Missing white apce and new lines in pdf report output

Ive set up an XSL template to organize the output of a query. The output is missing the new lines and whitespace. I have to believe this is due to the template since the same output viewed in a form is correct. In another thread I have seen that "* {white-space: pre}" is required. Can anyone elaborate on this?

OK, thanks. I must say I've found getting my feet wet with SQL Developer quite a frustrating exercise. I've been using Toad for the last 7+ years and having recently migrated my desktop from Windows to Linux I needed to find a replacement (yes I know about VMWare, Wine, etc but I want to get away from Windows completely if possible).
SQL Developer is a good start, but IMO there are still plenty of rough edges that need knocking off. Maybe I've been spoilt by Toad - and in particular the Toad development team through their support on the mailing lists, but I don't see the same level of support here by the Oracle development team.
Anyway, enough grumbling. Back to work :-)

Similar Messages

NEW CELL and NEW LINE

Hi,
I am not clear about NEW CELL and NEW LINE in The Main window -> Table -> Footer -> Output options -> Output Table. Could any one help in explaining exactly what is the purpose of it.
Thanks
Ram

when you are placing a text element, you need to specify whether you want this text element to be displayed in the next cell of the table. If the text element is to be displayed in the next line then you will have to check that as well. So, if you are displaying a list of fields in a row format then for the first field, you check both line and cell and for the rest of the fields you check just the cell.
Regards,
Ravi
Note - Please mark all the helpful answers

B2CBasket- Sales Order How to add Vendor partner and new line item of SO

Hi,
I want to add the following BEFORE the sales order creation process starts:
Add a VENDOR partner
Add a new line item to ORDERADM_I
I suspect in BADI CRM_ISA_BASKET_ITEMS and CRM_ISA_BASKET_HEAD. I have user 'HEAD' to add extension fields but cant figure the creation of NEW partners and NEW line item.
regards,
Dave

Thank you for feedback Shantoor,
The CRM_ORDER_MAINTAIN need not be called as this FM is called immediately following almost all of the CRM_ISA_* BADI's.
For clarification I just want to expand on the solution..
In all of these BADI's SAP uses the CT_INPUT_FIELDS parameter. This is where you should enter WHICH fields you have made changes to in the exit. CRM_ORDER_MAINTAIN uses the same parameter.
However the challenge is .. WHAT do you enter in the CT_INPUT_FIELDS. This is where you have to follow a strategy. I yused the following:
1. Looked where the structure was used in programs/class to see how SAP used it
2. Set breakpoints at the call of the BADI. Check what CT_INPUT_FIELDS content is (SAP uses same technique)and try and replicate for your new entries.
I hope this helps those that, like me, battled a bit with the use of these BADI's.

How to provide space and new line to the text in AI Script

how to provide space and new line to the text in AI Script

?? can you explain better, can you at least add another sentence?
space
var mySpace = " ";
new line
var newLine = "\n";

File sender - carriage return and new line as endseparator

Hi All,
I'm stumbled with a problem to set carriage return and newline character as the endseparator (record delimiter)
Scenario: The input file PI is receiving has got few fields which has text in it and the content in this text has got newline characters. So to identify record separator, at the end of each record the combination of carriage return and new line is added.
In file sender content conversion I've set the folllowing parameters to achieve this:
Row.fieldSeparator : , (comma)
Row.endSeparator : '0x0D''0x0A'
Problem: In my sample input file, the first row has a text field with a newline character. When executed PI is splitting the record at the newline character in the text field (instead of combination of carriagereturn and newline which is set in the endSeparator paramter).
Pls advice on how to resolve this .
Happy Holidays!!
amar

Rajesh..Thanks for your quick response
I'm trying with the actual file being provided by the trading partner. I did not generate the file nor changed the file..
Before identifying the combination of carraige return and new line, the adapter is splitting the record when encountered with new line character within one of the text fields.
As you said it worked for you, you do have new line characters within fields in a record?..pls throw some light..let me know for any information..
Thank you
amar--

How to remove new line character from query output?

Hi,
How to remove new line character from query output?
have tried select replace(column_name, CHR(10), ' ') from table_name.
Edited by: GreenHorn on Sep 11, 2008 12:53 AM

Please consider, that windows uses a sequence of chr13||chr(10) Unix uses only one character chr(10).
The new line character(s) may be OS-dependent.
You could consider both with:
replace(replace(column_name, CHR(13)||CHR(10), ' '),CHR(10),' ')
Hartmut
Edited by: hartmutm on 11.09.2008 01:32

Characters are cut off when they don't fit in the pdf report output.

Hi All,
I understand that Forms 6i and Oracle 9 iAS have been de-supported for years. Meanwhile we do still run a small application in the 9 iAS environment.
We have forms and reports running on Windows 2000 server, I am able to successfully clone the same 9 iAS from Windows 2000 to a Virtual Server Windows 2003 x32 and all runs fine, the only problem is that the fonts in the pdf reports are larger in the new Windows 2003 environment as compared to the original Windows 2000 and characters are cut off when they don't fit in the pdf report output in 2003 env.
Any advice is most appreciated.
Thanks.

You may want to check on the printer driver and paper size selected

Adding a new field to VA05 Report output

Hi All,
Please suggest what's the best method to add the new field in the report output of VA05 this can be done in 2 ways one way is by writing the code in theUser exit PERFORM MOVE_USERFIELDS or copy the whole program to Zprogram and write the Code?Ist one need access key but the the other method is not required.
Please suggest me the best method
Thanks&Regards
Mahesh

Hi Mahesh,
i'm in the process of making a similar change,
copying to a ZPROGRAM is not so difficult, but as i told you you have to add your new field to VBMTV structure, and copy the includes that you need to change,
P.S. Note, when you copy you have to change some SELECT statements where
it's selecting from T180V table based on sy-repid, you hav to change sy-repid to SAPMV75A, as there's some configuration done for this.
Regards,
Raghavendra

My code not give error nut not give pdf report output

hi master
sir see my code not give error nut not give pdf report output
String reportSource = "./WEB-INF/reports/mfa.jasper";
String reportDest = "./reports/mfa1.html";
Connection conn = null ;
Statement msqlStatement = null ;
ResultSet mrs = null ;
Connection mconn = null ;
ExternalContext econtext = getExternalContext();
InputStream stream = econtext.getResourceAsStream(reportSource);
if (stream == null) {
throw new IllegalArgumentException("Unknown report name '" + reportSource
+ "' requested");
try {
String mfat = ac_categoryDataProvider.getCachedRowSet().getDataSourceName();
javax.naming.Context mctx = new javax.naming.InitialContext() ;
DataSource mds = (DataSource)mctx.lookup(mfat);
Connection mcon= mds.getConnection();
mcon.setAutoCommit(false) ;
JasperPrint jasperPrint = null;
//getSessionBean1().getTripRowSet(),
//getSessionBean1().getAc_categoryRowSet(), mfat getSessionBean1().getAc_categoryRowSet()
jasperPrint = JasperFillManager.fillReport(stream, null,mcon);
JRExporter exporter = null;
HttpServletResponse response = (HttpServletResponse)econtext.getResponse();
FacesContext fcontext = FacesContext.getCurrentInstance();
exporter = new JRPdfExporter();
exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
exporter.setParameter(JRExporterParameter.OUTPUT_STREAM,
response.getOutputStream());
exporter.exportReport();
fcontext.responseComplete();
} catch (Exception ex) {
log(" Error Description" , ex);
error("Error counting rows: " + ex.getMessage() );
error("Error counting rows: " + ex );
please give me idea
thank's
aamir

Thanks Sven.
The query works but the other way. The output is for all the targets, not for the respective target which we select from :p1_target.
select target_name,target_type, column_label,
warning_threshold,critical_threshold,occurrence_count
from sysman.MGMT$TARGET_METRIC_SETTINGS@crmodem
where target_name in (select MEMBER_TARGET_NAME from MGMT$TARGET_FLAT_MEMBERS@crmodem
where upper(AGGREGATE_TARGET_NAME) like '%X' || :P1_TARGET || '%')
Thanks again.

Functionality for Select and Save layout in a report output

Hi,
I had developed a report program containing several fields in the output and requires the Functionality for Select layout and Save layout in a report output.
Please suggest.
Thanks,
Shariq.

While calling the FM for List Display ( "REUSE_ALV_LIST_DISPLAY" or "REUSE_ALV_GRID_DISPLAY" ) set the Parameter I_SAVE for Setting the Layout and Selecting a different Layouts.
The possible values for I_SAVE are "A", "U", "X" or others. Depending on the requiement you can set different values for the Parameter I_SAVE.
' ' = display variants cannot be saved
Defined display variants (e.g. delivered display variants) can be selected for presentation independently of this flag.
Changes can not be saved.
'X' = standard save
Display variants can be saved as standard display variants.
User-specific saving is not possible.
'U' = only user-specific saving
The user can only save display variants user-specifically
'A' = standard and user-specific saving
The user can save a display variant user-specifically and
as standard display variant. The user chooses in the display variant
save popup.
Reward points if helpful.

CS2 Indesign doc - Tables have uneven thick and thin lines - made PDF - on screen some white out

Using CS2 Indesign. Doc about 100 pages with numerous tables. The lines inside the tables is uneven although I have changed the stroke size to be consistent. Once it was made into a PDF Acrobat 9 it looked much worse on screen. Uneven lines and some lines actually whited out. Really out of time trying for a solution - with an important deadline. Anyone have any experience with this?

How does it print? You can't always judge line width on screen.
Bob

Tab And New Line in XML data

I have a formatted text which I store as a text node. By default the new line char's are converted into white spaces. I read elsewhere on this forum, that we should use the charecter entity reference equivalent &#A; for new line. I did not understand this idea clearly, so I tried this out:
In my formatted string, I replaced all instances of '\n' with '&#A;'. I create my text node as follows:
script.replaceAll("\n","&#A;");
scriptElement = document.createTextNode(script);
As expected when the XML is written the &#A10; is further encoded into "&#A10". And when I read back my XML from the parser, I get my string back with all the "&#A10;". I again need to do a replace all to get the new line charecters back.
My question is : Is there any other standard solution to this problem or the bottom line is to replace the new line and tabs with "MUMBOJUMBO" or a standard charecter entity ref and look for the same while reading back.
Is there anyway I could tell my XMLwriter to convert '\n' into "&#A;" and get back '\n' when I parse the XML?

by default, all white spaces collapse: http://www.w3.org/TR/xsl/slice7.html#white-space-collapse
you can use xml:space="preserve" in your XML elements (tags) or
you can use <fo:block white-space-collapse="false" linefeed-treatment="preserve"> in XSL if you use XSL to format the XML.

Enter Text in Multi Line TextBox and New Lines

Hi Guys,
I have a form that takes a users input and saves to an access
database.
The data is in turn drawn by a recordset and displayed on an
ASP page using VBS.
The form that takes the info has 1 textbox thats multi line
and I want it to be a simple input box except when the user adds a
line break by hitting return I want this to be reflected when the
record is drawn to the detais page..
Just now no matter how many times I hit return key when
typing in the multi line text box and add paragraphs or simple
sentances they all come out with no line breaks on the page when
shown???
Do I have to make my own rich text box editor? or is there
something Im missing?
Thanks in advance for any thoughts.
Tag

Tag2007 wrote:
> Thanks Im on the site now and dont see the lite
version?? Do you have a link to it please..
InterAKT was acquired by Adobe in September and most of its
products
were discontinued. The full version of KTML is now part of
the
Kollection suite.
The solution to your problem is very simple, though. I'm
sorry I can't
give you the exact coding, because I haven't used ASP for
many years.
However, all that you need to do is to create a function that
searches a
string for new line characters and replaces them with
<br> (or <br />
for XHTML).
PHP has a built-in function (nl2br()) to do this, but in ASP
you need to
search for the new line character code.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

New Line in pdf display

Using xdp + xml data to generate pdf.
I have a floating field that is bind to data. Data is a paragraph with multiple \n to indicate new line. When form is preview in designer it shows \n char instead of moving next content in paragraph to new line.
It used to work in old version of Designer but not any more in ES2 (9)
I need to know what data need to be sent so that content would display on new line.
Thanks
YogLC

Paul,
the old version of the designer and Form server was displaying paragraph correctly with following xml data but with Designer ES2 9 SP1 shows \u000d\u000a character inside the paragraph and server throw exception on this xml data. (cobra communication error ...)
I tried replacing \u000d\u000a with 
  but server throws exception.
Also If user enter multiple CR in the textarea still server throws exception.
<Paragraph>My comments for content from the textfield paragraph are here My comments for content from the textfield paragraph are here My comments for content from the textfield paragraph are here My comments for content from the textfield paragraph are here \u000d\u000a</Paragraph>
or
<Paragraph>My comments for content from the textfield paragraph are here My comments for content from the textfield paragraph are here My comments for content from the textfield paragraph are here My comments for content from the textfield paragraph are here
for content from the textfield paragraph are here My comments for content from the textfield paragraph are here
\u000d\u000a</Paragraph>

500k profile after disruption and new line install...

Hello,
Status:
I have an open fault logged with BT;
Phone line ok but broadband speed low, profile appears stuck at 500k.
History: sporadic BBand connection and noisy phone line followed by outright failure of both.
Engineers visited and confirmed line between street and master socket probably corroded - they put it on leg+leg to get it working while we waited for a new physical line to be installed.
Pavement was dug up, new armoured cable run from street to house, and a proper master socket fitted (NT5 ? but no inbuilt ADSL filter).
In effort to ensure low noise, ALL other sockets in the property disconnected.
Digital phone (3 handsets off a single powered base) are run off the master socket using a filter.
Router is business hub - 2700hgv; f/w 6.1.1.48.1-enh.tm , h/w 2701-100589-005 .
Hub is connected to same master socket as phone (as it's the only socket now connected to the new line).
New line was installed approx 18 days ago.
Speed tests (speedtest.net) repeatedly show download of 480kbps, upload around 620kbps.
No change since new line was installed and all but the master socket decomissioned.
I use wireless to the router but also repeated tests with a Cat6 copper RJ45 cable and got same results.
Have taken all wireless devices offline and removed electrical items near phone line power supply and cable path to reduce potential noise and repeated tests.
I left the router on for two weeks and no increase in broadband speed.
I rebooted it twice this weekend to see whether it picked up a different profile - but no change.
BT speedtester repeatedly indicates a profile of 500k (full results further down).
Last year I had speeds about 512k on a DrayTek router before switching to the 2700HGV. The change to the BT hub upped the download speed to around 1Mbps, which made a huge difference.
I know I am "a long way from the exchange" but I've had 1Mbps last year and now have a new line into my property, so not much left that I can do to improve the situation.
I'd like to know what can be done to get me at least 1Mb download again.
I have an engineer visit due tomorrow but I believe that will be purely to finish putting paving slabs back over the armoured cable that's been installed (i.e. OpenReach dig team rather than line engineers).
After those slabs are done, I expect the fault will be closed but I'll still have a 500k profile and will need to raise a new fault all over again - that fault was opened 5 weeks ago.
Results of speedtester.bt.com run just now (1pm Sun 13th March 2011):
Download speed achieved during the test was - 363 Kbps
For your connection, the acceptable range of speeds is 100-500 Kbps.
Additional Information:
Your DSL Connection Rate :576 Kbps(DOWN-STREAM), 777 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 2.46:14.86:82.95 (SBE:NBEBE)
Upload speed achieved during the test was - 638 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 777 Kbps
Router web interface shows:
Rate:
576 kbs
778 kbs
Max Rate:
2621 kbs
784 kbs
Noise Margin:
16.7 dB
7.0 dB
Attenuation:
62.8 dB
35.8 dB
Output Power:
16.1 dBm
12.4 dBm
Protocol:
G.DMT2 Annex A
Channel:
Interleaved
DSLAM Vendor Information
Country: {46336} Vendor: {IFTN} Specific: {48753 }
ATM PVC:
0/38
Rate Cap:
2621 kbs
Attenuation @ 300kHz:
62.8 dB
Uncanceled Echo:
-14.8 dB
Ok
VCXO Frequency Offset:
-2.0 ppm
Ok
Final Receive Gain:
34.5 dB
Ok
Impulse Noise Comp. Tones:
0
Ok
Excessive Impulse Noise:
0
Ok
I hope that's the information that someone might need to help me at least get 1Mbps back on my line.
Regards,
BK

Hi Bk1
Welcome to the Community.
Send me an email to the link in the about me section of my profile.
I can have this looked into for you further.
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Missing white apce and new lines in pdf report output

Similar Messages

Maybe you are looking for