Missing zoom slider and padlock, in Library mode

Hi, The Compare zoom slider and padlock, in Library mode is missing from my main screen and only appears in second window, if this is selected. Is this a modification with LR5.6 or do I need to do something to select this feature? I find the compare function much easier to use on the main screen rather than in second window.

The padlock and slider should show on both displays but perhaps you have the toolbar hidden. Try pressing the T key once or twice to toggle the toolbar.

Similar Messages

Can't zoom in and out in camera mode on blackberry curve 8520

Hi IM Carlos and im new to this phone and I had a couple weeks now and I used the camera on my phone and was able to zoom in and out before but now it wont let me zoom in and out and I tried the shortcuts that it came with but nothing works can anyone help please

With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
Now, try the camera zoom again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Importing my video from my event library into my project library, it shows the full width of the clip, but on the viewing section, it's zoomed in and cut the sides of the video off. How do I stop this from happening?

When importing my video from the event library to the project library, it's zooming in and
narrowing the width of my footage. How do I stop this from happening?

In the project, double-click on the clip to open the Clip Inspector. In the Clip tab you will see an item about two thirds down labelled "Stabilization". If checked, uncheck the box "Smooth clip motion".
Stabilizing clips causes a zoomed in effect, with the extent of the zoom dependent upon how shaky the footage is. There is a slider beneath the check-box labelled "Maximum Zoom" - this can be draggged back and forth to adjust the zoom effect if desired, once the clip has been stabilized.
You may have chosen to analyze clips for stabilization when importing to iMovie (that's a choice provided by iMovie upon import). If so, it's best to turn off an option in iMovie's preferences. Go to this from the iMovie menu item iMovie>Preferences. Click on the Browser tab and deselect (uncheck) the box labelled "Automatically stabilize clips that have been analyzed".
I prefer to import clips without analyzing, as this speeds up the import process. Afterwards, in the Event you can check for any overly shaky clips, then analyze them in the Inspector. If necessary, once dropped into a Project, you can stabilize them as desired. You can also stabilize clips directly in the Project without having to first analyze them in the Event.
John
Message was edited by: John Cogdell

All my photo's are missing from iPhoto and I'm getting a message "your photo library is either in use by another application or has become unreadable"

Yesterday when I opened iPhoto all of my photo's were missing. After many hours of frustrating time looking how to resolve, I decided to try again this morning. When I tried to open iphoto, I got the message I referenced above regarding the library is either in use or has become unreadable.
My photos are not in iPhoto anymore. There's nothing there. iphoto acts like its never even been set up. I have iPhoto '11 version 9.4.3. I have OS X Lion version 10.7.5. However, when I go to "All My Files" and then under "images", there are over 10,000 images. I see my photos (I guess it's all of them - i have no idea how many there were) and other "images" also. When i go to "pictures" I only see the 15 or so items I have scanned. In "iPhoto Library", there is 1 picture of what looks like a deck of playing cards with flowers on them - I don't know where that came from. But also in "iPhoto Library" under the heading "desktop", it shows a size of over 27GB and under "kind" it says "package". Still under desktop and "Photo Booth Library" it shows 53GB and under "kind" it says "Photo Booth Library". Before I opened iPhoto to view my photo's, I went to "empty trash" yesterday (not in iPhoto) and it showed over 65,000 items to delete. There were no more than 200 that I could actually see. So, I don't understand. I let it delete a couple of thousand before I stopped it because I didn't know what it was doing. I know - not too smart. I don't know if that has anything to do with iPhoto or not; I'm just throwing that out there. Today I went to "empty trash" and it now shows the 200 items that I can see in there. Don't know what happened.
I do have a time capsule but not sure if I’m using it correctly. If you were to tell me to restore to a certain point, I’d have to be walked thru the process.
I downloaded “iPhoto Library Manager”, not exactly sure how to use it, but got a message basically saying the library nor the database could be loaded and that album data file for the library “iPhoto Library” could not be read.
I’ve spent hours and hours and hours searching the web for answers but I’m scared to do much of anything thinking I could end up losing all my photos if I haven’t already.
Please help!
Thank you!
James

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

In Lightroom 3 I am in Library mode in the Grid View and need to rearrange images, but it is not allowing me to move them.

In Lightroom 3 I am in Library mode in the Grid View and need to rearrange images, but it is not allowing me to move them.

I don't do a lot of dragging to custom arrange my images. But the custom order is right at the bottom of the list of sort orders on my computer.
Added later: But don't worry about the custom order. It doesn't make any difference on my system. Are you sure you are dragging the image itself, and not the border around the image?

How to add a navigation Panel and Zoom Slider Bar using Java API

Hello,
I am using Mapviewer Java bean as I have to use Oracle Mapviewer in Java Stanalone application.Please can anyone tell me how to add a Navigation panel and Zoom Slider in Java API. I found the API s for same in Java Script but not in Java.Kindly help.
I am using Oracle Mapviewer 11g.

This is forum sponsored by Adobe make of Acrobat and Reader. Since Chrome and FireFox web browser have chosen to use their own viewer you might get more help in their forums or customer support.

I have selected Print and a image is shown. When selected in library mode the image I want is shown, different image in print mode? How do I get the image in library mode to show and print?

When I select an image in library mode the image I want it is shown. When I go to print mode a different image is shown. Why doees this happen? How do I get my required image to show and print?
Thanks, Bob

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I am unable to zoom in or zoom out unless in full screen mode. I have tried with both my scroll mouse and with CRTL - and +

I am unable to zoom in or zoom out unless in full screen mode. I have tried using my scroll mouse and also using CTRL - or +. This is only in Firefox. it works in IE.

Some gestures have been removed in Firefox 4 and later.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

Option to allow filmstrip to work the same in both develop and library mode

First of all, let me say that one of the greatest features that LR2 brings to the table it the keyboard shortcuts for adjusting things in develop mode. That is the single improvement that has really made a HUGE difference in editing images the way I work.
I'm so happy to be able to get almost everything on the keyboard, that I wanted to point this out.
When in library mode, I can select a series of images in a row using shift + an arrow key. When I'm done adjusting the images, I can press the right arrow key, and I've now effectively deselected all the previous images, and gone on to the next one. This is intuitive and makes sense to me.
But in Develop mode, pressing the right arrow key swings me back around to the first image on the left.
Perhaps for the way some people works, this makes a lot of sense. For me, there's no reason that I would need to do this.
Of course I can deselect all photos (apple-D), but then to get back on track, I have to go to the mouse to select the next image. I would like the option of having the filmstrip act the same way in both modes.
Another solution would be to continue to allow the "Select only active photo" shortcut that is available in Library mode, but for some reason is not available in Develop mode.
Yes, this is a small change, but I feel like things are getting so close to perfect that I wanted to chime in with something that in the end I think will really help to speed up people who have to work through and adjust a large number of images.

Hi,
If the songs were purchased from itunes, I suggest that you delete the tracks from your itunes library and move to trash (providing you live in a country that permits redownloading). See http://support.apple.com/kb/PH12283.
Jim

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks? What do I need to do dif

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks?
What do I need to do differently?

The late, great Pondini was investigating that issue before he passed away.
See here: https://discussions.apple.com/thread/5125969
I think there might be information there on how to reset Time Machine to do a full backup. I think you basically have to reset it and start over.

TS1559 My ipod wifi slider button is in grey mode and I cant slide it across from off to on, any suggestions?

My ipod wifi slider button is in grey mode and I cant slide it across from off to on, any suggestions?

ok hit the level down sound home and power button at the same time happen to me to really anoying

Missing movie files in my project since iOS 8 and iCloud Photo Library

Hello all,
I've been to New York at the start of 2014 and created an awesome movie project in iMovie for iOS. That was when iOS 7.1.2 was the most current release. Today, I wanted to finish up my project. I'm currently running iMovie 2.1.1 on iPad air 1 running iOS 8.1.2 and iCloud Photo Library is enabled since day one. I Opened the project today and iMovie told me there are missing movies in the project and offered me to search for them. It only found 2 out of 140 or something. Now my project timeline is filled with clip with exclamation marks and many transitions with pictures in them are missing too. I tried to download clips that are in iCloud by tapping the Cloud icon but iMovie still cannot find them. Ive also tried importing from iCloud drive, disabling iCloud photo library and syncing the movies from iPhoto using iTunes on my iMac but iMovie cannot link them to the project. I'd hate to see hours of editing work to go down the drain.
Hope someone can help.
RF

Ok, so sinc you turned iCloud photo library, that automatically delets all of your current photos. I found that out the hard way. I'm sorry to hear that your editing has gone to waste. It is still odd that some media was saved though.

Missing movies in project since iOS 8 and iCloud Photo Library

Hi,
I've been to Europe this summer and created a movie in iMovie for iOS. That was when iOS 7.1.2 was the most current release. Today, I wanted to finish up my project. I'm currently running on iPad air, iOS 8.0.2, latest release of iMovie and iCloud Photo Library is enabled since day one. Opened the project and iMovie complained there was missing movies and offered me to search form them. It found 19 out of 40 or something. ***??? Now my movie timeline is filled with clip with exclamation mark and many transitions with pictures in them are missing too. I tryed to download clip that where in iCloud by tapping the Cloud icon but iMovie still cannot find them. How am I supposed to fix this now? My clips are there but iMovie cannot link to them... Apple, are you reading this forum?
JF

I recreated this same question here so it wouldn't show like its solved: Missing movie files in my project since iOS 8 and iCloud Photo Library
Hope we get an answer.

When the phone is in protection mode lock and comes a missed call .. and when you scroll to the number, the phone call is in safety mode ... I want a solution to this problem .. Thanks

When the phone is in protection mode lock and comes a missed call .. and when you scroll to the number, the phone call is in safety mode ... I want a solution to this problem .. Thanks

I've tried to respond to your post, but I cannot understand what you are asking. Also not a good idea to post your personal information on a public forum. I've asked the moderator to edit the post.
Now, please explain what safety mode means, and we will try to help.

I changed drives and consolidated my library, but many files are missing

I recently changed my the hard drive on which my iTunes media were stored. I followed instructions on this page:
iTunes for Mac: Moving your iTunes Media folder
However, after consolidation I discovered that quite a lot of folders and files are missing from the new created file. The missing songs are still in my library, and when I try to play them, I get the exclamation mark and have to direct iTunes to the original files on the old hard drive.
I've restarted everything and tried to consolidate again and again, but the files remain missing.
What should I do?
All advice gratefully received.

I am not doing it in ITunes, but i did down load the song from ITunes. I loaded the song on to my Nano, but in my menu selections it doesn't show the song or the artist in any search format. However, when i plug in my nano to my PC I see the Nano library on my PC drive listings and that song and artist are there. I can click on the song and it will play in Windows media on my work PC. I did notice that the format for most all the songs in my library on my Nano are MPEG - 4 audio Files.
Thanks for your help, Mel

Missing zoom slider and padlock, in Library mode

Similar Messages

Maybe you are looking for