Missing workspace folder
So i was going to install the output module. I noticed that i don't have the workspace folder. What should I do? I really want and need output!
This is a copy of the answer I send in via mail, it seems the new forum format is again a disaster and not able to put mail content in the forum but only a reply window without text...
Read the instructions carefully, some systems have different libraries where you should put the files in. But without details about your version and system there is not much to guess for.
Also read this long thread about the same problem:
https://forums.adobe.com/message/6360911#6360911
Similar Messages
-
Oomph installer directory gets used as workspace folder
Hi there
my product (customized IDE) gets installed and
now also my own projects are setup (although I first had to learn that I need to double-click the setup in the wizard before I can really select my stream and that that was missing).
However, I now face the problem, that always the oomph installers directory gets used as workspace folder for my newly setup custom IDE...
I'm a little lost as how to predefine the workspace to the path where I need the workspace really to be located at.
I could perhaps use Resource Creation in my product setup to override the ini file and placing a
-data
../workspace
in there, but that's somewhat error prone, because other defaults placed by oomph into the default ini will have to be maintained by hand by me, if something changes during later updates.
Cheers
JörgAm 24.07.2015 um 14:21 schrieb Joerg Buchberger:
> Eike Stepper wrote on Fri, 24 July 2015 05:36
>> ...
>> > OK, I can do that. Before that, I'd like to better understand, though,
>> > what exactly is bad about putting an "install.root" variable into the setup.
>> > Because, so far, that seemed good enough for me.
>>
>> The main problem is that the installer may create a VariableTask with the same name in your user.setup and that would
>> override the one in your (product?) setup.
>
>
> Does that mean, a variable in the user.setup will always override the ones from product or project setups?
Yes, always. This way a user can influence the results of the other setup models.
> So, what could make the installer create such a variable in user.setup?
The "install.root" variable is a so called rule variable, i.e., it's induced by the attribute rule that the user picks
for the installation location. You can see that rule at the top of your user.setup once you've done a normal
installation. There's only a handful of such rule variables. All other variable tasks that the installer might create in
your user.setup are always restricted to the scope that originally declared that variable, e.g., the "git.user.id"
variable that's declared in the Eclipse.org project catalog.
Cheers
/Eike
http://www.esc-net.de
http://thegordian.blogspot.com
http://twitter.com/eikestepper -
Using AOM_Package_Win64.zip
I was able to copy “adobe output module” folder to Bridge CC extention.
I could not follow your step3, namely
“Copy the AdobeOutputModule.workspace file into the Workspaces folder under the Bridge CC Extensions folder.”
I do not have a “Workspaces folder under the Bridge CC Extensions folder.”
Within Bridge CC extensions folder I only have Autostacks and the AOM folder that I just copied there.
I have opened Bridge CC and undertaken what you suggested in”possible issues” solution 1 – no changes. I then tried sol 2. There were a number of !!_$$$ workspace files but NOT one called “!!-$$$AdobeOutputModule.workspace file.” ????Thank you for a hint on what to do.
Check this thread and read the instructions of the download carefully. You have two libraries, one at system level and one at user level.
https://forums.adobe.com/thread/1299228 -
Sharepoint Workspace 2010: Absolute path to workspaces folder
I am trying to mount the SharePoint Workspace 2010 workspaces folder on another computer so that I can parse the Excel files stored in it for additional processing. But I am unable to find the full file system path to the workspaces folder. Can someone please
help me find it?
Thanks,
MahmoodHi Mahmood,
According to your description, my understanding is that you want to find the SharePoint 2010 workspace file location.
The workspace data is stored within the users profile. The default location is %localappdata%\Microsoft\Office\14.0\OfficeFileCache. The files in this location don't look like the actual files, and contain
a lot of metadata.
For more information, you can have a look at the blog:
http://office.microsoft.com/en-us/sharepoint-workspace-help/accessing-workspace-data-from-your-file-system-in-sharepoint-workspace-2010-HA010351687.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Missing email folder icon on BBT 9800 - Where did it go and how to return it back?
Missing email folder icon on BBT 9800 - Where did it go?
The email icon on my BB Torch 9800 just disappeared. If I type email in the search button it shows me the greyed out email icon but I can't get the icon back on to my homescreen. How do I get my email icon back? And Unhide All is not an option so icant find it.
Please consider the above on urgent basis as I can't see my work mails.
Thanks,Hi hegazysource and welcome to the BlackBerry Support Community Forums!
Are you using the BlackBerry® Internet Service or BlackBerry® Enterprise Server to receive your email on your device?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Missing workspaces after IllustratorCC (2014) update
Title says it all. After the latest IllustratorCC(2014) update I noticed my normal workspace didn't load. Figured after an update just needed to sync settings...nothing. Then check Ai workspaces folder, just the presets. Even "Time Machined" the Ai workspaces folder, never saw my old workspaces. Not sure if that was where they were originally, but within Illustrator I used to easily pull it up. Are they gone? Any help will be greatly appreciated.
ThanksI could fix this by accident. I am on Mac. Quit Illustrator. Go to … Users/Your_Username/Library/Preferences/Adobe Illustrator 18 Settings/Your_Language. Inside this folder is a folder called Changed Workspaces. The Workspaces folder is for whatever reason empty. Move the Workspace File you can't access within Illustrator to your Desktop. Start Illustrator, quit Illustrator. Move the file back into this folder. Start Illustrator again. In my case all workspaces appear now correctly.
-
Error when creating Workspace folder
Hi SDN's,
I am trying to create a workspace folder using the steps mentioned in the following link: http://help.sap.com/saphelp_nw04s/helpdata/en/31/0fdf3f3e054e1de10000000a155106/frameset.htm
i have executed dtrshell.bat in the command line and it shows the following lines on the command screen:
C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.tssap.dtr.client.vfs_2.0.0>dt
rshell.bat
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-client to select the "client" VM
-server to select the "server" VM
-hotspot is a synonym for the "client" VM [deprecated]
The default VM is client.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-version:<value>
require the specified version to run
-showversion print product version and continue
-jre-restrict-search | -jre-no-restrict-search
include/exclude user private JREs in the version search
-? -help print this help message
-X print help on non-standard options
-ea[:<packagename>...|:<classname>]
-enableassertions[:<packagename>...|:<classname>]
enable assertions
-da[:<packagename>...|:<classname>]
-disableassertions[:<packagename>...|:<classname>]
disable assertions
-esa | -enablesystemassertions
enable system assertions
-dsa | -disablesystemassertions
disable system assertions
C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.tssap.dtr.client.vfs_2.0.0>
after this i have used the command <b>mkws F w /Test</b>
output for that command as:
C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.tssap.dtr.client.vfs_2.0.0>mk
ws -F -w /Test
'mkws' is not recognized as an internal or external command,
operable program or batch file.
C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.tssap.dtr.client.vfs_2.0.0>
here is the coding for my <b>dtrshell.bat</b>:
@echo off
rem Run DTR Commandline Shell:
rem -
rem (1) Get it running:
rem -
rem - Adapt configuration settings in setvars.bat.
rem - Uncomment the settings for the used archives
rem that fit to the currently used Netweaver Developer Studio.
call setvars.bat
set CLASS_PATH=
rem (2) Used Archives Settings:
rem -
rem Used Archives in 6.40 and 7.00 Netweaver Developer Studio installation:
rem -
set CLASS_PATH=%CLASS_PATH%;.\lib\vfs.jar
set CLASS_PATH=%CLASS_PATH%;.\lib\http.jar
set CLASS_PATH=%CLASS_PATH%;sap.comtcdidtrclientcommandline~library.jar
set CLASS_PATH=%CLASS_PATH%;.\lib\propagation.jar
set CLASS_PATH=%CLASS_PATH%;.\lib\admin.jar
set CLASS_PATH=%CLASS_PATH%;.\lib\deltav.jar
set CLASS_PATH=%CLASS_PATH%;.\lib\util.jar
rem Used Archives from foreign Plugins:
set CLASS_PATH=%CLASS_PATH%;..\com.tssap.sap.libs.xmltoolkit_2.0.0\lib\sapxmltoolkit.jar
set CLASS_PATH=%CLASS_PATH%;..\com.tssap.sap.libs.logging_2.0.0\lib\logging.jar
set CLASS_PATH=%CLASS_PATH%;..\com.sap.tc.jarm_2.0.0\lib\jARM.jar
rem (3) Run DTR Commandline Shell:
rem -
java -classpath %CLASS_PATH%,%DEFAULT_PROPERTIES%,com.tssap.dtr.client.commandline.DTRShell %*
Please suggest me to solve this error.
Regards,
Sireesha.BHi Sireesha,
java -classpath %CLASS_PATH%,%DEFAULT_PROPERTIES%,com.tssap.dtr.client.commandline.DTRShell %*
Are there really commas in that line? If yes, replace them with space characters.
Regards,
Marc -
Cannot specify Workspace folder with MVMC PowerShell module
I’m currently working with a customer to migrate them from VMware to Hyper-V. I’m using MVMC PowerShell automated with Service Management Automation in Azure Pack. The process is working well, but I’ve hit a roadblock:
When using the MVMC GUI, the user has the option to specify a Workspace folder, which temporarily stores the VMDK file exported from VMware;
The option to specify a Workspace folder does not seem to be exposed to the MVMC PowerShell module (specifically the ConvertTo-MvmcVirtualHardDiskOvf cmdlet)
The impact of this in the context of SMA is that the MVMC module uses
C:\Program Files\Microsoft System Center 2012 R2\Service Management Automation\MVMC on the runbook worker as the temporary storage
The C:\ partition fills up and the OVF export hangs/fails
I didn’t uncover this problem in my lab as I was using test machines which were quite small, so the temporary files fit on the C:\ partition. However, the customer is using larger servers with multiple disks, so now the problem has arisen.
Is there a way to specify a Workspace folder for the ConvertTo-MvmcVirtualHardDiskOvf cmdlet so that I can avoid this issue? The combination of MVMC and SMA is working really well, and it would be a shame to have to ditch the process because of this
one problem.I ended up provisioning another runbook worker, installing SMA to a large D:\ partition so that it would be used as the temporary storage for the Convert-MvmcVirtualHardDiskOvf process.
Bit of a messy workaround - would have been much neater to handle all of this using a simple switch for the cmdlet. -
Missing user folder from Workspace and FR studio
Hi All,
Recently we upgraded the workspace and applications... Initially there were all the folders, but i noticed that user folder from workspace and FR studio was missing... If anyone have come across this issue please let me know how to solve it.
Awaiting for response, Thanks in advanceJust to make sure I understand. When you double click the hard drive icon either in the sidebar or on your desktop (if you have it shown there) there is no users folder shown? If that is the case then it must somehow have become invisible. If there was in actuality no user folder at all your Mac would not boot.
If that is the case then you may have to use the terminal to get it back. I can't help you with that though, sorry. Another possibility is that there is some sort of corruption in a cache file. You could use a tool such as YASU or others to do a light cache cleaning which may solve the problem. -
InDesign CS4 launches with missing workspaces, keyboard shortcut sets, etc
Due to the mixture of multiple issues in this thread:
http://www.adobeforums.com/webx/.59b6c639/
I'm starting this as a new topic to focus on the cases where InDesign CS4 users are able to launch and use the product, but are missing resources such as the following types of presets: Workspaces, Keyboard Shortcut Sets, and Swatch Libraries.
All reports of this issue appear to be related to user permissions. For these resources to to be accessed you must be running InDesign CS4 with an account that has read/write access to the following folder, including it's subfolders and all of their content:
C:\Program Files\Adobe\Adobe InDesign CS4\Presets
If you have a setup where you are running into problems getting resources from this folder to appear in InDesign CS4, and you believe your user account has read/write permissions to all of it's contents, please let me know as I'd like to work with you to find a solution.The complete fix from start to finish for my problem (InDesign CS4 launching without toolbars or keyboard shortcuts when logged on without Administrator priviliges) is below. It's actually quite simple once you know how... The problem is just getting all of the information in the same place. Hopefully it will help others having the same problem.
1. Install CS4 from the 2 installation CDs. Allow a couple of hours from start to finish.
2. Log on with an Administrator account:
a. Navigate to “C:\Program Files\Adobe\”.
b. Right-click on the folder named “Adobe InDesign CS4”
c. Click Properties
d. Click on the Security tab
e. Change permissions for Users to Full Control
f. Click on the Advanced button and ensure that there is a check in both of the boxes (inherit and replace permissions).
g. Click Apply to reflow the permissions
h. Click OK twice.
3. Navigate to the following locations and rename each of the EN_UK folders to EN_US:
a. C:\Program Files\Adobe\Adobe InDesign CS4\Presets\InDesign Workspaces\
b. C:\Program Files\Adobe\Adobe InDesign CS4\Presets\Page Sizes\
c. C:\Program Files\Adobe\Adobe InDesign CS4\Presets\Start Page\
d. C:\Program Files\Adobe\Adobe InDesign CS4\Presets\InDesign Shortcut Sets\
4. With a user account, launch Adobe InDesign CS4 and immediately hold down Shift, Control and Alt together. Click Yes to delete the InDesign Preference files. -
Missing draft folder in mac mail
My draft folders in my mac mail seem to have disappeared. I have three email accounts and they all are missing. How do I find them?
If there is nothing in a draft folder, it is not present.
If there was something in the folders, Time Machine would have a copy.
Barry -
Missing System Folder in Classic
I really need some help here
Purchased an I BOOK G4 notebook .. mostly as a back up for some graphic programs.
It is running a clean copy of OS X version 10.4.11
Classic is missing the system folder and as a result i cant seem to install anything???
Do not have any OS disks with the machine
What are my options??Hello, and welcome to Apple Discussions!
You will need a source for a valid and installable OS 9.2.2 system for use
as Classic before you can install and use any pre-OS X applications...
And you really need to have an OS X (tiger 10.4) retail or correct install
disc set to support and maintain the system, and its license in the iBook.
The computer model shipped with a machine specific series of install-restore
discs and the OS 9.2.2 Classic would have been on one of them; usually not
the main disc, that has OS X installers on it. Since that computer did not boot
OS 9.2.2, the installer would be specific to the computer; about the only way
to get an OS 9 from an optional OS X install disc, if you have software but no
computer, the OS X has to see and recognize an appropriate installer, though.
Since OS X is primary and OS 9 does not boot an iBook G4, you have to find
a way to install OS 9.2.2 by drag and drop; or get ahold of a correct original
install-restore disc set for that computer from some online source. There is a
small chance that someone may have the right one for your build model iBook
Used to be, you could call Apple sales support at 1-800-MY-APPLE and ask to
speak to a product specialist about replacement original discs for the iBook G4
and provide them with the product's serial number, and order a new replacement
set of install discs, for a reasonable fee. The correct Apple Hardware Test is on
those discs, so that was the best deal going. The original software could have
been a version of Panther 10.3.9, and if the computer CPU was faster than
800MHz it would not dual boot OS 9 and OS X. This is where details matter.
You may be able to identify your iBook by serial number by using the search
link in everymac.com, to help find which iBook G4 model it really is, and then
know more about upgrading it, getting replacement or upgrade software, and
other important facts. Such as what Apple Hardware Test was in original s/w.
Any other OS 9.1 or 9.2(.1) install disc would not work, since they either would
be for some other computer and made to install when booted (C key held on start)
or, would be too old for the direct install method to work, it won't under OS X if
not the correct disc set for the computer.
You may be able to find a way to install an OS 9.1 or OS 9.2 on an external HDD
or flash USB drive, and update it to OS 9.2.2 using download update files, and
then copy (drag/drop) it into an iBook G4, for use as non-boot Classic 9.
On a trial basis and to test some hardware, I was able to use a newer iBook G4
second install disc which contained an OS 9.2.2 install, and use it as Classic in
a different computer running OS X, by use of Pacifist utility. This takes a packet
of data out of the disc and then installs it from the desktop, directly. It can work.
But there are so many variables some of the things that Could Work, may Not.
Some suggest you may be able to make a copy of a working OS 9.2.2 system
folder and an Applications 9 folder from a working computer and use them as
Classic in some other OS X PPC model of Mac that does not boot OS 9.2.2.
You may be able to use a USB flash drive to copy an OS 9.2 system and its
applications (9) folder. You may even be able to test it as a working idea,
while it still is on the USB memory drive; by pointing the Classic preference
panel (in System Preferences) to look for a Classic system there. Or drag
and drop it into the computer. The good about old OS 9.2 & before, is the
simple way to move a system around; and OS X won't allow that method.
And of course, OS X 10.5 Leopard can't use an OS 9.2.2 Classic.
The original install disc set would be the best bet. Is there any chance the seller
may have misplaced the software set belonging to the computer you bought?
These are considered a part number of the computer, as such, part of the sale.
If bought from a company who fixes and resells computers, do they offer any
optional software for an additional fee? The discs should be included, but in
several instances, people buy a computer second-hand and have no software.
You may have to contact resellers and maybe even auction sites, once you can
identify the exact set of software you need; companies such as welovemacs or
others you can search for may have something; most are overpriced, to me.
The ebay auction tales are enough to scare me into keeping the original discs
and include them when I forward the computer to some other future user.
I have not bought any replacement software online, and OS 9.2.2 installers for
a specific OS X running computer, to be used as Classic, narrow the field; since
the OS 9 system installer on iBook disc media is often made for that model.
Well, I have ideas. And they seem to work better for me in person than when
I've told some persons about them online. Just as well, if there's some glitch
you can avoid by finding the correct discs (in the land of plenty) that's good.
To *search " OS 9.2.2 install CD " in google* may bring up some choices,
but I have no experience with retail resellers of old or used software.
In a few cases, if you get very good at identifying iBook G4s, you may
be able to find a broken one exactly like yours with the original software.
These should be relatively inexpensive; but have very limited use discs.
Hope this may help, somewhat...
Good luck & happy computing!
+PS: I think I need a little more coffee!+ -
Missing flex folder in the FDS
Hi,
In the FDS2 installation am unable to find the flex folder. I
am reinstalling the fds2. In the first installation flex folder was
there but not in the second installation.
Thanks
Sunhi
I installed Flex Data Service . When i look into the
directory structure FDS, Flex directory is missing. with out flex
directory its hard to create j2ee applications using flex..
Sun -
Missing Movies Folder in Sidebar
When opening a Finder window, one of my sidebar folders is missing. I have the Applications, Documents, Pictures, Music and User folders, but the Movies folder is nowhere to be seen. I tried searching for it in Spotlight and got nothing. Because of this, I have no Movies directory to save my iMovie projects in. How can I take care of this problem?
The special icon is automatically given by the Finder to a folder named Movies that resides in the users home folder, and automagically gives it the cool custom icon in the Sidebar when it is dragged there. People have been known to mess this up by pasting an icon on the folder themselves. Sometimes a restart of the Finder or the computer may be necessary to get the custom icon to display. There are a number of folders that the Finder treats this way in the home folder.
Francine
Francine
Schwieder -
Missing file folder in LR2.7 -- how to locate
After a crashed and replaced hard drive, many catalogs no longer refer to a file or folder at its correct location. Clicking on the "?" in the library modcule and then the "find missing folder or file", only leads me to the message that the file already exists. How can I find it to re-establish the link?
What you want to do is click on the folder instead of the image.
In the left hand menu, click on the top most folder (left most if more than one) and you should get an option to reconnect or find missing folder.
Browse to the new location and select.
If you click on the top most, it will reconnect everything below it.
A number of us use only one top most folder for this reason; it helps when moving images around or something.
Cheers!
Maybe you are looking for
-
How to create monthly table creation?
Hi Mates, Unable to create table by month in analytic database but load the data to the previous table continuous as attached screenshot, Schema user has the creation privilege. We are using Webcenter interaction 10gR4. How to create monthly table cr
-
User login takes several minutes In OBIEE
Dear Expert, I have a Issue in OBIEE 11g, when we login to Analytic we have take a several minutes :-s, we are using Database authentication not Ldap. Can you please advise me ?
-
Letter of Appreciate to Devs, and two requests
Now that the nouveau and NVidia junk has been sorted out, I'm back to Arch. (I use it for my consulting business, when the graphics work that is) I want to say Thank You, to the developers for all their hard work. They get yelled at all too often,
-
CRES html email attachments not working after upgrade to Exchange 2010
We have just upgraded from Exchange 2003 to Exchange 2010. No other changes have been made to our network. No changes were made to user workstations. Now when users receive emails from Cicso Registered Envelope Service the HTML file attachments se
-
I want to forward a message with the default headers included, but can't seem to set my mail preferences to include the headers when forwarding, just the original message ends up in the forwarded message and not the headers? What I'm trying to do is