Missing Waveform Monitors - New Install, Most Recent Premiere CC 2014

Hi,
I recently downloaded and installed Premiere Pro CC and related apps with a cloud subscription on a new Mac Pro tower. I connected by working RAIDs and opened a PPro project originated on my previous edit system, an iMac.  Right away I noticed some strange behavior and key features missing when I went to color correct my footage.
With the desired timeline active in the "Editing" workspace, I used the keyboard shortcut (I also tried this with the dropdown menu) and switched the workspace to color correction. Rather than the timeline activated in the "editing" workspace, a completely different timeline in the project appeared in the "color correction" space. This occurred multiple times with seemingly every timeline, but the one I desired to correct activating in the "color correction" space.
Also, the waveform monitors are absent from both the reference and program viewer menus. I can't seem to the find them anywhere. This leaves me feeling a bit crazy, as I was operating in the most current PPro CC version on the iMac just yesterday and everything was in its place.
Thoughts on what  is going on here?
Here are my system specs:
Mac Pro
Yosemite 10.10.1
Processor: 3.5 GHz 6-COre Intel Xeon E5
Memory: 32 GB 1886 MHz DDR3 ECC
Graphics: AMD FirePro D700 6144 MB
For now I suppose, I'll try uninstalling and re-installing the app. Other ideas? Anyone else experiencing this?
Lindsay

Thank you for all of the feedback. I have tried un-installing and re-installing twice now. Once using the cleaner tool and once without. Neither has remedied the problem. I was sure to check "Remove Preferences" when performing the un-install, but when I opened a new project after the re-installation, PPro opened in the "Color Correction" workspace rather than opening in the standard editing workspace and still no scopes.
Other ideas?
I found this thread, which isn't boosting my confidence in a healthy Premiere / Mac Pro relationship, but I have seen no mention of the missing scopes issue I am experiencing. And really I haven't progressed to the point of attempting an export or render. As you well know, scopes are vital, and there's no point exporting if I can't properly polish a product.
Premiere Pro CC and the New Mac Pro (2014)

Similar Messages

  • Plugins + Mediacore disappear after most recent Premiere CC 2014 update?

    Just updated to the most recent version of Premiere and when I loaded a project, I found that all of my plugins had disappeared. Thinking it was just a Mediacore issue, I went to Library/Application Support/Adobe/Common/Plug-Ins and found that my 8.0 folder was missing! And more than that, almost all of my plugins (Red Giant, Twixtor, FilmConvert) were missing from the 7.0 folder!
    Any idea of what's going on and what I can do to fix it?
    **EDIT/UPDATE:
    Anticipating that I might be instructed to re-do my search for the mediacore by starting at Macintosh HD (Instead of user library), I found an interesting (but unhelpful) difference from when I started at my user Library - I also found my plugins folders for CS5 Through CS6, which contained all of my plugins.
    The 7.0 folder was still empty, and the 8.0 folder was still missing. See screenshots:

    Sort of found a fix:
    - Simply moved everything from my CS6 Mediacore into the 7.0 Mediacore, and that put all of my plugins back into CC 2014.2
    - Had to reinstall FilmConvert, which isn't too bad, but it's annoying that I have to update all of my RedGiant plugins again. May as well reinstall everything.
    It's weird how the 7.0 folder now communicates with CC 2014.2, and its super inconvenient that it basically got rid of all my plugins post-CS6. Luckily just reinstalling to the 7.0 seems to work.

  • Installing most recent print driver for Epson Pro 3800

    I like to make sure that I use the most recent print driver for my Epson Pro 3800.
    So I downloaded the driver "epson 328233 eu.dmg" and it shows up in "Finder downloads"
    * I assume that this driver is the most recent one?
    I have no idea how to continue to replace the existing driver and how to install the latest driver?
    * Do I have to remove the present driver? If so: how do I find the old driver and how do I remove this driver?
    * Thereafter in what way do I install the new driver?
    I am far from a software specialist and I recently switched from PC to iMac which is still troubling me!
    Thank you for helping me!
    Harry

    Dear Sig,
    Thank you for your answer which solved my problem.
    I had the imprerssion that in Mac some downloads are installed automatically and some are not?
    But this might be a wrong observation and is installing always necessary?
    Harry

  • Help installing most recent flash on Firefox...

    I have the latest version of Firefox, and am trying to download the most recent version of Adobe Flash.
    I have checked all of the help provided, and decided to come here before paying for a phone call I shouldn't have to make.
    Every time I try to install the flash player (and only the flash player), a box appears at the top of the browser that says I have to install missing plugins. I have no other option, as nothing else comes up. Just that box. When I click on the install missing plugins box, it says it couldn't find any, and asks me to do it manually, so I do. Then it downloads something, and says it can't be found, so I have the option of browsing my computer (which I don't do, since I don't have anything that can fix it), or using the web to find the correct thing to open the file. When choose that, it says there isn't one in existence.
    Plus, it doesn't help that all of the images offered for help on the site are from a Firefox version from like, two years ago.
    I seriously, SERIOUSLY need to get this installed, because all of my homework for a class is done through a web thing that requires Adobe Flash.
    So... has anyone encountered this, and can anyone help?
    Thanks in advance.

    Hi, A couple of questions. Are you the Administrator and are you using that Account?
    Please post back your operating system, browsers used and versions.
    Go to this test site and test Each browser. You should be able to see the animation of the Flash logo, let me know on that.
    Also this site will tell you what version of Flash Player that you now have.
    http://www.adobe.com/software/flash/about/
    Thanks,
    eidnolb

  • "Mobile Device helper has stopped working" after installing most recent

    OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
    After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
    _*Steps I have taken :*_
    I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
    *The two messages that I continue to get when I open iTunes and connect my phone:*
    1) "Mobile Device helper has stopped working"
    2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
    The most recent error message under "Problems Reports & Solutions" on my start menu read:
    Product: MobileDeviceHelper
    Problem: Stopped working
    Date: 4/7/2010 3:42 PM
    Status: Not Reported
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: AppleMobileDeviceHelper.exe
    Application Version: 16.691.14.1
    Application Timestamp: 4ba3b8fe
    Fault Module Name: CoreFoundation.dll
    Fault Module Version: 1.550.17.21
    Fault Module Timestamp: 4b8cb530
    Exception Code: c0000005
    Exception Offset: 0000db6b
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    This is the same message that I have received the last 10 times under Mobile Device Helper.
    *Please PLEASE please*, does anyone know how to resolve this problem?
    *Thank you SO MUCH for any insight.*
    -signed, UGH!!!

    Hi,
    I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
    I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
    Really frustrating and disappointing.

  • Upgraded to most recent ID CC 2014 version and now my Export Options are missing

    I'm on a Mac running 10.10.2 and when I hit EXPORT, I used to see Option for Interactive PDF, Print PDF, JPG etc. Since I installed the latest ID CC 2014 this option is just gone. I rebuilt my prefs and it didn't help, no option.

    Based on that answer, it looks like you have to reinstall InDesign from a new download. Had  issues with updates to Premier and Illustrator on the last set of updates to CC 2014. I restored those from my TM back-up and haven't bothered to update again. Hard to lose hours of production to work around the problems with incremental updates.

  • New iMac Retina for Premiere CC 2014

    Hi everyone,
    we're ready to upgrade a couple of PCs here at the studio and I think we are probably jump over to the Mac wagon. We love the idea of getting the new Retina iMacs (maxed out) with i7 4.0GHZ and 32 RAM, flash storage.... There are a few considerations on top of performance like compactness, portability and yes...design. There are however a couple of questions:
    - Will the iMacs excel in editing HD footage with Premiere CC 2014, we need them to edit like a hot knife cuts through butter
    - In terms of editing with external hard drives, is USB 3 a good idea until we can afford some Thunderbolt drives?
    - I read the new iMacs will come with AMD graphic cards so I guess they wont be able to use the CUDA Mercury engine?
    thanks for your help,
    Guille

    The Mercury Engine can use OpenCL in Radeon cards. That being said, the R9 M290X is not in the list of currently supported cards, and therefore the Mercury Engine should default to Software Only.
    Adobe won't add the R9 M290X to the list of supported cards until they can fully test it. So hopefully they will add it in a future update (*fingers crossed*).
    Until then, you may be better off with a maxed out 27" iMac which has the GeForce GTX 775M, which is supported. It will no doubt perform better, and yes it will be like a hot knife through butter.

  • Exchange 2013 SP1 database missing?? New install of Exchange 2007 co-exist

    Hi all,
    Finally got Exchange 2013 SP1 installed except I am not so sure I have a database. This is installed on a Server 2008 system and is co-existing with Exchange 2007.
     When I go to SERVERS and DATABASES I don't have anything listed. When I click SERVERS on the left hand pane and SERVERS at the top I see both servers, 2007 and 2013. But when I double click my new Exchange Server 2013 name I get the error:
    The operation couldn't be performed because object '*\ExchangeServerName' couldn't be found on 'FirstDCName.mydomain.com'
    Why would I get this error? The install itself was problematic so I am concerned something is broke.
    Thank you in advance.

    Hello,
    Firstly, I recommend you check if the server name "*\ExchangeServerName" exists on DC via ADUC (select Computers).
    Secondly, please run the get-exchangeserver | fl name cmdlet to check your exchange server name.
    And then please check the exchange setup log to check if the exchange 2013 server is installed successfully. If not, please check if there is any error in setup log.
    If you have any feedback on our support, please click
    here
    Cara Chen
    TechNet Community Support

  • New Install Crashing of Premiere Pro CC

    I've read several posts on this topic and tried following the advice. Windows 7. 64 bit. Dell Precision M6600 with Intel Core i7 vPro. All drivers updated. Installed Premiere Pro CC twice. Still having a crash on startup problem with the follwing report:
    Problem signature:
      Problem Event Name:    BEX64
      Application Name:    Adobe Premiere Pro.exe
      Application Version:    7.2.2.33
      Application Timestamp:    532c3999
      Fault Module Name:    amdocl64.dll
      Fault Module Version:    2.4.595.10
      Fault Module Timestamp:    4eefa829
      Exception Offset:    0000000000361cc8
      Exception Code:    c0000417
      Exception Data:    0000000000000000
      OS Version:    6.1.7601.2.1.0.256.48
      Locale ID:    1033
      Additional Information 1:    f2ff
      Additional Information 2:    f2ffa275bed653201935179f6f7d7368
      Additional Information 3:    5070
      Additional Information 4:    5070e2023e911ec53dcc55cbe3ca5c17

    Hi Acx_gd,
    See if this forum post helps you out: http://forums.adobe.com/message/5677425#5677425
    Thanks,
    Kevin

  • Difficulty installing most recent iOS 8.1.1 update

    I am attempting to install the latest iOS 8.1.1 update on my iPad2.  The error I receive is "Unable to Install Update  An error occurred installing iOS 8.1.1".  I have tried restarting and clearing additional storage space without success (I have 5.2 GB available).  Suggestions?

    Hi Just make a bit more space, to 5.8G aslo Turn your Blue tooth, off You wiil get most of the space back after update. try a Reboot press & hold power button & menu button. Hold both, down, until, you see Apple  Logo. Cheers Brian

  • Everytime I try to download and instal most recent firefox, installer freezes

    I keep getting a pop up saying that a new version of firefox is available, i click ok to download and install and the status freezes and never completes, so I have to forcequit. I have an imac OZx10.7.1 and am currently using firefox 6.0.1

    It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
    Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    See "Disable virus scanning in Firefox preferences - Windows"
    * http://kb.mozillazine.org/Unable_to_save_or_download_files

  • Possible software or hardware issue (have installed most recent drivers)

    I have the FX5200 personal cinema and I must say that this is, without doubt the most troublesome card I've ever installed. This includes all manner of boards in the past and many rebuilds over the years.
    I managed to solve my nvidia remote problems by doing a completely fresh XP install. Having stated that I had gone through and read the stickies (AND tried their advice AND searched the forum for other posts) I was surprised that no one could/would help.
    Having sorted out the other issues (remote usb now recognised, remote control functioning etc.) I am left with perhaps the most frustrating of all - NO SOUND with DVR
    NOW, I HAVE read the stickies regarding this, installed my board properly and even connected all of the cables from the breakout box. I am a semi-professional musician, so I know about soundcards and I am experiencing a strange problem.
    I can get sound great on the other bundled apps but DVR won't even let me raise the volume with its software slider (on the console) or by using the remote (which works with everything else).
    At first I thought it could be due to poor reception - no sound channel being picked up - but I don't believe that this is the case because I used the same aerial with a portable TV and it worked great.
    Is this a software issue? Or has the software decided that I am not worthy of having any sound on my TV? Or has it discovered a problem that none of the other apps have and not letting me control the volume is its way of telling me that there is something wrong?
    I have installed all of the latest software and WDM drivers from the nvidia website, so please don't ask me to do this again. If it helps, my version of the FX5200 PC is the one with the heatsink, not the fan.

    Hi there.. now im not Sure this is the only solution for you but i can say that  Upgrade versions of xp.. {and ive installed a bunch at work}  are NEVER  as stable  as a clean install of XP pro. this is my personal experience , and honestly.. im not THAT bad of a tech,, when making Vid boxes for CausinFX {latest company ive done a build for} the owner wanted to migrate and do an upgrade of his MAYA stations and one SGI workstation..  well the misery went on for a week.. Change this part.. not compatible with that part.. finally he went and got a copy of XP Pro with 10 Mips..  problem solved in about 9 hrs after installing..
    Not  neccassarily your problem specifically but it sure Smelled like  mine...
    good luck

  • B75MA-E33 - long time to post after installing most recent bios update

    I installed the bios update from the product page for this motherboard and flashed it directly from the utility within the bios.  It installed fine, but after installing this update the post time has increased from about 10 seconds to anywhere between one and five minutes.  It sits on the screen with the "A2" code in the bottom right corner before loading the msi splash screen.  I searched the forum but didn't see anyone else reporting this.  Anyone have any idea what's causing this?  I verified that the settings in the bios haven't changed.

    Quote from: flobelix on 02-March-13, 22:59:41
    Solution? Thanks? This is not your thread. Topic starter has been asked to post system details.
    I guess you misunderstood my post.What I was that I have a similar motherboard and I was planning on updating the BIOS.He reported about this issue and I'm thankful to him for that.

  • How can I add new lumetri looks to Premiere Pro 2014?

    I just downloaded some great new Lumetri looks, created for SpeedGrade, which I'm currently not using [much].
    Since Premiere Pro now comes with a default set of Lumetri looks in the Effects panel, how would I go about importing these new effects for use in Premiere Pro?
    I did find the /Documents/Adobe/Lumetri folder, but it doesn't have the actual Looks in it--just a user settings XML file. I searched for the names of the presets but didn't find them.
    I also tried to add a New Preset or Custom Bin, but then couldn't figure out how/what to import.
    Anyway, I'd love to be able to use these looks, right in Premiere Pro. Any advice?
    Thanks in advance. Running Mavericks OS.
    PS. The link for download is http://digitalfilms.wordpress.com/2014/05/24/speedgrade-looks/, if anyone is interested.

    Hi,
    If you choose export "movie" that is all AVI ....go lower to what you see here and you get lots of options...make sure video panel is active or the choices will be greyed out

  • Can I purchase the most recent version of Indesign for 1 flat fee?

    Please help

    The most recent version (CC 2014) is available by subscription only. If you want to purchase a perpetual license, your only option is CS6.

Maybe you are looking for