Missing wagetypes during selection by print program with HRFORMS

Hi Folks
we have a problem with selecting wagetypes for the form payslip via the HR-Formular-Workplace.
On the block 'basis dedctions' e.g. we use wagetype '/5B1'. The wagetype is described on the table
strip 'selections' of the block, accordingly.
If we start the form on the HR-Formular-Workplace, this wagetype wil not be selected anyway.
A similar case is in effect on block 'transfers'. We use on this block the wagetypes '/54U' and '/561', only.
Both wagetypes are described on the table string 'selections' identically.
If we start the form on the HR-Formular-Workplace, wagetype '/54U' is printed on the payslip, correctly.
Wagetype '/561' on the other hand is printed never, allthough it appears on the HRDATA subtable
PAY_RESULTS, correctly.
Has anybody an idea were my mistake could be???? Any help is kindly appreciate!
Regards
Dieter Koppe

We have never modified rffous_c before.  Try going to IMG node Financial Accounting --> Accounts Receivable and Accounts Payable --> Business Transactions --> Outgoing Payments --> Automatic Outgoing Payments --> Payment Method/Bank Selection for Payment Program --> Set up payment methods per company code for payment transactions.  Remove the SAPScript form from your payment method.  Then you just have to put your HR Form in your preDME selection.  That way it won't pick up the SAPScript form at all, and it will only use the HR Form.  This way you don't have to change rffous_c code at all.

Similar Messages

  • Syntax Error when generate print program in HRFORMS

    Dear All,
    I created form for payslip using HRFORMS, the name form is ZPS_TPI_01. When I activate the form, the error raised: Generated print program contains a syntax error
    Diagnosis
      Generated print program /PYXXFO/ZPS_TPI_01_PRNT conains a syntax error in line 9 of include /PYXXFO?ZPS_TPI_01_PAYR.
    I have already apply note 878168 but it is not work.
    Please advise me.
    Thank you,

    hi,
    can you let me know for which country  are you trying to generate the HR form for payslip?
    There are certain countries for which payslip isnt supported.
    For such countries you get a similar error.
    Thank you,
    Jose

  • Can't Select Label Print Location With Address Book 3.1.2

    When printing a single address from Address book 3.1.2 on a sheet of mailing labels such as an Avery 5163, the print dialog box puts the address in the upper left hand position and YOU CANT CHANGE THIS. If you've already used several labels from this sheet, you need a way to change the address print position and THERE'S NO WAY TO DO THIS. THIS IS OUTRAGEOUS! My old TouchBase program FROM 1992 allows this easily and will print a return address on the same label as well! Jeez, who's designing these things??????
    Does anybody know of some third party developer who has figured out a way to fix this?

    I have used "Imprint" to solve this and other problems with printing labels and envelopes from Address Book.
    http://macupdate.com/info.php/id/11336
    Though shareware, it is well worth the fee !

  • How to fetch Print program name of a SAP script?

    Hi abapers,
    Could you please tell me how to fetch the name of a script's print program with the help of the script's name?
    I have tried with table TNAPR and T-code NACE,it didnt help.
    Is there any function module that returns the print program's name.
    Please reply.
    Thanks,
    Suchi.

    hi ,
    GOTO SE71 Txn
    Enter standard script name.
    Click on Display.
    "in menu bar
    "form------>Check--->text ----->press enter
    Now you can view the standard print program name
    Thanks & Regards

  • Print programs for (print) interactive forms

    Hello,
    I am looking for an (any) interactive form and the print-program belonging to this form.
    It can be any form from any moudule, as i only need it for testing purposes.
    Thank you!

    Hi,
      My requirement to migrate puchase order smartformto Adobe interactive form.
      I have mgrated my purchase order smartform to Adobe interactive form,
      activated form and interface.
    Question:  How do i trigger or my adobe interactive form purchase order in R/3.
                     I want to trigger the form from me22n -> print privew..
    I have configured in NACE (Output type customization)  with same samrtform print program with adobe form and Type  as PDF. But the adobe form is not trigering at all..  Can any know how do i trigger adobe form from ME22n.
    Is there any special print program for this please let me know..
    thx

  • Smartform to Adobe interactive form and triggering from print program

    Hi,
    My requirement to migrate puchase order smartformto Adobe interactive form.
    I have migrated my purchase order smartform to Adobe interactive form,
    activated form and interface.
    Question: How do i trigger or my adobe interactive form purchase order in R/3.
    I want to trigger the form from me22n -> print preview..
    I have configured in NACE (Output type customization) with same samrtform print program with adobe form and Type as PDF. But the adobe form is not triggering at all.. Can any know how do i trigger adobe form from ME22n.
    Is there any special print program for this please let me know..
    thx

    Hi,
    Change the form entry in NACE , use entry_neu_adobe and that will work.
    Best Regards

  • How to save varaint in a report program with tabstrip in selection-screen

    Hi Gurus,
    We have a custom report program and selection screen of this program has a tabstrip of 9 tabs. This program will run in background job and we are facing problem to save variant for this report program. 
    We saved one variant with 'TAB2' populated. But when we execute the report and select that variant and we are not navigated to 'TAB2' automatically. So, code for TAB2 is not triggerd and we are not getting desired output.
    When we set this program with variant in Job, program is not navigated to 'TAB2' as per variant setup.
    Is there any way to save variant for this kind of report ?
    Please help with your suggestions
    Thanks & Regards
    Chandan

    Thanks for your help.
    I found during debugging that it is holding the sy-ucomm of the first tab as default value.  So, I declared a new field in selection screen with No-Display option. When user will select a tab, this new field will hold the value of that sy-ucomm. As this field is in selection screen, it is getting stored in variant also.
    In start-of-selection of program I am checking this field value and accordingly set the TABSTRIP.
    Thanks again for your help.....
    Regards,
    Chandan

  • No longer able to select a Printer in Print Dialog Box - Windows 7 with CS

    SInce installing Windows 7 I can no longer select a printer in the Page Setup Dialog Box. Instead it always defaults to the default printer. Is there a fix for this?

    You assume too much. I am not mucking around with the iPhoto Library.
    Here is an example of my problem:
    Open Address Book
    Select a Contact
    Click Edit
    Double Click the Photo icon
    A dialog appears for me to "Choose" a photo
    Click Choose...
    Another dialog appears for me to browse to the photo that I would like to attach to that conract
    I select my username under "Favorites", then expand the "Pictures" folder
    When I click on iPhoto Library, I am no longer able to expand it and presented with the photos, events, faces, albums within it, but only get an icon for the iPhoto Library instead.
    This is part of the way a Mac works, and is now broken. It exhibits this in Address Book and any other program, and it was working fine until I installed PSE 10.

  • Problem Exporting / Importing print forms with program RSTXSCRP

    Hi!
    there is problem Exporting / Importing print forms with program RSTXSCRP.
    when I transfer print form from one SAP system to other, logo image and some text is missing... what could be the reason?
    Maybe there is other way to transfer print forms between SAP systems without using program RSTXSCRP?
    Will reward,
    Mindaugas

    Hi,
    when you transfer print forms from one sap system to another, logos are not transfered automatically. these are actually .bmp files which need to be existing in every client. then only when you run your print program logo can be seen in your print output. hence logos need to be created explicitly in every client where you want to run your print program.
    thanks,
    sksingh

  • Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened an

    Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."  Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!

    I cannot get any help either.  I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."  I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning).  There appears to be no path to a solution.  I have read all the forums and tried about 20 different suggestions all to no avail.  Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL.  On a macbook pro retina with 10.10.3.  This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd.  I have yet to be able to print from CS6 any more.  This is a show stopper and my patience is wearing thin.  And I'm tired of stupid questions like "is your printer powered on?" give me a break.  This appears to be an adobe photoshop cs6 problem - as I can print from every other application.  Anyone have any ideas?  Adobe should have something?... Adobe system  info below:
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
    Operating System: Mac OS 10.10.3
    System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2300 MHz
    Built-in memory: 8192 MB
    Free memory: 4665 MB
    Memory available to Photoshop: 7059 MB
    Memory used by Photoshop: 70 %
    Image tile size: 1024K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
    OpenCL Version:
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
    Display: 2
    Display Depth:= 32
    Display Bounds:=  top: 1072, left: 140, bottom: 1950, right: 1580
    Video Renderer ID: 16918311
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
    OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1050, right: 1680
    Video Renderer ID: 16918311
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    Serial number: 92629107631240972642
    Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      KerrysHD, 232.6G, 19.7G free
    Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
    Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
    Additional Plug-ins folder: not set
    Installed components:
       adbeape.framework   adbeape   3.3.8.19346   66.1025012
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
       adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
       AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
       AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
       AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
       AdobeCrashReporter.framework.framework   AdobeCrashReporter   6.0.20120201  
       AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
       AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
       AdobeLinguistic.framework      17206  
       AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
       AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
       AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   6.0.0.1654  
       AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
       AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
       AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
       ahclient.framework   ahclient   1.7.0.56  
       aif_core.framework   AdobeAIF   3.0.00   62.490293
       aif_ocl.framework   AdobeAIF   3.0.00   62.490293
       aif_ogl.framework   AdobeAIF   3.0.00   62.490293
       AlignmentLib.framework   xcode   1.0.0.1  
       amtlib.framework   amtlib   6.0.0.75  
       boost_date_time.framework   boost_date_time   6.0.0.0  
       boost_signals.framework   boost_signals   6.0.0.0  
       boost_system.framework   boost_system   6.0.0.0  
       boost_threads.framework   boost_threads   6.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.0.5.19287   145486
       data_flow.framework   AdobeAIF   3.0.00   62.490293
       dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0  
       dvacore.framework   dvacore   6.0.0.0  
       dvamarshal.framework   dvamarshal   6.0.0.0  
       dvamediatypes.framework   dvamediatypes   6.0.0.0  
       dvaplayer.framework   dvaplayer   6.0.0.0  
       dvatransport.framework   dvatransport   6.0.0.0  
       dvaunittesting.framework   dvaunittesting   6.0.0.0  
       dynamiclink.framework   dynamiclink   6.0.0.0  
       FileInfo.framework   FileInfo   66.145433   66.145433
       filter_graph.framework   AdobeAIF   3.0.00   62.490293
       hydra_filters.framework   AdobeAIF   3.0.00   62.490293
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       image_compiler.framework   AdobeAIF   3.0.00   62.490293
       image_flow.framework   AdobeAIF   3.0.00   62.490293
       image_runtime.framework   AdobeAIF   3.0.00   62.490293
       LogSession.framework   LogSession   2.1.2.1652  
       mediacoreif.framework   mediacoreif   6.0.0.0  
       PlugPlug.framework   PlugPlug   3.0.0.383  
       UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
       wrservices.framework        
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

  • My printer crashed mid printing photo.  Printer works OK in other apps.  Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any

    Ooops I put the lot in the strap line!
    My printer crashed mid printing photo.  Printer works OK in other apps.  Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
    I would be grateful for help!!  Obviously...

    Probably best to ask in Photoshop General Discussion
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I can access a website and select the 'print' option but the print misses out

    I can access a website and select the 'print' option but the print misses out photos that should be included in the print. It happens on more than one website. If I use Explorer it doesn't happen. I guess there must be a setting or something that I have not found? Any help very gratefully received. Than you.

    I don't know if this will help, but I found it by accident. When I send Word projects to recipients, it doesn't always read properly depending on their format. If they have a PC It distortes my  program, or they may have newer versions of Word. If you have your document showing select 'print' and on my print menu at the bottom left corner it has a button that says 'PDF'. Click on that and it gives you several options for a PDF. What I do if I'm emailing to someone is select the email option then you can always print from the email. Hope that helps.
    jr

  • Problems with SAP Script print program

    Hi,
    I have the following scenario:
    I have a workflow which prints a sapscript with data stored in the workflow container.
    The workflow method 'executeform' populates a selection table and submits it to the print program using:
    SUBMIT ZPRINT_FORM WITH SELECTION-TABLE sel_table
    This print program then populates the form with data and calls the OPEN_FORM/WRITE_FORM/CLOSE_FORM FM's.
    My problem is that some of the variables in the workflow container are CHAR255, when these get moved to the selection table (seltab-low) they get truncated as seltab-low is a CHAR45.   Is there a way round this??
    This is the first time I have used sapscript, I notice that the variables printed on the form correspond to the parameters defined in the Print Program.  I assume therefore that this is why the
    SUBMIT ZPRINT_FORM WITH SELECTION-TABLE sel_table
    has been used and why the OPEN_FORM/WRITE_FORM/CLOSE_FORM was not coded directly in the workflow executeform method.
    Any guidance on how to proceed with this would be appreciated.
    Many Thanks,
    Paul

    Hi Paul,
       In general, in the statement
    SUBMIT ZPRINT_FORM WITH SELECTION-TABLE sel_table.
    sel_table is an internal table with the structure RSPARAMS.
    This variant allows you to set the names and contents of the parameters and selection options dynamically at runtime.
    You can use the function module RS_REFRESH_FROM_SELECTOPTIONS to read the contents of the parameters and selection options of the current program into an internal table seltab with the structure RSPARAMS. By using SUBMIT ... WITH SELECTION-TABLE seltab, you can then pass these values on directly.
    The work around for the variables that cannot be passed using the submit statement, can be exported to Global memory ids and the same can be retrieved in the print progra.
    The syntax for the export and import statements is something like this.
    TABLES INDX.
    TYPES: BEGIN OF ITAB3_TYPE,
              CONT(4),
           END OF ITAB3_TYPE.
    DATA: INDXKEY LIKE INDX-SRTFD VALUE 'KEYVALUE',
          F1(4), F2 TYPE P,
          ITAB3 TYPE STANDARD TABLE OF ITAB3_TYPE WITH NON-UNIQUE
                     DEFAULT KEY INITIAL SIZE 2,
          WA_INDX TYPE INDX.
    Fill the data fields before CLUSTR
    before the actual export
    INDX-AEDAT = SY-DATUM.
    INDX-USERA = SY-UNAME.
    Export der Daten.
    EXPORT F1    FROM F1
           F2    FROM F2
           ITAB3 FROM ITAB3
           TO DATABASE INDX(ST)  FROM WA_INDX ID INDXKEY.
    *********************************************************TYPES: BEGIN OF TAB3_TYPE,
              CONT(4),
           END OF TAB3_TYPE.
    DATA: INDXKEY LIKE INDX-SRTFD,
          F1(4), F2 TYPE P,
          TAB3 TYPE STANDARD TABLE OF TAB3_TYPE WITH
                    NON-UNIQUE DEFAULT KEY,
          WA_INDX TYPE INDX.
    INDXKEY = 'INDXKEY'.
    IMPORT F1   = F1
           F2   = F2
           TAB3 = TAB3 FROM DATABASE INDX(ST) ID INDXKEY
           TO WA_INDX.
    Regards,
    Ravi

  • Associate Print Parameters with Program Variant

    Is there any standard way to associate a particular set of print parameters with a program variant?

    i think it is possible ? try to make use of
    <b>
    Selection Variables
        The following three types of selection variables are currently
        supported:
        o   Table variables from TVARVC
            You should use these variables if you want to store static
            information. TVARVC variables are proposed by default.
        o   Dynamic date calculations:
            To use these variables, the corresponding selection field must have
            type 'D' (date). If the system has to convert from type T to type D
            when you select the selection variables, the VARIABLE NAME field is
            no longer ready for input. Instead, you can only set values using
            the input help.
            The system currently supports the following dynamic date
            calculations:
            Today's date
             From beginning of the month to today
             Today's date +/- x days
             First quarter ????
             Second quarter ????
             Third quarter ????
             Fourth quarter ????
             Today's date - xxx, today's date + yyy
             Previous month
         o   User-specific variables
             Prerequisite: The selection field must have been defined in the
             program using the MEMORY ID pid addition. User-specific values,
             which can be created either from the selection screen or from the
             user maintenance transaction, are placed in the corresponding
             selection fields when the user runs the program.
         The SELECTION OPTIONS button is only supported for date variables that
         fill select-options fields with single values.
    </b>
    but thing is u have to maintain para/selection options for ur report.
    Regards
    Prabhu

  • Problems with Print Program of Production Order (CO03) !!

    Hi all,
      I have a question about Print program of Production Order. I created a new Order in CO01. Then, in CO03, I call Print Program ( menu <b>Functions >> Print</b>). At the first time, it printed a so-called original version. Later, when i printed it again, it informed me that just was a copy. Now, that's ok.
    I made some modification of Print Program by copying and changing the code (let's call it Z_PSFCOBJL) and SAPScript form. However, When I call Print function in CO03 for that Order, it didn't show any changes which I made. What's wrong? I checked in the code by debug mode, the variable that I transfered to the form was correct with its value.
    <b>I think that because SAP just make a print copy so that it will not reflect any changes that I made to the program, right? Is there any way to overcome this because I don't want to create new Orders just for testing every modification</b>?
    Thank you in advance.

    Hi MURUGESAN THANGATHURAI  ,
        Yes, I did assign the new program and new form for this before printing. But I wanna know if there is any way that allows me to view those changes I made?
    When I change the code in Print Program, print-out includes this update (although it still informs me that is a copy version). But when I make changes in the SAPScript form (for example, adding a variable for display), <b>it will not update this</b>?
    What's problem?
    Thank you guys.

Maybe you are looking for