Missing +x perm error after changed Dovecot partition-default

failed: Permission denied (euid=214(_dovecot) egid=6(mail) missing +x perm: /Volumes/PEGASUS, dir owned by 0:0 mode=0770)
This after I changed the imap:partition-default location to a directory on an external volume.
I reviewed permission on the default location of the Server OS volume. Used chown and chgrp to match user and group permissions.
The server works when I revert imap:partion-default to /Library/Server/Mail/Data/mail
What is the "missing +x perm"? and the command to apply it?
I'm thinking I need to "touch" the directory but need clarification.

Started fresh. I recreated a directory at the root of the external volume. I created this directory as sudo via CLI. Set the permissions as _dovecot:mail with 775.
Then I stopped Mail service via CLI. Then updated my config to point to the new directory via CLI. Then started Mail service via CLI. Verified mail_location using doveconf -n command. It was pointing to the new location. Then initiated IMAP reception of email.
Same error message. Error occurs when mail attempts to initialize the user's mail directory: (I changed identity details within the snippet)
imap(pid 75337 user myuser): Error: user myuser: Initialization failed: Initializing mail storage from mail_location setting failed: stat(/Volumes/PEGASUS/mailarchive/mail/6622A4BF-F9FE-4F8D-8EBB-9D080FF614FD) failed: Permission denied (euid=214(_dovecot) egid=6(mail) missing +x perm: /Volumes/PEGASUS, dir owned by 0:0 mode=0770)
Jan 22 14:09:30 server.myclient.com log[75283]: imap(pid 75337 user myuser): Error: Invalid user settings. Refer to server log for more information.
So then I stop mail service and change the config's mail_location to original installation default (/Library/Server/Mail/Data/mail) and no permissions errors -- incoming mail goes into the user's mail folder.
Is the error specific to the volume /PEGASUS? and thus initialization cannot traverse the path -- gets stuck at the volume?
Mountain Lion Server 10.8.2 First time using Mail service.

Similar Messages

Error after changing password in Discoverer Viewer (11.1.1.4)

I (and all other users) get the below error after changing the password used to login to Discoverer Viewer...
Weblogic Version 10.3.4
Discoverer Version 11.1.1.4
Error
The application encounters an invalid state. .
- java.rmi.RemoteException: ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1 ; nested exception is: oracle.discoiv.beans.ConnectionStoreException: ORA-6510: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1
I have already tried the following oracle note (which did not work): http://docs.oracle.com/cd/E17904_01/doc.1111/e14770/discoverer.htm#BABDJJBE
"43.1.1 Issues with Metadata Repository and Oracle Database 10g Release 1"
But we have Oracle Database 11g.
If anyone has any suggestions please advise. I have had a ticket open with Oracle Support now for a few months and they cannot reproduce.
Thanks,
Justin

We also see this same error when attempting to Create a Connection in Oracle BI Discoverer 11g. I am able to connect to a database but not able to save a connection to said database....
A connection error.
- Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
- ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1

Unknown server error after changing password, solutions on support side don't work

After changing my password I get the "unknown server error". I already tried the solutions on the support side, but it won't work.
My system is Win 7.
I'd be so glad for any ideas,
thanks

Thanks for your answer. Yes, i already tried these solutions (more than
once!) but I still get the error and can't connect to the cloud.
I'd be so glad for any ideas!
Thanks in advance, take care,
Ulinna
2013/10/11 Arpit Kapoor <[email protected]>
Re: Unknown server error after changing password, solutions on support
side don't work created by Arpit Kapoor<http://forums.adobe.com/people/Arpit+Kapoor>in
Adobe Creative Cloud - View the full discussion<http://forums.adobe.com/message/5753065#5753065

ORA-12545 error after changing the host name as IP address in Tnsnames.ora

HI,
I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....

12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.
Seems you specified wrong IP address.

One Key Recovery not Operation-able after Changing C-Partition Size (IdeaCentre B300)

I am using an IdeaCentre B300 All In One PC.Because of shortage of space for my Programs, I had extended the volume of The 'C' Partition. However, I did not know that this would result in my Recovery Partition becoming Unoperationable.
When I repeatedly press F2 on boot, the Windows Error Options open up with Options to Start Windows Normally, Safe Mode, etc. etc. How do I make my Recovery Partition work again because I desperately need to restore my Computer. (Windows 7 Home Basic)

Welcome to the Lenovo Community !
Please check out this Lenovo Knowledge Base article.......
https://forums.lenovo.com/t5/Lenovo-A-B-C-N-S-Flex-and/Recovery-F2-no-longer-working-after-changing-partitions-on/ta-p/452173

Error after change J2sdk1.3 to j2sdk1.4

It's happend after change J2sdk1.3 to j2sdk1.4.
I have JTree and JList in the left JTabbedPane and HTMLViewer in the right JTabbedPane.
When i select anything in the JTree i recived records in the JList, select any records in the JList and right JTabbedPane open. When i again select JTree in the left JTabbedPane i recived next error:
How to solve this problem?
s2 SCO
s ProFTPD
Questions and Answers
Point 2
0
0
Point 3
Point 4
i 5
f c:/15.html
str file:///c:/15.html
suffix html
Attempted to read a bad URL: file:/c:/15.html
s2 Solaris
s Samba
Questions and Answers
Point 2
1
java.lang.NullPointerException
at QAGui$ValueReporter.valueChanged(QAGui.java:42)
at javax.swing.JList.fireSelectionValueChanged(JList.java:1318)
at javax.swing.JList$ListSelectionHandler.valueChanged(JList.java:1332)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:187)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:167)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:214)
at javax.swing.DefaultListSelectionModel.removeIndexInterval(DefaultListSelectionModel.java:544)
at javax.swing.plaf.basic.BasicListUI$ListDataHandler.intervalRemoved(BasicListUI.java:1560)
at javax.swing.AbstractListModel.fireIntervalRemoved(AbstractListModel.java:160)
at javax.swing.DefaultListModel.clear(DefaultListModel.java:490)
at QAGui.valueChanged(QAGui.java:203)
at javax.swing.JTree.fireValueChanged(JTree.java:2402)
at javax.swing.JTree$TreeSelectionRedirector.valueChanged(JTree.java:2773)
at javax.swing.tree.DefaultTreeSelectionModel.fireValueChanged(DefaultTreeSelectionModel.java:629)
at javax.swing.tree.DefaultTreeSelectionModel.notifyPathChange(DefaultTreeSelectionModel.java:1071)
at javax.swing.tree.DefaultTreeSelectionModel.setSelectionPaths(DefaultTreeSelectionModel.java:287)
at javax.swing.tree.DefaultTreeSelectionModel.setSelectionPath(DefaultTreeSelectionModel.java:170)
at javax.swing.JTree.setSelectionPath(JTree.java:1178)
at javax.swing.plaf.basic.BasicTreeUI.selectPathForEvent(BasicTreeUI.java:2190)
at javax.swing.plaf.basic.BasicTreeUI$MouseHandler.handleSelection(BasicTreeUI.java:2818)
at javax.swing.plaf.basic.BasicTreeUI$MouseHandler.mousePressed(BasicTreeUI.java:2779)
at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:218)
at java.awt.Component.processMouseEvent(Component.java:5018)
at java.awt.Component.processEvent(Component.java:4818)
at java.awt.Container.processEvent(Container.java:1380)
at java.awt.Component.dispatchEventImpl(Component.java:3526)
at java.awt.Container.dispatchEventImpl(Container.java:1437)
at java.awt.Component.dispatchEvent(Component.java:3367)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3214)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:2926)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2859)
at java.awt.Container.dispatchEventImpl(Container.java:1423)
at java.awt.Window.dispatchEventImpl(Window.java:1566)
at java.awt.Component.dispatchEvent(Component.java:3367)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:445)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:130)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
It's code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.tree.*;
import javax.swing.event.*;
import java.io.*;
import java.net.*;
import java.util.*;
import javax.swing.text.html.*;
public class QAGui extends JFrame implements TreeSelectionListener {
     Controller m_parent;
     ReadInfo r;
     private JTree tree;
     private JList list;
     private DefaultListModel list2;
     private String s;
     private URL questionURL;
     public static String prefix ="E:/LIBRARY/";
     private JSplitPane pane;
     Container content;
     private JScrollPane treeView;
     private DefaultMutableTreeNode top;
     private JTextField answer;
     private JEditorPane htmlPane;
     private String initialURL;
     private JScrollPane scrollHtml;
     private JTabbedPane tabbedPane;
private class ValueReporter implements ListSelectionListener{
     String suffix;
     public void valueChanged(ListSelectionEvent event) {
          if (!event.getValueIsAdjusting())
               s=list.getSelectedValue().toString();
               String f=r.getFile(s);
               String str=new String("file:///"+f);
               int i=f.lastIndexOf('.');
               if(i>0 && i<f.length()-1)
                    suffix=f.substring(i+1).toLowerCase();
System.out.println("i " +i);
System.out.println("f " +f);
System.out.println("str " +str);
System.out.println("suffix " +suffix);
               if(suffix.equals("html")||     suffix.equals("htm"))
               try {
                    questionURL=new URL(str);
                    displayURL(questionURL);
                    tabbedPane.setSelectedComponent(scrollHtml);
               catch (java.net.MalformedURLException exc) {
                    System.err.println("Attempted to create a BookInfo " + "with a bad URL: " + questionURL);
                    questionURL = null;
               catch(IOException e1){
                    System.out.println("error");
               else if(suffix.equals("pdf"))
               displayPDF(f);
               else if(suffix.equals("doc"))
               displayDOC(f);
public QAGui(Controller p_parent) {
     super("Questions and Answers");
     WindowUtilities.setNativeLookAndFeel();
//     WindowUtilities.setMotifLookAndFeel();
//     WindowUtilities.setJavaLookAndFeel();
     addWindowListener(new ExitListener());
     content=getContentPane();
     r=new ReadInfo(deffile,false);
     m_parent=p_parent;
     treeInit(true);
     paneInit();
     guiInit();
     menuInit();
     this.setSize(800, 700);
     this.setVisible(true);
private void displayURL(URL url) {
     try {
               htmlPane.setPage(url);
     catch (IOException e){
               System.err.println("Attempted to read a bad URL: " + url);
private void guiInit() {
     JScrollPane treeView = new JScrollPane(tree);
     list2=new DefaultListModel();
     list = new JList(list2);
     list.addListSelectionListener(new ValueReporter());
     JScrollPane right = new JScrollPane(list);
     treeView.setMinimumSize(new Dimension(0,0));
     right.setMinimumSize(new Dimension(0,0));
     pane = new JSplitPane( JSplitPane.HORIZONTAL_SPLIT,treeView , right);
     pane.setDividerLocation(200);
     pane.setOneTouchExpandable(true);
     tabbedPane.addTab("Themes and Questions",pane);
     tabbedPane.addTab("Answers",scrollHtml);
     content.add(tabbedPane, BorderLayout.CENTER);
private void menuInit() {
     JMenuBar jmb = new JMenuBar();
     JMenu myMenu = new JMenu("File");
     JMenu myMenu2 = new JMenu("Help");
     JMenuItem fileDefault = new JMenuItem("Default ...");
     JMenuItem fileNew = new JMenuItem("New ...");
     JMenuItem fileOpen = new JMenuItem("Open ...");
     JMenuItem exitAppl = new JMenuItem("Exit");
     fileDefault.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e) {
               m_parent.dispatchEvent("DEFAULT");
     exitAppl.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e) {
               m_parent.dispatchEvent("EXIT");
     fileOpen.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e) {
               m_parent.dispatchEvent("OPEN");
     myMenu.add(fileDefault);
     myMenu.add(fileNew);
     myMenu.add(fileOpen);
     myMenu.addSeparator();
     myMenu.add(exitAppl);
     jmb.add(myMenu);
     jmb.add(myMenu2);
     content.add(jmb, BorderLayout.NORTH);
private DefaultMutableTreeNode processHierarchy(Vector hierarchy) {
     DefaultMutableTreeNode node=new DefaultMutableTreeNode(hierarchy.elementAt(0));
     DefaultMutableTreeNode child;
     for(int i=1;i<hierarchy.size();i++)
          Object nodeSpecifier=hierarchy.elementAt(i);
          if(nodeSpecifier instanceof Vector)
               child=processHierarchy((Vector)nodeSpecifier);
          else
               child=new DefaultMutableTreeNode(nodeSpecifier);
               node.add(child);
     return (node);
public void readNewFile(String file2) {
     r=new ReadInfo(file2,true);
     treeInit(false);
     public void valueChanged(TreeSelectionEvent event) {
     DefaultMutableTreeNode s=(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
     if(s!=null)
     TreeNode s2=s.getParent();
System.out.println("s2 "+s2);
System.out.println("s "+s);
     System.out.println(ReadInfo.root);
          if (!(s2.toString()==ReadInfo.root))
          r.getQuestions(s2.toString(),s.toString());
System.out.println("Point 2");
System.out.println(list2.getSize());
          list2.clear();
System.out.println(list2.getSize());
//          list2.removeAllElements();
System.out.println("Point 3");
          for (int i=0;i<r.dataquestions.size();i++)
System.out.println("Point 4");
          list2.addElement(r.dataquestions.elementAt(i));
private void paneInit() {
     tabbedPane=new JTabbedPane();
     answer=new JTextField();
     try {
          String str=new String("file:///"+prefix+"main.htm");
          URL url=new URL(str);
          htmlPane=new JEditorPane();
          HTMLEditorKit kit=new HTMLEditorKit();
          htmlPane.setEditorKit(kit);
          htmlPane.setContentType("text/html");
          htmlPane.setPage(url);
          htmlPane.setEditable(false);
          scrollHtml=new JScrollPane(htmlPane);
     catch(MalformedURLException e){System.out.println("url fausse");}
     catch(IOException e1){System.out.println("fichier pas trouve");}
     }                              static String deffile="default.qaf";private void treeInit(boolean s) {
     top= processHierarchy(r.datasubthemes);
     if(s) {
//----first init tree--------------------
               tree=new JTree(top);
               tree.addTreeSelectionListener(this);
     else {
//----reload tree when open new file-----
               htmlPane.setEditable(false);
               DefaultTreeModel treeModel = (DefaultTreeModel)tree.getModel();
               treeModel.setRoot(top);
               treeModel.reload();
//               list2.clear();
               list2.removeAllElements();
               tree.addTreeSelectionListener(this);
public void displayDOC(String file) {
     Runtime rt = Runtime.getRuntime();
String[] callAndArgs = { "C:\\Program Files\\Microsoft Office\\Office\\winword.exe",
     file };
try {
Process child = rt.exec(callAndArgs);
child.waitFor();
catch(IOException e) {
System.err.println( "IOException starting process!");
catch(InterruptedException e) {
System.err.println( "Interrupted waiting for process!");
public void displayPDF(String file) {
     Runtime rt = Runtime.getRuntime();
String[] callAndArgs = { "C:\\Program Files\\Adobe\\Acrobat 5.0\\Acrobat\\Acrobat.exe",
     file };
try {
Process child = rt.exec(callAndArgs);
child.waitFor();
catch(IOException e) {
System.err.println( "IOException starting process!");
catch(InterruptedException e) {
System.err.println( "Interrupted waiting for process!");

Hi
Realy would want to be of help - but I can't see where the problem originates.
I would - just to omitt the obvious
• trash pref files - iMovies and iDVDs
• run - repair permissions
• Start a new - User account and log into this and see if things works better here
• Free space on Start-Up hard disk > 25Gb - I never go under
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Turn off Mac and disconnect Mains/Power for 20-30 minutes - will at least re-set FW-port
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09 or 11)
• Problems in iPhoto Library can affect iMovie to crash on start-up. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• iMovie updated ?
• QuickTime updated ?
• Mac OS version ?
Just to try to pin point the problem.
Yours Bengt W

SMC Error after change hostname. Solaris9/Sparc

Hello friends:
We have a little problem with Solaris Management Console after changing out hostname in Solaris9/Sparc.
After change de hostname using sys-unconfig, we had to go to Console -> Preferences -> Home Toolbox location and change the hostname of our host. After doing this S.M.C. began to run another time....OK
Now it runs all OK, but we can see the next error inside the left toolbar:
LegacyAppTool.client.LaunchLegacyAppTool
Clicking on it we can see:
The specified host machine could not be resolved into a valid IP address.
In the toolbar we can see .... host not found.
How you can see S.M.C. continues looking for our old hostname for something.
Where could we change it?
What do we have to do to delete this error? ( we like the perfection ;) )
We have been looking for it, but has been impossible.
A lot of thank's.

If you go to /var/sadm/smc/toolboxes/this_computer and edit the this_computer.tbx XML file, you'll notice that the last section in the end of the file looks something like this:
<Tool TreeDisplay="false">
    <Name>Terminal</Name>
    <ServerName>unknown</ServerName>
    <ClassName>LegacyAppTool.client.LaunchLegacyAppTool</ClassName>
    <Properties>
      <Key>Name</Key> <Value>Terminal</Value>
      <Key>Type</Key> <Value>XAPP</Value>
      <Key>Command</Key> <Value>/usr/dt/bin/dtterm</Value>
    </Properties>
</Tool>Change the key <ServerName>unknown</ServerName> with <ServerName><?server ?></ServerName> and you won't not see the same error in SMC.
This also happens with Solaris 10.

Error after changing datasource

Hi Experts,
one of our test systems (IDES) with doule stack including NW Portal is connected to the client 001.
As we have a lot of users in the client 800 we want to change the configuration of the UME to client 800.
We used this SAP Help Link:
[Configuring the UME to Use an AS ABAP as Data Source|http://help.sap.com/saphelp_nw70/helpdata/de/9e/fdcf3d4f902d10e10000000a114084/content.htm]
After changing the Client in the useradmin page of the J2ee UME configuration - a connection test runs successfully.
But after restarting the server:
Server is stopped - Dispatcher is running but no server connected.
dev_jcontrol:
[Thr 3440] JControlICheckProcessList: process server0 started (PID:2008)
[Thr 3440] Mon Sep 29 16:34:14 2008
[Thr 3440] JControlICheckProcessList: process server0 (pid:2008) died (RUN-FLAG)
[Thr 3440] JControlIResetProcess: reset process server0
[Thr 3440] JControlIResetProcess: [server0] not running -> increase error count (4)
[Thr 3440] JControlICheckProcessList: running flight recorder:
std_server0.out
[Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started.
Sep 29, 2008 4:34:12 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_39] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.
dev_server0
[Thr 5748] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 6092] Mon Sep 29 16:34:09 2008
[Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
[Thr 5064] Mon Sep 29 16:34:12 2008
[Thr 5064] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 5064] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
My first thougts were to check the RFC/JCo connections - so I changed the configuration to the old one via ConfigTool - UME.Services - restarted the J2EE engine.
Log to SM59 and Configtool. I regenerated the JCo Connection for sapfallback (was not available) and to the portal itself - Tested the connections in SM59 TCP/IP - successfully tested.
So i tried the changes again (client 800)- with the same errors as above?
Any idea what causes this misbehaviour? Or is the SAP help link only for initial setting of UME? Are there additional steps when changing from one ABAP Host (or client) to another?
Thanks in advance
kind regards
Tom

Sometimes I`m a mess!
Look at default trace error:
#1.5 #005056827C490074000002DB00000A08000451F31E6385D7#1216004535546
#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.R3Persistence][md=populatePrincipalDatabag(AttributeList)][cl=null]
#J2EE_GUEST#0##n/a##2ce6913050ba11dd8d2d005056827c49#SAPEngine_Application_Thread[impl:3]_6##0#0#Error##Java###
An exception was thrown in the UME/ABAP user management connector. This exception might be caused by incorrect user input.
It is written to the trace to assist incident analysis by SAP. Only messages also appearing in the log require administrator assistance.
[EXCEPTION]
#1#com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner '127.0.0.1:sapgw00' not reached
TIME        Mon Jul 14 05:02:15 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     82
     at com.sap.security.core.persistence.datasource.imp.r3persistence.R3JCo640Proxy$Client640.execute(R3JCo640Proxy.java:465)
     at com.sap.security.core.persistence.datasource.imp.R3Persistence.doBapiUserGetDetailInternal(R3Persistence.java:5238)----
Any ideas?
kind regards
Tom
Update:
- the host file contains localhost and service file contains sapgw00 with 3300/tcp?
- the java stack runs unter https, http is only available for localhost, may this be the problem?
- Which JCo connection causes this error - actually there are three JCo Connections maintained in VA - .. - JCo RFC Provider - NONE of them connects to localhost??
Edited by: Tom Uhl on Oct 10, 2008 10:12 AM

Radius errors after changing servers

Hi,
I'm still trying to get access so I cannot relate the exact error message, but after changing a 5508 to use a Server 2012 Radius server (from Server 2008), the 5508 is showing error messages about it cannot contact the Radius server even though it can ping the Radius server and authentication is working from the new radius server.
The 5508 is running older 7.0x code. Is that the cause of the messages?
Thanks.

Software version shouldn't affect it. Have you checked the necessary ports (1645,1646,1812,1813) and the Shared Secret? And have you checked the new RADIUS box has all of the correct rules,, EAP Types and Certs that you need?
Sent from Cisco Technical Support iPad App

Permissions errors after clean installation of 10.7.2

hey, I'm sorry for the length of this thread.
after upgrading to Lion (via mac app store) from the newest snow leopard, the system's performance had become worst.
then, i decided to back up all of my files manually and do a clean install making a lion 10.7.2 bootable DVD from the .dmg file I purchased, and converting a USB flash drive to the lion recovery disk assistant.
I decided not to back up anything (including user) using time machine and migration assisnant.
after finishing with this process I've created a new administrator user and verified and repaired disk & permissions, and then moved back all of my data from an external HDD. putting everything back to place where it was before formatting, and changing all of the system preferences, apple software (iTunes, Safari, iPhoto, Finder) one by one.
of course, software updates, restarts.
I've done a few things that I might shoudn't do:
copying the entire 'Music' folder of my user with all of its contents like 'iTunes Library Extras.itdb', 'iTunes Library Genius.itdb', 'iTunes Library.itl', 'iTunes Music Library.xml'.
after that I also did itunes file > import playlist > Library.xml (which i exported to external HDD before formatting).
unfortunately, something has got very wrong with this process. now these brand new awful issues came up:
1. everytime after logging in/restarting, it seems like the Finder 'doesn't remember' the changes i have made. and I have to manually change it back:
- menu bar is going back to default (brings back BlueTooth and Time Machine's icons, for example)
- the dock comes back to the default (only apple apps in the specific order, the stock icon beside the trash comes back to be Documents, etc.)
- expose gestures are disabled again (like the default)
2. repeatedly, every time when opening iTunes i see the Software License Agreement, scroll down, agree and iTunes refreshes itself to the default pref (with the ping window and 'iTunes Tutorials' splash screen, prefs like "prevent devices from syncing automatically" are disabled again etc.)
the itunes album artwork screensaver says - there are no album artworks in your itunes library.
3. on Safari, it basicly does the same as with itunes. 'forgets' all the changes. (bookmarks, bookmarks bar is reverted to the default apple,yahoo,googlemaps, forgets the homepage).
4. iphoto - 'iphoto has detected inconsistencies in your library' every time.
Then, with DU i performed a permissions verify:
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/WatchFolderName.strings ”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/English.lproj/WatchFolderName.strin gs”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/French.lproj/WatchFolderName.string s”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/German.lproj/WatchFolderName.string s”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/Italian.lproj/WatchFolderName.strin gs”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/Japanese.lproj/WatchFolderName.stri ngs”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/Spanish.lproj/WatchFolderName.strin gs”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/cs.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/da.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/en_GB.lproj/WatchFolderName.strings ”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/fi.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/hu.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/ko.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/no.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/pl.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/pt.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/pt_PT.lproj/WatchFolderName.strings ”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/ru.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/sv.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/tr.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/zh_CN.lproj/WatchFolderName.strings ”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/zh_TW.lproj/WatchFolderName.strings ”
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
And tried to repair with these results:
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/WatchFolderName.strings ”
Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/WatchFolderName.strings ”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/English.lproj/WatchFolderName.strin gs”
Repaired “Applications/iTunes.app/Contents/Resources/English.lproj/WatchFolderName.strin gs”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/French.lproj/WatchFolderName.string s”
Repaired “Applications/iTunes.app/Contents/Resources/French.lproj/WatchFolderName.string s”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/German.lproj/WatchFolderName.string s”
Repaired “Applications/iTunes.app/Contents/Resources/German.lproj/WatchFolderName.string s”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/Italian.lproj/WatchFolderName.strin gs”
Repaired “Applications/iTunes.app/Contents/Resources/Italian.lproj/WatchFolderName.strin gs”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/Japanese.lproj/WatchFolderName.stri ngs”
Repaired “Applications/iTunes.app/Contents/Resources/Japanese.lproj/WatchFolderName.stri ngs”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/Spanish.lproj/WatchFolderName.strin gs”
Repaired “Applications/iTunes.app/Contents/Resources/Spanish.lproj/WatchFolderName.strin gs”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/cs.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/cs.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/da.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/da.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/en_GB.lproj/WatchFolderName.strings ”
Repaired “Applications/iTunes.app/Contents/Resources/en_GB.lproj/WatchFolderName.strings ”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/fi.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/fi.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/hu.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/hu.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/ko.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/ko.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/no.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/no.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/pl.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/pl.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/pt.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/pt.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/pt_PT.lproj/WatchFolderName.strings ”
Repaired “Applications/iTunes.app/Contents/Resources/pt_PT.lproj/WatchFolderName.strings ”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/ru.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/ru.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/sv.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/sv.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/tr.lproj/WatchFolderName.strings”
Repaired “Applications/iTunes.app/Contents/Resources/tr.lproj/WatchFolderName.strings”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/zh_CN.lproj/WatchFolderName.strings ”
Repaired “Applications/iTunes.app/Contents/Resources/zh_CN.lproj/WatchFolderName.strings ”
ACL found but not expected on “Applications/iTunes.app/Contents/Resources/zh_TW.lproj/WatchFolderName.strings ”
Repaired “Applications/iTunes.app/Contents/Resources/zh_TW.lproj/WatchFolderName.strings ”
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
Permissions repair complete
after the repair i did verify again and nothing has really changed.
I'm confuses. what have gone wrong with the permissions, libraries, .plists or account...
it does work better then before the formatting in terms of stabillity (safari used to crash a lot, left click menu is faster now, restarting also)
but of course, I can't live with the fact the system doesn't remember anything I do and acts almost like 'new' everytime I open an app or restart.
is it reversible, repairable, fixable, or should I go with the last preffered option on backing up everything from the Carbon Copy Cloner user.sparseimage I have created before formatting, and maybe revert everithing back, with all of the pros and cons?
Thank you for reading this.
have a nice one
Aviha

I had a similar problem with my Mid-2010 MBP after upgrading to LION and using Target Disk Mode wherein I simply dragged and dropoped my I-tunes Library from my other MBP to the newly updated one. I began getting the same permission error messages when using DU. The problem lies in the UIagent.app as indicated in the log. The ONLY way to correct this problem I found after literally weeks of heartache was to restore my MBP to factory settings and reinstall my apps and OSX in this way, EXACTLY this way: Yes, it may be regarded as overkill to most, but I guarantee that you will be saving yourself umpteen amounts of time and frustration blindly throwing a dart hoping to hit the bullseye. Please read and print this page before you begin.
1. reset PRAM click here to learn how to reset PRAM
2. COMPLETE format hard drive and reinstall of my ORIGINAL Operating System (using the grey installation disks provided to me when i bought the computer).:
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press theReturn key on your keyboard once. It will then present you with an Installation window.Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives.
Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in aName for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected apartition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quitDisk Utility. You can now follow the instructions on the install screen and install your Operating System (Snow Leopard). DO NOT MIGRATE ANY DATA OR USE TIME MACHINE. INSTALL FROM THE ORIGINAL DISKS ONLY.
After OSX Install, Insert your Applications Install DVD Disk and install.
Now run Software Update from the Apple Menu and update and Install any Updates.
3: Then BEFORE upgrading to LION and BEFORE migrating or copying any data to the new system via whatever source, you need to enable the Root User. But before you do this read here (and read it carefully) to leard about the "root" user.
4. After you are logged in as the Root user, you can now begin installing whatever Applications PACKAGES to your computer individually from either: A.) original cd/dvd install disk (recommended - if you have the disk, use it!), B.) Downloaded from the web (make sure you are using an ethernet/wired connection), C.) previously downloaded Application Package, or D.) by using Target Disk Mode via firewire connected to another Mac Apple doc.#58583. (DO NOT use time machine and do not drag and drop Applications to install - You can drag and drop the packages to the desktop and install but not by moving the wanted Applications Icon into the applications menu).
5. After you have the applications you want installed, run software update again and install any recommended updates.
6. Open Disk Utility and verify/repair the disk permissions. (if no issues are present, go to #7) You need to run repairs at least twice consecutively within the root account, restarting afterwards and logging in as Root again.
7. Open I-Tunes.Open Finder and move your I-Tunes library over by locating the Music folder which contains your music (i.e. /Users/**/Music/iTunes/iTunes Media/Music). DO NOT move the Music folder that is present as a subfolder to the user you are logged in as (i.e.: /Users/**/Music). Make sure it's the folder "Music" that is a subfolder of "I-Tunes Media" which contains all the actual subfolders of your library (i.e.: /Users/jmebenton/Music/iTunes/iTunes Media/Music/30 Seconds to Mars). The Music folder indicated in my example is the one you should drag and drop into your I-Tunes Music Library in the Open I-Tunes window.
8. After your music transfers, Open Disk Utility and verify/repair the disk permissions AGAIN. (if no issues are present, try to repair the permissions anyway) You need to run repairs at least twice consecutively within the root account, restarting afterwards and logging in as Root again.
9. Now transfer any files or data you need. (DO NOT UPGRADE TO LION YET)
10. LOG OUT and LOG IN as an Administrator (not the Root "Other User").
11. Install LION
12. When LION is completely installed, restart and log-in as the Root user.
13. Open Disk Utility and verify/repair the disk permissions AGAIN. (if no issues are present, try to repair the permissions anyway) You need to run repairs at least twice consecutively within the root account, restarting afterwards and logging in as Root again.
14. Disable the root user
Choose Apple menu > System Preferences, and then click Users & Groups.Open Users & Groups preferences
Click the lock icon to unlock it, and then type an administrator name and password.
In the Network Account Server section, click Edit.
Click Open Directory Utility.
Click the lock icon to unlock it, and then enter your administrator name and password.
Choose Edit > Disable Root User.
15. Now Log into your computer and ENJOY!!!

Missing Hard Drive Space After Failed BC Partition

Hello everyone,
I was just trying to install Windows 7 on my iMac (Late 2013) using the Boot Camp Assistant, but the partition process froze, so I ended up quitting Boot Camp (I know, I know, bad idea).
Now, I seem to be missing about a TB of hard disk space, even though the partition I was trying to create was only about 350 GB. My 3TB Fusion Drive is now showing 1.91 TB of space total. Also - probably related - everything is showing up as "Other", even though it used to be broken up into Audio/Movies/Photos, etc.
I attempted to start into Recovery mode, repaired the disk permissions (there were few problems, if any) and repaired the disk itself (it said that the Mac was fine), and I've looked at Disk Utility both in and out of Recovery mode to see if there's missing space in the partition tab, but it looks like it's just not there.
Strangely, here it recognizes that the disk is 3.12 TB, but I can't adjust the partition size, even in Recovery mode. I tried running Boot Camp again to see if I could just do a quick Windows partition (20 GB) and restore the space, but I get the error that the disk can't be partitioned. I tried doing fsck in Single User mode and logging in with Safe Mode (where I am now), just to see if either would fix the issue - but no luck.
I do have Time Capsule (2TB) so my stuff is backed up, and fortunately my Mac seems to run fine in normal mode, but is there any way to reclaim the "lost" space, or do a system wipe just to get everything back where it should be? This is
Let me know if I can provide any further information, and I appreciate your help!

Problem solved! Ran Disk Utility not in recover mode again, and it identified that the logical size wasn't right. Repair Disk while logged in - and at the upper level "Macintosh HD" on the left sidebar - fixed the issue, and I'm going to not attempt to run Boot Camp again for a while just in case :-p

IC intermittent SAPSQL_ARRAY_INSERT_DUPREC error after changing business partner

Hello,
after upgrading from CRM5 to CRM7 (Service for Employee), our Interaction Centre users started getting intermittent SAPSQL_ARRAY_INSERT_DUPREC screen dumps when clicking on the 'Save' button after having changed a partner number in the Partners Table of a Service Ticket.
On encountering one of these screen dumps, the user then has to close their IC session and then restart it - after which it is then possible to successfully 'Save' the same change to the same business partner on the same Service Ticket.
I have not been able to reproduce this error due to its intermittent nature.
Details of the source code extract from the ST22 dump is given below.
Has anyone else encountered such an issue themselves?
thanks,
Martin
Category ABAP Programming Error
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
ABAP Program SAPLCOM_PARTNER_DU
Application Component CRM-BF-PD
Date and Time 20.08.2014 11:15:25
Line SourceCde
41 * data definitions
42 DATA: BEGIN OF ls_attribute_record_to_use,
43 partner_guid TYPE crmt_partner_guid,
44 values TYPE text255. "has to be as long as the longest
45 "attribute structure
46 DATA: END OF ls_attribute_record_to_use.
47
48 DATA: lt_attribute_records_to_use LIKE SORTED TABLE OF
49 ls_attribute_record_to_use WITH UNIQUE KEY partner_guid,
50
51 lv_tablename TYPE tabname,
52 ls_attribute_record TYPE crmt_partner_attr_du,
53 lv_name TYPE char64.
54
55 FIELD-SYMBOLS: <values> TYPE ANY,
56 <address> TYPE crmt_partner_address,
57 <fs_insert_record> TYPE crmd_partner,
58 <fs_addr_ref_data> TYPE crmt_partner_address_reference.
59
60 FIELD-SYMBOLS: <wa_to_proceed> TYPE ANY,
61 <table_to_proceed> TYPE ANY TABLE.
62
63 DATA: wa_to_proceed TYPE REF TO data.
64 DATA: lt_wa_table TYPE REF TO data.
65
66 *** MAINTAIN PARTNER RECORDS *******************************************
67
68 *** records to insert
69 IF NOT it_partner_records_to_insert IS INITIAL.
70
>>>>> INSERT crmd_partner FROM TABLE it_partner_records_to_insert.
72 IF sy-subrc NE 0.
73 MESSAGE a002(com_partner) WITH gc_object_name_partner.
74 ENDIF.
75
76 ENDIF.
77
78 *** records to delete
79 IF NOT it_partner_records_to_delete IS INITIAL.
80 DELETE crmd_partner FROM TABLE it_partner_records_to_delete.
81 IF sy-subrc NE 0.
82 MESSAGE a002(com_partner) WITH gc_object_name_partner.
83 ENDIF.

Hello Atul,
thanks for your message. I have had a look at the SAP notes that you have pointed me to, however they unfortunately do not relate to the functionality where we are encountering this problem:
1914117 - Relates to Sales (not Service {Employee})
1823316 - This error occurs in the wrong FM (BUR_BUPR_UPDATE) rather than FM COM_PARTNER_UPDATE_DU.
1809361 - Relevant for the SAP GUI transaction, 'BP', not the Interaction Centre which iswhere this error is occuring.
SAP have not been able to help because of its intermittent nature, it is not possible to create this error on demand, and as I am working on a secure site SAP cannot open a remote connection.
thanks,
Martin

Portal Run time error after changing the logon screen

Hi all,
I am running an EP7 SP08 and I try to change the logon screen as described on:
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
I copied the 'com.sap.portal.runtime.logon.par.bak' file, renamed it to 'my.new.logon.par'. after that I extracted the file with winzip. I opened the directory 'PORTAL-INF\lib\' and there I extracted the file 'umelogonbase.jar' with winrar. I opened the file 'logonLabels_en.properties' and changed the entry 'xtit_WELCOME=Welcome' to 'xtit_WELCOME=blablabla'.
I repacked the umelogonbase.jar with winrar again and after that I repacked the 'my.new.logon.par' with winzip again.
Then I placed the par file back at '<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd' and changed the authscheme.xml with the new par file and changed the 'login.authschemes.definition.file' all described on the help.sap.com url mentioned above.
However, when I restart the portal and open the logon screen I see the error message:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
See the details for the exception ID in the log file
The default trace shows the following message:
An error occured during authscheme computation.
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : my.new.logon.certlogon
Is there anyone who knows what goes wrong? The description on help.sap.com is very straightforward but still it doesn't work for me...
Any help would be appreciated.
Kind Regards,
Nico van der Linden...

Hi,
Check if you did the following steps pertaining to the authschemes.xml file:
--> Download the authschemes.xml to local drive. Rename the file to,say, authschemes_new.xml
--> In authschemes_new.xml, did you change <b>all</b> entries of com.sap.portal.runtime.logon with the name of modified logon par file?
-->Upload the authschemes_new.xml file using configtool; and, change the property login.authschemes.definition.file to authschemes_new.xml in configtool.
-->Finally,restart your portal. Hope it helps.
Regards,
M.Subathra

Crystal report error after changes in BW-query

Dear all,
we have an problem concerning crystal report (CR 2008) based on SAP BW (3.5).
If we make any (simple) changes on the BW-Query the Crystal report canu2019t be use any longer. We get an error message and forced to create a new one. Does anybody know a solution for this problem?
Thanks
Hagen

Hi Ludek,
the error message is the following:
Data couldn't released from database.
After having pressed the OK-button the errormessage is:
Database connector error: 'BAPI-Error #:0
Invalid MDXcommand at ....

HTTP 404 error after changed tablespace and password of schema FLOWS_FILES

Hi I have a problem of having HTTP 404 not found error for file upload in my apex app by submiting a page. When it goes to http://xxx.xxx.xxx:8080/apex/wwv_flow.accept after unlocked , changed password and change tablespace for the account FLOWS_FILES.
Is there anyone can help ?
Thanks in advance.

Hi Scott,
Yes, I have modified the bug tracker application to support file upload by using a file browser object and created a "file_upload" table under the workspace schema to keep the linkage with the table WWV_FLOW_FILE_OBJECTS$. The application works fine before but after I realize that the FLOWS_FILES schema can be unlocked and the free space in default tablespace SYSAUX has almost been used up more than 99%, so I first unlock the account FLOWS_FILES, then changed the password and move the table WWV_FLOW_FILE_OBJECTS$ to tablespace FLOW_1 and changed the default tablespace and then rebuilt the index. I have moved the table back to SYSAUX tablespace now and have rebuilt the index also. However, upload a file and then press 'apply change' in the 'create issue log details' page, it gets the error HTTP 404 but if I do not attach any file. It goes without an error. The only thing I changed is on the database side of the FLOWS_FILES schema, so I think the problem resides on it but I don't know why even I moved the table WWV_FLOW_FILE_OBJECTS$ back to SYSAUX, rebuilt the index but still it doesn't work.
Is that good even explanation ?
btw, I am using IIS and how can I see the webserver error ?
Regards,
Edward

Missing +x perm error after changed Dovecot partition-default

Similar Messages

Maybe you are looking for