Missing Windows 7 64-bit PCI Memory Controller Driver on X61
I'm sure this has already been discussed but I could not find the thread. Does anyone have any information on why I cannot find a Windows 7 64-bit compatible PCI Memory Controller Driver for my X61 7675 CTO?
Thanks,
-Ron
PCI Memory controller is Turbo Memory:- http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-67820
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel
Similar Messages
-
2nd Request - PCI Memory Controller for ThinkPad T500 2081-CTO OS Vista 64bit
Evidently the PCI Memory Controller driver is not installed on my ThinkPad T500 2081-CTO OS Vista 64bit and shows up as an error when running the Lenovo System Tool Box.
Searching this forum I found one psot as follows BUT thisis for a T-200 laptop.
Re: Driver for PCI Memory Controller
Options
02-25-2009 06:59 AM
You need the driver for Intel Turbo Memory. Only Windows Vista can use Turbo Memory, so we only have a Vista version for the driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67820
Is this driver appropriate?
Do I need the PCI Memory Controller driver .. and if so where do I find it for my laptop?
Thanks.
Solved!
Go to Solution.I would suggest that you forget about turbo memory. Intel quit talking about it and they have not released a driver since 2009. That is 2 years before service pack 1 was released. I ran tests and I was never able to measure any improvement with a card installed. As far as I am concerned, it is just something else to break and interfere with other components.,
-
Satellite Pro A200-1MI - Need driver for PCI memory controller
I have the Toshiba Satellite Pro A200-1MI(PSAE7E) having a problem with PCI Memory Controller on my notebook.
When I go to Device Manager it shows question mark in the tab Other Devices and when I go there, it's yellow ?(question mark) and !(exlamation mark) at PCI Memory Controller. I took and downloaded all the drivers from your site:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
for XP but I am not sure what type of drivers do I have to install for PCI Memory Controller, is it bios driver or something else? I just need to know what to install to overcome that problem with my Device Manager and PCI Memory Controller.
Thanks in advance!Hello akibono
I presume you have installed clean WXP on your notebook and now you want to install all drivers, tools and utilities. Am I right about that?
Anyway, after WXP installation you must install all drivers, tools and utilities in specific installations order. After doing this everything should be OK and every hardware component will be properly configured.
Please install all stuff as follow:
WXP
Chipset driver
Display driver
Sound driver
Modem driver
Storage manager
LAN driver
Touchpad driver
WLAN driver
Toshiba Assist
Flash Media driver
Webcam driver
Hardware setup
Controls
And so on
I hope everything will be OK. -
Hi all
How do I get rid of this yellow question mark in Device manager
Says
PCI Memory Controller no drivers loaded.
Running K9N4 Ultra F with Sempron 3000 CPU 1 gig Ram
Win Xp Home new copy and sata 160 gig drive Seagate.
ATI video 1300 card PCI express
Is this cause the raid drivers are no installed?
ThanksWhat ram are you using?
-
[ms-1719/gx700] - windows 7 64bit - mass storage controller driver missing
Hi,
I have a question about finding/installing the mass storage controller driver, after a clean install of win7 sp1 64bit (home edition).
I bought a new drive (Seagate ST9500420AS), onto which I installed the OS.
I thought the OS itself was supposed to install this driver?.....I looked at Seagate's site and they say the same thing. For good measure I used the "live update 5" MSI utility to see if they could provide it for my mobo....nothing useful came up there, and also looked at their page for my laptop model (GX700) no such drivers available either....neither for XP/Vista, let alone win7 64bit.
After installing the OS I also went out to Intel's site and downloaded/installed the latest chipset drivers for my mobo/chipset as well.....that didnt fix it.
so question is, where can I find this if none of the above worked??.
here's my detailed specs page:
http://speccy.piriform.com/results/wrsR2VbtVA042hKxLkCy1sR
thanks,
paulguys,
thanks a lot for the quick replies.
@Stu:
I was actually wondering about those...if those micro reader drivers were what I needed...thanks for confirming and point at the x64 version. I'll put them on pretty soon, see what happens.
@Henry,
no, I wasnt aware about that at all.....but now that you mentioned it, it makes sense, the difference between my old sata1 and the new sata2. I am pretty inexperienced when it comes to messing w/ hardware, so the question is where would I get a jumper block like that?
also if I leave it as I have for the last 2 months since I had the new HD, what could happen w/out our the jumper block?....data loss/corruption, anything like that or worse??.....just wondering if it'd be ok for me to leave it as is, or if there are any issues that can come up, for which it'd be worth for me to get the jumper and install it as you mention.
also if not having this jumper does cause any issues, I was wonder if it could cause certain blank-out crashes that I've been having, which seemed so far to be related to vidcard.....but not sure if this difference between sata1 and sata2 could actually be causing these....here is the thread for that if you have any thoughts...
https://forum-en.msi.com/index.php?topic=152390.msg1127936#msg1127936
thanks again,
paul -
Why did my keyboard not work after installing PCIE LAN controller driver?
I installed the drivers on
http://www.msi.com/support/mb/B85ME45.html#down-driver&Win7 64
in random order and was not asked to restart my computer until after Realtek PCI-E Ethernet Drivers was installed. I clicked Yes, Restart Now. However, It took the computer quite a long time to try to shutdown. I couldn't wait, so I pressed Reset button on the computer case. The computer restarted. I typed the administrator password. To my surprise, no asterisks appeared in the password box. It seemed as if my keyboard was not connect to my computer.
I had to restart and choose the Safe Mode. In the safe mode, I restored Windows 7 to the previous system restore point, in which Realtek PCI-E Ethernet Drivers had not been installed. Then everything was OK.
The drivers http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#1
don't work either. And the result of installing it is exactly the same as before. -
Satellite Pro P300: Need Vista 64bit 'Mass storage controller' driver
Hi, please help.
I've just upgraded my laptop from Windows Vista 32bit to Vista 64bit.
I've managed to find all the drivers apart one: The 'Mass storage controller' driver (yellow exclamation mark in Device Manager).
I don't know where to look for this driver.
Any help would be appreciated. AlHi
I assume you didnt search in forum for similar questions? Is it right?
I think Im right because I searched in the forum and found this Toshiba FAQ doc.
+No Windows XP driver for PCI Memory Controller+
http://aps2.toshiba-tro.de/kb0/TSB83023N0000R01.htm
Here you can find this text passage:
After installing Windows XP there could be a yellow exclamation mark by a "PCI Memory Controller" or *"Mass Storage Controller"* in the device manager.
_Solution:_
This device is likely the Turbo Memory former Robson module.
This hardware will only supported by Windows Vista.
Therefore there is no Windows XP driver.
Now everything should be clear ;) -
for some reason i cannot connect to the internet. found when i got home that i don't have a pci serial controller driver or something so it wont pick up my modem. i guess my lil brother did something to the comp while i was gone. anyone have any idea where i can find this driver or figure out what's wrong too? also, that new hardware stuff popped up for pci to pci bridge controller or whatever it is popped out. i couldnt find the driver for that either. so i'm using the one that was on my harddrive.....viamach.inf? also i'm at a friend's house downloading the new via 4n1 driver and hoping to see if that works....
well under device manager, it came up under unknown devices/other devices --- pci serial controller and pci communication device. what i did was clicked update driver and select drivers from list since windows was unable to locate a driver. I selcted HCF Modem driver and selected Rockwell Conextant HCF modem driver. it came up with a popup saying that installing this driver may or may not work since it was not made for the device(even though it was) and it worked. i still have another problem. when i first found this problem i just tried switching the modem to another pci slot and later on switched it back to the original. now the computer thinks i still have it in the other slot. so now i have "two" modems even though it uses one. i've probably already lost you in all this typing :D
-
Finding PCI Seriel Port Driver
HP Compaq 6000 Pro SFF PC
window 7 pro 32 bit
pci seriel port driver with hardware ids as below;
PCI\VEN_8086&DEV_2E17&SUBSYS_3048103C&REV_03
PCI\VEN_8086&DEV_2E17&SUBSYS_3048103C
PCI\VEN_8086&DEV_2E17&CC_070002
PCI\VEN_8086&DEV_2E17&CC_0700Hi,
Please try :
http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4023816&swItemId=vc_75036_2&swEnvOid=4053
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Multimedia Controller driver?
I lost the driver disk to that came with my k7n2 delta (nforce2) main board. I went to the msi website and downloaded when I thought were the right drivers. Every device was found and installed except for a Multimedia controller and a multimedia video controller.
Does anyone know where to get the correct drivers.
The driver package I downloaded off the msi web site was as follows
NVIDIA nForce2 System Drivers for MCP2 of SB
Support model K7N2 (MS-6570), K7N2G (MS-6570), K7N2GM-L(MS-6777)
Description This nForce2 Win2K/XP driver package contains the below components:
Audio driver 4.08 (WHQL)
Audio utilities 4.08
Ethernet driver 3.13 (WHQL)
GART driver 3.34 (WHQL)
Memory controller driver 3.38 (WHQL)
SMBus driver 3.38 (WHQL)
IDE In-the-box 2.70
Installer 4.27
This nForce Win9x driver package contains the below components:
Audio driver 3.75 (WHQL)
Audio utilities 3.75
Ethernet driver 3.13 (WHQL)
GART driver 3.34 (WHQL)
Memory controller driver 3.38 (WHQL)
SMBus driver 3.38 (WHQL)
Installer 3.42
Date 2004-7-20
Thanks for any help in advanceWas this system setup using a clean install of XP wit SP2 or an upgrade to SP2?
I've seen a lot of problems with just doing an upgrade to SP2. Any time 1 of my customers ask me about upgrading to SP2 I tell them to get the lastest drivers for all thier hardware, back up all important files to disk, then do a clean install of XP with SP2.
If all you have is a cd for XP, there is a way to slipstream SP2 into XP and make a new cd that'll install cleanly. Then all you have to do is install all your hardware drivers.
Here's my favorite site for slistreaming SP2, http://www.theeldergeek.com/slipstreamed_xpsp2_cd.htm
It shows you how to do it using Roxio or Nero with the net download of SP2. I did it with the SP2 cd that I was able to obtain from MS. All I had to do was modify the run command line. -
PCI Communication Controller and USB Mass Storage Device driver was missing
Hi,
Recently i formated HP Pavilion Slimline 400 PC series and reinstalled with windows 7 32 bit.\
initially i found a lot of driver was missing. i have gone through hp support forums and almost all drivers are running on 64 bit with minimum requirement OS windows 8.1.
i couldn't find it anywhere. under device manager, these two devices are being shown with yellow exclamation
PCI Simple Communication Controller :
PCI\VEN_8086&DEV_8C3A&SUBSYS_2AF7103C&REV_04
PCI\VEN_8086&DEV_8C3A&SUBSYS_2AF7103C
PCI\VEN_8086&DEV_8C3A&CC_078000
PCI\VEN_8086&DEV_8C3A&CC_0780
USB Mass Storage Device :
USB\VID_054C&PID_02A5&REV_0100
USB\VID_054C&PID_02A5
Please kindly provide the link for the drivers, so i can use my PC.
thanks in advanceHi:
Did you install the USB3 controller driver so the device you installed could work?
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21129&lang=eng&ProdId=3467
The USB Mass Storage Device is something you have connected to the PC.
Specifically a Sony® MicroVault USB Flash Drive.
If my suggestion to let windows update find the Intel Management Engine driver, didn't work, see if this driver from Intel works. It also has the hardware ID for that device in the setup information file.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22093&lang=eng -
Windows 7 driver for PCI Simple Controller
I installed the Lenovo Windows 7 Professional upgrade on my R400 (7443-CTO) from Windows XP Professional. The ThinkVantage tools repeatedly shows I need a driver for the "PCI Simple Controller". I have been unable to find that driver on the Lenovo support site. Any assistance to help resolve this issue would be appreciated.
Solved!
Go to Solution.To create shortcuts or folders under the startmenu in Win7 you can rightclick "All Programs" under the startmenu. Then you can choose "Open" or "Open all users". If you choose "Open" you will be able to change the startmenu for the current user account only and when you select "Open all users" you can change the startmenu for all user accounts on the computer. The startmenu in Windows is basically just folders and shortcuts stored in a folder on your computer. The startmenu for all users are stored under "C:\ProgramData\Microsoft\Windows\Start Menu" and for the current user under "C:\Users\<useraccount>\AppData\Roaming\Microsoft\Windows\Start Menu"
So let's say you want the "Thinkvantage" folder under the Windows startmenu where it should normally be after installing Lenovo toolbox and then the shortcut for Lenovo Toolbox under that folder. Then you can rightclick "All Programs" under the startmenu and select "Open all users" from the context menu. You should then see a explorer windows with the folder "Programs". If you open the "Programs" folder you will see the same contents as you see under the "startmenu -> All Programs". Since this is the area for the common startmenu for all user accounts there might be some more entries under the startmenu compared to what you see in this windows. By selecting "Open" instead of "Open all users" as explained above you should find the rest. So when you rightclicked, selected "open all users" and then doublecliked on "Programs" then you can rightclick somewhere in that window and choose "New -> Folder" from the context menu. Then you can give the folder the name "Thinkvantage". Then open the "Thinkvantage" folder and create a shortcut for Lenovo Toolbox. After you have done these steps you should find the Thinkvantage folder under "All Programs" and then the shortcut for Lenovo Toolbox under the Thinkvantage folder. This is how you can easily change the startmenu in Windows to add, remove or change entries under "All Programs".
Normally after installing Lenovo Toolbox it should be under "All Programs -> Thinkvantage" and not sure why that is not the case for you, but then you can add it manually like explained above. When i installed Lenovo Toolbox a shortcut and the Thinkvatage folder was created under "All Programs" during the installation. Also if you install the "System interface driver" and "Hotkey feature set" you can start Lenovo Toolbox by pressing the blue thinkvantage button on your computer. Unless you already installed "System Update 4.0" i would recommend to do so. System Update will find the drivers and software from Lenovo for your computer and give you a list where you can select those you want to download and install. System update will then download and install the drivers and software you selected and you don't have to download and install each one of them manually one by one. It will save you a lot of time. You can find system update for Windows 7 using the link below.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73695
User Access Control is a new feature of Windows that started with Windows Vista so therefore you won't find it in XP. Only Vista and Windows 7 got UAC.
Yes it's a bit late over here I'm sure i will enjoy the weekend and hope you will do the same. -
HP Pavilion G6 2230SA Windows 7 64 bit \usb \controller driver
Hi - I'm attempting to install Windows 7 (64Bit) on a HP Pavilion G6 2230SA Notebook which was originally delivered with Windows 8. I appreciate that this is not supported by HP but am simply hoping that someone could help me install the correct drivers which I'm missing? These are:
PCI Device
SM Bus Controller
Universal Serial Bus (USB) Controller
Any help that anyone can offer would be hugely appreciated!
This question was solved.
View Solution.Hi:
You need these drivers...
SMBus Controller:
Download, unzip and manually install the smbus controller driver I attached under Attachments below.
Go to the device manager and click on the smbus controller needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
USB3: Install both of these and reboot.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&...
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&...
PCI Device:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103762-1&cc=us&dlc=en&lc=en...
Attachments:
sp66185.zip 7 KB -
USB Controller Driver (3.0) for Windows Server 2008 Standard Edition 32-bit
Hi,
I have recently built a HP DL320e Gen8 v2 server with Windows Server 2008 Standard Edition 32-bit & it's missing the USB Controller Driver which HP don't have. I have searched endlessly online without success. HP suggest I try Windows but I couldn't
find it in the Download Center either.
Can somebody please provide me with the USB Controller Driver for Windows Server 2008 Standard Edition 32-bit?
Regards
NazHi,
Thanks for your posting.
For this issue, i think you need to search in the HP official website or contact the HP support.
Regards.
Vivian Wang -
HP Pavilion 15-n261nr windows 7 64 bit usb controller driver
I see to not be able to find the correct driver for the usb controller. The hardware for it is called PCI\VEN_8086&DEV_9C31&SUBSYS_2163103C&REV_04
Please use HP provided Intel USB 3.0 Host Controller Driver or Intel provided USB 3.0 Driver: Intel® USB 3.0 eXtensible Host Controller Driver for Intel® 8 Series/C220 Chipset Fa....
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Maybe you are looking for
-
How can I see the contents in a Ref Cursor
I have this code: CREATE OR REPLACE PACKAGE APOD_LOG.APOD_C3_LOG_API_PKG AUTHID CURRENT_USER AS type rc is ref cursor; PROCEDURE Fetch_Log_Spec in_LOCAL_IP_VALUE IN BINARY_INTEGER, out_RESULT_SET OUT rc END APOD_C3_LOG_API_PKG; CREATE OR REPLACE PACK
-
HT4528 Why is my sound only working through earpiece and headphones ???
My sound will not work through speakers or on speakerphone ...
-
I just received my new iPod Classic today, bought some games, then read that the games were for fifth generation iPods. is there a way I could get a refund now then buy the games when they become available for the new iPods or am I just out of luck (
-
Audigy Value, 24-bit + 96kHz suppo
Hi, currently I am using Creative Audigy Value and Windows Vista Business. http://www.creative.com/products/pro...05&product=489As it said, it should support 24-bit / 96kHz. It work really well in Windows XP. However, no 96kHz option can be found in
-
Since the latest ITunes update I cannot find all the CD songs I had converted into playlists. All I can find are the songs I bought on ITunes.