Missing workflow types in CUP

Hi Experts,
I am missing the workflow types. That is the workflow type CUP , mitigation control etc is not visible. Even the workflow type column is missing in request type. I have already imported the inital files
AE_init_clean_and_insert_data.xml
AE_init_append_data.xml
and AE_init_append_data_CC.xml
I guess it has something to do with one of these files not being uploaded correctly. how can I be sure?
Thanks,
Chinmaya
Edited by: chinmaya prakash on Jun 11, 2010 12:31 AM

Hi,
Go to configuration -> miscellaneous and see if you can see all the workflow types. If you can not then upload the files again.
If you do see the workflow types then activate them but clicking on the active checkbox in the right most column and save the settings.
Regards,
Alpesh

Similar Messages

In CUP create Initiator.... Workflow Type etc

Hi there,
In Create Initiator Workflow, Can anyone please let me know what is the difference between different types like ERM, CUP etc etc. We are implimenting RAR, CUP,RE and SPM. Is there any defalut settings there.
What is the reason behind each, any document or sap help link will be apprecited please.
Best Regards:
Priya

Priya,
every workflow type selection will lead to different attributes being available.
Have a look at this guide for examples - you can see how a risk change workflow has totally different attributes from a CUP workflow:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e03cd86c-3aa7-2a10-1aa6-e845902f555d
Frank.

CUP - How to de-activate the workflow types - SP10

Hi forum gurus,
I am currently customizing a brand new installation of AC 5.3, SP10.
We have activated all the workflow types under the Miscellaneous tab by mistake, which has now resulted in several
unused request types.
I have tried to de-activate the workflow types but get the following error, Cannot deactivate since the field is in use in Request Type. The system does not even allow you to delete the request types only to de-activate it.
Is there any way to deactivate these workflow types so that they do not appear?
Thanks,
Prevo.

Hi Alpesh,
NO requests have been created thus far! Its a brand new implementation.
I don't want non-used initiators and request types to be displayed from within
the CUP configuration tab, hence my request.
Rgds,
Prevo

Unable to save workflow types and create workflow stage in CUP

Hi Guru's,
We are currently installling GRC AC 5.3 and are stuck in configuration.
we are unable to create workflow stage in CUP. Whenever we try to open the tab for stage it gives below mentioned error.
Webpage error details
Message: Expected ';'
Line: 757
Char: 15
Code: 0
URI: http://172.25.7.32:50000/AE/scrLeftNav.linkConfigWorkFlowStages.do
Also while tryinng to save workflow types under "miscellaneous" we encounter error - Error saving workflow types
On further checking system log we found the below details --
Caused by: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPSR3DB.VI_AE_CTMDT_LOC1) violated
     at com.sap.sql.jdbc.common.CommonPreparedStatement.executeUpdate(CommonPreparedStatement.java:259)
     at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.executeUpdate(RTStatementJDBCPrepared.java:267)
     at sqlj.runtime.ExecutionContext$StatementFrame.executeUpdate(ExecutionContext.java:1124)
     at sqlj.runtime.ExecutionContext.executeUpdate(ExecutionContext.java:718)
     at com.virsa.ae.dao.sqlj.CustomAppDetDAO.insertCustomAppDetDetails(CustomAppDetDAO.sqlj:1022)
Please advice how it can be remediated.
Thanks
Akshay Daniel

Hi Akshay,
It seems you have uploaded some wrong file .
I would suggest you to delete those entries from table.
please check for the duplicate entry in u r workflow type under miscellaneous tab in CUP.
for example if you find duplicate entry for work flow type RE that is ERM ,   And the Work flow type ERM gives you error while saving request type .then please look for the table VIRSA_AE_WFTYPE   in file AE_init_append_data_RE.xml   and follow the below mentioned steps:
1. log in to SQL with SYSDBA access delete the duplicate entry.
2.use below command to find the
SQL> select * from SAPSR3DB.VIRSA_AE_WFTYPE where NAME='ERM'
3. delete this Row form the table.
4. restart AS java
After deleting this duplicate entry your issue should get resolved.
please let em know if your issue is resolved
Edited by: prashntk on Jul 21, 2011 10:48 AM

Workflow Type "RE" Missing

Hi All,
I am trying to create a Workflow for the role approval.
I am not finding the Workflow type "RE" in the dropdown list under create initiator section
Please help me what are the configuration settings which are required for getting this workflow type "RE".
Regards,
Kumar

Kumar,
Please follow the steps below to see workflow type "RE" in CUP:
1) Upload/import .xml file received with ERM (RE) installation into CUP (AE). This file is called AE_init_append_data_RE.xml. Make sure to upload this file into initial data of CUP.
2) Once this file is uploaded, go to miscellaneous section of CUP and you should be able to see workflow type RE. Now, make sure to activate this workflow by checking the box on the right and saving it.
Now, you will see workflow type 'RE' in CUP.
Regards,
Alpesh

Missing Workflow XAML Feature Error during site creation from custom template Microsoft.Workflow.Client.ActivityNotFoundException

Hi,
I am using SharePoint 2013 Enterprise with the March CU.
I created a project site template with libraries, lists and workflows and saved it as a template with content. When I try to create a new site using this template, I get the error pasted at the bottom.
I was using SharePoint designer workflow custom activities created in VS2012. I uninstalled those and decided to call a web service directly from SharePoint designer. The workflows work fine inside of the site which I want to create a project template
from. When creating a new site from the template, SharePoint complains about a missing workflow XAML feature.
Do I have some leftover references to the custom features? Does anyone know how to resolve this issue?
<nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e' from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c'
was not found. HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME. Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c. Client ActivityId : 69e6449c-9c3c-f090-404f
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: <nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e'
from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c' was not found. HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c.
Client ActivityId : 69e6449c-9c3c-f090-404f
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x8107058a): <nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e' from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c'
was not found. HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME. Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c. Client ActivityId : 69e6449c-9c3c-f090-404f]
Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) +0
Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) +293
[SPException: Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e' from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c' was not found.
HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME. Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c. Client ActivityId : 69e6449c-9c3c-f090-404f]
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) +889
Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors)
+928
Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) +532
Microsoft.SharePoint.ApplicationPages.TemplatePickerUtil.ApplyWebTemplateAndRedirect(SPWeb Web, String strWebTemplate, Nullable`1 bSharedNav, Boolean bOnTopNav, Boolean bOnQuickLaunch, Page page, Boolean bDeleteOnError, SPFeatureDependencyErrorBehavior
featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) +2076
Microsoft.SharePoint.ApplicationPages.NewSubwebPage.BtnCreateSubweb_Click(Object sender, EventArgs e) +861
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +146
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3586
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18045

Hi Jerry Choinski,
For your error, It could possibly have something to do with that the workflow did not publish before saving your project site as a template.
The "Elements.xml" file, which is packaged within the "wsp" solution file contains 2 "<File" elements. One file element represents the XAML file, and the other
represents the WF association file. If the WSPublishState value for each "<File" element differ (one has a value of "3" and the other a value of "1"), the error will occur. For solving your problem, please update the WSPublishState value for both "<File"
elements to “3”.
PropertyName="WSPublishState"
Value="3"
Also note that the WSPublishState property is also duplicated within the "MetaInfo" property, so both occurrences should be updated. Then the resulting files need
to be re-packaged into the template.
Reference :
http://social.technet.microsoft.com/Forums/en-us/be41f1c5-1dfb-4869-9a52-1c93902bfd91/microsoftworkflowclientactivitynotfoundexception-when-deploying-solution-with-workflow
Please inform me freely if you have any questions.
Thanks

SOAPException: faultCode=SOAP-ENV:Protocol; msg=Missing content type

I have a WSDL file for which I have created a Web Service stub/skeleton through jdeveloper(version 10.1.2.3.0). Below is the complete code which has been generated by developer. Now whenever i try to run this file in jdeveloper I get the following exception. Please let me know how to resolve this issue.
Also error message is received at the following line of code:
*msg.send(endpointURL, ""<<some URL>>", requestEnv);*
{code}
*Exception Message*
{code}
[SOAPException: faultCode=SOAP-ENV:Protocol; msg=Missing content type.]
at org.apache.soap.transport.TransportMessage.read(TransportMessage.java:249)
at oracle.soap.transport.http.OracleSOAPHTTPConnection.post(OracleSOAPHTTPConnection.java:973)
at oracle.soap.transport.http.OracleSOAPHTTPConnection.send(OracleSOAPHTTPConnection.java:722)
at org.apache.soap.messaging.Message.send(Message.java:125)
at mypackage.NPVNSDLStub.PANDetails(NPVNSDLStub.java:88)
at mypackage.NPVNSDLStub.main(NPVNSDLStub.java:41)
{code}
*Code generated by Jdeveloper*
{code}
package mypackage;
import oracle.soap.transport.http.OracleSOAPHTTPConnection;
import org.apache.soap.encoding.SOAPMappingRegistry;
import org.w3c.dom.Element;
import java.util.Vector;
import oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub;
import java.net.URL;
import org.apache.soap.Envelope;
import org.apache.soap.Body;
import org.apache.soap.messaging.Message;
import java.util.Properties;
* Generated by the Oracle JDeveloper 10g Web Services Stub/Skeleton Generator.
* Date Created: Wed Feb 29 18:39:33 IST 2012
* WSDL URL: file:/C:/WS/sample.wsdl
public class NPVNSDLStub extends WrappedDocLiteralStub
public NPVNSDLStub()
m_httpConnection = new OracleSOAPHTTPConnection();
public static void main(String[] args)
try
NPVNSDLStub stub = new NPVNSDLStub();
stub.PANDetails("aaaaa8888a");
catch(Exception ex)
ex.printStackTrace();
private String _endpoint = "<<some URL>>";
public String getEndpoint()
return _endpoint;
public void setEndpoint(String endpoint)
_endpoint = endpoint;
private OracleSOAPHTTPConnection m_httpConnection = null;
private SOAPMappingRegistry m_smr = null;
public String PANDetails(String Request) throws Exception
URL endpointURL = new URL(_endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
String wrappingName = "PANValidationRequest";
String targetNamespace = "<<namespace url>>";
Vector requestData = new Vector();
requestData.add(new Object[] {"Request", Request});
requestBodyEntries.addElement(toElement(wrappingName, targetNamespace, requestData, false));
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.setSOAPTransport(m_httpConnection);
*msg.send(endpointURL, "<<some URL>>", requestEnv);*
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
Vector responseData = responseBody.getBodyEntries();
return (String)fromElement((Element)responseData.elementAt(0), java.lang.String.class);
{code}
Edited by: EJP on 2/03/2012 17:22: added code tags, but your indentation needs fixing

Kishore,
See the links referenced in these threads.
Web Services and R12
Re: Web Services and R12
Integrated SOA Gateway
Re: Integrated SOA Gateway
Regards,
Hussein

Error in CLR: InvalidOperationException - The current type is an interface and cannot be constructed. Are you missing a type mapping?

Hi, I'm trying to execute a .NET assembly's method from SQL Server 2012 Express, but I'm stuck with this error calling the sp:
Microsoft.Practices.ServiceLocation.ActivationException: Activation error occured while trying to get instance of type ISymmetricCryptoProvider, key "TripleDESCryptoServiceProvider" ---> Microsoft.Practices.Unity.ResolutionFailedException:
Resolution of the dependency failed, type = "Microsoft.Practices.EnterpriseLibrary.Security.Cryptography.ISymmetricCryptoProvider", name = "TripleDESCryptoServiceProvider".
Exception occurred while: while resolving.
Exception is: InvalidOperationException - The current type, Microsoft.Practices.EnterpriseLibrary.Security.Cryptography.ISymmetricCryptoProvider, is an interface and cannot be constructed. Are you missing a type mapping?
At the time of the exception, the container was:
Resolving Microsoft.Practices.EnterpriseLibrary.Security.Cryptography.ISymmetricCryptoProvider,TripleDESCryptoServiceProvider
---> System.InvalidOperationException: The current type, Microsoft.Practices.EnterpriseLibrary.Security.Cryptography.ISymmetricCryptoProvider, is an interface and cannot be constructed. Are you missing a type mapping?
System.InvalidOperationException:
   en Microsoft.Practices.ObjectBuilder2.DynamicMethodConstructorStrategy.ThrowForAttemptingToConstructInterface(IBuilderContext context)
   en BuildUp_Microsoft.Practices.EnterpriseLibrary.Security
Microsoft.Practices.ServiceLocation.ActivationException:
   en Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
   en Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance[TService](String key)
   en Microsoft.Practices.EnterpriseLibrary.Security.Cryptography.Cryptographer.GetSymmetricCryptoProvider(String symmetricInstance)
   en Microsoft.Practices.EnterpriseLibrary.Security.Cryptography.Cryptographer.DecryptSymmetric(String symmetricInstance, String ciphertextBase64)
   en ...
Is there any limitation by design for Interface instantiation from CLR database?
Any help I will appreciate, thanks a million!!

Bob, thanks for your response.. Yes, the code works fine outside of SQLCLR. This is the class I'm trying to instantiate, I'm using it to envolve Cryptographer, an Enterprise Library 5.0 class actually, so I have no control to test it without referring the
interface.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.Practices.EnterpriseLibrary.Security.Cryptography;
using System.Security.Cryptography;
using Microsoft.SqlServer.Server;
using System.Data.SqlTypes;
namespace Cars.UtileriasGlobales.Helpers
    /// <summary>
    /// Clase que permite encriptar y desencriptar cadenas de textos utilizando
    /// TripleDESCryptoServiceProvider de Enterprise Library 5.0
    /// </summary>
    public static class Cryptography
        #region Metodos
        [SqlProcedure]
        public static void DesencriptarSQLServer(SqlString cadena, out SqlString cadenaDesencriptada)
            cadenaDesencriptada = !String.IsNullOrEmpty(cadena.ToString()) ? Cryptographer.DecryptSymmetric("TripleDESCryptoServiceProvider", cadena.ToString().Replace(" ", "+"))
: String.Empty;
        #endregion
I have collected all the dependent assemblies in one directory 'C:\migrate', so the create assembly finish ok. This is the script to create the assembly I'm using:
sp_configure 'clr enable', 1
GO
RECONFIGURE
GO
ALTER DATABASE cars SET TRUSTWORTHY ON
GO
CREATE ASSEMBLY CryptographyEntLib5
AUTHORIZATION dbo
FROM 'C:\migrate\Cars.UtileriasGlobales.dll'
WITH PERMISSION_SET = UNSAFE
GO
CREATE PROCEDURE usp_Desencriptar
@cadena nvarchar(200),
@cadenaDesencriptada nvarchar(MAX) OUTPUT
AS EXTERNAL NAME CryptographyEntLib5.[Cars.UtileriasGlobales.Helpers.Cryptography].DesencriptarSQLServer
GO
DECLARE @msg nvarchar(MAX)
EXEC usp_Desencriptar 'Kittu And Tannu',@msg output
PRINT @msg

RE workflow type is not showing up in the Request type list in AE

Hi,
I had appended the AE_init_append_data_RE.xml file in the Configuration->Initial System Data.
Even after appending this file , the RE workflow type is not showing up in the AE Request type list.
Please guide me.

Hi All,
Thanks for ur inputs. It is working now. I could see all the workflow types after appending the two files
1. AE_init_ append_data_RE.xml
2. AE_init_ append_data_CC.xml
I have created
1. Initator with workflow type RE using Request type and priority -RE_HIGH as attributes
2. CAD by giving webservice URL.
3. Configured workflow with one stage.
Now, if I process a request in RE I am getting an error "ERROR IN CREATING REQUEST". What may be the problem..? I am happy to receive your suggestions.
Thanks

Error: REPORT/PROGRAM statement missing , program type is I (include).

Hi,
I have created a REPORT Program (Z Program) and also created a TOP INCLUDE. I am NOT using Function module. When I tried to syntex check the INCLUDE, system is giving
following error:
REPORT/PROGRAM statement missing, program type I (Include).
Can you help me in resolving this error.
Currently TOP include has only one statement to declare a Constant.
Thanks,

hi,
take your program in se80.
double click on the program name. Right click on it and press Activate. All the include will get activated and the problem will get solved.
Regards,
Renjith Michael.
http://www.sourceveda.com/

Missing movement type data in 0IC_C03 cube

Hi Gurus ,
i have deltas running for 0ic_c03 cube in B1 7.0 i have used transformations for loading cube .
In a report of this cube for plant material stock, i can c the quantities matching with MB51 report of R/3 where as the values are not matching for sum material ( negative stock values with 0 qtys )
i found that a movement type 121 data is missing in BW
i have read thread on the forum suggesting to work on OMJJ transaction and make 121 movement type as statistics relevant.
But i want to know how this action will effect on R/3 update controlling ?
any inputs will b a grt help
Edited by: Rajesh Dalwadi on Jan 13, 2009 12:09 PM

Hi,
We faced lot of problems with missing movement type, fo that we taken correct confirmation from MM team and then added it in Update Rules and deleted the data in Cube and then Re-Initialized the Cube.
To do this, you need ECC Down Time. I'm talking about BW 3.5. I think in BI7, it may be easy, (without taking down time, pls check).
Thanks
Reddy

Load approvers, solicitors & workflows to the CUP (SAP GRC AC 5.3)

Hello,
I want to know if there is a way to load the approvers, solicitors & workflows to the CUP (SAP GRC AC 5.3) massively.
Best Regards.
Pablo Mortera.

Most of the configuration screens in CUP have an export button and an associated excel/text upload template. Use this template to mass create/update configuration data.
Regards,
Alpesh

Missing inline type when compile glsl2agal with flascc

I'm trying to compile Glsl2Agal [https://github.com/adobe/glsl2agal] using flascc on windows and I get the following errors(all samples build correctly.).As anyone have an idea where I could start looking? Ths. all !
chencheng01@PC-05093 /cygdrive/d/FlasCC/samples/glsl2agal-master
$ make FLASCC="/cygdrive/d/flascc/sdk" FLEX="/cygdrive/d/flascc/AirSdk"
peflags --cygwin-heap=500 "/cygdrive/d/flascc/sdk/usr/bin/llc.exe"
/cygdrive/d/flascc/sdk/usr/bin/llc.exe: initial Cygwin heap size: 500 (0x1f4) MB
cd swc && PATH="/cygdrive/d/flascc/sdk/usr/bin":"/cygdrive/d/FlasCC/samples/glsl2agal-master/instal l/usr/bin":"/usr/local/bin:/usr/bin:/cygdrive/d/Program Files
/Java/jdk1.7.0_71/bin:/cygdrive/c/Program Files (x86)/NVIDIA Corporation/PhysX/Common:/cygdrive/c/Program Files (x86)/Intel/iCLS Client:/cygdrive/c/Program File
s/Intel/iCLS Client:/cygdrive/c/Program Files/Common Files/Microsoft Shared/Windows Live:/cygdrive/c/Program Files (x86)/Common Files/Microsoft Shared/Windows L
ive:/cygdrive/c/Windows/system32:/cygdrive/c/Windows:/cygdrive/c/Windows/System32/Wbem:/cy gdrive/c/Windows/System32/WindowsPowerShell/v1.0:/cygdrive/c/Program F
iles (x86)/Windows Live/Shared:/cygdrive/c/Program Files/Intel/Intel(R) Management Engine Components/DAL:/cygdrive/c/Program Files/Intel/Intel(R) Management Eng
ine Components/IPT:/cygdrive/c/Program Files (x86)/Intel/Intel(R) Management Engine Components/DAL:/cygdrive/c/Program Files (x86)/Intel/Intel(R) Management Eng
ine Components/IPT:/cygdrive/c/Program Files (x86)/Microsoft SQL Server/100/Tools/Binn:/cygdrive/c/Program Files/Microsoft SQL Server/100/Tools/Binn:/cygdrive/c
/Program Files/Microsoft SQL Server/100/DTS/Binn:/usr/bin:/usr/X11R6/bin" CC=gcc CXX=g++ CFLAGS=-O4 CXXFLAGS=-O4 cmake -D SDK="/cygdrive/d/flascc/sdk" .
-- Configuring done
-- Generating done
-- Build files have been written to: /cygdrive/d/FlasCC/samples/glsl2agal-master/swc
cd swc && PATH="/cygdrive/d/flascc/sdk/usr/bin":"/cygdrive/d/FlasCC/samples/glsl2agal-master/instal l/usr/bin":"/usr/local/bin:/usr/bin:/cygdrive/d/Program Files
/Java/jdk1.7.0_71/bin:/cygdrive/c/Program Files (x86)/NVIDIA Corporation/PhysX/Common:/cygdrive/c/Program Files (x86)/Intel/iCLS Client:/cygdrive/c/Program File
s/Intel/iCLS Client:/cygdrive/c/Program Files/Common Files/Microsoft Shared/Windows Live:/cygdrive/c/Program Files (x86)/Common Files/Microsoft Shared/Windows L
ive:/cygdrive/c/Windows/system32:/cygdrive/c/Windows:/cygdrive/c/Windows/System32/Wbem:/cy gdrive/c/Windows/System32/WindowsPowerShell/v1.0:/cygdrive/c/Program F
iles (x86)/Windows Live/Shared:/cygdrive/c/Program Files/Intel/Intel(R) Management Engine Components/DAL:/cygdrive/c/Program Files/Intel/Intel(R) Management Eng
ine Components/IPT:/cygdrive/c/Program Files (x86)/Intel/Intel(R) Management Engine Components/DAL:/cygdrive/c/Program Files (x86)/Intel/Intel(R) Management Eng
ine Components/IPT:/cygdrive/c/Program Files (x86)/Microsoft SQL Server/100/Tools/Binn:/cygdrive/c/Program Files/Microsoft SQL Server/100/Tools/Binn:/cygdrive/c
/Program Files/Microsoft SQL Server/100/DTS/Binn:/usr/bin:/usr/X11R6/bin" CC=gcc CXX=g++ CFLAGS=-O4 CXXFLAGS=-O4 make -j6
make[1]: Entering directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[2]: Entering directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[3]: Entering directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[3]: Leaving directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[3]: Entering directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[3]: Entering directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[3]: Leaving directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
[100%] Built target glsl2agal
错误: 缺少内置类型 Object //That's mean missing inline type Object
1 error found
make[3]: *** [CMakeFiles/agal_optimizer] Error 1
make[3]: Leaving directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[2]: *** [CMakeFiles/agal_optimizer.dir/all] Error 2
make[2]: Leaving directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
Makefile:11: recipe for target `swc' failed
make: *** [swc] Error 2

I'm trying to compile Glsl2Agal [https://github.com/adobe/glsl2agal] using flascc on windows and I get the following errors(all samples build correctly.).As anyone have an idea where I could start looking? Ths. all !
chencheng01@PC-05093 /cygdrive/d/FlasCC/samples/glsl2agal-master
$ make FLASCC="/cygdrive/d/flascc/sdk" FLEX="/cygdrive/d/flascc/AirSdk"
peflags --cygwin-heap=500 "/cygdrive/d/flascc/sdk/usr/bin/llc.exe"
/cygdrive/d/flascc/sdk/usr/bin/llc.exe: initial Cygwin heap size: 500 (0x1f4) MB
cd swc && PATH="/cygdrive/d/flascc/sdk/usr/bin":"/cygdrive/d/FlasCC/samples/glsl2agal-master/instal l/usr/bin":"/usr/local/bin:/usr/bin:/cygdrive/d/Program Files
/Java/jdk1.7.0_71/bin:/cygdrive/c/Program Files (x86)/NVIDIA Corporation/PhysX/Common:/cygdrive/c/Program Files (x86)/Intel/iCLS Client:/cygdrive/c/Program File
s/Intel/iCLS Client:/cygdrive/c/Program Files/Common Files/Microsoft Shared/Windows Live:/cygdrive/c/Program Files (x86)/Common Files/Microsoft Shared/Windows L
ive:/cygdrive/c/Windows/system32:/cygdrive/c/Windows:/cygdrive/c/Windows/System32/Wbem:/cy gdrive/c/Windows/System32/WindowsPowerShell/v1.0:/cygdrive/c/Program F
iles (x86)/Windows Live/Shared:/cygdrive/c/Program Files/Intel/Intel(R) Management Engine Components/DAL:/cygdrive/c/Program Files/Intel/Intel(R) Management Eng
ine Components/IPT:/cygdrive/c/Program Files (x86)/Intel/Intel(R) Management Engine Components/DAL:/cygdrive/c/Program Files (x86)/Intel/Intel(R) Management Eng
ine Components/IPT:/cygdrive/c/Program Files (x86)/Microsoft SQL Server/100/Tools/Binn:/cygdrive/c/Program Files/Microsoft SQL Server/100/Tools/Binn:/cygdrive/c
/Program Files/Microsoft SQL Server/100/DTS/Binn:/usr/bin:/usr/X11R6/bin" CC=gcc CXX=g++ CFLAGS=-O4 CXXFLAGS=-O4 cmake -D SDK="/cygdrive/d/flascc/sdk" .
-- Configuring done
-- Generating done
-- Build files have been written to: /cygdrive/d/FlasCC/samples/glsl2agal-master/swc
cd swc && PATH="/cygdrive/d/flascc/sdk/usr/bin":"/cygdrive/d/FlasCC/samples/glsl2agal-master/instal l/usr/bin":"/usr/local/bin:/usr/bin:/cygdrive/d/Program Files
/Java/jdk1.7.0_71/bin:/cygdrive/c/Program Files (x86)/NVIDIA Corporation/PhysX/Common:/cygdrive/c/Program Files (x86)/Intel/iCLS Client:/cygdrive/c/Program File
s/Intel/iCLS Client:/cygdrive/c/Program Files/Common Files/Microsoft Shared/Windows Live:/cygdrive/c/Program Files (x86)/Common Files/Microsoft Shared/Windows L
ive:/cygdrive/c/Windows/system32:/cygdrive/c/Windows:/cygdrive/c/Windows/System32/Wbem:/cy gdrive/c/Windows/System32/WindowsPowerShell/v1.0:/cygdrive/c/Program F
iles (x86)/Windows Live/Shared:/cygdrive/c/Program Files/Intel/Intel(R) Management Engine Components/DAL:/cygdrive/c/Program Files/Intel/Intel(R) Management Eng
ine Components/IPT:/cygdrive/c/Program Files (x86)/Intel/Intel(R) Management Engine Components/DAL:/cygdrive/c/Program Files (x86)/Intel/Intel(R) Management Eng
ine Components/IPT:/cygdrive/c/Program Files (x86)/Microsoft SQL Server/100/Tools/Binn:/cygdrive/c/Program Files/Microsoft SQL Server/100/Tools/Binn:/cygdrive/c
/Program Files/Microsoft SQL Server/100/DTS/Binn:/usr/bin:/usr/X11R6/bin" CC=gcc CXX=g++ CFLAGS=-O4 CXXFLAGS=-O4 make -j6
make[1]: Entering directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[2]: Entering directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[3]: Entering directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[3]: Leaving directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[3]: Entering directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[3]: Entering directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[3]: Leaving directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
[100%] Built target glsl2agal
错误: 缺少内置类型 Object //That's mean missing inline type Object
1 error found
make[3]: *** [CMakeFiles/agal_optimizer] Error 1
make[3]: Leaving directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[2]: *** [CMakeFiles/agal_optimizer.dir/all] Error 2
make[2]: Leaving directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/cygdrive/d/FlasCC/samples/glsl2agal-master/swc'
Makefile:11: recipe for target `swc' failed
make: *** [swc] Error 2

Steps for loading approvers, solicitors & workflows to the CUP

Hello,
I want to know if there is a way or steps to load the approvers, solicitors & workflows in the CUP of SAP GRC AC 5.3.
What I mean is that can I load first the workflows and then the approvers & solicitors and then join the approvers to the workflow, or do I have to put first the approvers & solicitors first and then the workflows & join them??
Please I need help.
Best regards...
Pablo Mortera.

Sorry, Pablo. Just one question::
What do you mean by solicitors?
Having approvers set up and creating workflows are two separate tasks and have no dependency so you don't have to worry about the order. You won't be able to create request without having both of them configured in CUP.
Regards,
Alpesh

AIR 14 Beta - Missing builtin type Object

I get "Missing builtin type Object" error message in Flash Builder after updating to AIR 14 Beta from projects that do NOT include AIR libraries.
Tried the usual Clean Projects > re-open projects > re-launch Flash Builder without any luck this time..

Download the "FlashPlayer 14 beta global swc" from Download Adobe Flash Player 14 Beta for Desktops - Adobe Labs.
Then add it to eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\frameworks\libs\player\14.0

Missing workflow types in CUP

Similar Messages

Maybe you are looking for