the same error on our 4 Exchange 2013 Servers.
    I have not.  I just chalked it up to another broken item with Exchange 2013.  Maybe it will be fixed by next year. 

  • CITADEL and RELATIONAL DATABASE Alarms & Events Logging Time Resolution

    Hello,
    I would like to know how I can setup Logging Time Resolution when Logging Alarms & Events to CITADEL or RELATIONAL DATABASE.
    I tried use Logging:Time Resolution Property of Class: Variable Properties without success.
    In my application I need that timestamp of SetTime, AckTime and ClearTime will be logged using Second Time Resolution, in other words, with fractional seconds part zero.
    I am using a Event Structure to get SetTime, AckTime and ClearTime events and I want to UPDATE Area and Ack Comment Fields thru Database Connectivity but when I use SetTime timestamp supplied by Event Structure in WHERE clause Its not possible get the right alarm record because there are a different time resolution between LV SetTime timestamp and timestamp value logged in database.
    Eduardo Condemarin
    Attachments:
    Logging Time Resolution.jpg ‏271 KB

    I'm configuring the variables to be logged in the same way that appears on the file you send, but it doesn't work... I don't know what else to do.
    I'm sending you the configuration image file, the error message image and a simple vi that creates the database; after, values are logged; I generate several values for the variable, values that are above the HI limit of the acceptance value (previously configured) so alarms are generated. When I push the button STOP, the system stops logging values to the database and performs a query to the alarms database, and the corresponding error is generated... (file attached)
    The result: With the aid of MAXThe data is logged correctly on the DATA database (I can view the trace), but the alarm generated is not logged on the alarms database created programatically...
    The same vi is used but creating another database manually with the aid of MAX and configuring the library to log the alarms to that database.... same result
    I try this sabe conditions on three different PCs with the same result, and I try to reinstall LabVIEW (development and DSC) completelly (uff!) and still doesn't work... ¿what else can I do?
    I'd appreciate very much your help.
    Ignacio
    Attachments:
    error.jpg ‏56 KB
    test_db.vi ‏38 KB
    config.jpg ‏150 KB

  • SBOMail error in event log

    Hello,
    I'm currently having problems with the SBO mailer service using SAP B1 2005A SP01 PL 39. We use the alerts management to run queries every morning and deliver them to the users E-Mail inbox ready for there morning meeting.
    unfortunatly we have found this not to be very reliable as some days certain emails will not be sent for no reason. but our major problem is everytime an E-Mail is sent we get an error in event viewer on the server.
    Type: Error                              Source: SBO Mail
    User: N/A                               Catergory: None
    Computer: SBO Server             Event ID: 62
    Description: Failed to mark records success
    any advice on stopping the error or making email run more consistently would be greatly apreciated
    Thanks
    Marc

    Hello Marc,                                                                               
    Thank you for contacting SAP Forums.                                                                               
    Our first recommendation is to review the details from SAP Note 1179514 ( How to deactivate Data Execution Prevention? ) and follow the suggested instructions.                                                                               
    - Is the issue happening for all users?                                                                               
    - When did the issue start to happen? Is it linked to a Patch/ Version upgrade? 
    - Checked if port 25 is being used by something else.                                                                               
    - Ensure that the SBO Mailer Service is started.                                                                               
    - In Service Manager set the 'connection' DB type to MSSQL_2005. Set the DB Server to the SQL Server Name or IP address of the SQL server to where you want to connect. Set the DB Username to 'Sa' and the DB Password accordingly.                                                                               
    Further suggestions:                                                                               
    - Stop the SBO-Mailer Service.                                           
       Go to Start   >Run   > Services.msc                                   
       A) Change login details for the mailer service to the Domain Admistrator
       B) Restart the service.                                               
       C) Change login details for the mailer service back to local service. 
       D) Restart the service.    done before webex                                                                               
    - The -62 Error is usually caused by network issue/SMTP server issue in many  cases. To find out the root cause of the random -62 error, could you please try to send a e-mail via outlook when -62 error happening and check it works or not?                                                                               
    - In the B1 application go to :                                          
           administration > system initialization > company details >        
           E-mail and verify a valid email address is defined                                                                               
    - Please verify the behaviour when using the administrator account for running the SAP Business One  
    Messaging service.                        
    You can set this account in the Windows Service Manager by right-clicking on the service and selecting "This account" on the logon tab. Please restart the service afterwards.                                                                               
    Hope this could help to solve your issue.
    Juan Manuel Marrero
    SAP Business One Forums  Team

  • Oracle instance terminated with no error in Event Log

    Hi all,
    We are running ASP with VB COM 6.0 via Oracle Service for MTS against Oracle DB 8.1.7.4.1. As we always found the IIS down with error "New transaction cannot enlist in the specified transaction coordinator." in IIS server. At the same time, we found lots of error "Oracle Instance has been terminated" in event logs. However, we didn't find any error in alert log or trace file. Can anyone help to tell what's the instance error?
    Also, we are running oracle client 8.1.7.4.7 and OraMTS 8.1.7.1.0.
    If possible, please also help to solve the error "New transaction cannot enlist in the specified transaction coordinator.".
    Thanks in advance.
    Regards,
    Joyce

    Are you able to get the explain plan of the same statement directly at the sql*plus prompt?
    This could be related to the bug:
    Bug 3043373 : Abstract: MALFORMED EXECUTION PLAN IN V$SQL_PLAN WITH FILTER OPERATIONS
    There is a patch available on top of the 9.2.0.6 version. The bug has been filed on the base data dictionary views in the database. To confirm, I would suggest that you verify the problem from sql*plus first.
    Jaffar

Maybe you are looking for

  • New MacBook fast enough for FCP?

    Will FC Studio run okay on a MacBook 2.16 with 2 gb ram?

  • Unwanted duplicate thumbnails in workspace.

    I just purchased and installed Elements 9. When installingt, the program automatically indexed my photos on the HDDs and created thumbnails in the workspace of the organizer. Problem is that I got duplicate thumbnails for photos residing in different

  • 2010 iMac Ejects Discs After About 10-15 Seconds. Help??

    Hi guys, I just tried to put a DVD into my iMac and it ejects it after about 15 seconds. I tried another DVD and it does the same! Any suggestions? I bought the Mac December 2010 so I no longer have Apple Care. Please say it doesn't need a new drive!

  • ABAP Server Proxies - Fault Handling

    Hello, We use ABAP server proxy to create a PO on an R/3 system. This is done in an asynchronous interface. When the function that creates the PO returns an error we raise a fault in the server proxy. However when this occurs the fault is not passed

  • CO-Products Procees order settlement issue

    Hi Gurus, I've a Process order with Co-Product items my settlement rule says 100% PER to CTR (Cost Center) and 0% for OIT (Order Items). When I try to settle this order instead of posting variances to Settlement receiver it's posting Credit (Goods re